Chunghsin Technology Group 4108 65inch UHD DLED TV User Manual
Chunghsin Technology Group CO.,LTD 65inch UHD DLED TV
Contents
- 1. Users Manual-1
- 2. User Manual-2
Users Manual-1
USERâS MANUAL
MANUEL DE LâUTILISATEUR
MANUAL DEL USUARIO
WE65HN4108
CONTENTS
Important Safety Instructions
Safety Information
Preparation
What's Included
Rear View
Installing the Stand
Removing the Stand for Wall-Mounting
Wall-Mounting Screws
Remote Control
Connecting External Devices
Customizing TV Settings
10
Initial Setup
Streaming
My Media
Viewing Photos
Listening to Music
Watching Videos
TV Settings
General
Picture
Audio
Network
Channel
Time
Lock
APP settings
Source
Parental Control
21
Troubleshooting
23
Maintaining
24
25
OTT APP Service
26
En
IMPORTANT SAFETY INSTRUCTIONS
t Read these instructions â All the safety and
operating instructions should be read before this
product is operated.
t Keep these instructions â The safety and
operating instructions should be retained for future
reference.
t Heed all warnings â All warnings on the
appliance and in the operating instructions should
be adhered to.
t Follow all instructions â All operating and use
instructions should be followed.
t Do not use this apparatus near water â The
appliance should not be used near water or
moisture â for example, in a wet basement or near
a swimming pool, and the like.
Clean only with dry cloth.
t Do not block any ventilation openings. Install in
accordance with the manufacturerâs instructions.
t Do not install near any heat sources such
as radiators, heat registers, stoves, or other
t Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A groundingtype plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
replacement of the obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
the manufacturer.
Use only with the cart, stand, tripod, bracket, or
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Please keep the unit in a well-ventilated
environment.
En
WARNING:
shock, do not expose this apparatus to rain or
moisture. The apparatus should not be exposed to
as vases should not be placed on apparatus.
WARNING: The batteries shall not be exposed to
WARNING: The mains plug is used as disconnect
device, the disconnect device shall remain readily
operable.
WARNING: To reduce the risk of electric shock, do
not remove cover (or back) as there are no userpersonnel.
within an equilateral triangle is intended to
alert the user to the presence of non-insulated
âdangerous voltageâ within the productâs
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance instructions in the literature
accompanying the appliance.
This equipment is a Class II or double
insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.
This product contains electrical or electronic
materials. The presence of these materials
may,if not disposed of properly, have potential
adverse effects on the environment and
human health.
Presence of this label on the product means it
should not be disposed of as unsorted
waste and must be collectedseparately. As a
consumer, you are responsible for ensuring
that this product is disposed of properly.
SAFETY INFORMATION
To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this
user guide, especially the safety information below.
Electrical Safety
The TV set should only be connected to a main power supply with voltage that matches the label at the
rear of the product.
To prevent overload, do not share the same power supply socket with too many other electronic
components.
Do not place any connecting wires where they may be stepped on or tripped over.
Do not place heavy items on any connecting wire, which may damage the wire.
Hold the main plug, not the wires, when removing from a socket.
During a thunderstorm or when not in using the television for long periods, turn off the power switch on
the back of the television.
Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such
as bathrooms, steamy kitchens or near swimming pools.
Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid
is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally
penetrates the ventilation slots or if the TV set does not work normally.
Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit
this apparatus.
To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long
period, or when the batteries are exhausted.
For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.
Install only new batteries of the same type in your product.
Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the
life of the batteries or cause batteries to leak.
Do not mix old and new batteries.
Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal
Hydride) batteries.
Batteries should be recycled or disposed of as per state and local guidelines.
Do not attempt to recharge disposable batteries.
Do not short circuit battery terminals.
Keep away from children.
Physical Safety
Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least
5cm (2ââ) clearance all around.
Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the
remote control.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding prong, the
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs.
Unplug the apparatus during lightning storms or when unused for long periods.
s required if the apparatus does not operate
normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way.
Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when the
apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.
Always connect your television to a power outlet with protective ground connection.
ation.
The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
d on the apparatus.
Attention should be drawn to the environmental aspects of battery disposal.
En
PREPARATION
What's Included
TV Set
Remote Control with Batteries
TV Stand
Four Screws M4x24
User Manual
User Manual
En
Quick
Connect
Guide
Quick Connect Guide
Warranty
Card
Warranty Card
PREPARATION
Rear View
LED
IR
t VOL
Press to adjust the volume.
t CH
Press to select a channel.
POWER
Switch the TV between On and Standby mode.
POWER Indicator
Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode.
IR (Infrared Receiver)
Receive IR signals from the remote control.
En
PREPARATION
Rear View
HEADPHONE
10
LAN
HDMI 2
HDMI 1
VGA
1. Power Cord
Connect to AC power outlet.
2. OPTICAL Output
Connect a digital sound system to this
jack.
3. USB Port
Connect to a USB storage device to play compatible movie and photo
4. LAN
Network connection port.
5. HDMI Input
Connect to a
(HD) signal input device.
6. VGA Input
Connect to a computer or other devices with a VGA interface.
7. PC AUDIO Input
Connect to a computer audio output.
8. DTV/TV Input
Connect to the antenna VHF/UHF) socket with the RF coaxial cable.
9. Headphone Socket
Connect to the Headphones.
10. AUDIO Input
Connect to the AUDIO (L/R) output sockets on external audio devices.
11. COMPOSITE/COMPONENT IN
Connect to AV devices with composite/component (Y/Pb/Pr) video and audio output sockets.
COMPOSITE VIDEO and COMPONENT(Y/PB/PR) share with AUDIO IN (L/R).
En
PREPARATION
Installing the Stand
t 1. Lay the TV face down on a flat,
cushioned surface to avoid damaging
or scratching.
t 2. Fix the Left Base Stand to the main
unit using 2 pcs provided screws.
( M4x24)
t 3. Fix the Right Base Stand to the
main unit using 2 pcs provided screws.
( M4x24)
Removing the Stand for Wall-Mounting
t 1.Lay the TV face down on a flat,
cushioned surface to avoid damaging
or scratching.
t 2.Untighten the 4 pcs screws holding
the stand assembly and remove them.
t 3.Attach the wall-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.
Wall-Mounting Screws
Mount the VESA bracket using 4*M8*10 isometric threaded screws (not included).
WARNING:
with the installation instruction.
WARNINGďź
Never place a television set in an unstable location. A television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be acoided by taking simple precautions such as:
-Using cabinets or stands recommended by the manufacturer of the television set.
-Only using furniture that can safely support the television set.
-Ensuring the television set is not overhanging the edge of the supporting furniture.
-Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.
-Not placing the television set on cloth or other materials that may be located between the television
set and supporting furniture.
-Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be
applied.
