Chicony Electronics Co DCD320B30 Wireless Digital Camera User Manual

Chicony Electronics Co Ltd Wireless Digital Camera

User Manual

Smart WiFi Baby MonitorUser Manual
| 1EnglishNames of PartsStatus IndicatormicroSD Card SlotLensNight LightButtonTemperature SensorMicro USB PortNight LightMicro USB PortSpeakerWPS ButtonPower/Mode ButtonMicrophone
2 | English1. Insert a microSD Card (suggested class 10, up to 64GB)For initial use, mobile needs to:1. Connects to internet (via WiFi, 3G/4G). 2. Download and install App [Unieye Care] from Google Play Store or Apple App Store. Getting Started2. Power on: Plug a USB power cable into one of • PC USB port • USB output adapterUnieye Care3. Power off: Press for 2 seconds to turn off camera.Mobile connects to smart WiFi baby monitor directly via App [Unieye Care] for remote control, live view, lullaby playback, Night Light control and receives push alerts when events are detected.Modes Switch in CameraCamera status indicator shows current funciton. Press to switch. • Steady orange for direct control • Steady green for Internet controlPower/Mode Camera needs to: Status Indicator
| 3EnglishWireless & App OperationRun App [Unieye Care] on mobile and navigate either one of functions:(I) Local - Direct control (II) Internet - Internet controlUnieye Care【Local】(I)LocalInternet【Internet】(II) LocalInternetMobile CameraLocalStatus: OrangeUnieye ServerAP3G/4G Mobile HotspotWireless RouterAP WPSCamera 3G/4G Mobile Wireless RouterAPMobileInternetStatus: GreenMobile directly connects to camera via WiFi for remote control, live view, lullaby playback, night light control, camera setup, and receives push notication when noise and motion events are detected.Mobile connects to camera via internet to accomplish the same features as in [Local] function, and links to partner's camera to enjoy the instant live sharing.
4 | EnglishMobile Connects to Camera1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camera name.2. Run [Unieye Care].3. Tap【Local】and select the camera to enter View Page. Tap [ ] to scan again if camera is not found.Note: For rst use, password is not required. User can set camera password in Setup Page.【Local】FunctioniOS SettingsLocalInternetBefore using mobile App's【Local】function, ensure mobile WiFi been on and camera status indicator shows steady orange.Local View PageLocal Main Page
| 5EnglishItems Descriptions Adjust brightness level of night light. Play lullaby. Mute the sound from camera. Shoot videos or take photos and saved les into mobile "Album\Unieye Care\". Talk to camera from mobile.Groups Descriptions Camera Settings Edit name, password. Format SD card. Adjust night vision, noise detection, motion detection, etc. Internet Settings Edit Email and AP for【Internet】function. View Page Events Page (for camera)4.【Local】function has three function pages: View, Album and Setup. In [Setup] Page, tap [Save] to complete settings to camera.Items DescriptionsCamera Videos View or delete video les recorded and saved in camera during motion and noise detection. Setup Page (for camera)
6 | English1. Go to [Setup] [ Internet Settings] Edit Email and AP2. Tap [Save] to complete Email & AP settings.Camera Internet Setup Note: AP(Access Point) can be • Wireless Router or • 3G/4G Mobile Wireless Router or • 3G/4G Mobile HotspotAPAPAPWireless RouterAPAPAP3G/4G Mobile Wireless RouterAPAPAP3G/4G Mobile Hotspot(I) AP without WPS (II) WPS Wireless RouterBefore using internet, Internet Settings must be properly setup. Camera has two different procedures to complete Internet Settings: (I) AP without WPS(II) WPS wireless router1. Setup Mobile App Go to [Setup] [ Internet Settings] Edit Email Tap [Save] to complete Email settings.2. Setup Router Press WPS button of WPS wireless router.3. Setup Camera Press WPSStatus indicator shows steady green when connects【Internet】function successfully. WPSButton
| 7EnglishRemote Control Functions【Internet】function has two function pages: View and Setup.【Internet】FunctionLocalInternetA camera can setup【Internet】Function by 2 methods: (I) Setup Wizard (II) Others1. Run [Unieye Care] and tap【Internet】.2. Tap Others in list. Enter camera ID and password. (I) Setup Wizard1. Run [Unieye Care] and tap【Internet】. 2. Tap and follow the instructions to view internet live videos. (II) OthersBefore adding a congured camera or using another mobile, ensure the camera is in 【Internet】function and status indicator shows steady green. Intenet Main Page View Page: Same as the 6 features in【Local】function.Groups Descriptions Camera Settings Adjust night vision, noise detection, motion detection, rmware upgrade, etc. In [Setup] Page, tap [Save] to complete settings to camera. Setup Page (for camera)Push NoticationWhen camera is in【Internet】function and events are detected, Push Notication and Email will be sent to mobile and events clips to be saved to SD card.
8 | EnglishMicro USB PortTransfer Files to PC1. Use Micro USB cable to connect camera to PC. 2. Find videos at "My computer\Removable Disk\". 3. Copy, move, delete, or playback videos on PC. Condition Status Indicator Beep Power On Flash in orange for few seconds, then turn to steady orange 1 time Mass Storage Mode Steady red N/A【Local】function Steady orange N/A【Internet】function Steady green N/A Power Off No indication 1 time Low Battery No change 2 times Fail connect to 【Internet】Flash in green for few seconds, then turn to orange N/A Factory Reset No change 3 timesCamera HotkeyForced Shutdown Press and hold for 5 seconds to turn off camera.Forced Factory Settings• Camera: Power on camera Press and hold Night Light button and pressWPS Alert beep tones to complete the default settings. • Mobile: Go to App [Unieye Care] Connect【Local】function [Setup] page Reset factory settings.Camera IndicationCamera Hotkey
| 9EnglishSituation Cause/SolutionCamera cannot turn on Power is low. Recharge batteryCamera is frozen Press and hold for 5 seconds to force turn off; press again to power on Camera cannot record• No microSD card or microSD card is full • microSD card cannot be recognized • Format microSD card in [Unieye Care] or replace microSD cardCamera cannot connect to AP or could server • Invalid AP name or password • Weak WiFi signal or not in WiFi coverage • No internet or cloud server is not accessible • Blocked by some rewallMobile cannot nd Camera • Camera not in WiFi coverage • Mobile WiFi is disabled • iOS user does not choose camera name in Wi-Fi Settings • Tap [ ] on [Unieye Care]Mobile cannot watch live view • Weak WiFi signal• Camera is occupied by other mobileMobile cannot connect to cloud server • Check mobile 3G/4G or WiFi internet connection • Blocked by some rewallMobile cannot watch live view The internet bandwidth is insufcient for camera upload or mobile downloadForget Camera passwordPress and hold Night Light button and press WPSto resetTroubleshooting【Internet】【Internet】【Local】【Local】
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Compliance (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit adopted by the FCC is 1.6W/kg for an uncontrolled environment. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible

Navigation menu