Chicago Electric 93213 Users Manual

93213 93213

93213 to the manual 4f28a38b-2a3f-41c8-99a9-f5180bb3adad

2015-02-10

: Chicago-Electric Chicago-Electric-93213-Users-Manual-356982 chicago-electric-93213-users-manual-356982 chicago-electric pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

ELECTRIC CHAINSAW
SHARPENER
Model 93213

Set up and Operating Instructions

Visit our website at: http://www.harborfreight.com

Read this material before using this product.
Failure to do so can result in serious injury.
Save this manual.
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Manual revised 10c

NOTICE is used to
address practices not
related to personal injury.

Save This Manual
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.

Important SAFETY
Information
In this manual, on the labeling, and
all other information provided with
this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
DANGER indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.

CAUTION, without the
safety alert symbol, is
used to address practices not
related to personal injury.

Safety Warnings and
Precautions
WARNING! When using tool, basic safety
precautions should always be followed
to reduce the risk of personal injury and
damage to equipment.
Read all instructions before using this
tool!
1.

Keep guards in place and in working
order.

Keep work area clean. Cluttered areas
invite injuries.

Observe work area conditions. Do
not use machines or power tools in
damp or wet locations. Don’t expose to
rain. Keep work area well lighted. Do
not use electrically powered tools in the
presence of flammable gases or liquids.

Keep children away. Children must
never be allowed in the work area. Do
not let them handle machines, tools, or
extension cords.

Make workshop kid proof with
padlocks, master switches, or by
removing starter keys.

Store idle equipment. When not in use,
tools must be stored in a dry location to
inhibit rust. Always lock up tools and
keep out of reach of children.

Use the right tool for the job. Do
not attempt to force a small tool or

CAUTION, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 2

attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was
designed. It will do the job better and
more safely at the rate for which it was
intended. Do not modify this tool and do
not use this tool for a purpose for which it
was not intended.

for alignment and binding of moving
parts; any broken parts or mounting
fixtures; and any other condition that may
affect proper operation. Any part that is
damaged should be properly repaired
or replaced by a qualified technician. Do
not use the tool if any switch does not
turn On and Off properly.

Dress properly. Do not wear loose
clothing or jewelry as they can be caught
in moving parts. Protective, electrically
nonconductive clothes and nonskid
footwear are recommended when
working. Wear restrictive hair covering
to contain long hair.

15. Guard against electric shock. Prevent
body contact with grounded surfaces
such as pipes, radiators, ranges, and
refrigerator enclosures.

Wear proper eye protection. Always
wear ANSI-approved impact safety
goggles under a full face shield during
use and service.

10. Do not overreach. Keep proper footing
and balance at all times. Do not reach
over or across running machines.
11. Maintain tools with care. Keep tools
sharp and clean for better and safer
performance. Follow instructions for
lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have them repaired by an
authorized technician. The handles must
be kept clean, dry, and free from oil and
grease at all times.

16. Replacement parts and accessories.
When servicing, use only identical
replacement parts. Use of any other
parts will void the warranty. Only use
accessories intended for use with this
tool. Approved accessories are available
from Harbor Freight Tools.
17. Do not operate tool if under the
influence of alcohol or drugs. Read
warning labels on prescriptions to
determine if your judgment or reflexes
are impaired while taking drugs. If there
is any doubt, do not operate the tool.
18. Maintenance. For your safety,
maintenance should be performed
regularly by a qualified technician.
19. Secure tool to worktable.
20. Turn off before moving chain.

12. Avoid unintentional starting. Be sure
the switch is in the Off position when not
in use and before plugging in.

21. Never use the Electric Chainsaw
Sharpener around flammable
materials.

13. Stay alert. Watch what you are doing,
use common sense. Do not operate any
tool when you are tired.

22. This product contains lead, which
is a chemical known to the State of
California to cause cancer and birth
defects or other reproductive harm.
(California Health & Safety Code §
25249.5, et seq.)

14. Check for damaged parts. Before
using any tool, any part that appears
damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. Check
REV 07h; 09h

SKU 93213

23. Exposure to aluminum oxide (a dust
generated from material removing

For technical questions, please call 1-800-444-3353.

