Chicony Electronics Co DCD245R50 Wireless Digital Camera User Manual

Chicony Electronics Co Ltd Wireless Digital Camera

User Manual

WiFi Car DVRUser Manual
| 1EnglishNames of PartsLCD PanelStatus IndicatorTripodMountLensEmergency ButtonPower/Menu ButtonRecord ButtonMicro USB PortMicro HDMI PortSpeakermicroSD Card SlotMic GPS Receiver Slot
2 | EnglishShooting a Video1. Power on: Press to turn on camcorder.2. Record: Press to start recording. Press again to stop. 3. Playback: Press to enter menu settings. Press to select [Playback ]. Press [Play ] to play the video and press [ ] to stop. Inserting a microSD CardBefore initial use, insert a microSD card. (suggested at least 4GB, up to 64GB)Getting StartedmicroSD card Charging the UnitFully charge camcorder for initial use by:• Car charger • PC USB port• USB adapter (not included)During charging, screen shows battery icon or status indicator ashes in orange. When camcorder is fully charged, the indicator turns off. 4. Return to preview: Press [ ] to return.5. Power off: Press and hold for 2 seconds.
| 3EnglishCamcorder OperationIn preview, press to enter menu settings.Menu Settings Descriptions Play recorded videos Switch between Action Cam and Dash Cam Enable/Disable WiFi for wireless connection Enable/Disable internet cloud connection Enable/Disable voice recording (Dash cam mode only)Auto REC Enable/Disable auto recording when car engine starts (Dash cam mode only) 60 SECOFF Screen turns off after 60 seconds of non- operation (Dash cam mode only) Reset to factory default settings or format SD card.Screen Auto OffSettingsVoice RecordWiFi - Local Auto Record Dash CamPlayback Action Cam WiFi - CloudMenu SettingsCamcorder has eight menu settings. Advanced settings can be set up via mobile APP. Button functions indicated by . Use to navigate menu settings and to back to preview .Note: After 10 seconds of non-operation in menu settings, screen returns to preview.
4 | EnglishTransfer Files to PC:1. Connect camcorder to PC via Micro USB cable. 2. Find video at "My computer\Removable Disk\". 3. Copy, move, delete, and playback videos on PC. View Camcorder Screen on TV:1. Connect camcorder to TV via Micro HDMI cable (not included). 2. Turn on camcorder. 3. Camcorder screen displays on TV simultaneously.Camcorder has two recording modes for different applications:Action Cam: Shoot normal videos.Dash Cam: Shoot loop and emergency videos. Record ModesMode Action Cam Dash CamRecord type Normal Loop EmergencyRecord triggerRecord duration Display info.• Car impact• Press during loop recordingPress in previewThree min. sectionsUnlimitedOne min. section(30 seconds before and after the event)SD card remaining time Current date & time2014/01/01 21:06:36Comparison between modes:00:06:36Note: 1. During loop recording, oldest les are overwritten if microSD card is full.2. During loop recording, press to enable/disable mute fuction.
| 5EnglishMobile CamcorderLocalLocal InternetMobile connects to camcorder directly via WiFi for remote control, live view, album management and camcorder setup.Mobile connects to cloud server to view live videos uploaded from internet remote camcorder.Wireless & APP OperationBefore inital using wirless connections, download and install APP [Unieye Drive] from Google Play Store and Apple Store. [Unieye Drive] has two functions: (1) Local - Direct control (2) Internet - Internet live viewUnieye Drive【Local】(1)LocalInternet【Internet】(2) LocalInternetAPUnieye ServerAP3G/4G Mobile Hotspot3G/4G Mobile Wireless RouterWireless RouterCamcorderAPMobileInternet
6 | EnglishMobile Connects to Camcorder1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camcorder name.2. Run [Unieye Drive].3. Tap【Local】and select the camcorder to enter【Local】View Page. Tap [ ] to scan again if camcorder is not found.Note: • Mobile cannot connect to camcorder while camcorder is recording.• For rst use, password is not required. User can set camcorder password in Setup Page.【Local】FunctioniOS SettingsLocalInternetBefore using mobile APP's【Local】function, ensure camcorder WiFi is on and camcorder Cloud setting is off. Once WiFi is ready, preview shows camcorder name (R2-xxxxxxxx) for few seconds.Local View PageLocal Main Page
