Chicony Electronics Co KR-0309 Wireless Keyboard User Manual Contents

Chicony Electronics Co Ltd Wireless Keyboard Contents

User Manual

A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTThis equipment has been tested and found to comply with the limits for a Class Bdigital device, Pursuant to Part 15 the FCC rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference thatmay cause undesired operation.WARNING:Use only shielded cables to connect I/O devices to this equipment.You are cautioned that changes or modifications not expressly approved by theparty responsible for compliance could void your authority to operate theequipment.CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUTBREAKS.Take regular breaks and keep a good posture. Consult your physician promptly ifyou notice any lost of motion or pain in your wrist when using the keyboard.INFORMATION FOR OPTICAL POINTING DEVICES ONLY :User-observable light is 15 micro-watts in normal operation.This product has been tested to comply with international Standard IEC 60825-1:(1993), incid. Amd.2(2001). This product uses LEDs that are inherently Class 1.Class 1 LED Product
ContentsGetting StartedFeaturesPreparing Keyboard, mouse and receiverHardware Installation-- Connect the receiver+--- USB Interface-- Inserting batteries+--- Inserting batteries into mouse+--- Inserting batteries into keyboard-- Setting frequency channel or ID+--- Setting frequency channel on keyboard and mouse+--- Setting ID on keyboard and mouseSoftware Installation-- Installing software for mouse-- Installing software for keyboardDisplaying keyboard ModesWorking with keyboard and mouse-- Using mouse wheel-- Keyboard battery indicator-- Writing using the keyboard-- Cleaning the keyboard and the mouseProduct SpecificationTroubleshooting and tips
Getting StartedThank you for choosing this Wireless keyboard and Mouse Kits. It operates withdigital radio technology to ensure no hinder communication between the keyboard,the mouse and your computer without connecting cable.The transmission and receiving of keyboard and mouse are free from anglerestriction. There are two frequency channels each for keyboard and mouse toprevent malfunctions when you operate several radio transmission devicessimultaneously.Features. Complies with Directive 1995/5/EC of the European Parliament andCommission.. Complies with the mutual recognition of conformity 1999 for radio andtelecommunications Equipment.. Manufactured with environmental friendly recycled materials.. Fully compliant with original USB version 1.0 and 1.1.Preparing Keyboard, mouse and receiverBefore working with your new keyboard and mouse, look at the “HardwareInstallation” , and take a few one-time preparations.Hardware InstallationPlace the receiver at least 20 cm from other electrical devices (e.g. monitor) toachieve optimum performance.The distance between the keyboard, mouse and receiver should not exceed 5feet. Do not place the receiver on metal surfaces.Step 1: Connect the receiver1. Plug the receiver connector into an USB port.2. SYSTEM will take around 10 sec to find your keyboard and mouseautomatically. (PS : If your OS is Windows® 98, please follow the screeninstruction to complete your keyboard and mouse installation)3. Please keep your receiver from the other electrical devices about 8 inches. Theother electrical devices may influence your receiver sensitivity.4. Put two batteries into your keyboard battery chamber, and another twobatteries into your mouse battery chamber.Setp 2: Insert batteries. Inserting batteries in mouseThe mouse requires two alkaline batteries (AA or AAA).(1) Please remove the battery compartment cover on the bottom of the mouse.(2) Insert the two alkaline batteries (AA or AAA) in the battery compartment.(3) Fix the battery compartment cover (1) on the bottom of mouse againDangerous!! Please only use batteries of the same type.
. Inserting batteries in keyboardThe keyboard requires two alkaline batteries (AA).(1) Remove the battery compartment cover (1) on the bottom of the keyboard bypushing it in the direction of arrow.(2) Insert two AA batteries.The illustration in the battery compartment (2) shows how to insert the batteriesproperly.(3) Recover the battery compartment by pushing the locking lug (2) under thebattery compartment.Note: Please do not push the channel setting button (3) at one side of the batterycompartment cover. It may cause the channel or ID change. It is the same tomouse and keyboard.Setp 3: Setting frequency channel or IDFor the radio connection, set the keyboard to receiver, and mouse to receiver,with the same frequency channel and ID. Different ID can keep the keyboard andmouse working well in the same frequency or channel. There are 255 IDs for bothkeyboard and mouse. Change the frequency or channel may prevent interferencebetween two devices.. Setting frequency or channel on keyboard and mouse(1) Push the connection button on the top of receiver. The indicator will beblinking.(2) Push the button on the bottom of keyboard or mouse. The channel will bechanged after the button released.Note: Please do not hold the button until 3 seconds. It will change the ID, insteadof channel.. Setting ID on keyboard and mouse(1) Push the connection button on the top of receiver. The indicator on the top ofreceiver will be blinking.(2) Hold down the button on the bottom of keyboard and mouse until 3 seconds.The ID will be changed after the button released.Software Installation. Installing software for mouseThe software for the mouse provided, only supports Windows 98, Windows ME,Windows 2000 and Windows XP. Install the software to use all mouse functions.(1) Start the computer and insert the data carrier in the corresponding drive.(2) Start the" Setup "program from the data carrier and follow the instructions onthe screen.