En
PREPARATION
Remote Control
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
En
: Switch the TV between On and Standby
mode.
: Mute and restore TV sound.
0~9: Select a program.(ATV/DTV mode)
: Enter multiple program channel number
such as 2-1.
: Return to the previous viewing channel.
APP: Press to select the desired APP.
MENU: Display the main menu.
SOURCE: Select among the different input
signal sources:TV/HDMI1/HDMI2/HDMI3/USB/
VGA/AV/Component.
: Allows you to navigate the on
screen display menus and adjust the system
settings to your preference.
OK:
RETURN: Return to previous menu.
EXIT: Exit the on screen display menu.
ASPECT: Select the aspect ratio
settings:standard/wide/wide zoom/zoom.
VOL+/-: Adjust the volume.
CH / : Select the channel.
TV: Press to turn to TV mode.
: Start playback or pause.
: Reverse playback rapidly.
: Advance playback rapidly.
: Skip to the beginning of the previous
chapter/track/photo.
: Skip to the beginning of the next chapter/
track/photo.
: Stop the playback.
INFO: Display the present screen information
such as the current channel and input source.
FREEZE: Freeze the picture.
FAV: Display the favorite channel list.
ADD/ERASE: Add or delete Favorite channels.
V-CHIP: Set up parental control.
CC: Closed Caption selection: ON/OFF/CC On
Mute.
MTS: Switch among different audio channels:
STEREO/MONO/SAP.
P.MODE: Select picture mode: dynamic/movie/
user/standard.
CH.LIST: Display program list.
S.MODE: Select sound mode: standard/music/
movie/user.
CONNECTING EXTERNAL DEVICES
HEADPHONE
Soundbar
LAN
HDMI 2
HDMI 1
VGA
En
CUSTOMIZING TV SETTINGS
Initial Setup
Connect the power cord to the power socket after you have completed all the physical
connections. At this stage, the TV will enter Standby Mode and the red LED indicator will
illuminate.
button on the main unit or on the remote control to turn the TV
In Standby Mode, press the
on. The red LED indicator will turn blue.
the Arrow buttons to
highlight and select your desired mode and press OK
Westinghouse
If channels cannot be
found, this frame will be
displayed automatically.
En
10
CUSTOMIZING TV SETTINGS
STREAMING
Press MENU to display the main interface, then use the Arrow buttons to highlight
STREAMING and press OK
and select desired apps to enter.
NETFLIX
Enjoys TV shows & movies streamed instantly over the Internet.
YouTube
YouTube your way on the best screen in your house.
VUDU
Pandora
AccuWeather
Discover, watch and collect the latest movies and TV shows in
high quality 1080p. Free to sign up. No subscriptions, late fees or
commitments.
Free personalized radio that offers effortless and endless music
enjoyment and discovery. Just start with the name of one of your
favorite artists, songs, genres or composers and Pandora will do the
rest. Itâs easy to create personalized stations that play only music
youâll love
Displays the current weather conditions and the temperature
anywhere in the world in centigrade or Fahrenheit.
To obtain the best result to watching the 4k video on your 4K TV:
1. you need a high-speed internet connection and make sure your network bandwidth meets
the 4k content provider's requirement.
2. access to the real 4K media; only 4K media can show the best image on 4K TV, FHD/1080p
media not as detailed as 4K media.
En
11
CUSTOMIZING TV SETTINGS
MY MEDIA
Press MENU button to display the main interface, then use the Arrow buttons to highlight MY
MEDIA and press OK
like.
Note: Portable drives should be inserted before entering MY MEDIA menu.
En
12
CUSTOMIZING TV SETTINGS
VIEWING PHOTOS
Use the Arrow buttons to highlight the PHOTO option
and press OK
drive, press OK to enter.
After entering PHOTO, use the Arrow buttons to select
OK to enter.
Directories:10
Files:0
Total:10
select the desired picture, then press the playing button
to display.
Directories:10
Files:0
Total:10
When the picture is playing, the picture Function Bar
will be displayed. Use the Arrow buttons to select the
desired function available on the bar.
LISTENING TO MUSIC
Use the Arrow buttons to highlight the MUSIC option
and press OK, then it will jump to confirm the inserted
drive, press OK to enter.
After entering MUSIC, use the Arrow buttons to select
the music file and press OK to enter.
Directories:10
Files:0
Total:10
After entering the music file, use the Arrow buttons
to select the desired music, then press the playing
button to display.
Directories:10
Files:0
Total:10
When the music is playing, the music Function Bar
will be displayed. Use the Arrow buttons to select the
desired function available on the bar.
En
13
CUSTOMIZING TV SETTINGS
WATCHING VIDEOS
Use the Arrow buttons to highlight the VIDEO option and
press OK
press OK to enter.
After entering VIDEO, use the Arrow buttons to select
OK to enter.
Directories:10
Files:0
Total:10
select the desired video, then press the playing button to
display.
Directories:10
Files:0
Total:10
When the video is playing, the video Function Bar will be
displayed. Use the Arrow buttons to select the desired
function available on the bar.
TV SETTINGS
Press the MENU button on the main unit or on the remote control to display the main interface.
Then use the Arrow buttons to highlight TV Settings and press OK to enter. Then use the
Arrow buttons to cycle among the following options and select the desired one to enter.
En
14
CUSTOMIZING TV SETTINGS
GENERAL
Press MENU to display the main interface, use the
Arrow buttons to highlight TV SETTINGS and press
OK
GENERAL to enter and adjust each option setting.
WIDE
MENU LANGUAGE
TRANSPARENCY
ZOOM MODE
VGA SETTINGS
CLOSED CAPTION
View End-User License
Software Update(Network)
Software Information
Select the menu language among
English, Français or Espaùol. The
default on-screen menu language is
English.
Select to turn On/Off transparency
function.
Select zoom mode:
Wide/Wide Zoom/Zoom/Just Scan/
Standard/Dot by Dot.
Note: With a different input source,
the zoom mode options may differ.
Adjust advanced optionâs setting:
H-POS, V-POS, Clock, Phase or Auto.
(only available in VGA mode)
CC mode On/Off/CC on Mute.
Basic
CC1/CC2/CC3 CC4/
Selection Text1/.../Text4/OFF.
Advanced Select from Service 1 to
Selection Service 6.
Mode, Font Style, Font
Size, Font Edge Style,
Option
Font Edge Color, FG_
Color, BG_Color, FG_
Opacity, BG_Opacity.
HDMI EDID: Select the HDMI version:
Mode 1(HDMI 1.4)/Mode 2(HDMI 2.0).
Inlink: Set the options: Inlink Control,
OTHER SETTINGS
Device Power Off, TV Power On,
Audio Receive, Inlink Device List,
Root Menu.
