Chungear Co CE10710 Ceiling Fan Remote Controller (Transmitter) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3896580
Application ID	SX4BdKB8MIawYnh7xRVAeA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.14kB (714286 bits)
Date Submitted	2018-06-21 00:00:00
Date Available	2018-06-21 00:00:00
Creation Date	2018-06-06 09:59:29
Producing Software	Microsoft: Print To PDF
Document Lastmod	2018-06-06 09:59:29
Document Title	User Manual
Document Author:	RD1-Assistant

Model # TR190C+JY1055(with light function)
DC POWER CEILING FAN REMOTE CONTROL MANUAL
□INSTALLATION INSTRUCTIONS
NOTE: This unit is to be used for the control of DC power ceiling
fan and in an AC120V 60Hz power supply only. Output Power:
40W (Max.) for motor and 30W (Max.) for LED light.
Important: Using a full range dimmer switch (not included) to
control fan speed will damage the fan. To reduce the risk of fire or
electrical shock, do not use a full range dimmer switch to control
fan speed.
1. Switch power off at fuse box or circuit breaker before you
begin installing the fan.
2. Make wiring connections as indicated Fig. 1.
3. Launch distance for remote control: about 10m.
4. The remote code setting process:
Fig. 1
Step: 1 Open the remote battery cover and install DC12V,A23 1pc
alkaline battery, with the fan power off. (Fig. 2)
Step: 2. Within 30 seconds of restring power to the fan, you must use a
ball pen or tool to press “Learn” button about 2 seconds. Once the
receiver has detected the frequency, the ceiling fan light will turn on, then off.
Fig. 2
This will indicate the receiver has learned the frequency that was previously
selected on the transmitter.
Note: After the AC power is on, do not press any other button on the transmitter before setting learning. Doing so
will cause the procedure to fail.
After completing the steps above, you should be able to operate the ceiling fan and light. If the fan is not
responding to the transmitter, please turn the power off to the receiver. And repeat step 2.
If you want to clear before learned transmitter, hold the “Learn” button about 12 seconds. The ceiling fan light will
flash twice.
□FUCNCTIONS OF REMOTE CONTROL: (Fig. 3)
The receiver will make bi sound when light is dim for the brightness or darkness
level.
TR190C
When the battery is low power, press any button and LED light would be flash about 2 seconds. Please change
and use new battery.
To assure continued FCC compliance:
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority
to operate the equipment.
FCC ID：KUJCE10710
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (46 0 obj) not found at 712978

EXIF Metadata provided by EXIF.tools