Chuango Security Technology SS20 SS-20 Indoor Siren User Manual

Chuango Security Technology Corporation SS-20 Indoor Siren

User Manual

SS-20Indoor SirenUSER MANUALEN DE ESFR PTNL IT© 2017 SMANOS HOLDING LTD. All Rights Reserved. Ver: SS-20-UM-ML-V1.0 Printed in China
FCC STATEMENT1. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in stalled and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--- Reorient or relocate the receiving antenna.--- Increase the separation between the equipment and receiver.--- Connect the equipment into an outlet on a circuit different  from that to which the receiver is connected.--- Consult the dealer or an experienced radio/ TV technician for help.Industry Canada NoticeThis device complies with Industry Canada licence-exempt RSS standard(s).1. Operation is subject to the following two conditions:(1) this device may not cause interference, and  (2) this device must accept any interference, including interferencethat may cause undesired operation of the device."2.Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Avis d'Industrie CanadaLe présent appareil est conforme aux CNR d'Industrie Canada applicablesaux appareils radio exempts de licence. L'exploitation est autoriséeaux deux conditions suivantes : (1) l'appareil ne doit pas produirede brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radioélectrique subi, même si le brouillage est susceptibled'en compromettre le fonctionnement. Cet appareil numérique ne dépasse pas les Rèlements sur l'interférence radio par un appareil numérique de classe B stipulées dans les Règlement sur l'interférenceredio d'industrie Canada.
IntroductionThe SS-20 Indoor Siren will go off on-site, with a loud 90dB siren sound, to deter any would-be intruders when a sensor of K1 system has been triggered It is smart to have 2-4 sirens strategically placed around the your home as it easily deters any intruder if they defeated one siren but still hear NOISE! Intruders DO NOT like attention. Also consider a smanos SS-2800 outdoor Strobe Siren for even more noise and attention with the ashing strobe.Pairing to the K1 HubThis Siren needs to be paired to the K1 Hub rst before use. To pair the Siren, please refer to the K1 Hub’s user manual or in the K1 section of the smanos home app, press the "+" button and follow the instructions on the Accessories page to easily add your smanos SS-20 siren.Product Overview Back View with mounting plate & level;6ɑTamper   LED IndicatorSwitchLED IndicatorBlinks rapidly: K1 system is alarming.Blinks once per 3 seconds: Low battery, please change the batteries.          Tampering SwitchAnti-tampering protection ensures that any attempts to remove the cover results in the alarm sounding as well as email and push notication.
InstallationThe Siren can be placed in any location as long as it is within the range with K1 Hub;6ɑSet the entire system status to Arm and then press the Tamper Switch on the backside of the SS-20 (as shown) to trigger an alarm which conrms the connectionwith K1 Hub;6ɑInstall the Siren using either the double-sided tape or the screws with mollys included in the package.Notice: Removing the Back Cover will result in triggering the   system and the siren sounding. You can disarm simply the alarm with the app or KP-20 and continue the installation.SpecicationsModel: SS-20Power: 3V CR123A Li-Mn battery x 4 pcsSound: 90 DecibelsFrequency:  915MHzWireless range: ≤ 80 m (in open area)Operating conditions: 0-50°C / 32° - 122°F, humidity < 90% RH (non-condensing)Dimensions (L x W x H): 85 x 85 x 37mm / 3.35" x 3.35" x 1.46"

Navigation menu