Page 3

processes) can result in eye, skin
and breathing irritation. Always
use a NIOSH (National Institute for
Occupational Safety and Health)
approved respirator and safety goggles.
Avoid skin exposure.
24. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity
to heart pacemaker could cause
pacemaker interference or pacemaker
failure.
25. WARNING: Handling the cord on this
product will expose you to lead, a
chemical known to the State of California
to cause cancer, and birth defects or
other reproductive harm. Wash hands
after handling.
(California Health & Safety Code §
25249.5, et seq.)
26. The warnings, cautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.

Grinding Wheel Warnings
1.

Do not use a grinding wheel if it is
chipped, cracked, or worn. You can
check if the wheel has cracks not visible
to the human eye by hanging it up by
the central hole and tapping it with
a nonmetallic object (ie: screwdriver
handle). If it is in good condition it will
produce a metallic sound. A dull sound
indicates a crack or break.

replacements are available at Harbor
Freight Tools.
3.

Do not overtighten the Grinder Lock Cap
(9). Hand tighten it only. Overtightening
may cause the wheel to break or
disintegrate.

Never use the Chainsaw Sharpener
without the Grinding Wheel Cover (11B)
in place.

Always test the Grinding Wheel (8) by
running it for a minute prior to contact
with a chain.

Keep away from the wheel when it
is turning, and make sure no one is
standing close, in the line of the wheel
rotation trajectory.

If the grinding wheel vibrates, turn off
the machine immediately and check that
it is mounted securely, and that is not
damaged.

Never try to stop the grinding wheel with
your hands, even if you are wearing
safety gloves. The wheel will cut through
gloves and your hand, causing serious
injury.

Never operate tool without the Grinding
Wheel Cover in place.

10. Replacement grinding wheel listed speed
must meet or exceed RPM rating of the
tool.
11. Use only flanges furnished with the tool.
12. This machine is designed to sharpen
chainsaw chains. Do not attempt to
sharpen any other tools, and do not
attempt to grind any other objects.

Only use grinding wheels that fit the
Arbor (7/8”). Do not try to change or
modify the mounting hole on a grinding
wheel to make it fit. Grinding wheel

REV 09b

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 4

Grounding
To prevent
electric shock
and death from incorrect
grounding wire
connection:
Check with a qualified electrician
if you are in doubt as to whether
the outlet is properly grounded.
Do not modify the power cord
plug provided with the tool.
Never remove the grounding
prong from the plug. Do not use
the tool if the power cord or plug
is damaged. If damaged, have it
repaired by a service facility
before use. If the plug will not fit
the outlet, have a proper outlet
installed by a qualified
electrician.

The grounding prong in the plug is
connected through the green wire inside
the cord to the grounding system in the
tool. The green wire in the cord must
be the only wire connected to the tool’s
grounding system and must never be
attached to an electrically “live” terminal.
(See 3-Prong Plug and Outlet.)

The tool must be plugged into an
appropriate outlet, properly installed and
grounded in accordance with all codes
and ordinances. The plug and outlet
should look like those in the preceding
illustration. (See 3-Prong Plug and
Outlet.)

Double Insulated Tools: Tools with
Two Prong Plugs

Grounded Tools: Tools with Three
Prong Plugs

Outlets for 2-Prong Plug
1.

Tools marked “Double Insulated” do
not require grounding. They have a
special double insulation system which
satisfies OSHA requirements and
complies with the applicable standards
of Underwriters Laboratories, Inc., the
Canadian Standard Association, and the
National Electrical Code. (See Outlets
for 2-Prong Plug.)

Double insulated tools may be used in
either of the 120 volt outlets shown in the
preceding illustration. (See Outlets for
2-Prong Plug.)

3-Prong Plug and Outlet
1.

Tools marked with “Grounding Required”
have a three wire cord and three prong
grounding plug. The plug must be
connected to a properly grounded outlet.
If the tool should electrically malfunction
or break down, grounding provides a
low resistance path to carry electricity
away from the user, reducing the risk of
electric shock. (See 3-Prong Plug and
Outlet.)

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 5

150’

The smaller the gauge number of the
wire, the greater the capacity of the cord.
For example, a 14 gauge cord can carry
a higher current than a 16 gauge cord.
(See Table A.)

100’

As the distance from the supply outlet
increases, you must use a heavier gauge
extension cord. Using extension cords
with inadequately sized wire causes a
serious drop in voltage, resulting in loss
of power and possible tool damage.
(See Table A.)

(at full load)

75’

Grounded tools require a three wire
extension cord. Double Insulated
tools can use either a two or three wire
extension cord.

