Chicony Electronics Co MSR0238B Wireless Mouse User Manual User s Guide for Wireless Input Device

Chicony Electronics Co Ltd Wireless Mouse User s Guide for Wireless Input Device

Revised Manual

1User’s Guide for Wireless Input DeviceA. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTThis device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class Bdigital device, Pursuant to Part 15 the FCC rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of thefollowing measures:! Reorient or relocate the receiving antenna! Increase the separation between the equipment and receiver! Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected! Consult the dealer or an experienced radio/TV technician for helpYou are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to opeate the equipment.CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUTBREAKS. Take regular breaks and keep a good posture. Consult your physicianpromptly if you notice any lost of motion or pain in your wrist when using thekeyboard.WARNING:
2B. PRODUCT SPECIFICATION1. Frequency Band: Mouse 27.045 27.0952. Channel: 2 channels for mouse3. Frequency Modulation: FSK mode4. Power Ratting:Mouse 3V, 50mA (max)Receiver 5V, 100mA (max)5. RF Power: <10mW6. Battery Life Time:Mouse: 50 working hours with continuous operation7. Operating Temperature: 0℃ ~ 40℃Storage Temperature: -10℃ ~ 60℃C. HARDWARE INSTALLATION1. Plug the receiver connector into USB port on your computer2. Load two AA batteries to battery chamber of mouseD. CHANNEL SETTING WHEN INTERFERENCE OCCURS1. The first binding by userStep 1 – Push the button on receiverStep 2 – Push the button on back of mouse2. Change channelPush the button on the back of mouseAlternate:Step 1 – Press receiver button, LED green light is blinkingStep 2 – Push mouse button on back of device and then LED lightstops blinking on receiver to confirm channel is changed.3. Change IDStep 1 – Press receiver button, LED green light is blinking.Step 2 – Push the button on the back of mouse more than two secondsand release, LED green light becomes blinking faster in 3 seconds andthen light is off.Note: To have maximum performance, avoid placing receiver,keyboard and mouse on metallic surface. Operating distancebetween keyboard, mouse and receiver will depend on theenvironment around. User can try various locations for the receiverin order to find best operating performance.

Navigation menu