Restore the TV to factory default
RESTORE DEFAULT
settings.
SOFTWARE
UPDATE (USB)
Software Update In the case of a
USB device.
VIEW END-USER
LINCENSE
Choose "I have read the user
agreement" to select Accept or
Decline .
SOFTWARE
UPDATE
(NETWORK)
Software Update In the case of a
NETWORK device.
SOFTWARE
INFORMATION
Check Module Software Version
NetReady Device ID.
En
15
CUSTOMIZING TV SETTINGS
PICTURE
Press MENU to display the main interface, use the Arrow
buttons to highlight TV SETTINGS and press OK to
PICTURE
to enter and adjust each option setting.
PICTURE MODE
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TINT
COLOR
TEMPERATURE
ADVANCED
OPTION
OPEN HDR
AUTO
OPEN HDR
En
16
Cycle among picture modes:
Dynamic/Standard/Movie/User.
Increase or decrease the amount of white in
the picture.
Adjust the difference between light and dark
levels in the pictures.
Control the color intensity.
Adjust crispness level in edges between light
and dark areas of the picture.
Adjust the balance between red and green levels.
Cycle among color temperatures: Normal/
Warm/Cool.
Set the following options:
Noise Reduction: Reduce the noise level of
the connected device: Off/Weak/Middle/Strong.
White Balance: Set the different options of
white balance.
Backlight: Set the value of backlight.
Cycle among picture modes:
OFF/AUTO/LOW/MIDDLE/HIGH.
CUSTOMIZING TV SETTINGS
AUDIO
Press MENU to display the main interface, use the
Arrow buttons to highlight TV SETTINGS and press OK
AUDIO
to enter and adjust each option setting.
Allow the selection of an audioenhancement technique: Standard/
Music/Movie/User.
Control the relative intensity of lowerBASS
pitched sounds.
Control the relative intensity of higherTREBLE
pitched sounds.
Adjust the relative volume of the
BALANCE
speaker in a multiple speaker system.
DIGITAL AUDIO
Select the digital audio output mode
OUTPUT
between PCM/RAW.
Turn On/Off to provide an enhanced
SURROUND SOUND
listening experience.
Turn On/Off to automatically control
AUTO VOLUME
volume levels.
Select audio language among:
AUDIO LANGUAGE
English, French, Spanish.
SOUND MODE
OFF
AUTO VOLUME
NETWORK
Press MENU to display the main interface, use the
Arrow buttons to highlight TV SETTINGS and press
OK
NETWORK to enter and adjust each option setting.
NOT CONNECT
NETWORK TYPE
MY NETWORK
IP ADDRESS
Select Wired and Wireless network, then
connect the TV to the wired network or
search the wireless network through
Display the current network which you
connect to.
Display the current IP address
information.
En
17
CUSTOMIZING TV SETTINGS
CHANNEL
Press MENU to display the main interface, use the
Arrow buttons to highlight TV SETTINGS and press
OK
CHANNEL to enter and adjust each option setting.
AIR/CABLE
AUTO SCAN
FAVORITE
SHOW/HIDE
CHANNEL NUMBER
CHANNEL LABEL
En
18
Select antenna between Air and
Cable.
Select the Auto Scan feature to scan
your available cable channels.
Set the selected channel as a favorite
channel.
Show/Hide the selected channel.
Display the current channel number.
Display the current channel label.
CUSTOMIZING TV SETTINGS
TIME
Press MENU to display the main interface, use the
Arrow buttons to highlight TV SETTINGS and press OK
TIME to
enter and adjust each option setting.
SLEEP TIMER
OSD TIMER
Select a period of time after which the
TV automatically switches to standby
mode:
Off/5/10/âŚ/180/240 min.
Alternative: You may press the SLEEP
button repeatedly to select the number
of minutes directly.
Set the OSD timer:
Off/15s/30s/60s/120s/240s.
Select a Time Zone:
TIME ZONE
Central/Mountain/Newfoundland.
DAYLIGHT SAVING Select to turn daylight saving time On/
TIME
Off.
LOCK
Press MENU to display the main interface, use the
Arrow buttons to highlight TV SETTINGS and press OK
LOCK
to enter and adjust each option setting.
Note: the default password is "0000".
CHANGE
PASSWORD
SYSTEM LOCK
USA
CANADA
RRT SETTING
RESET RRT
CLEAR LOCK
Use 0-9 buttons to input the old password
and then input the new 4-digit password.
Select to turn system lock On/Off. The
following options (USA, Canada, RRT Setting
and Reset RRT) will only be accessible when
you turn the system lock on.
TV Rating: Press OK button to
TV
lock or unlock TV rating.
Set the MPAA: N/A, G, PG, PGMPAA
13,R, NC-17, X.
Select MPAA rating for EnglishCanada
speaking Canada : E, C, C8+, G,
English
PG, 14+, 18+.
Select MPAA rating for Quebec
Canada
Canada : E, G, 8 ans+, 13 ans+,
French
16 ans+, 18 ans+.
Set Rating Region Table.
Select to reset the RRT setting.
Clear all lock settings.
En
19
CUSTOMIZING TV SETTINGS
APP SETTINGS
Press MENU to display the main interface, use the
Arrow buttons to highlight TV SETTINGS and press OK
APP
SETTINGS to enter and adjust each option setting.
DEACTIVATE APP
Exception while opening/reading file.
4.3.4.eab833d.2017072610.2017-08-23
NETFLIX VERSION
information.
Deactivate Vudu and clear the account
DEACTIVATE APP
information.
ESN
Electronic Serial Number.
NETFLIX
VERSION
Show Netflix Version.
SOURCE
Press SOURCE on the remote control or on the main unit to display the source
menu, then use the Arrow buttons to cycle among the different input sources: TV/AV/
COMPONENT/HDMI1/HDMI2/HDMI3/VGA/USB, then use the Arrow buttons to highlight
the desired source and press OK to confirm.
En
20
PARENTAL CONTROL
Press the MENU button on the main unit or on the remote control and then press buttons
to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK
menu. If used, this option feature can "block'' undesirable programming from appearing on
the TV.
Parental Control offers users a wide variety of options and settings that restrict or "block''
program rating they consider acceptable for a younger more sensitive viewer. It can be
General audience and children block should both be programmed into the TV memory.
both rating systems should be used and based on the ages of children.
Overview
To ensure complete coverage for all TV programs (movies and regular TV show) using the
Age Block option, choose a rating from both the MPAA and TV Parental Guideline tables on
the next page. In addition, you may wish to add other restrictions selected from the content
block menu and submenus.
Things to Consider before Setting up Parental Control
Determine which ratings you consider are acceptable for different viewers. For example, if
you choose TV-PG, more restrictive ratings will be automatically blocked; some viewers will
not be able to see: TV-PG, TV-14, or TV-MA rated programs. You may block the auxiliary
video source entirely.