50’

RECOMMENDED MINIMUM WIRE GAUGE
FOR EXTENSION CORDS* (120/240 VOLT)
EXTENSION CORD
NAMEPLATE
LENGTH
AMPERES
25’

Extension Cords

0 – 2.0

2.1 – 3.4

3.5 – 5.0

5.1 – 7.0

7.1 – 12.0

12.1 – 16.0

16.1 – 20.0

TABLE A

* Based on limiting the line
voltage drop to five volts at
150% of the rated amperes.

Symbology

When using more than one extension
cord to make up the total length, make
sure each cord contains at least the
minimum wire size required.
(See Table A.)
If you are using one extension cord for
more than one tool, add the nameplate
amperes and use the sum to determine
the required minimum cord size.
(See Table A.)

If you are using an extension cord
outdoors, make sure it is marked with the
suffix “W-A” (“W” in Canada) to indicate it
is acceptable for outdoor use.

Make sure the extension cord is properly
wired and in good electrical condition.
Always replace a damaged extension
cord or have it repaired by a qualified
electrician before using it.

Protect the extension cords from sharp
objects, excessive heat, and damp or
wet areas.

SKU 93213

Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.

V~
A

Volts Alternating Current
Amperes
No Load Revolutions per Minute

n0 xxxx/min. (RPM)

For technical questions, please call 1-800-444-3353.

Page 6

Specifications
Motor
RPM
Vise Capacity
Table / Vise Angles
Arbor Diameter
Wheel Dimensions
Working time

120 V~, 0.75 A (Load),
Direct Drive
4200
0.80” to 0.50”
35° Right to Left
7/8”
4-1/4” Dia. x 1/8” Thick
S3:10S ON / 15S OFF

Note: Performance of this tool (if powered
by line voltage) may vary depending on
variations in local line voltage. Extension
cord usage may also affect tool
performance.

Unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.

REV 09h

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 7

Assembly
Warning! Unplug the tool before changing
grinding wheels, or before making any
adjustments to the tool.

FIGURE 2

Installation
1.

Install the Sharpener to a workbench
before use.
FIGURE 1

Base (17)
2.

Lock Wheel (18)
1.

Bolt (bolts not included) the unit directly
to the workbench through the two 1/4”
holes on the Base (17). The workbench
must have a solid surface capable of
supporting the weight of this product,
the workpiece and assorted tools. See
FIGURE 2.

1/4” Hole
with Bolt

When installing the sharpener on a
workbench, make sure that the Lock
Wheel (18) is accessible, as shown in
the mounting picture in FIGURE 1.

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 8

to the human eye by hanging it up by
the central hole and tapping it with a non
metal object (ie: screwdriver handle). If
it is in good condition it will produce a
metallic sound. A dull sound indicates a
crack or break.

Mounting a Grinding Wheel
Refer to the Assembly Drawing on page 10.
FIGURE 3

Grinding Wheel
Cover (11B)

Top Housing (4B)
Lock Stop (6)

Raise the Top Housing (4B) and lock it
in the up position by tightening the Lock
Stop (6).

Remove the four screws holding the
Grinding Wheel Cover (11B). Set the
cover aside.

Replace the Grinder Lock Cap (9).

Replace the Grinding Wheel Cover
(11B).

Release the Lock Stop (6) and lower the
Top Housing (4B).

Never operate tool without the Grinding
Wheel Cover in place.

FIGURE 4
Grinding
Wheel (8)

Grinder Lock Cap (9)
3.

Unscrew the Grinder Lock Cap (9) that
holds the Grinding Wheel (8) in place.

Install the new wheel on the Grinding
Wheel Base (7), making sure it fits
properly.

Note: Do not use a grinding wheel if it is
chipped, cracked, or worn. You can
check if the wheel has cracks not visible
REV 10c

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 9

Operation

FIGURE 5

Tip of Chain Stop positioned against tooth.

Warning! Unplug the unit before adjusting
chain to be sharpened.
Refer to the Assembly Drawing on page 10 and
the various photographs.

Chain Stop (23)

Note: Raise the Top Housing (4B) while
adjusting the chain.
1.

Clean the chain before sharpening.
Wash it with a nonflammable solvent. Do
not use gasoline. Dry the chain.

Lock
Nut

FIGURE 6

Lower Knob (26)

Chain Stop (23)

Lock Wheel (18)
2.

SKU 93213

Lower the Chain Stop (23) so that it is
positioned on the tooth (cutter) you want
to start with. See FIGURE 5.

