Chung Hsin Electric and Machinery Mfg AVS-5801T 5.8 GHz Audio/Video Sender User Manual AVS 5800B D111 manual modified960628

Chung-Hsin Electric & Machinery Mfg. corp. 5.8 GHz Audio/Video Sender AVS 5800B D111 manual modified960628

Users manual

Download: Chung Hsin Electric and Machinery Mfg AVS-5801T 5.8 GHz Audio/Video Sender User Manual AVS 5800B D111  manual modified960628
Mirror Download [FCC.gov]Chung Hsin Electric and Machinery Mfg AVS-5801T 5.8 GHz Audio/Video Sender User Manual AVS 5800B D111  manual modified960628
Document ID858023
Application IDY2jLw+6/A4vamq2pRHDxRQ==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.54kB (219213 bits)
Date Submitted2007-10-23 00:00:00
Date Available2007-10-23 00:00:00
Creation Date2007-07-12 10:13:52
Producing SoftwareAcrobat PDFWriter 5.0Windows NT ª©
Document Lastmod0000-00-00 00:00:00
Document TitleAVS-5800B_D111_ manual modified960628.doc
Document CreatorAVS-5800B(D111) manual modified960628.doc - Microsoft Word
Document Author: Administrator

Contents
1. Package Content… … … … … … … … … … … … … … … … … … 1
2. Panel Control and Function… … ...… … … … … … … … … … … 2
3. Setup Guide… … … … … … … ..… … … … … … … .… … … … … 4
Model: AVS-5801
4. Orient Transmitter/Receiver for optimal performance… … .… .5
5. Important Safety Information… .… … … … … … … … ..… ..… … 6
5.8 GHz Audio/Video Sender
1. Package Content
Check to make sure that all units shown as below are enclosed. If something
missed, please contact your dealer.
1. 5.8GHz Transmitter x 1
2.
5.8GHz Receiver x 1
UHF: 433.92MHz (European)
UHF: 418MHz (USA Standard)
3. IR Mouse x 1 / fasten strips x 2
4. Accessories
2507V58RL01B
European Standard:
1.
(1) Power Adapters (230V) x 2
(2) RCA to Scart cable x 2
– Channel selection switch to find optimal reception, the transmitter and
receiver must to be Configured as the same channel.
2A –Remote control LED sends IR rays, to remotely control the source AV
equipment.
2B –Remote control LED receives IR rays from remote controller.
USA Standard
3A – Directional 5.8GHz A/V antenna sends A/V signal from source
(1) Power Adapters (120V) x 2
(2) RCA Cable x 2
equipment.
3B – Directional 5.8GHz A/V antenna receives audio and video signal.
4 – Power on/off switch.
5 – DC power input, connect to power supply. (9v).
6 – IR Mouse output, to remotely control source AV equipment.
2. Panel Control and Function
7A –Video Jack, (yellow), input from source AV equipment.
7B –Video Jack, (yellow), output to TV.
8A –Audio Jack, Right (red), input from source AV equipment.
8B –Audio Jack, Right (red), output to TV.
9A –Audio Jack, Left (white), input from source AV equipment.
9B –Audio Jack, Left (white), output to TV.
10 –Power LED.
3. Setup Guide
4. Orient Transmitter/Receiver for optimal performance
To enjoy a life of wireless video and audio, just connect the transmitter to any
For optimal performance, both the audio/video and remote control antennas
A/V source you like and connect the receiver to a TV, monitor or speaker in
should be carefully oriented as described below. For maximum transmitting
another location.
NOTE: Make sure the ON/OFF switch is in the 「OFF」position before connection
range, try to minimize obstacles (e.g. your TV or other electronics, large
furniture) where between the transmitter and receiver.
□ Transmitter
1. Connect one end of the RCA cable (or
Orients the 5.8GHz A/V Antennas
scart cable) to the audio and video jacks,
The system delivers high-quality audio and
and connect the other end to a source
video by using directional antennas, which must
device via its “AV output”.
be oriented in the best ways. The antennas are
2. Connect the DC plug of the adapter to the
DC jack, and connect the power supply to
designed to be able to vertically and horizontally
pivot and rotate in almost any direction.
an outlet.
3. Fix IR mouse next to or in front of IR
In most situations, the flat-pitted face of the antennas on both the transmitter
sensor of source device, or alternatively
and receiver should be facing one another and perpendicular (at a right angle)
have transmitter facing directly toward the
to an imaginary line drawn between the two units. Three examples are shown
source device.
as Fig-1, Fig-2 and Fig-3. Since all homes are different, for optimal reception,
additional slight pivots or rotations may be necessary. If the transmitter and
□ Receiver
receiver are less than 10 feet apart, suggest that the antennas are lying on their
casings since the distance is so short.
Connect one end of the RCA cable (or
scart cable) to the audio and video jacks
and connect the other end to a TV (or
monitor, speakers) via its “AV input”.
Connect the DC plug of the adapter to
the DC jack, and connect the power
supply to an outlet.
3.
Keep the IR window oriented toward front when using your source device remote
controller.
5. Important Safety Information
To prevent fire or shock hazard, do not expose this product to rain and
moisture. For example: do not use near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or nearby a swimming pool. To avoid electric
shock, do not take apart this product, provided as an accessory. This product
should be operated only under power supply. Do not overload wall outlets and
extension outlets as this can result in the risk of fire or electric shock.
□ NOTE:
This equipment has been tested and found to comply with the limits regulated
by FCC and CE. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference
to radio communications. The change or modifications no expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment. To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device exceeding the
RF exposure requirements and void user’s authority to operate the device.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 4
Creator                         : AVS-5800B(D111) manual modified960628.doc - Microsoft Word
Create Date                     : 2007:07:12 10:13:52
Title                           : AVS-5800B_D111_ manual modified960628.doc
Author                          : Administrator
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QWTAVS-5801T

Navigation menu