Use the Content Blk option to block program Content based on individual parameters such
as: Strong Dialog, Bad Language, Sex Scenes, Violence Scenes or Fantasy.
Go into the Set Password option and use the numeric keys on the remote control to set a
secret password, then save the password, it is the only way to access the Parental Control
menu and change ratings setting, or turn off Parental Control.
You can set different Parental Control viewing restrictions for general audiences and for
children; both can be active at the same time;
Simply specifying one content block such as Sex Scenes, will not automatically restrict
the programming that appears from the video sources;
Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will
automatically restrict the programming that appears from the video sources;
You cannot disable Parental Control by disconnecting the TV from power. Block hours will
En
21
PARENTAL CONTROL
t Motion Picture Association of America (MPAA) Rating System
PG
Grade
General Audiences
Parental Guidance
Suggested
PG-13
Parents Strongly
Cautioned
Restricted
NC-17
No Rating
No children under
age 17
Hard Core Films
No Rating
Meaning
Content not offensive to most viewers.
Content is such that parents may not want their
children to view the program.
Program is inappropriate for preteens, with a greater
degree of offensive material suggested than a PG
rated program.
Not for children under 17-contains strong element of
sex and/or violence.
Not for children under 17-under any circumstances.
Contains strong sexual content.
Same as NC-17 rating.
MPAA did not rate.
t TV Parental Guideline Rating System
Select LOCK option in the TV Settings, then use the
Arrow buttons to highlight USA and press OK button to
enter. Select TV to enter set TV parental guideline rating
system.
Grade
TV-Y
All Children
TV-Y7
Directed to Older
Children
TV-G
General Audience
TV-PG
Parental Guidance
Suggested
TV-14
Parents Strongly
Cautioned
TV-MA
Mature Audience
Only
Meaning
Content not offensive to
most viewers.
Considered suitable for
children over 7- may
contain fantasy violence
scenes.
Considered suitable for all
audience; children may
watch unattended.
Suggested unsuitable
for younger childrenmay contain suggestive
language, bad language,
sex and violence scenes.
unsuitable for children
under 14 - may contain
strong language, bad
language, sex, and
violence scenes.
Adults only- may contain
strong language, bad
language, sex, and
violence scenes.
Canadian English is used throughout all English-speaking Canada (E, C, C8+, G, PG, 14+, 18+).
Canadian French is used in Quebec (E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+)
The V-Chip will automatically block certain categories that are "more restrictive". If you block TV-Y
category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the
categories in the "young adult" will be blocked (TV-G, TV-PG, TV-14 and TV-MA).
TV-NO: The channel is not locked.
En
22
TROUBLESHOOTING
If your TV does not operate normally or cannot be turned on, please check the following
troubleshooting questions. Remember also to check any other connected electronic device,
such as a DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate
normally, please contact technical support.
The TV does not operate properly
The TV may freeze up during use. Disconnect the power cord from
the power socket for a few minutes. Reconnect the power cord and
try to operate it again as usual.
Check that the TV is connected to the power supply.
TV cannot be switched on
Make sure all connected AV devices are switched off before switching
on your TV.
Check to see if there are any objects between the TV and the remote
control causing an obstruction. Ensure that you are pointing the
The remote control does not
remote control directly at the TV.
work
Ensure that the batteries are installed with the correct polarity (+ to +,
- to -).
Install new batteries.
Check the power of the TV. The power supply maybe interrupted.
Power is suddenly turned off Check if the sleep timer is set.
Check whether the Auto Standby is activated.
The TV does not respond
when pressing any buttons
The video function does not work
No picture & no sound
Picture appears slowly after
switching on
No or poor color or poor
picture
Horizontal/Vertical bar or
picture shaking
Poor reception on some
channels
Check whether the TV is switched on.
Try another channel. The problem may be caused by the broadcaster.
This is normal; the image is muted during the TV startup process.
Please contact your service centre if the picture has not appeared
after 5 minutes.
Adjust the settings in the Picture menu.
Try another channel. The problem may be caused by the broadcaster.
Check if video cables are connected properly.
Check for local interference such as an electrical appliance or power
tool.
The station or cable channel may be experiencing problems; tune to
another station.
Station signal may be weak, reposition the antenna for better
reception.
Check for sources of possible interference.
Check antenna (change the position of the antenna.)
Lines or streaks in pictures
No pictures when connecting
Check if the input source is HDMI1/HDMI2/HDMI3.
HDMI
Pictures appear in wrong
Adjust the Aspect Ratio settings in the SETUP menu or press the
ratio
ASPECT button on the remote control.
The audio function does not work
Picture OK but no sound
Press the VOL +/- buttons.
Sound muted? Press the MUTE button.
Try another channel. The problem may be caused by the broadcaster.
No output from one of the
speakers
Adjust the Balance settings in the AUDIO menu.
Unusual sound from inside
the TV
A change in ambient humidity or temperature may result in an unusual
noise when the TV is switched on or off and does not indicate a fault
with the TV.
No sound when connecting
HDMI
Audio noise
Check if the input source is HDMI1/HDMI2/HDMI3.
Keep the RF coaxial cable away from the other connected cables.
En
23
TROUBLESHOOTING
Password
Lost password
Select the SET PASSWORD setting in the LOCK menu, then enter
the following master password â8899â. The master password clears
your previous password and allows you to enter a new password.
There is a problem in PC mode
The signal is out of range
(invalid format)
Vertical bar or stripe on
background & Horizontal
Noise & Incorrect position
Screen color is unstable or
show a single color
Adjust the resolution, horizontal frequency, or vertical frequency.
Check the signal cable.
Reinstall the PC video card.
If the WIFI connection fails or APP has connection issue, please check the following
troubleshooting questions.
WIFI connection fails
Problems with video
streaming
has connection issue
Can't use Vudu and Pandora
Check signal strength for WIFI connection, the TV may be too far
away from WIFI router.
Check "authentication" setting.
Make sure password is entered with correct upper or lower case
letters.
Check if TV is connected correctly.
Try powering off and unplugging TV to reset TV.
Try resetting the WIFI router, and also check for interference or WIFI
channel problems.
Check if internet connection is fast enough for streaming HD or 4K
videos.
Vudu is only available in US and Pandora only avaliable in limited
countries.
Maintaining
Do not use your TV in areas that are too hot or too cold, because the cabinet may
warp or the screen may malfunction. Your TV works best in temperatures that are
comfortable to you.
Storage temperatures are 32° to 122°F(0° to 50°C).
Working temperatures are 32° to 95°F(0° to 35°C).
Do not place your TV in direct sunlight or near a heat source.