See FIGURES 5 & 6. Loosen the Lock
Wheel (18) to allow entire housing to
turn. Rotate the housing to match the
degree of angle you need on the Angle
Gauge. Chains come in various sizes
with varying degrees of sharpening
angles. Check with your chain
manufacturer’s manual to determine
what degree you need to sharpen at.
Once the degree is set, tighten the Lock
Wheel (18).

Lower the Top Housing (4B) so that
the Grinding Wheel (8) skims the chain
tooth.

Sliding Guides (31)

Lift up the Chain Stop (23) and secure
the chain in the Sliding Guides (31). See
FIGURE 6.

Angle Gauge

For technical questions, please call 1-800-444-3353.

Page 10

move to the next link, and tighten it to
sharpen each link.

FIGURE 7

FIGURE 9

Lock Stop (6)

Hold it at that position while you tighten
the Lock Stop (6) so that the wheel will
only go down to that point. See FIGURE
7.

Depending on the amount of material
you wish to remove, tighten or loosen the
Lower Knob (26) and set the Lock Nut.
See FIGURE 5. The Lower Knob (26)
has a Lock Nut which will determine how
much material is removed. Once you
set the Lock Nut, fully tighten the Lower
Knob (26).
FIGURE 8

Limiting
Gauge

If the chain has been repeatedly
sharpened, the chain depth limiting
gauges may need to be taken down with
a flat file (not included). See FIGURES
8 & 9. File down each gauge so that
they are at a lower level than the cutting
teeth.

Sharpening
1.

Put on your protective gear and make
sure the immediate area is clear of
bystanders.

Plug in the Power Cord (3) and push the
Switch (5B) to turn on the machine.

Handle
(34)
8.

Lock the chain in the Sliding Guides (31)
by turning the Handle (34). See FIGURE
8. The Handle (34) should be situated so
that you can easily release and tighten it.
You will need to release it each time you
SKU 93213

For technical questions, please call 1-800-444-3353.

Page 11

FIGURE 11

FIGURE 10

Lock
Slowly lower the grinding wheel as
Wheel
shown in FIGURE 10. If you notice slight
(18)
errors in your settings, turn off the unit
5. After you finished sharpening all of the
and unplug it before you make your
teeth set for your current angle, turn off
adjustments.
the machine by pushing the Switch (5B)
Note: A good grind occurs when the contact
and unplugging the unit. See FIGURE
between the wheel and the teeth are
11
gradual and smooth. Do not stop too
6. Loosen the Lock Wheel (18) and reset
long on any tooth.
the angle so that the first tooth that
4. After sharpening one tooth, turn off the
hasn’t been sharpened is positioned
machine. Lift the Top Housing (4B),
against the Chain Stop (23) and locked
release the Handle (34), and move the
in, as explained on page 6.
chain so that the next link is positioned
7. As you did with the first half of the chain,
in the Chain Stop (23). Tighten the
be sure to lower the Top Housing (4B)
Handle (34). Turn the machine back
so that the Grinding Wheel (8) skims
on and continue sharpening the next
the chain tooth, and lock it in place. See
tooth. Repeat this process until you have
page 6. Follow all of the steps on page
sharpened all of the links set up for this
6 double checking everything before you
angle.
plug in the machine and turn it on again.
3.

WARNING! Remember to turn off the
machine and unplug it if you need to
make any adjustments.
8.

SKU 93213

After you repeat all of the steps under
Sharpening on page 7, your chain is
ready to be mounted on your saw.

For technical questions, please call 1-800-444-3353.

Page 12

Maintenance
1.

Keep the Sharpener clean and free of
dust, metal debris and dirt.

Check the Grinding Wheel before each
use to make sure it isn’t damaged. Do
not use a grinding wheel if it is chipped,
cracked, or worn. You can check if
the wheel has cracks not visible to the
human eye by hanging it up by the
central hole and tapping it with a non
metal object (ie: screwdriver handle). If
it is in good condition it will produce a
metallic sound. A dull sound indicates a
crack or break.

Replace the Grinding Wheel when it
grinds down to a diameter of 3 inches.

