Chuango Security Technology D102 Door/Window Contact User Manual 1
Chuango Security Technology Corporation Door/Window Contact 1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2268748 |
| Application ID | THu2UEbd5fM5abKFPml9hg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 112.24kB (1402973 bits) |
| Date Submitted | 2014-05-16 00:00:00 |
| Date Available | 2014-05-16 00:00:00 |
| Creation Date | 2014-05-09 19:04:55 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2014-05-15 09:21:21 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | chuango-LS |
PCB Layout DWC-102 AA 1.5V LR6 Wireless Door/Window Contact Tamper switch User Manual Zone setup NOTE: Tamper will be triggered no matter the door/window contact is armed or disarmed. Introduction The DWC-102 is a Door/Window Contact that can be installed on doors, windows, and any other objects that open and close. The sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away. It will also transmit alert signal to the control panel in case of low battery. External input for wired accessory is available at the N/C interface. The tamper protection ensures that sabotage attempts to move the contact will result in an alarm activation. LED Indication LED flashes once: Door/window is opened and transmitter sends signal to the control panel. Flash once per 3 seconds: Low power indication, please change battery as soon as possible. (User will get alert SMS about the low battery if the door contact is connected to the GSM alarm system.) Installation & Notice Product Overview LED indicator Transmitter Magnet Open the case and remove the battery activation strip. Mount the sensor on the door frame and the magnet on the door. Make sure the magnet is on the right side of the transmitter Place the transmitter in the desired location, mount the magnet no more than 1cm away from the transmitter and secure the transmitter and magnet with double-sided tapes or screws. Avoid mounting sensors in areas with a large quantity of metal or electrical wiring, such as a furnace or utility room. Specifications DC 1.5V (AA 1.5V LR6 Battery x 1 pc) Power supply Static current ≤ 35uA Alarm current ≤ 10mA ≤80m (in open area) Transmitting distance Radio frequency 315MHz (±75KHz) Housing material ABS plastic Operating temperature -10°C~+55°C Relative humidity ≤80% (non-condensing) Transmitter dimensions (LxWxH) 71 x 34 x 17.5mm Magnet dimensions (LxWxH) 51 x 12 x 13.5mm FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.. Ver : DWC-102-EN-1405-V5.0 2014 Chuango. All rights reser ved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : chuango-LS Create Date : 2014:05:09 19:04:55+08:00 Modify Date : 2014:05:15 09:21:21-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : chuango-LS Title : 未命名 -1 Creator Tool : CorelDRAW X6 Metadata Date : 2014:05:15 09:21:21-07:00 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:972c3eed-9605-4157-8f45-ac0528091864 Instance ID : uuid:fc2ec520-ae3b-446e-9c2a-12537e3e5a2a Page Count : 1EXIF Metadata provided by EXIF.tools