Chic Technology CKM50XXX Wireless Keyboard User Manual PMU CKM00014 NEW

Chic Technology Corporation Wireless Keyboard PMU CKM00014 NEW

users manual

Intelligent Wireless Keyboard User's GuideNotice:Federal Communications Commission (FCC) requirements, Part 15This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.Congratulations on your purchase of the Intelligent Wireless Keyboard. Please carefully read the User's Guide to learn about the installation and the convenient Internet and multimedia functions of your new Intelligent Wireless Keyboard.1. Contents of Package1) Intelligent Wireless Keyboard2) Receiver (PS/2) 3) Three AA Batteries4) Driver CD-ROM5) User's Guide2. Install Hardware2-1. Install the Receiver with a PS/2 Connector1) Please turn off your PC.2) Plug the PS/2 connector of the receiver into the PS/2 keyboard port of the PC.2-2. Select the Keyboard Channel1) The two-channel switch is located on the back, right-hand side of the keyboard, which is next to the link button. Select channel "1" or "2".2) Put the batteries into the battery case2-3. Link the Intelligent Wireless Keyboard with the Receiver Notice: The locations of the channel link button and the LED indicator may be different due to various receiver shapes.1) Please turn on your PC. The LED indicator on the receiver will light.2) Press the ID Link Button on the receiver and the LED indicator will blink. The receiver is ready to automatically link with the keyboard.3) Press the ID Link Button on the back of the keyboard and the LED light on the receiver will blink quickly while you successfully finish the keyboard linkage.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.4) The LED indicator on the receiver will light steadily while you complete the linkage.5) The LED indicator of the receiver will blink while you use the keyboard.6) If you need to re-link the keyboard or after changing the batteries, please repeat the above linkage instructions.7) If the selected channel is interfered by other wireless keyboard users nearby, please change the Link ID by re-linkage or select the other channel immediately.8) There are 256 changeable IDs for each channel.3. Install Driver3-1. Notice1) The driver supports Windows 95, Windows 98, Windows NT, Windows 2000, Windows ME and Windows XP.2) The driver CD-ROM may content the drivers of keyboards and mice. Please select to install the keyboard driver at the pop-up window. 3) The PC system may automatically install the driver.3-2. Install the Keyboard Driver1) Insert the driver CD-ROM to your PC.2) If the driver CD-ROM does not be automatically installed, please double click the file "Setup.exe" in the folder of the keyboard and follow the setup instructions to complete the driver installation.3) A Keyboard Setting icon will appear on the tool bar of Windows after you successfully finish the installation.4)You can double click the Keyboard Setting icon and follow the selection instructions to set the keyboard functions.5) 20 Smart Hot Keys locate in three zones- -Multimedia, Internet and Computer.Multimedia Zone Provides you the total media control.(1) Media Player(2) Volume Up(3) Volume Down(4) Mute(5) Fast Forward (6) Fast Backward(7) Play/Pause(8) StopInternet ZoneFreely surfing Internet through the 8 easy hot keys.(1) E-mail(2) Web Home(3) My Favorites(4) Web Search(5) Web Refresh(6) Web Stop(7) Web Page ForwardComputer ZoneInternet Zone3Figure 3-2-5 Multimedia Zone 3Figure 2-1 Link ButtonReceiver3Figure 2-3LED Indicator3Figure 3-2-4Link Button12CHKeyboard3Figure 2-2Battery Case
Computer ZoneUse your computer in the smarter way.(1) PC Sleep(2) Calculator(3) My Computer(4) Wake Up4. Battery Notice1) The LED indicator of the keyboard will turn to red light while the keyboard is in the status of low battery and a low-battery icon will appear on the taskbar of Windows. Please change the batteries immediately.2) Press any button to wake up the keyboard while the keyboard is in the sleeping mode. Intelligent Wireless Keyboard User's GuidePMU-CKM00014Made in China

Navigation menu