Chi Mei Communication Systems 0907SEU GSM DUAL-BAND MOBILE PHONE User Manual SEG QSG EN

Download:
Mirror Download [FCC.gov]
Document ID	1151969
Application ID	QMHTDotwjlYPSVyE4BqJ3Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	148.13kB (1851621 bits)
Date Submitted	2009-08-11 00:00:00
Date Available	2009-09-25 00:00:00
Creation Date	2009-07-31 17:21:42
Producing Software	Adobe Acrobat 8.0
Document Lastmod	2009-08-06 11:14:46
Document Title	SEG_QSG_EN.book
Document Creator	Adobe Acrobat 8.0 Combine Files
Document Author:	karenchen

Your Phone ...................................................................1
SIM Card and Battery Installation..................................2
Solar Charging...............................................................3
Get the best from your solar charging phone ................4
Screen Display and Icons..............................................6
Making a Call.................................................................7
Answering or Rejecting a Call .......................................8
Contacts ........................................................................8
Messaging .....................................................................9
Phone Settings ............................................................11
Safety & Compliance Certificate..................................... i
Table of Contents
Table of Contents
Quick Start Guide
Your Phone
USB
connector
Earpiece
Solar
panel
Display
screen
Navigation key
Right soft key
Left soft key
Back key
Cancel/Power key
Confirmation key
Keypad
a/A
1
1.
Speaker
2.
Wrist strap
holder
Turning the
Phone On/Off
To turn the phone
on/off, press and
hold the Cancel/
Power key for 3
seconds.
1.
Place your finger in the finger
slot and remove the cover.
2.
Insert the SIM card in the
card slot. Make sure the gold
contacts are facing down and
the cut-off corner facing
downwards from the top of
the device.
3.
Insert the battery. Make sure
the contacts of the battery
are aligned with the
connectors on the battery
compartment.
4.
Align the tabs with the holes
on the phone and push to
close the back cover.
Quick Start Guide
or
SIM Card and Battery Installation
er
ap
2
Quick Start Guide
Removing the battery
Insert your finger in the finger slot,
then gently lift the battery to
remove it.
Solar Charging
Charging the battery
1.
3
To fully charge the battery, charge
it for 2 hours.
Battery life may vary depending
on the application.
With the battery inside the
compartment, connect the
USB adapter to the phone.
2.
Plug the USB adapter into a
wall outlet to start charging.
3.
A “Charging” message will
appear on the screen.
The phone can also be charged
using sunlight.
• To charge via sunlight, face the
Solar panel of the device in the
direction of sunlight.
• Under maximum direct sunlight,
1 hour of charge will give 12
hours of standby time or 12
minutes of talktime.
• Solar charging turns off at 60°C
to protect your phone.
•
indicates charging under
weak sunlight.
•
indicates charging under
strong sunlight.
• P
g
he
he
ht,
°C
Get the best from your solar charging phone
• Position the phone so the panel
is directly facing the sun. From
time to time you may need to
reposition the phone. Tilting the
phone towards the sun will help.
• The best time of day to charge
is between 10am and 2pm
when the sun is at its brightest.
Quick Start Guide
ge
1 Hour Maximum Sun
Talk Time
Standby
12 minutes
12 hours
• Glass blocks solar energy,
especially when it is tinted, such
as the glass used in a car or
office building. Avoid anything
which reduces the amount of
light (such as clouds, shadows
etc).
• To avoid damaging your phone
or decreasing its effectiveness,
do not place it inside a car for
4
Quick Start Guide
5
long periods of time. This environment can get extremely hot
• The phone will give a warning
beep every 150 seconds if it
gets too hot. Please place the
phone somewhere cooler if this
happens.
on
dis
rig
When the phone is turned
on, the main screen is
displayed as shown on the
right.
Mobile
00:02
01-Jan-00
Calls
Icon
Description
Menu
Icons area
Text and graphics area
Soft key indications
• To select Calls, press the left soft key.
• To select Menu, press the right soft
key.
Soft key indications may vary.
Icon
Description
Indicates network signal strength.
Indicates the phone line in use.
Indicates a message has been
received.
Indicates missed call.
Indicates the phone is in Silent mode.
Indicates the phone is in Meeting
mode.
Indicates the phone is in Outdoor
mode.
Quick Start Guide
Screen Display and Icons
Indicates the battery charge, level 3 0.
Note: A moving battery bar indicates
that the battery is charging.
Indicates the phone is in Car mode.
Indicates the alarm is set.
Indicates the phone is in Home mode.