| 7EnglishItems Descriptions Shoot videos and les are saved into camcorder microSD card Shoot videos or Take photos and les are saved into mobile "Album\Unieye Drive\" For multiple camcorders user : • Enable Quad-View for multiple live view on mobile • In Quad-View, select a window for single view. Upside down image Talk to camcorder from mobile View Page Album Page (for camcorder) Setup Page (for camcorder)4.【Local】function has three function pages: View, Album and Setup.Folders Descriptions View or delete video les recorded in action cam mode View or delete video les recorded in dash cam modeGroups Descriptions Camcorder Settings Edit name, password, format SD card, resolution etc. Internet Settings Edit Email and AP and save in camcorder. (For internet cloud server connection) Car DVR Settings Set motion detector, impact sensor, etc. Note: 1. In Setup Page, tap [Save] to complete settings to camcorder. 2. Mobile media player may not support SuperHD video.
8 | English1. Go to [Setup] [ Internet Settings] Edit Email and AP2. Tap [Save] to complete Email & AP settings.Camcorder Internet Setup Before using internet cloud service, Email and AP must be properly set up. Camcorder SD Card SetupGo to [Setup] [ Camcorder Settings] Adjust slide bar and press [Format] button to complete SD card setup.When SD card is rst-time use or reformatted in camcorder, user should allocate memory for Portable Mode and Car Mode.Note: AP(Access Point) can be • Wireless Router or • 3G/4G Mobile Wireless Router or • 3G/4G Mobile HotspotAPAPAPWireless RouterAPAPAP3G/4G Mobile Wireless RouterAPAPAP3G/4G Mobile Hotspot
| 9EnglishMotion Detector SetupG-Sensor SetupWhen car's engine stops and motion is detected, camcorder automatically records videos till no motion is detected.When camcorder is recording and any impacts happen, camcorder automatically records emergency events if G-Sensor is set. 1. Set Camcorder to dash cam mode.2. Go to APP [Setup] [ Car DVR Settings] Turn on [Motion Detector] Tap [Save].Go to APP [Setup] [ Car DVR Settings] Select [G-Sensor], [H]/[L] Tap [Save]. Note : [H] High sensitivity. [L] Low sensitivity.3. Camcorder shows on screen. 4. When car's engine stops, operate camcorder to active [ Motion Detector].
10 | EnglishCamcorder Connects to Cloud ServerEnable [Cloud ] in camcorder to upload video streaming to cloud server. Connecting status will be shown on screen.【Internet】FunctionLocalInternetStatus Descriptions Connection successful. Preview shows [ ] and camcorder ID. Login fail: • Invalid AP name or password • Weak WiFi signal or not in WiFi coverage Connection fail: • No internet or cloud server is not accessible • Blocked by some rewallBefore using APP's【Internet】function, ensure camcorder internet setup has been completed.1. Connect mobile to internet (via WiFi, 3G/4G). 2. Run [Unieye Drive] and tap【Internet】.3. For adding camcorder or using another mobile, tap [ ] Enter the camcorder ID and password.4. Tap camcorder ID/name to view internet live videos. 【Internet】 Main PageRemote Internet Live View
| 11EnglishSituation Cause/SolutionCamcorder cannot turn on Power is low. Recharge batteryCamcorder isfrozenPress and hold button for 5 seconds to force shutdown; press again to turn on Camcorder cannot record• No microSD card or microSD card is full • microSD card cannot be recognized • Format microSD card or replace microSD cardCamcorder cannot connect to AP or could server • Invalid AP name or password • Weak WiFi signal or not in WiFi coverage • No internet or cloud server is not accessible • Blocked by some rewallMobile cannot nd camcorder • Camcorder WiFi is disabled or not in WiFi coverage • Mobile WiFi is disabled • iOS user does not choose camcorder name in Wi-Fi Settings • Tap [Refresh] button on [Unieye Drive]Mobile cannot watch live view• Weak WiFi signal• Camcorder is recording• Camcorder is occupied by other mobileMobile cannot connect to cloud server Check mobile 3G/4G or WiFi internet connectionMobile cannot watch live view The internet bandwidth is insufcient for camcorder upload or mobile downloadForget camcorderpasswordEnter camcorder menu settings and select [Settings] [Factory Reset] to resetTroubleshooting【Internet】【Internet】【Local】【Local】
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Compliance (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit adopted by the FCC is 1.6W/kg for an uncontrolled environment. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Navigation menu