Chicony Electronics Co DCD245R50 Wireless Digital Camera User Manual
Chicony Electronics Co Ltd Wireless Digital Camera
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2353389 |
| Application ID | lv3PJyLsm/uRSlchMI8x/A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 310.13kB (3876591 bits) |
| Date Submitted | 2014-08-11 00:00:00 |
| Date Available | 2015-02-07 00:00:00 |
| Creation Date | 2017-10-21 15:51:44 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-21 15:51:44 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Windows) |
WiFi Car DVR User Manual Names of Parts GPS Receiver Slot Lens Micro HDMI Port Speaker Tripod Mount Mic Status Indicator Micro USB Port LCD Panel microSD Card Slot Power/Menu Button Record Button Emergency Button English | 1 Getting Started Inserting a microSD Card Before initial use, insert a microSD card. (suggested at least 4GB, up to 64GB) Charging the Unit microSD card Fully charge camcorder for initial use by: • Car charger • PC USB port • USB adapter (not included) During charging, screen shows battery icon or status indicator lashes in orange. When camcorder is fully charged, the indicator turns off. Shooting a Video 1. Power on: Press to turn on camcorder. 2. Record: Press to start recording. Press again to stop. 3. Playback: Press to enter menu settings. ]. Press to select [Playback Press [Play ] to play the video and press [ 4. Return to preview: Press [ ] to return. 5. Power off: Press and hold for 2 seconds. 2 | English ] to stop. Camcorder Operation In preview, press to enter menu settings. Button functions indicated by . Use to navigate menu settings and to back to preview . Menu Settings Camcorder has eight menu settings. Advanced settings can be set up via mobile APP. Menu Settings Playback Descriptions Play recorded videos Action Cam Switch between Action Cam and Dash Cam Dash Cam Auto REC 60 SEC OFF WiFi - Local Enable/Disable WiFi for wireless connection WiFi - Cloud Enable/Disable internet cloud connection Voice Record Enable/Disable voice recording (Dash cam mode only) Auto Record Enable/Disable auto recording when car engine starts (Dash cam mode only) Screen Auto Off Screen turns off after 60 seconds of nonoperation (Dash cam mode only) Settings Reset to factory default settings or format SD card. Note: After 10 seconds of non-operation in menu settings, screen returns to preview. English | 3 Record Modes Camcorder has two recording modes for different applications: Action Cam: Shoot normal videos. Dash Cam: Shoot loop and emergency videos. Comparison between modes: Mode Record type Record trigger Record duration Display info. Action Cam Dash Cam Normal Press Loop in preview Unlimited Three min. sections 00:06:36 SD card remaining time Emergency • Car impact during • Press loop recording One min. section (30 seconds before and after the event) 2014/01/01 21:06:36 Current date & time Note: 1. During loop recording, oldest iles are overwritten if microSD card is full. 2. During loop recording, press to enable/disable mute fuction. Transfer Files to PC: 1. Connect camcorder to PC via Micro USB cable. 2. Find video at "My computer\Removable Disk\". 3. Copy, move, delete, and playback videos on PC. View Camcorder Screen on TV: 1. Connect camcorder to TV via Micro HDMI cable (not included). 2. Turn on camcorder. 3. Camcorder screen displays on TV simultaneously. 4 | English Wireless & APP Operation Before inital using wirless connections, download and install APP [Unieye Drive] from Google Play Store and Apple Store. [Unieye Drive] has two functions: (1) Local - Direct control (2) Internet - Internet live view Local Unieye Drive (1) Local Internet 【Local】 Mobile connects to camcorder directly via WiFi for remote control, live view, album management and camcorder setup. Local Mobile (2) Internet Camcorder 【Internet】 Mobile connects to cloud server to view live videos uploaded from internet remote camcorder. AP Wireless Router AP Internet Mobile Unieye Server 3G/4G Mobile Wireless Router Camcorder AP 3G/4G Mobile Hotspot English | 5 Local 【Local】Function Before using mobile APP's【Local】function, ensure camcorder WiFi is on and camcorder Cloud setting is off. Once WiFi is ready, preview shows camcorder name (R2-xxxxxxxx) for few seconds. Mobile Connects to Camcorder 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camcorder name. 2. Run [Unieye Drive]. 3. Tap【Local】and select the camcorder to enter【Local】View Page. Tap [ ] to scan again if camcorder is not found. Note: • Mobile cannot connect to camcorder while camcorder is recording. • For irst use, password is not required. User can set camcorder password in Setup Page. iOS Settings 6 | English Local Main Page Local View Page 4.