ChipSiP Technology CWFB211-XXX 5G +2.4G 2T/2R WLAN FMC User Manual rev01

Download:
Mirror Download [FCC.gov]
Document ID	1910990
Application ID	xaQfC3ifJYwhNT8ir/BqTA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.88kB (61044 bits)
Date Submitted	2013-03-05 00:00:00
Date Available	2013-03-06 00:00:00
Creation Date	2013-03-01 18:29:47
Producing Software	Acrobat Distiller 9.5.3 (Windows)
Document Lastmod	2013-03-01 18:29:47
Document Title	Microsoft Word - user manual _rev01_
Document Creator	PScript5.dll Version 5.2.2
Document Author:	10003808

CWFB211-XXX
Specification
Revision 01
2012/09/12
Prepared By: Jeff Hsieh
Revision History
Revision
01
Date
2012/09/12
Notes
Owner
Initial Release
Jeff Hsieh
1. Wireless Spec.
WLAN: 2X2 MIMO
Frequency Range
Wi-Fi
Peak
Modulation
Rated Power
Technology
Channels
(MHz)
802.11b
2412 – 2462(DTS)
11
802.11g
2412 – 2462(DTS)
11
23.87dBm
11
23.77dBm
19.52dBm
DSSS
DSSS, OFDM
HT20
2412 – 2462(DTS)
802.11n
OFDM
HT40
23.71dBm
5180 – 5240(NII)
9.19dBm
5745 – 5825(DTS)
23.88dBm
8.65dBm
24.81dBm
2422 – 2452(DTS)
802.11a
OFDM
HT20
5180 – 5240(NII)
HT20
5745 – 5825(DTS)
802.11n
OFDM
HT40
10.93dBm
24.60dBm
5190 – 5230(NII)
HT40
5755 – 5795(DTS)
Modulation type
Transition Rate:
CCK, DQPSK, DBPSK for DSSS
64QAM. 16QAM, QPSK, BPSK for OFDM
Upto 300Mbps
Antenna Designation:
Manufacturer
Ant 1
Ant 2
Ant 3
Ant 3-1
Ant 3-2
Ant 3-3
Ant 4
Ant 5
Model No.
Airwave Technologies
EDA-8709-25GR2-A4-RM
INC.
ARISTRTLE
Tranwo technology
corp.
Tranwo technology
corp.
Tranwo technology
corp.
Tranwo technology
corp.
UDM Group
Technology Co., Ltd
Unictron Technologies
Corporation
RFA-25-C2S1-70-90
SD001-201003-A101
RFA-05-2-L14M3-B70-1
Type
Revise SMA,
unique
Dipole Ant
2 dBi
2 dBi
unique
Dipole Ant
2 dBi
2 dBi
Dipole Ant
2dBi
2 dBi
Dipole Ant
2dBi
2 dBi
Revise SMA,
unique
Revise SMA,
unique
202-000442-00
unique
Patch Ant
0 dBi
-1 dBi
202-000441-00
unique
Patch Ant
0.5 dBi
-0.5 dBi
26-52-01800G
unique
2.5 dBi
4 dBi
H2P566WKBA0100
unique
2.3 dBi
4dBi
This antenna list table could be used for CWFB211-XXX..
The max gain of 2.4G: 2.5dBi.
The max gain of 5G: 4dBi.
Gain
Gain
(2.4GHz) (5GHz)
Connector
Type
PCB Ant
(Green)
PCB Ant
(Blue)
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter and this equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
When suing IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation
in the 5.15 to 5.25GHz frequency range. The FCC requires this product to be used indoors for the
frequency range of 5.15 to 5.25GHz to reduce the potential for harmful interference to co channel
mobile satellite systems.
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove. This RF module in the user’s manual of the end product which integrates this
module. The user’s manual for OEM Integrators must include the following information in a
prominent location
End Product Labeling:
The final end product must be labeled in a visible area with the following:
“Contains FCC ID: O7N-CWFB211-XXX”.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 10003808
Create Date                     : 2013:03:01 18:29:47+08:00
Modify Date                     : 2013:03:01 18:29:47+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.5.3 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - user manual _rev01_
Creator                         : 10003808
Document ID                     : uuid:adb0cced-873a-470d-ba0b-f2cfb97f3968
Instance ID                     : uuid:943c02c8-f690-4d6f-bbb2-2026c55372b4
Page Count                      : 5

EXIF Metadata provided by EXIF.tools