Chief Manufacturing Pcm Series Users Manual INSTALLATION INSTRUCTIONS

PCM Series to the manual ae6a0748-943d-4c50-997b-6078c1153455

2015-02-05

: Chief-Manufacturing Chief-Manufacturing-Pcm-Series-Users-Manual-534979 chief-manufacturing-pcm-series-users-manual-534979 chief-manufacturing pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

INSTALLATION INSTRUCTIONS
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação

Istruzioni di installazione
Installatie-instructies
Instructions d´installation

Plasma Ceiling Mount
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description

PCM SERIES

Installation Instructions

DISCLAIMER
Milestone AV Technologies, Inc., and its affiliated corporations
and subsidiaries (collectively, "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject to
change without notice or obligation of any kind. Milestone makes
no representation of warranty, expressed or implied, regarding
the information contained herein. Milestone assumes no
responsibility for accuracy, completeness or sufficiency of the
information contained in this document.

IMPORTANT WARNINGS AND
CAUTIONS!

WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.

WARNING: Failure to provide adequate structural strength
for the installation of this kit can result in serious personal
injury or damage to equipment! It is the installer’s
responsibility to make sure the structure to which this mount is
attached can support five times the combined weight of all
equipment.

WARNING: Exceeding the weight capacity can result in

serious injury or death if you do not follow the instructions.

serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to this mount does not exceed
200 lbs (91 kg).

CAUTION: A CAUTION alerts you to the possibility of

WARNING: The installer is responsible for verifying that the

WARNING: A WARNING alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

1 1/2” NPT fixture this mount is installed on is capable of
supporting four times the maximum weight capacity of the
mount as stated above.

LEGEND
Tighten Fastener

Adjust

Apretar elemento de fijación

Ajustar

Befestigungsteil festziehen

Einstellen

Apertar fixador

Ajustar

Serrare il fissaggio

Regolare

Bevestiging vastdraaien

Afstellen

Serrez les fixations

Ajuster

Сожмите Застежку

Приспособьтесь

Loosen Fastener

Hex-Head Wrench

Aflojar elemento de fijación

Llave de cabeza hexagonal

Befestigungsteil lösen

Sechskantschlüssel

Desapertar fixador

Chave de cabeça sextavada

Allentare il fissaggio

Chiave esagonale

Bevestiging losdraaien

Zeskantsleutel

Desserrez les fixations

Clé à tête hexagonale

Ослабьте Застежку

Главный ведьмой Рывок

Open-Ended Wrench

Phillips Screwdriver

Llave de boca

Destornillador Phillips

Gabelschlüssel

Kreuzschlitzschraubendreher

Chave de bocas

Chave de fendas Phillips

Chiave a punte aperte
Steeksleutel
Clé à fourche
Открытый Рывок

Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Отвертка

Installation Instructions

PCM SERIES

TOOLS REQUIRED FOR INSTALLATION AND PARTS

3/16" (provided)

A (1)

B (1)

I/M

C (1)
D (6)

DIMENSIONS

Figure 1

PCM SERIES

Installation Instructions

Mount Assembly and Installation
1.
2.
3.

Fold tube out until tube mounting bracket rests against
faceplate mounting bracket. (See Figure 2)
Secure tube to faceplate mounting bracket using 3/16" hex
wrench (C) and two 5/16-18 x 1/2" button head cap screws
(D).
Tighten all hardware.

Display Installation
If the mounting pattern of the display being installed is a VESA
standard 200 x 200 pattern the mounting buttons can be
installed directly to the back of the display. If the display has any
other mounting pattern an interface bracket must be obtained
before proceeding. Consult a Chief Customer Service
representative if an interface bracket is required by calling
1-800-582-6480 or visit www.chiefmfg.com.

WARNING: IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SEVERE PERSONAL INJURY
OR DAMAGE TO EQUIPMENT. Displays can weigh in
excess of 40 lbs (18.1kg). ALWAYS use two people and
proper lifting techniques when installing display.

WARNING: IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SEVERE PERSONAL INJURY
OR DAMAGE TO EQUIPMENT. Make sure mounting buttons
on display are properly seated in mounting holes in faceplate.
To install display:
1.