Indicates the phone is in Office mode.
Indicates charging under weak
sunlight.
Indicates charging under strong sunlight.
6
Quick Start Guide
Making a Call
1.
2.
Enter the phone number on
the keypad.
Select the Call option using
left soft key.
3.
΅Π͑ΔΒΝΝ͑ΒΟ͑ΚΟΥΖΣΟΒΥΚΠΟΒΝ͑ΟΦΞΓΖΣ͑͝ΡΣΖΤΤ͑
ΒΟΕ͑ΙΠΝΕ͑͑͡ΥΠ͑ΕΚΤΡΝΒΪ͑ΥΙΖ͑ΚΟΥΖΣΟΒΥΚΠΟΒΝ͑
ΒΔΔΖΤΤ͑ΔΙΒΣΒΔΥΖΣ͑“+” ΥΙΖΟ͑ΖΟΥΖΣ͑ΥΙΖ͑
ΡΙΠΟΖ͑ΟΦΞΓΖΣ͟
To make a call from Contacts
1.
2.
7
Press the Down key to view
Contacts list.
Enter the first letters of the
Contact you wish to call.
The phone filters the list
based on the characters you
enter.
Use the Up and Down key to
select the Contact, then
Select the Call option using
left soft key.
To make a call from the
Dialed list
1.
2.
3.
Select the Call option using
left soft key to view Dialed
list.
Use the Up and Down key to
select the call.
Select the Call option using
left soft key.
To
the
To
1.
2.
3.
4.
5.
ou
to
to
To answer an incoming call, press
the Call key.
To reject a call, press the Right
Soft key to select Busy.
Contacts
To add a Contact
To copy SIM Contacts
1.
2.
1.
3.
4.
5.
Enter the phone number.
Select Options > Save
number.
Select New contact > Add.
Enter the name of the
contact.
Select Save to save the
Contact.
2.
3.
Quick Start Guide
Answering or Rejecting a Call
Select Menu to activate the
main menu.
Select Contacts > Options >
Settings > Copy from SIM >
Copy all.
Select Yes to confirm.
΅Π͑ΔΠΡΪ͑ΚΟΕΚΧΚΕΦΒΝ͑ʹΠΟΥΒΔΥΤ͑ΗΣΠΞ͑΄ͺ;͑͝
ΤΖΝΖΔΥ͑ʹΠΡΪ͑Β͑ΟΦΞΓΖΣ͑ΥΙΖΟ͑ΤΖΝΖΔΥ͑
ΖΒΔΙ͑ΔΠΟΥΒΔΥ͑ΥΠ͑ΔΠΡΪ͟
8
Quick Start Guide
To create Groups
1.
2.
Select Menu > Contacts >
Options > Settings >
Groups.
Select New group > Add.
3.
4.
5.
Enter the Group name and
select Continue.
Use the Up, Down and
select Select to select the
Contacts to add to the Group.
Select Done to save.
Messaging
Sending a text message
1.
2.
3.
4.
9
Select Menu > Messages >
Create message > Enter
phone no.
Enter the phone number to
send message to.
Type your message.
Select Send to send the
message.
΅Π͑ΤΖΟΕ͑ΞΖΤΤΒΘΖ͑ΥΠ͑Β͑ʹΠΟΥΒΔΥ͑͝ΤΖΝΖΔΥ͑
;ΖΟΦ͑ͯ͑;ΖΤΤΒΘΖΤ͑ͯ͑ʹΣΖΒΥΖ͑ΞΖΤΤΒΘΖ͑
ͯ͑ʹΠΟΥΒΔΥΤ͑ΝΠΠΜ͞ΦΡ͑
Entering Text
• Press
repeatedly to toggle
between Abc, ABC, and abc.
• Select Options > Add
symbol to insert symbols.
Pr
You
pre
allo
pre
To
sel
OF
As
wil
the
aga
wo
you
inc
oth
the
ent
ΖΔΥ͑
ΘΖ͑
c.
Your phone comes with the
predictive text input feature that
allows you to enter text by
pressing only one key per letter.
To disable the predictive text input,
select Options > Dictionary >
OFF.
Quick Start Guide
up.
Predictive text input
As you enter a word, the phone
will automatically compare all of
the possible letter combinations
against a built-in dictionary of
words, and determine which word
you intended to type. If it guesses
incorrectly, you can scroll through
other possible words by pressing
the Up and Down keys without reentering the word.
10
10
Quick Start Guide
Phone Settings
To adjust volume
During a phone conversation,
press the navigation key to
increase or decrease the volume.