- the ventilation should not be impeded by covering the ventilation openings with
apparatus; items, such as newspapers, table-cloths, curtains, etc.;
-no naked flame sources,such as lighted candles,should be placed on the
apparatus;
- attention should be drawn to the environmental aspects of battery disposal.
En
24
SPECIFICATION
Panel Size
Display Type
Panel Technology
Panel 60 Hz Vs. 120 Hz
Display Resolution
HDMI Support
Panel Resolution
Aspect Ratio
Dynamic Contrast Ratio-Panel
Response Time (G To G)
Lamp Life (Typ. Hours)
Horizontal Viewing Angle (At CR>10)
Vertical Viewing Angle (At CR>10)
Wall-mount(LxW-mm)
65 inch diagonally
LED
TFT
60 Hz
3840 x 2160
3840 x 2160 60Hz
3840 x 2160
16:9
3000:1
6 ms
20,000 hours
176
176
400*200 VESA(mm)
The FCC Wants You to Know
En
25
OTT APP SERVICE
If you want to know about these APP informationor get more service. Please refer to following
content.
t
You can call the following telephone for more help: 866-579-7172
If y our m atter is r egarding c ustomer service, p lease r efer t o
alternative contact information.
f or
t YouTube
You can browse the following website for more help:
https://productforums.google.com/forum/#!categories/youtube/smart-tvs
t VUDU
You can call the following telephone for more help: 888-554-8838
t Pandora
You can send E-mail to Pandora for more help: pandora-support@pandora.com
t AccuWeather
You can send E-mail to AccuWeather for more help: CustomerService@AccuWeather.com
OBTAINING WARRANTY SERVICE
Please call Westinghouse E lectronics a t (800) 701-0680 f or t he l ocations o f the nearest
Westinghouse Electronics service center or to obtain in-home services.
En
26
CONTENU
Consignes de sĂŠcuritĂŠ importantes
Renseignements sur la sĂŠcuritĂŠ
PrĂŠparation
ĂlĂŠments compris
Vue arrière
Installation du socle
Retrait du socle en vue dâun montage mural
Vis de montage mural
TĂŠlĂŠcommande
Connexion des appareils externes
Personnalisation des paramètres du tÊlÊviseur
10
Diffusion
MES MĂDIAS
Visionnement de photos
Ăcoute de musique
Regarder des vidĂŠos
PARAMĂTRES TV
GĂŠrĂŠral
Image
Audio
RĂŠseau
Canal
Heure
Verrouillage
ParamĂŠtres de APP
Source
ContrĂ´le parental
21
DĂŠpannage
23
Entretien
24
CaractĂŠristiques technique
25
OTT APP Service
26
Fr
CONSIGNES DE SĂCURITĂ IMPORTANTES
t Lisez ces consignesâAvant dâutiliser ce produit,
vous devez lire toutes les consignes liĂŠes Ă la
sĂŠcuritĂŠ et au fonctionnement de lâappareil.
t Conservez ces consignes â Nous vous
conseillons de conserver les consignes liĂŠes Ă
sĂŠcuritĂŠ et au fonctionnement de lâappareil pour
consultation future.
t Observez toutes les mises en gardeâVous
devez suivre toutes les consignes liĂŠes au
fonctionnement et Ă lâutilisation de lâappareil.
t Suivez toutes les consignes â Vous devez suivre
toutes les consignes liĂŠes au fonctionnement et Ă
lâutilisation de lâappareil.
t Nâutilisez pas cet appareil près de lâeau â
Lâappareil ne doit pas ĂŞtre utilisĂŠ près de lâeau ou
dans un lieu humide, par exemple dans un soussol humide ou près dâune piscine et autres.
Nettoyez uniquement Ă lâaide dâun chiffon sec.
lâappareil conformĂŠment aux consignes du
fabriquant.
Nâinstallez pas lâappareil Ă proximitĂŠ dâune source
de chaleur comme un radiateur, une bouche
de chaleur, une cuisinière ou dâautres appareils
qui produisent de la chaleur (y compris les
MISE EN GARDE: pour rĂŠduire les risques dâincendie
et de choc ĂŠlectrique, nâexposez pas cet appareil Ă la
pluie ou Ă lâhumiditĂŠ. Ne lâexposez pas non plus aux
ĂŠgouttements ou aux ĂŠclaboussures. Ne placez pas
dâobjets remplis de liquide, par exemple un vase, sur
le dessus de lâappareil.
MISE EN GARDE: nâexposez pas les piles Ă une
chaleur excessive comme celle induite par la lumière
du soleil, un feu ou autrement.
MISE EN GARDE: la prise secteur sert de dispositif
de dĂŠsaccouplage; elle doit demeurer facilement
accessible.
MISE EN GARDE: AFIN DE RĂDUIRE LES
RISQUES DâĂLECTROCUTION, RETIREZ PAS
LE COUVERCLE (OU LE PANNEAU ARRIĂRE),
CAR IL NâY A AUCUNE PIĂCE RĂPARABLE PAR
LâUTILISATEUR Ă LâINTĂRIEUR. CONFIEZ LES
RĂPARATIONS Ă UN TECHNICIEN QUALIFIĂ.
Ne contournez pas le dispositif de sĂŠcuritĂŠ de la
Le symbole reprĂŠsentant un ĂŠclair terminĂŠ
mise Ă la terre comporte deux lames, en plus
dâune broche de masse. La lame plus large ou la
broche de masse vise Ă assurer votre sĂŠcuritĂŠ. Si
prise, adressez-vous Ă un ĂŠlectricien pour faire
remplacer la prise, qui est probablement dÊsuète.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Placez le cordon dâalimentation de sorte
quâil ne risque pas dâĂŞtre piĂŠtinĂŠ ou coincĂŠ,
prise de courant, ainsi quâau point de sortie de
lâappareil.
recommandĂŠs par le fabricant.
Utilisez lâappareil uniquement avec le chariot de
manutention, le support, le trĂŠpied ou la table
recommandĂŠ par le fabricant ou vendu avec
lâappareil. Si vous utilisez un chariot, dĂŠplacez- le
vous blesser.
DĂŠbranchez lâappareil en cas dâorage ou lorsquâil
reste inutilisĂŠ pendant une pĂŠriode prolongĂŠe.
Une rĂŠparation est nĂŠcessaire si lâappareil a
ĂŠtĂŠ endommagĂŠ dâune manière ou dâune autre,
par exemple lorsque le cordon dâalimentation
renversĂŠ sur lâappareil, ou si des objets sont
tombĂŠs sur celui-ci, l'appareil a ĂŠtĂŠ exposĂŠ Ă la
pluie ou Ă l'humiditĂŠ, sâil fonctionne mal ou sâil est
tombĂŠ. Please keep the unit in a well-ventilated
environment.
Veuillez installer lâappareil Ă un endroit bien aĂŠrĂŠ.