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 13

Parts List
Part

Q’ty

Part

Screw

20*

Washer

Motor Cover

21*

Bearing

Power Cord

22*

Swing Arm

Top Housing

23*

Chain Stop

Rocker Switch

24*

Tension Spring

Lock Stop

25*

Retaining Ring (5)

Grinding Wheel Base

26*

Lower Knob

Grinding Wheel

27*

Screw

Grinder Lock Cap

28*

Bolt

Screw

29*

Chain Saw Frame

11B

Grinding Wheel Cover

30*

Square Neck Screw

O-ring

31*

Sliding Guide

Punching Axis

32*

Pad

Torsion Spring

33*

Screw

Switch Circuit Board

34*

Handle

Nut

35*

Spring

Base

36*

Lock Screw

Lock Wheel

Retaining Ring (10)

19*

Screw

Motor

15B

Description

Q’ty

*Note: The Chain Mounting Assembly (39) is only available as a set. It includes all part
numbers with asterisks (*). Part numbers with asterisks (19 through 36) are not available
individually.

PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO
THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 14

SKU 93213

Chain Mounting
Assembly Set

Assembly Drawing

For technical questions, please call 1-800-444-3353.

Page 15

LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and
durability standards, and warrants to the original purchaser that this product is free from defects
in materials and workmanship for the period of 90 days from the date of purchase. This warranty
does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper installation, normal wear
and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons
or property, or for incidental, contingent, special or consequential damages arising from the use
of our product. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation of exclusion may not apply to you. This warranty is
expressly in lieu of all other warranties, express or implied, including
the warranties of merchantability and fitness.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint must
accompany the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily and
quickly provide you with a replacement. We will return repaired products at our expense, but if
we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

SKU 93213

For technical questions, please call 1-800-444-3353.

Page 16

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Instance ID                     : uuid:84d332c6-7991-4d00-8d51-455df33d95c9
Document ID                     : adobe:docid:indd:85f8e2b8-9261-11de-b29d-f6dc2f3b7b75
Rendition Class                 : proof:pdf
Derived From Instance ID        : 85f8e2b7-9261-11de-b29d-f6dc2f3b7b75
Derived From Document ID        : adobe:docid:indd:646a7b6c-925d-11de-b29d-f6dc2f3b7b75
Manifest Link Form              : ReferenceStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream, DirectStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 500.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 500.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:7B72E4406D37DF11B720A3C4C7914F5B, uuid:7e31fb16-e1ac-11d6-a2ad-c5ad60a85d61, uuid:57412f01-e1b2-11d6-a2ad-c5ad60a85d61, uuid:c3f4782d-e1cc-11d6-87d9-b18f77cc77f9, uuid:d36d4756-e1c4-11d6-8894-9bd5ce03b3c9, uuid:c3f47832-e1cc-11d6-87d9-b18f77cc77f9, uuid:2df9e169-e1cf-11d6-87d9-b18f77cc77f9, uuid:cb9ea7af-e1d0-11d6-87d9-b18f77cc77f9, uuid:e3c81d1c-e1d4-11d6-87d9-b18f77cc77f9, uuid:cb9ea7b6-e1d0-11d6-87d9-b18f77cc77f9, uuid:e3c81d19-e1d4-11d6-87d9-b18f77cc77f9, uuid:e3c81d1c-e1d4-11d6-87d9-b18f77cc77f9, uuid:b756a71f-c88a-11d9-b12a-8444d3c60dbd
Manifest Reference Document ID  : uuid:7A72E4406D37DF11B720A3C4C7914F5B, adobe:docid:photoshop:7e31fb13-e1ac-11d6-a2ad-c5ad60a85d61, adobe:docid:photoshop:57412efe-e1b2-11d6-a2ad-c5ad60a85d61, adobe:docid:photoshop:c3f4782a-e1cc-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:d36d4752-e1c4-11d6-8894-9bd5ce03b3c9, adobe:docid:photoshop:c3f4782e-e1cc-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:c3f47833-e1cc-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:2df9e16f-e1cf-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:e3c81d1a-e1d4-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:cb9ea7b4-e1d0-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:e3c81d17-e1d4-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:e3c81d1a-e1d4-11d6-87d9-b18f77cc77f9, adobe:docid:photoshop:2af82160-e1e2-11d6-8d2e-8b87e5ada772
Create Date                     : 2010:03:24 10:52:29-07:00
Modify Date                     : 2010:03:24 10:52:35-07:00
Metadata Date                   : 2010:03:24 10:52:35-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools

Chicago Electric 93213 Users Manual

93213 93213

93213 to the manual 4f28a38b-2a3f-41c8-99a9-f5180bb3adad

Navigation menu

Versions of this User Manual:

Views

Navigation