To
•
•
•
•
΁ΣΖΤΤ͑ΒΟΕ͑ΙΠΝΕ͑ΥΙΖ͔͑͑ΜΖΪ͑ΥΠ͑΢ΦΚΔΜΝΪ͑
ΤΨΚΥΔΙ͑ΥΙΖ͑ΡΙΠΟΖ͑ΥΠ͑΄ΚΝΖΟΥ͑ΞΠΕΖ͟
To set the ringtone
1.
2.
3.
4.
Select Menu > Settings >
Sounds & alerts >
Ringtone.
Select Line 1 calls or Line 2
calls.
Select the ringtone from the
list.
Press the Confirmation key.
To adjust other settings, the
following submenu items are
available:
• Ring volume
• Silent mode
11
11
Increasing ring
Vibrating alert
Message alert
Key sound
To set the alarm
1.
From the main screen, select
Menu> Applications>Alarm
> Alarm.
To set recurrent alarm, select
Menu > Applications>Alarm >
Recurrent alarm.
2.
3.
Enter the time to sound the
alarm.
Press the Confirmation key
to save settings.
1.
2.
3.
4.
To
1.
2.
3.
To
•
ect
rm
ey
To reset all settings
1.
You can easily reset the phone to
its default settings.
2.
3.
4.
From the main screen, select
Menu > Settings > Initial
Setup > Time & date.
Select the submenu to
change.
Enter the desired value.
Press the Confirmation key
to save settings.
To change profile
1.
2.
3.
Select Menu > Settings >
Profiles.
Select profile from the list.
Press the Confirmation key.
Select Menu > Settings >
Initial Setup > Reset
settings.
2. Select Continue > Continue
to start the reset.
To reset all settings and erase all
user data select Menu > Settings
> Initial Setup > Master Reset.
1.
Quick Start Guide
͑
To change the date and time
΅ΙΖ͑ΕΖΗΒΦΝΥ͑ΤΖΔΦΣΚΥΪ͑ΔΠΕΖ͑ΚΤ͑
͟͡͡͡͡͡͡͡͡
To lock / unlock keypad
• Press the
key, then select
Lock / Unlock.
a/A
12
12
Quick Start Guide
i
Safety & Compliance Certificate
SAFETY INFORMATION
• Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized
accessories may void your warranty.
• Do not remove the battery while the phone is charging.
• Avoid using the phone near electromagnetic souces such as TVs, radios, and microwave ovens.
• Unplug the power adapter from the wall outlet during lightning storms to avoid electric shock or fire.
• Do not store your phone in temperatures higher than 60ºC or 140ºF.
• Do not use harsh chemicals or detergents to clean your phone.
• Do not handle the phone with wet hands while it is being charged. This may cause an electric shock
or serious damage to the phone.
SAFETY PRECAUTIONS FOR BATTERY USE
• Use only an approved battery.
• Keep the battery dry and away from any liquid since this may cause a short circuit.
• Keep the battery away from metal objects since this may cause a short circuit.
• Do not use damaged or deformed batteries.
• If the battery emits a foul odor, discontinue use.
• Keep the battery away from babies and small children.
• If the battery leaks:
• Do not allow the leaking fluid to come in contact with your skin, eyes or clothing. If already in
contact, rinse with clean water immediately and seek medical advice.
• Keep the battery away from fire since this may cause the battery to explode.
• Do not attempt to open or service the battery yourself.
• Do not dispose battery in fire or water.
• Recycle or dispose used batteries according to the local regulations.
ROAD AND ENVIRONMENTAL SAFETY
• Turn off the phone in areas with a potentially explosive atmosphere or where flammable objects
exist such as gas stations, fuel depots, and chemical plants among others. Sparks from these areas
could cause explosion or fire and result in injury or even death.
• Do not use hand-held phones while driving a vehicle. Use hands-free devices as an alternative.
SAF
• D
to
th
DEC
Cop
FCC
You
prox
sub
this
ope
use
WE
The
dum
was
was
the
the
For
colle
whe
RoH
This
Cou
elec
s.
fire.
ock
eas
DECLARATION OF CONFORMITY
Hereby, we declare that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/.
0682
Copyright © 2008. All Rights Reserved.
Quick Start Guide
ed
SAFETY IN AIRCRAFT
• Do not use the phone on board an aircraft. The phone’s network signals may cause interference
to the navigation system. As a safety measurement, it is against the law in most countries to use
the phone on board an aircraft.