You may also use any standard mouse software. However, it is possible that(depending on the software used) not all mouse functions are available.. Installing software for keyboard(1) Start the computer and insert the CD ROM.(2) Start the "Setup "program from the CD ROM and follow the instruction on thescreen.Once you have installed the software, the following symbols will display onWindows taskbar, the multimedia keys can be activated.Displaying keyboard ModesThe symbols indicate which keyboard mode is active. They match the displays onordinary keyboards.The symbol is green when the respective mode is activated and light grey when itis deactivated.Uppercase mode (Caps Lock)Virtual numeric keypad (Num Lock)Stop screen output (Scroll Lock)Keyboard battery low indicatorMouse battery low indicatorWorking with keyboard and mouseThe following sections contain information on using the keyboard and the mouse.Using mouse wheelIn addition to two buttons, the mouse also has a wheel that can be used asfollows:• As a 3rd button: press on the wheel.• For scrolling, e.g. in documents or on Internet pages: turn the wheel forward orback.You can specify further settings in the mouse software.Keyboard battery indicatorThe battery indicator on the screen shows you the charging state of the batteries.If the battery indicator lights up when a key is pressed, the batteries are graduallybecoming weaker. Replace them in the near future.Writing using the keyboardThe keyboard is ergonomically designed to ensure ease-of-use.Inconvenient arrangement of the input and output devices, awkward armmovements or posture, or working with the keyboard or mouse for lengthy periodswithout a break can lead to tenseness, fatigue, and damage to the locomotorssystem (nerves, muscles, tendons, and joints).
You can considerably reduce the risk of this happening if you follow the advicegiven below.• Arrange your workplace in accordance with the recommendations for anergonomic workstation provided in the PC Operating Manual.• Position the keyboard so that you can use it without any noticeable strain. Thekeyboard should be level with the upper part of you body. This prevents anytension in the shoulders and arms.• The distance between the keyboard and the edge of the desk should be 5 to 10cm.• When typing, hold your hands and forearms so that they form as natural a line aspossible. Do not turn your hands too far to the left or right.• Keep your wrists straight while typing. Do not angle your hands upwards ordownwards.• Do not rest your hands on the balls of your thumbs while typing, and do notstrike the keys too hard.• Relax your hands by occasionally taking a break from typing. During thesebreaks you should rest your hands on the balls of your thumbs or place yourarms on the armrests of your chair.Cleaning the keyboard and the mouse• Use disinfectant wipes to clean the keyboard and the mouse.• Do not use any dissolvent, which may damage the surface of your keyboard andmouse.
Product SpecificationReceiver Interface: USB interface.Frequency band: Two channels for keyboard and two channels for mouse. Keyboard – 27.145 MHz and 27.195 MHz Mouse – 26.995 MHz and 27.045 MHzFrequency modulation : FSK modeRadio power: < 1 mWPower rating: Keyboard: 3 V, 30 mA (MAX)_ Mouse: 3 V, 50 mA (MAX)_ Receiver: 5 V, 100mA (MAX) for USBBattery: Keyboard: 2 pieces of AA Batteries Mouse: 2 pieces of AA Batteries (for Optical mouse)2 pieces of AAA Batteries (for Ball mouse)Battery life time: Keyboard: 500 hours reference (operating mode) Mouse: 50 hours reference (operating mode)Operation distance: Keyboard: 6 feet without signal disturbance and no direction limit. Mouse: 5 feet without signal disturbance and no direction limit.Mouse detection method: Mouse: Mechanical tracking method (Roll ball optical sensor)Mouse resolution: 400 DPIOperating temperature: 0º C~ 40º C.Storage temperature: -10º C ~ 60º C.
Troubleshooting and tipsThe keyboard or mouse does not operate following installation or is notrecognized.. Make sure that the batteries have been inserted correctly according to thepolarity and the receiver is well connected.. Check that your USB port is configured properly.. Check whether the respective channels and ID are set on the receiver and thekeyboard or mouse.. Make the connection between the receiver and the keyboard and mouse. Pressa mouse button and then the connection button on the receiver.. Make sure the batteries are not too weak.. Remove the batteries from the device. Please press any button on the deviceseveral times to prevent any unexpected failure after batteries being put in.. Change the location of the receiver to have a best sensitivity.. To determine whether the keyboard, mouse or computer causes the problemtest the keyboard and mouse on a second computer if possible; or test anotherkeyboard and mouse on your current computer.If you are still unable to solve the problem, please contact your point of sale oryour dealer.If you need to exchange the keyboard, please note that you must return it to yourdealer in its original packaging and also a produce proof of purchase (receipt).Keep your receipt in a safe place after purchase.

Navigation menu