Chuango Security Technology MD20 MD-20 Pet Friendly Motion Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3417714
Application ID	JB9jcsdSM3nUu4PqRVfFXg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	96.86kB (1210774 bits)
Date Submitted	2017-06-08 00:00:00
Date Available	2017-06-08 00:00:00
Creation Date	2017-05-25 20:07:14
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2017-05-27 08:57:34
Document Title	User Manual
Document Creator	Adobe InDesign CC 2014 (Windows)

MD-20
Pet-Friendly Motion Sensor
EN
© 2017 SMANOS HOLDING LTD. All Rights Reserved.
Printed in China
Ver: MD-20-UM-ML-V1.0
DE
FR
NL
ES
USER MANUAL
PT
IT
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital, pursuant to Part 15 or the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not in stalled and used in
accordance with the instructions, may casue harmful interference
to radio communications, However, there is no guarantee
that interference will not occur in a particular installation. If
the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for
help.
Industry Canada Notice
This device complies with Industry Canada licence-exempt RSS
standard(s).
1. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interferencethat may cause undesired operation of the device."
2.Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Avis d'Industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement. Cet appareil numérique ne dé
passe pas les Rèlements sur l'interférence radio par un appareil num
érique de classe B stipulées dans les Règlement sur l'interférence
redio d'industrie Canada.
Introduction
The MD-20 Pet-Friendly Motion Sensor is a sensor that detects
suspicious motion while ignoring motion from your pets under
50 lbs / 23 kg. The sensor is suitable for homes & small business/
offices. The most common placements are in livingrooms, lobbies,
hallways & garages to name a few. The detection range is between
0 & 9m/0-29' straight ahead. Please keep this in mind when placing
keeping in mind windows where unwanted, outside activity can be
easily picked up. Also, movement of window coverings should be
considered as shadows can be perceived as movement from tress
blowing in the wind.
Product Overview
Rear View
Front View
N
Pairing to the K1 Hub
This Motion Sensor needs to be paired (other than the MD-20 that
is included with the K1 System Kit) to the K1 Hub first before use.
To pair the sensor, please refer to the K1 Hub’s user manual or in
the K1 section of the smanos home app, press the "+" button and
follow the instructions on the Accessories page to easily add your
smanos MD-20 Pet Immune Motion Detector.
Detection Window
Tamper Switch
LED Indicator
;6ɑ
;6ɑ
Back Cover
(Wall Mounting Base)
Corner Mounting Bracket
N
N
N
N
LED Indicator
Blinks once: Motion detected.
Blinks once per 3 seconds: Low battery, please change the batteries.
Tamper Switch
Pet-Immune Function Illustration
;6ɑ
Anti-tamper protection ensures that any attempts to remove
the battery cover /mounting plate results in an alarm and push
notification and possible email if selected.
2m
N
N
Detection Range
2m
Top view
90°
Installation
Installation Notices
N
N
N
N
Side view
An optimum mounting placement will increase the effectiveness of
this Motion Sensor and reduce false alarms.
ON
Facing
direct sunlight
2m
N
N
Near air
conditioning /
heat sources
Facing swimming
object
Mounting
Important: Make sure the UP mark on the Back Cover is pointing up
before mounting the MD-20 on a flat surface. Once level, mount
the mounting bracket to the wall using either the double face take
or the mounting screws with mollys, both of which are included in
the package.
2-2.2 m
(6.6’-7.3’)
Mounted on wall or
corner at a height of 2-2.2
meters (6.6'-7.3') from the
floor.
The best installation placement
is when the MD-20 is facing
90°to the walking direction
or pathway of any would-be
intruders.
Notice: Removing the Back Cover will result in an alarm; you
can disarm the alarm with the KP-20 or through your K1 app
in the smanos home and then continue the installation in peace
& quiet.
Test
Set the K1 system to Test
Mode (from the K1, within
the smanos home app),
and then trigger the Motion
Sensor by pressing the
tampering switch on the
back of the sensor (MD20 mounting plate must be
removed), the K1 Hub will
sound 3 beeps to confirm
the connection and range
with K1 Hub is good.
Specifications
Model: MD-20
Power: 3V CR123A Li-Mn battery x 2 pcs
Frequency: 915MHz
Wireless range: ≤ 80 m (in open area)
Operating conditions:
0-50°C/ 32° - 122°F, humidity < 90% RH (non-condensing)
Dimensions (L x W x H): 85 x 85 x 36mm / 3.35" x 3.35" x 1.42"

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2017:05:25 20:07:14+08:00
Metadata Date                   : 2017:05:27 08:57:34+08:00
Modify Date                     : 2017:05:27 08:57:34+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Instance ID                     : uuid:ec611526-b8ff-4387-8738-d6b02fa67f4a
Original Document ID            : xmp.did:e441f3f1-1575-e944-99c7-eb82eeefc415
Document ID                     : xmp.id:28451e28-4da9-0d4a-8ba1-d3aeb9f1d07f
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:28c57d33-ff08-f04a-88af-b09a510895ec
Derived From Document ID        : xmp.did:1614fc45-0042-724a-9dc7-28450b550279
Derived From Original Document ID: xmp.did:e441f3f1-1575-e944-99c7-eb82eeefc415
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2017:05:25 20:07:14+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 5
Creator                         : Adobe InDesign CC 2014 (Windows)

EXIF Metadata provided by EXIF.tools