Fr
ĂŠquilatĂŠral vise Ă avertir lâutilisateur du danger
de la presence dâuneÂŤtension dangereuse
ÂťprĂŠsentĂŠe pardes pièces non isolĂŠes Ă
lâintĂŠrieur de lâappareil, ĂŠventuellement
dâĂŠlectrocution.
Le symbole de point dâexclamation Ă lâintĂŠrieur
un triangle ĂŠquilatĂŠral, vise Ă informer
lâutilisateur de la prĂŠsence de consignes
de fonctionnement et de maintenance
importantes dans la documentation qui
accompagne lâappareil.
Cet ĂŠquipement est un appareil ĂŠlectrique de
classe II ou à double isolation. Il a ÊtÊ conçu
de sorte Ă ne pas nĂŠcessiter une connexion
de sĂŠcuritĂŠ mise Ă la terre.
TCe produit contient des composants
ĂŠlectriques ou ĂŠlectroniques. Sâils ne
sont pas mis auxrebuts adĂŠquatement,
ces composants pourraient nuire Ă
lâenvironnement ou Ă la santĂŠ des humains.
La prĂŠsence de cette ĂŠtiquette sur le produit
tantque dĂŠchet non triĂŠ, mais faire lâobjet dâune
collecte sĂŠlective. Comme consommateur,
vous devez vous assurer que ce produit est
mis aux rebuts de la bonne manière.
RENSEIGNEMENTS SUR LA SĂCURITĂ
les consignes de ce guide dâutilisation, et plus particulièrement les renseignements ci-dessous portant
sur la sĂŠcuritĂŠ.
SĂCURITĂ ĂLECTRIQUE
Le tĂŠlĂŠviseur ne doit ĂŞtre raccordĂŠ quâĂ lâalimentation principale, Ă une tension correspondant Ă celle
indiquĂŠe sur lâĂŠtiquette Ă lâarrière de lâappareil.
Pour ĂŠviter les surcharges, ne branchez pas plusieurs autres appareils ĂŠlectroniques sur la prise utilisĂŠe
pour le tĂŠlĂŠviseu.
Pour Êviter le piÊtinement et les chutes, ne placez pas les câbles de connexion à des endroits oÚ les
gens circulent.
Pour ĂŠviter dâendommager les câbles de connexion, ne posez pas dâobjets lourds sur ceux-ci.
he et non sur le câble.
En cas dâorage ou lorsque le tĂŠlĂŠviseur reste inutilisĂŠ pendant une pĂŠriode prolongĂŠe, fermez lâinterrupteur
dâalimentation Ă lâarrière de lâappareil.
Ăvitez de laisser de lâeau ou de lâhumiditĂŠ pĂŠnĂŠtrer Ă lâintĂŠrieur du tĂŠlĂŠviseur ou de lâadaptateur de
courant. Nâutilisez PAS lâappareil dans une pièce mouillĂŠe ou humide, comme une salle de bain ou une
cuisine pleine de vapeur, ou près dâune piscine.
DĂŠbranchez immĂŠdiatement lâappareil et demandez lâaide dâun pro
endommagĂŠ, si du liquide a ĂŠtĂŠ renversĂŠ sur le tĂŠlĂŠviseur, si celui-ci est exposĂŠ accidentellement Ă de
lâeau ou de lâhumiditĂŠ, si un objet quelconque pĂŠnètre dans les
si le tĂŠlĂŠviseur ne fonctionne pas normalement.
Laissez les couvercles de sĂŠcuritĂŠ en place. Il nây a aucune pièce rĂŠparable par lâutilisateur Ă lâintĂŠrieur. Il
est dangereux de tenter par vous-mĂŞme de rĂŠparer lâappareil; en outre, cela pourrait annuler la garantie
appareil.
Pour ĂŠviter quâelles fuient, retirez les piles de la tĂŠlĂŠcommande si vous ne lâutilisez pas pendant une
pĂŠriode prolongĂŠe ou si les piles sont ĂŠpuisĂŠes.
Nâouvrez pas les piles et ne les jetez pas au feu lorsquâelles sont ĂŠpuisĂŠes.
Pour de meilleurs rĂŠsultats , utilisez le type AAA ( exemple - alcalines , carbone - zinc , etc. ) batteries.
Installez uniquement des piles neuves du mĂŞme type dans votre produit.
Le dĂŠfaut d'insĂŠrer les piles en respectant la polaritĂŠ , comme indiquĂŠ dans le compartiment de la
batterie , peut raccourcir la durĂŠe de vie des batteries ou piles risqueraient de fuir.
Ne pas mĂŠlanger piles neuves et anciennes.
Ne pas mĂŠlanger des piles alcalines , standard ( carbone - zinc) ou rechargeables ( nickel-cadmium ) ou (
nickel mĂŠtal hydrure ) rechargeables.
Les batteries doivent ĂŞtre recyclĂŠes ou ĂŠliminĂŠes conformĂŠment aux lignes directrices nationales et
locales.
Ne tentez pas de recharger les piles jetables.
Ne pas les bornes de la batterie en court-circuit.
Gardez loin des enfant.
SĂCURITĂ PHYSIQUE
e. Vous pouvez placer le tĂŠlĂŠviseur dans
un meuble, mais assurez-vous de . laisser un espace de dĂŠgagement dâau moins 5 cm (2 po) tout
autour.
Ne tapez sur lâĂŠcran du tĂŠlĂŠviseur et ne le secouez pas; vous risqueriez dâendommager les circuits Ă
lâintĂŠrieur. Prenez bien soin de la tĂŠlĂŠcommande.
Pour nettoyer le tĂŠlĂŠviseur, utilisez un chiffon doux sec. Nâutilisez pas de solvants, ni de liquides Ă base
de pĂŠtrole.
Nâinstallez pas lâappareil Ă proximitĂŠ dâune source de chaleur comme un radiateur, une bouche de
terre comporte deux lames, en plus dâune broche de masse. La lame plus large ou la broche de masse
patible avec votre prise, adressez-vous Ă
un Êlectricien pour faire remplacer la prise, qui est probablement dÊsuète.
Placez le cordon dâalimentation de sorte quâil ne risque pas dâĂŞtre piĂŠtinĂŠ ou coincĂŠ, particulièrement au
DĂŠbranchez l'appareil lors des orages ou inutilisĂŠs pendant de longues pĂŠriodes.
est nĂŠcessaire si lâappareil fonctionne
mal ou sâil a ĂŠtĂŠ endommagĂŠ dâune manière ou dâune autre (y compris le cordon dâalimentation ou la
Une rĂŠparation est aussi nĂŠcessaire lorsquâun liquide a ĂŠtĂŠ renversĂŠ sur lâappareil ou que des objets sont
tombĂŠs sur celui-ci, si lâappareil a ĂŠtĂŠ exposĂŠ Ă la pluie ou Ă lâhumiditĂŠ, ou sâil est tombĂŠ.