【Local】function has three function pages: View, Album and Setup. View Page Items Descriptions Shoot videos and iles are saved into camcorder microSD card Shoot videos or Take photos and iles are saved into mobile "Album\Unieye Drive\" For multiple camcorders user : • Enable Quad-View for multiple live view on mobile • In Quad-View, select a window for single view. Upside down image Talk to camcorder from mobile Album Page (for camcorder) Folders Descriptions View or delete video iles recorded in action cam mode View or delete video iles recorded in dash cam mode Setup Page (for camcorder) Groups Descriptions Edit name, password, format SD card, resolution Camcorder Settings etc. Internet Settings Edit Email and AP and save in camcorder. (For internet cloud server connection) Car DVR Settings Set motion detector, impact sensor, etc. Note: 1. In Setup Page, tap [Save] to complete settings to camcorder. 2. Mobile media player may not support SuperHD video. English | 7 Camcorder SD Card Setup When SD card is irst-time use or reformatted in camcorder, user should allocate memory for Portable Mode and Car Mode. Go to [Setup] [ Camcorder Settings] Adjust slide bar and press [Format] button to complete SD card setup. Camcorder Internet Setup Before using internet cloud service, Email and AP must be properly set up. 1. Go to [Setup] [ Internet Settings] Edit Email and AP 2. Tap [Save] to complete Email & AP settings. Note: AP(Access Point) can be • Wireless Router or • 3G/4G Mobile Wireless Router or • 3G/4G Mobile Hotspot AP AP AP Wireless Router 8 | English 3G/4G Mobile Wireless Router 3G/4G Mobile Hotspot Motion Detector Setup When car's engine stops and motion is detected, camcorder automatically records videos till no motion is detected. 1. Set Camcorder to dash cam mode. 2. Go to APP [Setup] [ Car DVR Settings] Turn on [Motion Detector] Tap [Save]. 3. Camcorder shows on screen. 4. When car's engine stops, operate camcorder to active [ Motion Detector]. G-Sensor Setup When camcorder is recording and any impacts happen, camcorder automatically records emergency events if G-Sensor is set. Go to APP [Setup] [ Car DVR Settings] Select [G-Sensor], [H]/[L] Tap [Save]. Note : [H] High sensitivity. [L] Low sensitivity. English | 9 Internet 【Internet】Function Before using APP's【Internet】function, ensure camcorder internet setup has been completed. Camcorder Connects to Cloud Server Enable [Cloud ] in camcorder to upload video streaming to cloud server. Connecting status will be shown on screen. Status Descriptions Connection successful. Preview shows [ camcorder ID. ] and Login fail: • Invalid AP name or password • Weak WiFi signal or not in WiFi coverage Connection fail: • No internet or cloud server is not accessible • Blocked by some irewall Remote Internet Live View 1. Connect mobile to internet (via WiFi, 3G/4G). 2. Run [Unieye Drive] and tap【Internet】. 3. For adding camcorder or using another mobile, tap [ Enter the camcorder ID and password. 4. Tap camcorder ID/name to view internet live videos. 【Internet】 Main Page 10 | English Troubleshooting Situation Camcorder cannot turn on Cause/Solution Power is low. Recharge battery Camcorder is frozen Press and hold button for 5 seconds to force shutdown; press again to turn on Camcorder cannot record • No microSD card or microSD card is full • microSD card cannot be recognized • Format microSD card or replace microSD card • Invalid AP name or password • Weak WiFi signal or not in WiFi coverage • No internet or cloud server is not accessible • Blocked by some irewall • Camcorder WiFi is disabled or not in WiFi coverage Mobile cannot ind • Mobile WiFi is disabled camcorder • iOS user does not choose camcorder name in 【Local】 Wi-Fi Settings • Tap [Refresh] button on [Unieye Drive] Mobile cannot watch • Weak WiFi signal live view • Camcorder is recording • Camcorder is occupied by other mobile 【Local】 Mobile cannot connect Check mobile 3G/4G or WiFi internet to cloud server connection 【Internet】 Camcorder cannot connect to AP or could server Mobile cannot watch The internet bandwidth is insuficient for live view camcorder upload or mobile download 【Internet】 Forget camcorder password Enter camcorder menu settings and select [Settings] [Factory Reset] to reset English | 11 FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Compliance (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit adopted by the FCC is 1.6W/kg for an uncontrolled environment. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2014:03:14 18:00:37+08:00 Metadata Date : 2014:08:08 11:48:14+08:00 Modify Date : 2014:08:08 11:48:14+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:84f1da70-faac-4762-82c4-0d5f2cc248b4 Original Document ID : xmp.did:98DB63C739D6E111991BFFB22927D84E Document ID : xmp.id:CC505B735FABE311A725EAA63F2D187E Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:CB505B735FABE311A725EAA63F2D187E Derived From Document ID : xmp.did:C2F4031F5FABE311A725EAA63F2D187E Derived From Original Document ID: xmp.did:98DB63C739D6E111991BFFB22927D84E Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:03:14 18:00:38+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 13 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools