Chuango Security Technology G5 GSM Alarm System User Manual G5 EN Oct 2012 V1

Download:
Mirror Download [FCC.gov]
Document ID	1882717
Application ID	7+7bY8sF3E6Ys56GwMbFmg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	56.72kB (708966 bits)
Date Submitted	2013-01-19 00:00:00
Date Available	2013-01-19 00:00:00
Creation Date	2012-12-20 14:21:52
Producing Software	Corel PDF Engine Version 1.0.0.525
Document Lastmod	0000-00-00 00:00:00
Document Title	G5-EN-Oct-2012-V1.cdr
Document Creator	CorelDRAW 12.0 版

GSM Alarm System
Printed in Hong Kong
PA: OI-G5/EN-Oct.2012-V1.0
FCC Statement
GSM Alarm System
Features
Control Panel Layout
ARM + Auror CPU
GSM Signal Indicator
Support 10 remote controls, 50 wireless sensors
GSM network searching: Flashes once every second
and 50 RFID tags
GSM signal in normal: Flashes once every two seconds
RFID Reader / Play Voice Memo
Built-in 1,000,000 RF codes combination
maintains high reliability
Status Indicator
Touch Keypad
Cellular communicator, simple operation
Store 5 phone numbers, 1 speed-dial number,
and 1 RFID SMS notification number
Exit and entry delay
SMS alert for low battery of two-way accessories
Arm and disarm the system by SMS or free phone call
Remote monitoring site via phone
Built-in loud speaker for siren and two-way talking
Built-in two pieces of 800mAh lithium batteries
enable 5-hour standby
Arm
SMS alerts for power failure, power recovery
and low battery
850/1900MHz GSM frequency,
applicable for universal
Disarm
Call
Stay Arm (Home Mode)
Record Voice Memo /
Connect Button
Bottom
Back-up Batteries
Arm
Press
to arm the system.
Home mode
Press
to arm the sytem in home mode.
All the sensors in Normal Zone are armed except those in
Home Mode Zone which are disarmed so that user can move
freely at home.
Disarm on keypad:
Input 4 digits password (default:1234) , and press
the system after one beep.
If three beeps are heard, password is wrong and
please input again.
to disarm
Loudspeaker
Tamper Switch
Buzzer
MIC
Disarm by RFID tag:
Induce the RFID tag to the RFID Reader area to
disarm the system.
Bottom
Record / Play Voice Memo
Press
to record 10 seconds voice messages.
Or send SMS to system for calling back to record the
SIM Card Slot
voice messages. The Play Voice Memo Button will be
flashing in purple to remind you. Users can touch the
center of circle to listen to the voice memo. The LED
indicator blacks out when the voice memo is played.
Input for Wired Sensors
(24-hour zone)
Input for Wired Sensors
(normal zone)
Output for
Electronic Lock
Replay by touching it again.
Output for Wired Siren
≤ 500mA
Adapter Interface
Power On/Off
SMS Operation
Speed Dial
Press Call Button
, the panel auto dials to pre-stored
Insert a SIM card to the control panel,
phone number of the host, the LED blacks out after talk.
then send a text of “?” to the SIM card number,
User can also press Call Button
the operation guide message will be replied.
to end talk.
You can control the alarm system by
following the guide message:
Send:
Phone Call
Dial phone number and then press Call Button
to
start talk, the LED blacks out after talk.
User can also press Call Button
to end talk.
System replies first grade guide menu:
Electronic Lock Output
When system is disarmed, the output signal opens
‘0’ Disarm
‘1’ Arm
‘2’ Home mode
‘3’ Two-way talk
‘4’ Call-back voice memo
‘00’ Settings inquiry
‘??’ Store phone and SMS No.
electronic lock automatically.
Send:
??
System replies second grade guide menu:
‘5’ Store alarm phone No.
‘6’ Store alarm SMS No.
‘7’ Store SMS No. for RFID tags
‘8’ Store speed dial phone No.
‘???’ System setups
Disarm
Send:
System disarmed.
Send:
???
System replies third grade guide menu:
‘91~99’ Zone name
‘10’ RFID tags SMS notice
‘11’ Entry and exit delay time
‘12’ Siren volume and ringing time
‘13’ Disarm password
‘14’ Single zone delay time
10
Arm
Two-Way Talk
Send:
Send:
System armed.
Send ‘3’ to the SIM card number, the alarm will call back.
Pick up the phone and start two-way talk.
Stay Arm (Home Mode)
Call-Back to Record Voice Memo
Send:
Send:
Send ‘4’ to the SIM card number, the alarm will call back.
System in home mode.
Pick up the phone, and leave 10 seconds message.
The panel will hang up after 10 seconds.
11
12
Settings Inquiry
Store Alarm Phone No.
Send:
Send:
00
System status
Entry and exit delay time: 0sec
Single zone delay time: 30sec
Siren volume: 2
Siren ringing time: 5min
Disarm password: 1234
TEL:
1.
2.
3.
4.
5.
Note:
Value of default setting will be changed
once users finish programming.
Forward > Edit
TEL:
1. 67890033
2. 67890022
3. 67890011
4. 67890000
5.
Store alarm phone No.
successfully.
13
14
Store Alarm SMS No.
Store SMS No. for RFID tags
Send:
Send:
SMS:
1.
2.
3.
4.
5.
SMS No. for RFID tags
(0-20 digits):
1.
Forward > Edit
Forward > Edit
Store alarm SMS No.
successfully.
15
SMS:
1. 67890033
2. 67890022
3. 67890011
4. 67890000
5.
Note:
Only after SMS No. is stored, and the
RFID tags SMS notice is changed, users
can receive notice SMS once someone
disarms the system by RFID tag.
SMS No. for RFID tags
(0-20 digits):
1. 67890033
Store SMS No. for RFID
tags successfully.
Note: Only after SMS No. is stored, and the RFID tags
SMS notice is changed, users can receive notice SMS
once someone disarms the system by RFID tag.
16
Store Speed Dial Phone Number
Change Zone Name
Send:
Special Tips!
Users can change the 1st~ 9 th zone names. The zone name should be 30
English characters at most for each line due to SMS character limit.
Other alarm zones are fixed as Zone 10 alarm, Zone 11 alarm and so on.
Send: 91~99
Speed dial phone number
(0-20 digits):
1.
91
Zone1 name: Zone 1 alarm
Forward > Edit
Speed dial phone number
(0-20 digits):
1. 67890033
Forward > Edit
Zone1 name: Entrance door sensor
Store speed dial phone
number successfully.
Change zone name
successfully.
17
18
SMS Alert for Low Battery of Accessories
(available for two-way accessories such as DWC-102 and PIR-900/910)
SMS will be sent for 1-9 zones with its zone name as
“Zone name + low battery”.
Bedroom PIR low battery.
Change RFID Tags SMS Notice
Send:
10
SMS alert for 10~50 zones will be “Zone number + low battery”.
Zone 10 low battery.
SMS Alert for Tamper Alarm of Accessories
Change RFID tags SMS
notice:
1.
2.
3.
4.
(available for two-way accessories such as DWC-102 and PIR-900/910)
SMS will be sent for 1-9 zones with its zone name as
“Zone name + tamper alarm”.
Bedroom PIR tamper
alarm.
Forward > Edit
Change RFID tags SMS
notice:
1. Tom
2. Nurse
3. Nancy
4. David
SMS alert for 10~50 zones will be “Zone number + tamper alarm”.
Zone 10 tamper alarm.
19
Change RFID tags SMS
notice successfully.
Note:
Only after SMS No. is stored, and the
RFID tags SMS notice is changed, users
can receive notice SMS once someone
disarms the system by RFID tag.
20
Entry and Exit Delay Time
Siren Volume and Ringing Time
Send:
Send:
11
12
Entry and exit delay time
(0-300 sec.):
Forward > Edit
Siren volume(0 Mute,
1 Low, 2 High):
Siren ringing time(1-9min):
Entry and exit delay time
(0-300 sec.):
10
Forward > Edit
Set delay time
successfully.
Notice!
If users don’t want to take remote control or RFID cards with them,
this function can be used. Once the delay time is set, when you arm the system,
one beep will be heard every second to remind the user to leave.
The reminding rhythm will be speeded up in the last 15 seconds.
Once the intruder is detected, the alarm will be delayed accordingly.
21
Siren volume(0 Mute,
1 Low, 2 High):
Siren ringing time(1-9min):
Set siren volume and
ringing time successfully.
22
Disarm Password
Single Zone Delay Time
Send:
Send:
13
14
Disarm password(4-6 digits):
1234
Single zone delay time (0-300 sec.):
30
Forward > Edit
Set disarm password
successfully.
23
Disarm password(4-6 digits):
8888
Forward > Edit
Single zone delay time (0-300 sec.):
15
Set single zone delay time
successfully.
24
Change System Language
Delete Wireless Accessories by SMS
Send: 0086 to change language to be Chinese
Send:
21
0086
Delete wireless accessories
successfully.
中文语言修改成功!
Or press Tamper Switch 3 times within 3 seconds,
accessories will be cleared after two beeps.
Send: 0001 to change language to be English
Delete RFID Tags by SMS
0001
Send:
22
Set English successfully.
Delete RFID tags
successfully.
25
26
Restore System to Default Setting by SMS
Arm & Disarm by Free Phone Call
Send:
Arm
Call the control panel number, hang up when hearing
0000
the ring tone. The panel will call back. The user hangs
up the phone directly to arm the system.
System has been restored
to factory settings.
Disarm
Call the control panel number, hold on until the panel
hangs up the call.The panel will not call back. System
Or press Tamper Switch 5 times within 3 seconds,
the system will be restored to factory settings after
two beeps.
Note:
After programming, only stored numbers can send SMS to
restore the system.
is disarmed.
Connect Wireless Accessories & RFID Tags
Input 4-6 digits password, press Connect Button
the LED indicator lights up, then trigger the accessory
or RFID tag once within 15 seconds, the connection is
successful after a beep.
Once two beeps are heard, the accessory has been
connected before. The first connected accessory is in
Zone 1, the second one in Zone 2, and so on.
27
28
Connect Wireless Siren
Specifications
The newly-added wireless siren can be used after
Product name :
connecting to the control panel.
GSM Alarm System
Model No. :
Operation:
CG-G5
Press the Connect Button of the wireless siren for 0.5 second,
Control panel’s power supply :
the Connect Button LED indicator lights on, and then press
Input: AC 110-240V/50-60Hz
the Arm Button on the control panel, the siren will be
Output: DC 12V/500mA
connected after one beep is heard.
GSM working frequency :
Testing: Press the Arm Button on the remote control, to make
sure that the internal siren and wireless siren both beep once,
850/1900MHz
Standby current :
the connection is successful. If not, the connection fails,
110mA
please reconnect them.
Alarm current :
340mA
Once the intruder is detected, both internal siren and wireless
Internal battery backup :
siren will hoot to deter the illegal intruder. (The siren will be
Lithium Battery : 3.7V/800mAh x 2 PCS (BL-5B)
off in 5 minutes as the default setting). At the same time, the
Internal siren :
alarm system will send SMS and auto dial to users.
105dB
Allowed amount of expandable wireless accessories
10pcs remote controls, 50pcs wireless accessories,
and 50pcs RFID tags.
29
30
Radio frequency
315.8599MHz & 125KHz
Housing material
ABS plastic
Operation condition:
Temperature: -10ºC~55 ºC
Humidity: ≤ 80%(non-condensing)
Size (L x W x H) :
Panel : 188×132×26mm
31
32

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creation Date--Text             : 
Mod Date--Text                  : 
Producer                        : Corel PDF Engine Version 1.0.0.525
Creator Tool                    : CorelDRAW 12.0 版
Modify Date                     : 2013:01:10 14:34:12+08:00
Metadata Date                   : 2013:01:10 14:34:12+08:00
Format                          : application/pdf
Title                           : G5-EN-Oct-2012-V1.cdr
Document ID                     : uuid:2cdc52fa-7699-47c6-a8b0-463ef9eb78db
Instance ID                     : uuid:6c6361ee-ef16-4770-8e28-d1054597f293
Page Count                      : 18
Create Date                     : D:20121220142152
Creator                         : CorelDRAW 12.0 版

EXIF Metadata provided by EXIF.tools