5cm distances minimales autour de l'appareil pour une ventilati
La ventilation ne doit pas ĂŞtre empĂŞchĂŠe en couvrant les ouvertures de ventilation avec des objets tels
que des journaux, nappes, rideaux, etc.
No hay fuente de llamas, como una vela encendida, se deben colocar sobre el aparato.
L'attention doit ĂŞtre attirĂŠe sur les aspects environnementaux de l'ĂŠlimination de la batterie.
Fr
PRĂPARATION
ĂlĂŠments compris
TĂŠlĂŠcommande et piles
Poste de tĂŠlĂŠvision
Four Vis (M4x24)
Socle de tĂŠlĂŠvision
Manuel
dâutilisation
Manuel dâutilisation
Fr
Guide de
Connexion
Rapide
Guide de Connexion
Rapide
Garantie
Carte
Garantie Carte
PRĂPARATION
7VFBSSJâSF
LED
IR
t VOL
Appuyez sur cette touche pour rĂŠgler le volume.
t $)
Appuyez sur cette touche pour choisir un canal.
POWER
Pour faire basculer le tĂŠlĂŠviseur entre les modes Sous tension et Veille.
5¤NPJOEFNJTFTPVTUFOTJPO
ApparaĂŽt en bleu lorsque le tĂŠlĂŠviseur est allumĂŠ. ApparaĂŽt en rouge lorsque le tĂŠlĂŠviseur
est en mode veille.
IR (RĂŠcepteur infrarouge)
Reçoit les signaux IR de la tÊlÊcommande.
Fr
PRĂPARATION
Vue arrière
HEADPHONE
10
LAN
HDMI 2
HDMI 1
VGA
1. Cordon dâalimentation
Se branche dans une prise de courant c.a.
2. OPTIQUE
Pour connecter un système de son numÊrique à cette prise.
3. Port USB
compatibles.
4. LAN
Le port de connexion de rĂŠseau.
5. EntrĂŠes HDMI
6. EntrĂŠe VGA
Se raccorde Ă un ordinateur ou Ă dâautres appareils dotĂŠs dâune interface VGA.
7. EntrĂŠe PC AUDIO
Se raccorde Ă la sortie audio dâun ordinateur.
8. EntrĂŠe DTV/TV
HF/UHF) Ă lâaide du câle coaxial RF.
9. Prise pour ĂŠcouteurs
Se raccorde aux ĂŠcouteurs.
10. EntrĂŠe Audio
Se raccorde Ă la prise AUDIO (L / R) de connecteurs de sortie des appareils audio
externes.
11. COMPOSITE/COMPOSANT IN
Se raccorde aux appareils AV avec prises de sortie vidĂŠo et audio pour composite/composants (Y/Pb/
Pr). La vidĂŠo composite/ composante(Y/PB/PR) partage avec lâentrĂŠe audio (D/G).
Fr
PRĂPARATION
Installation du socle
t 1. Couchez le tĂŠlĂŠviseur face vers le bas
sur une surface plate et coussinĂŠe pour
ĂŠviter de lâendommager ou de rayer lâĂŠcran.
t 2. Fixez le support de stand gauche Ă l'unitĂŠ
principale en utilisant les 2 vis fournies .
( M4x24)
t 3. Fixez le support de stand droite Ă l'unitĂŠ
principale en utilisant les 2 vis fournies .
( M4x24)
Retrait du socle en vue dâun montage mural
t 1. Couchez le tĂŠlĂŠviseur face vers le bas
sur une surface plate et coussinĂŠe pour
ĂŠviter de lâendommager ou de rayer lâĂŠcran.
t 2. Desserrez les 4 vis en tenant le socle,
puis retirez-les.
t 3. Fixez le support mural au tĂŠlĂŠviseur en
utilisant les trous de fixation Ă lâarrière du
tĂŠlĂŠviseur. Installez ce tĂŠlĂŠviseur en suivant
les consignes comprises avec le support
mural.
Vis Montage mural
4*M8*10
MISE EN GARDEďź
les instructions d'installation.
MISE EN GARDE:
Ne jamais placer un tĂŠlĂŠviseur dans un endroit instable.Un tĂŠlĂŠviseur pourrait tomber
et causer de graves blussures ou la mort.Plusieurs blessures,surtout
aux enfants,peuvent ĂŞtre ĂŠvitĂŠes en prenant de simples prĂŠ cautions comme:
-Utiliser les supports recommandĂŠs par le fabricant du tĂŠlĂŠviseur.
-Utiliser uniquement des meubles pouvant supporter sĂŠcuritairement le tĂŠlĂŠviseur.
-Assurer que le tĂŠlĂŠviseur ne dĂŠpasse pas le bord du meuble.
-Ne pas installer le tĂŠlĂŠviseur sur les meubles ĂŠlevĂŠs(par exemple,armoires ou
Êtagères
Ă un support adĂŠquat.
-Ne pas placer le tĂŠlĂŠviseur sur un linge ou dâautres matĂŠriaux qui pourraient ĂŞtre
situĂŠs entre le tĂŠlĂŠviseur et le meuble-support.
-Informer les enfants sur les dangers de monter sur les meubles pour toucher
au tĂŠlĂŠviseur ou rĂŠgler les contrĂ´les.
Si votre tĂŠlĂŠviseur actuel est est retenu ou dĂŠmĂŠnagĂŠ,les mĂŞmes
considĂŠrations mentionnĂŠes ci-haut s'appliquent.
Fr
PRĂPARATION
TĂLĂCOMMANDE
1.
2.
3.
4.
5.
6.
7.
8.
9.
: Pour basculer le tĂŠlĂŠviseur entre les modes
Sous tension et Veille.
: Pour activer ou dĂŠsactiver le son du
tĂŠlĂŠviseur.
0~9: Pour sĂŠlectionner un canal. (Mode ATV/
DTV)
: Pour entrer plusieurs numĂŠros de canal, par
exemple 2-1.
: Pour revenir au canal prĂŠcĂŠdent.
APPS:Appuyez sur pour sĂŠlectionner l'APPS
souhaitĂŠe.
MENU: Pour afficher le menu dâaffichage Ă
lâĂŠcran.
SOURCE: Pour choisir parmi les diffĂŠrentes
sources du signal dâentrĂŠe. TV/HDMI1/HDMI2/
HDMI3/USB/VGA/AV/Component.
:Vous permet de naviguer dans les
système en fonction de vos prÊfÊrences.
10. OK: Confirme la sĂŠlection dans les menus
11. RETURN:Retour au menu prĂŠcĂŠdent.
12. EXIT: Pour quitter le menu OSD.
13. ASPECT: Pour sĂŠlectionner le format de lâimage
: standard/wide/wide zoom/zoom.
14. VOL+/-: Pour sĂŠlectionner un canal.
15. CH / : Pour rĂŠgler le volume.
16. TV:Appuyez sur pour mettre en mode TV.
17.
: Lancez la lecture ou mettre en pause.
: Inverser rapidement la lecture.
18.
19.
: Avancer rapidement la lecture.
20.
: Passer au dĂŠbut de la prĂŠcĂŠdente chapitre /
piste / photo.
: Passer au dĂŠbut de la prochaine chapitre /
21.
piste / photo.
22.
: ArrĂŞter la lecture.
23. INFO:
24. FREEZE: Le gel de la photo.
25. FAV: Afficher la chaĂŽne prĂŠfĂŠrĂŠe.
26. ADD/ERASE:
27. V-CHIP:
28. CC: sĂŠlection du sous-titrage : ON/OFF/CC On
Mute(ACTIVĂ/DĂSACTIVĂ/ST activĂŠ sur son
dĂŠsactivĂŠ).
29. MTS: Pour basculer entre les diffĂŠrents canaux
audio : STEREO/MONO/SAP.
30. P.MODE: Pour sĂŠlectionner le mode de lâimage :
31. CH.LIST:
32. S.MODE: Pour sĂŠlectionner le mode audio :
Fr
CONNEXION DES APPAREILS EXTERNES
HEADPHONE
Soundbar
LAN
HDMI 2
HDMI 1
VGA
Fr
PERSONNALISATION DES PARAMĂTRES DU TĂLĂVISEUR
initiale
Une fois toutes les connexions physiques ĂŠtablies, branchez le cordon dâalimentation
dans la prise de courant. Ă cette ĂŠtape, le tĂŠlĂŠviseur passera en mode Veille et le
tĂŠmoin DEL rouge sâallumera.
Une fois sous ce mode, appuyez sur la touches de lâappareil ou de la tĂŠlĂŠcommande
pour allumer le tĂŠlĂŠviseur. Le tĂŠmoin DEL rouge passera au bleu.
L a pr emièr e f ois que v ous allume z le t ĂŠlĂŠ viseur, lâa s sis t ant de c onf igur a tion
Sâil est impossible de
trouver des canaux,
cette fenĂŞtre sâaffiche
automatiquement.
Fr
10
!"
PERSONNALISATION DES PARAMĂTRES DU TĂLĂVISEUR
Diffusion
Appuyez sur la touche MENU
boutons Ă souligner STREAMING
NETFLIX
YouTube
VUDU
continue sur Internet.
Visionnez vos contenus YouTube sur le meilleur ĂŠcran de la maison.
les plus rĂŠcents Ă haute qualitĂŠ(1080p). Inscription gratuite. Aucun
abonnement, frais de retard ou engagement.
Radio gratuite et personnalisĂŠe offrant une ĂŠcoute musicale
Pandora
AccuWeather
dÊbuter avec le nom d'un artiste, d'une pièce, d'un genre ou d'un
compositeur que vous adorez, et Pandora fera le reste du travail
pour vous. Il est ainsi facile de crĂŠer des postes de radio qui ne
joueront que la musique que vous aimez.
Indique la tempĂŠrature et les conditions mĂŠtĂŠorologiques du moment
partout dans le monde en degrĂŠs Celsius ou Fahrenheit.
pour obtenir le meilleur rĂŠsultat pour regarder la vidĂŠo sur votre 4k tv 4k.
1.tu as besoin d'une connexion internet Ă haute vitesse et assurez - vous que votre bande
passante rĂŠpond Ă l'exigence de 4k du fournisseur de contenu.
2.l'accès à la vraie 4k mÊdias; seulement 4k media peut montrer la meilleure image sur 4k tv,
fonds / 1080p mĂŠdias mĂŠdias n'est pas aussi dĂŠtaillĂŠ que 4k.
Fr
11
PERSONNALISATION DES PARAMĂTRES DU TĂLĂVISEUR
MES MĂDIAS
Appuyez sur le bouton MENU
MES MĂDIAS et appuyez sur OK
SĂŠlectionnez parmi les photos, musique et vidĂŠo pour voir ce que vous aimez.
# $%Durs portables doivent ĂŞtre insĂŠrĂŠs avant d'entrer dans le menu MEDIA.
Fr
12
PERSONNALISATION DES PARAMĂTRES DU TĂLĂVISEUR
VISIONNEMENT DE PHOTOS
l'option PHOTO et appuyez sur OK, puis il sautera
OK pour
entrer.
Après avoir entrÊ PHOTO
OK
pour entrer.
Directories:10
Files:0
Total:10
Directories:10
Files:0
Total:10
Lorsque l'image est en cours, la barre image de la
sĂŠlectionner la fonction dĂŠsirĂŠe disponible sur la barre.
ĂCOUTER DE LA MUSIQUE
Utilisez les touches flĂŠches pour mettre en
surbrillance l'option MUSIC et appuyez sur OK, puis il
sautera pour confirmer le lecteur insĂŠrĂŠ, appuyez sur
OK pour entrer.
Après avoir entrÊ MUSIC, utilisez les touches flÊches
pour sĂŠlectionner le fichier musique et appuyez sur
OK pour entrer.
Directories:10
Directories:10
Files:0
Files:0
Total:10
Total:10
Après avoir entrÊ le fichier musique, utilisez les
touches flĂŠches pour sĂŠlectionner le musique
souhaitĂŠe, puis appuyez sur le bouton de lecture pour
afficher.
Lorsque le musique est en cours, la barre musique de
la fonction sera affiche. Utilisez les touches flĂŠches
pour sĂŠlectionner la fonction dĂŠsirĂŠe disponible sur la
barre.
Fr
13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2018:05:16 11:06:19+08:00 Modify Date : 2018:05:16 11:14:18+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : 打印 Creator : Administrator Metadata Date : 2018:05:16 11:14:18+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 172 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8558 bytes, use -b option to extract) Instance ID : uuid:a885739e-7649-4f64-9e00-59df5a573384 Document ID : xmp.did:900612E23B44E811859EF812F7557D92 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:2304d5ad-13c6-af41-8646-360ef867abec Derived From Document ID : xmp.did:0980117407206811822A897E387FE54C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved History Instance ID : xmp.iid:900612E23B44E811859EF812F7557D92 History When : 2018:04:20 13:45:40+08:00 History Software Agent : Adobe Illustrator CS6 (Windows) History Changed : / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 139.999723 Max Page Size H : 210.000102 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT Font Family : Arial, Arial MT Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 5.01.2x, 001.001 Font Composite : False, False Font File Name : Arial_6.ttf, Arial-BoldMT_6.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 40EXIF Metadata provided by EXIF.tools