(D) x 2

Figure 2
4.

While supporting both sides of display, align four mounting
buttons on display or interface bracket with four mounting
holes in faceplate. (See Figure 4)
Lower display into place listening for audible "click" to
ensure recessed area of mounting buttons are properly
seated in lower area of mounting holes and "click lock"
mechanism has engaged. (See Figure 4) and
(See Figure 5)

Thread the tube assembly (A) onto 1-1/2” NPT.

NOTE: The product is suitable for use with a Listed ceiling

plate which can accommodate 1-1/2" NPT pipe, and
has a rated weight capacity of 200 lbs (91 kg).
Secure faceplate (B) to faceplate mounting bracket using
3/16" hex wrench (C) and four 5/16-18 x 1/2" button head
cap screws (D).

(A) x1

(B) x 1

Figure 3

(D) x4

Figure 4
NOTE: Holes are provided in the faceplate for use with a
padlock or similar locking device, if desired. In addition,
the pin and nut may be removed from the upper holes
and moved to the lower holes for use as a more
permanent locking device. (See Figure 5)

Installation Instructions

PCM SERIES
Display Roll Adjustment
To adjust display roll:

To use as a
more permanent
lock, remove pin
and nuts and move
to lower holes

1.
2.
3.

Loosen 3/8-16 Nylock nut. (See Figure 7)
Adjust faceplate to desired position. (See Figure 7)
Tighten 3/8-16 Nylock nut. (See Figure 7)

A padlock or bolt may
be placed through latch holes

Figure 5

2
3

Adjustments
The PCM is designed to accommodate 5" of display height
adjustment, 4º right and left display roll adjustment, and 15º
down/5º up display pitch (Tilt) adjustment.
Remove display before performing adjustments.

Figure 7

Display Height Adjustment

Display Pitch (Tilt) Adjustment

To adjust display height:
1.
2.
3.

Loosen four 5/16-18 button head cap screws using 3/16"
hex wrench (C). (See Figure 6)
Adjust faceplate to desired position. (See Figure 6)
Tighten four 5/16-18 button head cap screws using 3/16"
hex wrench (C). (See Figure 6)

To adjust display pitch:
1.
2.
3.

Loosen four 5/16-18 button head cap screws.
(See Figure 8)
Adjust to desired tilt position. (See Figure 8)
Tighten four 5/16-18 button head cap screws.
(See Figure 8)

2
3
2

Figure 6

Figure 8

PCM SERIES

Installation Instructions

PCM SERIES

Installation Instructions

Chief Manufacturing, a division of
Milestone AV Technologies

Europe

A
P
F
A
P
F
A

8401 Eagle Creek Parkway, Savage, MN 55378
800.582.6480 / 952.894.6280
877.894.6918 / 952.894.6918
Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands
+31 (0)40 2668620
+31 (0)40 2668615
Room 24F, Block D, Lily YinDu International Building
LuoGang, BuJi Town, Shenzhen, CHINA.

P +86-755-8996 9226
F +86-755-8996 9217

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Keywords                        : PCM-SERIES, REV E, 8805-000114, 04-08
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:12:12 10:34:12-06:00
Create Date                     : 2008:12:12 10:29:56-06:00
Metadata Date                   : 2008:12:12 10:34:12-06:00
Format                          : application/pdf
Title                           : PCM SERIES INSTALLATION INSTRUCTIONS
Creator                         : 
Subject                         : PCM-SERIES, REV E, 8805-000114, 04-08
Document ID                     : uuid:b11bca46-8da8-4b7d-bd34-15b04e93b4fc
Instance ID                     : uuid:672cd38f-f3d8-4e9d-a1a3-cd51f4e55a24
Page Count                      : 8

EXIF Metadata provided by EXIF.tools

Chief Manufacturing Pcm Series Users Manual INSTALLATION INSTRUCTIONS

PCM Series to the manual ae6a0748-943d-4c50-997b-6078c1153455

Navigation menu

Versions of this User Manual:

Views

Navigation