Chicony Electronics Co KR-0309 Wireless Keyboard User Manual Contents

Download:
Mirror Download [FCC.gov]
Document ID	363271
Application ID	qb6W0rYlOebkRUxHIOhcPA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.97kB (24656 bits)
Date Submitted	2003-10-08 00:00:00
Date Available	2003-10-06 00:00:00
Creation Date	2003-10-02 17:52:09
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-10-03 15:12:06
Document Title	Contents
Document Creator	Acrobat PDFMaker 5.0 for Word
Document Author:	UserFree

A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, Pursuant to Part 15 the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
WARNING:
Use only shielded cables to connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT
BREAKS.
Take regular breaks and keep a good posture. Consult your physician promptly if
you notice any lost of motion or pain in your wrist when using the keyboard.
INFORMATION FOR OPTICAL POINTING DEVICES ONLY :
User-observable light is 15 micro-watts in normal operation.
This product has been tested to comply with international Standard IEC 608251:(1993), incid. Amd.2(2001). This product uses LEDs that are inherently Class 1.
Class 1 LED Product
Contents
Getting Started
Features
Preparing Keyboard, mouse and receiver
Hardware Installation
-- Connect the receiver
+--- USB Interface
-- Inserting batteries
+--- Inserting batteries into mouse
+--- Inserting batteries into keyboard
-- Setting frequency channel or ID
+--- Setting frequency channel on keyboard and mouse
+--- Setting ID on keyboard and mouse
Software Installation
-- Installing software for mouse
-- Installing software for keyboard
Displaying keyboard Modes
Working with keyboard and mouse
-- Using mouse wheel
-- Keyboard battery indicator
-- Writing using the keyboard
-- Cleaning the keyboard and the mouse
Product Specification
Troubleshooting and tips
Getting Started
Thank you for choosing this Wireless keyboard and Mouse Kits. It operates with
digital radio technology to ensure no hinder communication between the keyboard,
the mouse and your computer without connecting cable.
The transmission and receiving of keyboard and mouse are free from angle
restriction. There are two frequency channels each for keyboard and mouse to
prevent malfunctions when you operate several radio transmission devices
simultaneously.
Features
. Complies with Directive 1995/5/EC of the European Parliament and
Commission.
. Complies with the mutual recognition of conformity 1999 for radio and
telecommunications Equipment.
. Manufactured with environmental friendly recycled materials.
. Fully compliant with original USB version 1.0 and 1.1.
Preparing Keyboard, mouse and receiver
Before working with your new keyboard and mouse, look at the “Hardware
Installation” , and take a few one-time preparations.
Hardware Installation
Place the receiver at least 20 cm from other electrical devices (e.g. monitor) to
achieve optimum performance.
The distance between the keyboard, mouse and receiver should not exceed 5
feet. Do not place the receiver on metal surfaces.
Step 1: Connect the receiver
1. Plug the receiver connector into an USB port.
2. SYSTEM will take around 10 sec to find your keyboard and mouse
automatically. (PS : If your OS is Windows® 98, please follow the screen
instruction to complete your keyboard and mouse installation)
3. Please keep your receiver from the other electrical devices about 8 inches. The
other electrical devices may influence your receiver sensitivity.
4. Put two batteries into your keyboard battery chamber, and another two
batteries into your mouse battery chamber.
Setp 2: Insert batteries
. Inserting batteries in mouse
The mouse requires two alkaline batteries (AA or AAA).
(1) Please remove the battery compartment cover on the bottom of the mouse.
(2) Insert the two alkaline batteries (AA or AAA) in the battery compartment.
(3) Fix the battery compartment cover (1) on the bottom of mouse again
Dangerous!! Please only use batteries of the same type.
. Inserting batteries in keyboard
The keyboard requires two alkaline batteries (AA).
(1) Remove the battery compartment cover (1) on the bottom of the keyboard by
pushing it in the direction of arrow.
(2) Insert two AA batteries.
The illustration in the battery compartment (2) shows how to insert the batteries
properly.
(3) Recover the battery compartment by pushing the locking lug (2) under the
battery compartment.
Note: Please do not push the channel setting button (3) at one side of the battery
compartment cover. It may cause the channel or ID change. It is the same to
mouse and keyboard.
Setp 3: Setting frequency channel or ID
For the radio connection, set the keyboard to receiver, and mouse to receiver,
with the same frequency channel and ID. Different ID can keep the keyboard and
mouse working well in the same frequency or channel. There are 255 IDs for both
keyboard and mouse. Change the frequency or channel may prevent interference
between two devices.
. Setting frequency or channel on keyboard and mouse
(1) Push the connection button on the top of receiver. The indicator will be
blinking.
(2) Push the button on the bottom of keyboard or mouse. The channel will be
changed after the button released.
Note: Please do not hold the button until 3 seconds. It will change the ID, instead
of channel.
. Setting ID on keyboard and mouse
(1) Push the connection button on the top of receiver. The indicator on the top of
receiver will be blinking.
(2) Hold down the button on the bottom of keyboard and mouse until 3 seconds.
The ID will be changed after the button released.
Software Installation
. Installing software for mouse
The software for the mouse provided, only supports Windows 98, Windows ME,
Windows 2000 and Windows XP. Install the software to use all mouse functions.
