Chiayo Electronics Co Q-1002 Wireless microphone transmitter User Manual rev01
Chiayo Electronics Co Ltd Wireless microphone transmitter rev01
user manual rev01
HAND-HELD Microphone Handheld Microphone Parts and Functions (Q-1002) Battery status LED indicator Battery cover compartment Fig.1 Metal Grille ( Capsule module inside) Power Switch Battery Installation Q-802 uses 1 piece of 9V battery. To install new or replace the old battery, First unscrew the battery cap from the battery compartment, then insert the new battery according to its correct polarity as indicated. For longer Operation hour, Alkaline battery is recommended! Fig.2 III After putting the battery cover back to the housing, slides the switch to "ON" position as shown in Fig. 3. Fig.3 As soon as the switch is on, the battery-status indicator will give a flash, indicating a normal operation. If there is no flash, it indicates either power supply is not available or battery is installed wrongly. III After switching on, the RF signal indicator LED(s) of matching receiver will light up, indicating the microphone signal transmission is in normal operation. Switch off the power switch when the microphone is not in use, meanwhile, remove the battery out of microphone if it is not in use for an extended period.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:06:28 07:51:03+02:00 Create Date : 2004:04:14 17:08:42-06:00 Creator : HP PDF Formatter version 1.0.0.229 Page Count : 5 Mod Date : 2004:06:28 07:51:03+02:00 Creation Date : 2004:04:14 17:08:42-06:00 Producer : Adobe PDF Library 5.0 Metadata Date : 2004:06:28 07:51:03+02:00 Has XFA : NoEXIF Metadata provided by EXIF.tools