FCC NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
WEEE Notice
The WEEE logo on the product or on its box indicates that this product must not be disposed of or
dumped with your other household waste. You are liable to dispose of all your electronic or electrical
waste equipment by relocating over to the specified collection point for recycling of such hazardous
waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at
the time of disposal will allow us to help conserve natural resources. Moreover, proper recycling of
the electronic and electrical waste equipment will ensure safety of human health and environment.
For more information about electronic and electrical waste equipment disposal, recovery, and
collection points, please contact your local city center, household waste disposal service, shop from
where you purchased the equipment, or manufacturer of the equipment.
RoHS Compliance
This product is in compliance with Directive 2002/95/EC of the European Parliament and of the
Council of 27 January 2003, on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS) and its amendments.
iiii
Quick Start Guide
European Union Regulatory Conformance
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz). This equipment meets the following conformance standards:
EN301489-1, -7, EN 301 511, EN62209-1, EN60950.
Changes or modifications to this product not authorized by the manufacturer could void the EMC
compliance and negate your authority to operate the product. This product has demonstrated EMC
compliance under conditions that included the use of compliant peripheral devices and shielded
cables between system components. It is important that you use compliant peripheral devices and
shielded cables between system components to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
We, hereby, declare that this cellular radio is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
SAR Information
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile
device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These guidelines were developed by the
independent scientific organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the Specific
Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 W/kg averaged over
10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of
an operating device can be below the maximum value because the device is designed to use only
the power required to reach the network. That amount changes depending on a number of factors
such as how close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.937 W/kg. Use of device accessories and
enhancements may result in different SAR values. SAR values may vary depending on national
reporting and testing requirements and the network band. Additional SAR information can be found
on the Cellullar Telecommunications Industry Association (CTIA) website at www.wow-com.com.
iii
iii
FCC
• Th
co
an
• Th
pu
ag
ra
int
int
an
-Re
-Inc
-Co
con
-Co
Cha
the
• Th
an
This
This
freq
The
Abs
usin
cert
C
MC
nd
ile
dio
ver
vice
l of
nly
rs
und
Quick Start Guide
s:
FCC Regulations:
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
• This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiated radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• The antenna(s) used for this transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
This model phone meets the government’s requirements for exposure to radio waves.
This phone is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless devices employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted
using standard operating positions accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is determined at the highest
iv
Quick Start Guide
certified power level, the actual SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate at multiple power levels so as to
use only the poser required to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is
1.47 W/kg for GSM850 / 0.998 W/kg for PCS1900 and when worn on the body, as described in this
user guide, is 0.81 W/kg for GSM850 / 0.252 W/kg for PCS1900.
While there may be differences between the SAR levels of various phones and at various positions,
they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID: QDJ-0907SEU
This device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/
IEEE C95.1-1999 and had been tested in accordance with the measurement methods and
procedures specified in OET Bulletin 65 Supplement C.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines
for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm
from the body. Use of other enhancements may not ensure compliance with FCC RF exposure
guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear,
position the handset a minimum of 1.5 cm from your body when the phone is switched on.
v
Wa
Fol
use
- It
su
-D
-I
-T
-In
-D
ar is
his
ns,
vels
del
Warnings and Safety
- Use only in closed and dry areas.
Follow the below safety instructions to
use the phone.
- Should the unit fail to operate, or
show signs of not operating properly
unplug immediately and make sure
that the unit is not put into further
operation. Do not use the unit when
visible signs of damage - due to
transport or inadequate storage are
noticeable.
- It is safe to point the Solar panel to the
sun.
- Do not use the unit:
- In places which are dusty, damp. In a
high humidity area (over 80% rel.
humidity).
- Temperatures above 60°C to prevent
battery damage.
Quick Start Guide
s to
ase
- To prevent the risk of explosion by
overcharging, install the battery in a
well ventilated place.
-In areas containing inflammable
materials (liquids/solvents, gas).
- Do not immerse in water.
es
cm
vi


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : karenchen
Create Date                     : 2009:07:31 17:21:42+08:00
Modify Date                     : 2009:08:06 11:14:46+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2009:08:06 11:14:46+08:00
Creator Tool                    : Adobe Acrobat 8.0 Combine Files
Format                          : application/pdf
Title                           : SEG_QSG_EN.book
Creator                         : karenchen
Document ID                     : uuid:c24a6c00-a499-4ce6-80af-bc7785226c71
Instance ID                     : uuid:2b669527-3111-4c7e-8188-b1c78dc56a60
Producer                        : Adobe Acrobat 8.0
Page Count                      : 21

EXIF Metadata provided by EXIF.tools