(1) Start the computer and insert the data carrier in the corresponding drive.
(2) Start the" Setup "program from the data carrier and follow the instructions on
the screen.
You may also use any standard mouse software. However, it is possible that
(depending on the software used) not all mouse functions are available.
. Installing software for keyboard
(1) Start the computer and insert the CD ROM.
(2) Start the "Setup "program from the CD ROM and follow the instruction on the
screen.
Once you have installed the software, the following symbols will display on
Windows taskbar, the multimedia keys can be activated.
Displaying keyboard Modes
The symbols indicate which keyboard mode is active. They match the displays on
ordinary keyboards.
The symbol is green when the respective mode is activated and light grey when it
is deactivated.
Uppercase mode (Caps Lock)
Virtual numeric keypad (Num Lock)
Stop screen output (Scroll Lock)
Keyboard battery low indicator
Mouse battery low indicator
Working with keyboard and mouse
The following sections contain information on using the keyboard and the mouse.
Using mouse wheel
In addition to two buttons, the mouse also has a wheel that can be used as
follows:
• As a 3rd button: press on the wheel.
• For scrolling, e.g. in documents or on Internet pages: turn the wheel forward or
back.
You can specify further settings in the mouse software.
Keyboard battery indicator
The battery indicator on the screen shows you the charging state of the batteries.
If the battery indicator lights up when a key is pressed, the batteries are gradually
becoming weaker. Replace them in the near future.
Writing using the keyboard
The keyboard is ergonomically designed to ensure ease-of-use.
Inconvenient arrangement of the input and output devices, awkward arm
movements or posture, or working with the keyboard or mouse for lengthy periods
without a break can lead to tenseness, fatigue, and damage to the locomotors
system (nerves, muscles, tendons, and joints).
You can considerably reduce the risk of this happening if you follow the advice
given below.
• Arrange your workplace in accordance with the recommendations for an
ergonomic workstation provided in the PC Operating Manual.
• Position the keyboard so that you can use it without any noticeable strain. The
keyboard should be level with the upper part of you body. This prevents any
tension in the shoulders and arms.
• The distance between the keyboard and the edge of the desk should be 5 to 10
cm.
• When typing, hold your hands and forearms so that they form as natural a line as
possible. Do not turn your hands too far to the left or right.
• Keep your wrists straight while typing. Do not angle your hands upwards or
downwards.
• Do not rest your hands on the balls of your thumbs while typing, and do not
strike the keys too hard.
• Relax your hands by occasionally taking a break from typing. During these
breaks you should rest your hands on the balls of your thumbs or place your
arms on the armrests of your chair.
Cleaning the keyboard and the mouse
• Use disinfectant wipes to clean the keyboard and the mouse.
• Do not use any dissolvent, which may damage the surface of your keyboard and
mouse.
Product Specification
Receiver Interface: USB interface.
Frequency band: Two channels for keyboard and two channels for mouse.
Keyboard – 27.145 MHz and 27.195 MHz
Mouse – 26.995 MHz and 27.045 MHz
Frequency modulation : FSK mode
Radio power: < 1 mW
Power rating:
Keyboard: 3 V, 30 mA (MAX)_
Mouse: 3 V, 50 mA (MAX)_
Receiver: 5 V, 100mA (MAX) for USB
Battery:
Keyboard: 2 pieces of AA Batteries
Mouse: 2 pieces of AA Batteries (for Optical mouse)
2 pieces of AAA Batteries (for Ball mouse)
Battery life time:
Keyboard: 500 hours reference (operating mode)
Mouse: 50 hours reference (operating mode)
Operation distance:
Keyboard: 6 feet without signal disturbance and no direction limit.
Mouse: 5 feet without signal disturbance and no direction limit.
Mouse detection method:
Mouse: Mechanical tracking method (Roll ball optical sensor)
Mouse resolution: 400 DPI
Operating temperature: 0º C~ 40º C.
Storage temperature: -10º C ~ 60º C.
Troubleshooting and tips
The keyboard or mouse does not operate following installation or is not
recognized.
. Make sure that the batteries have been inserted correctly according to the
polarity and the receiver is well connected.
. Check that your USB port is configured properly.
. Check whether the respective channels and ID are set on the receiver and the
keyboard or mouse.
. Make the connection between the receiver and the keyboard and mouse. Press
a mouse button and then the connection button on the receiver.
. Make sure the batteries are not too weak.
. Remove the batteries from the device. Please press any button on the device
several times to prevent any unexpected failure after batteries being put in.
. Change the location of the receiver to have a best sensitivity.
. To determine whether the keyboard, mouse or computer causes the problem
test the keyboard and mouse on a second computer if possible; or test another
keyboard and mouse on your current computer.
If you are still unable to solve the problem, please contact your point of sale or
your dealer.
If you need to exchange the keyboard, please note that you must return it to your
dealer in its original packaging and also a produce proof of purchase (receipt).
Keep your receipt in a safe place after purchase.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:10:03 15:12:06+08:00
Create Date                     : 2003:10:02 17:52:09+08:00
Page Count                      : 8
Creation Date                   : 2003:10:02 09:52:09Z
Mod Date                        : 2003:10:02 09:52:09Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : UserFree
Metadata Date                   : 2003:10:02 09:52:09Z
Creator                         : UserFree
Title                           : Contents
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools