Circus World Displays 32104 Digital Video Baby Monitor User Manual SVAT4

Circus World Displays Ltd. Digital Video Baby Monitor SVAT4

UserManual.wiki >

Circus World Displays >

32104 User Manual

Users Manual

We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods: Phone: 1.866.946.7828 LEVANA Canada LEVANA USAFax: 1.888.771.1701 4080 Montrose Road 60 Industrial Parkway #Z64Web: www.myLEVANA.com Niagara Falls, ON Cheektowaga NY Canada L2H 1J9 USA 14227Warranty Terms1. LEVANA® products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option. 2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual. 3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty. 4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specically mentioned in this warranty. 5. This warranty does not cover the shipping cost, insurance or any other incidental charges. 6. You MUST call LEVANA before sending any product back for repair. You will be sent a Return Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #). 7. This warranty is valid only in Canada and the continental U.S.8. This warranty cannot be re-issued.PRODUCT WARRANTY INFORMATIONPlease visit our website at www.myLEVANA.com for information about your product’s warranty ENGLISH(UD0DQXDOB(B)B6LQGG 30

INTRODUCTIONTABLE OF CONTENTSPRODUCT WARRANTY INFORMATION ....................................................................................................................................................... 1WHAT’S INCLUDED ................................................................................................................................................................................... 3OPTIONAL ACCESSORIES .......................................................................................................................................................................... 3FEATURES ................................................................................................................................................................................................ 4BUTTONS AND CONNECTIONS - PARENT UNIT ........................................................................................................................................... 5BUTTONS AND CONNECTIONS - CAMERA .................................................................................................................................................. 7SETTING UP YOUR SYSTEM ....................................................................................................................................................................... 8CONNECTING POWER TO THE PARENT UNIT ........................................................................................................................... 8CONNECTING POWER TO THE CAMERA .................................................................................................................................. 8MAIN MENU ICONS ................................................................................................................................................................ 9SCREEN ICONS ..................................................................................................................................................................... 10PAIRING THE CAMERA(S) & PARENT UNIT ............................................................................................................................ 11PAIRING THE ADDITIONAL CAMERAS ................................................................................................................................... 11PAGING THE PARENT UNIT ................................................................................................................................................... 11PLACEMENT OF THE PARENT UNIT ....................................................................................................................................... 12CHARGING THE BATTERY ..................................................................................................................................................... 12PLACEMENT OF THE CAMERA .............................................................................................................................................. 13MOUNTING THE CAMERA ON A TABLETOP SAFELY ................................................................................................................ 13MOUNTING THE CAMERA ON A WALL SAFELY ...................................................................................................................... 14SWITCHING THE CAMERA ON/OFF ....................................................................................................................................... 15PARENT UNIT OPERATION ...................................................................................................................................................................... 15TURNING THE PARENT UNIT ON/OFF .................................................................................................................................... 15TURNING THE SCREEN ON/OFF ............................................................................................................................................ 15USING THE TALK TO BABY™ TWO-WAY INTERCOM ................................................................................................................ 15TURNING THE NIGHTLIGHT ON/OFF ..................................................................................................................................... 16SELECTING A LULLABY ........................................................................................................................................................ 16ADJUSTING THE LULLABY VOLUME ...................................................................................................................................... 17SETTING THE BRIGHTNESS ................................................................................................................................................... 17SETTING THE TEMPERATURE ............................................................................................................................................... 17SETTING THE DATE & TIME ................................................................................................................................................... 18USING POWER SAVE MODE .................................................................................................................................................. 18SETTING THE FEEDING & NAP TIMER ................................................................................................................................... 19CHANGING THE LANGUAGE ................................................................................................................................................. 19SELECTING THE CAMERA VIEW ............................................................................................................................................ 20 ENGLISH(UD0DQXDOB(B)B6LQGG 30

TABLE OF CONTENTSCONTACTING CUSTOMER SUPPORT ...................................................................................................................................... 21TROUBLESHOOTING ............................................................................................................................................................................... 22SPECIFICATIONS .................................................................................................................................................................................... 23FCC STATEMENT .................................................................................................................................................................................... 25SAFETY INSTRUCTIONS .......................................................................................................................................................................... 25DRILLING TEMPLATE ............................................................................................................................................................................. 27NOTES ....................................................................................................................................................................................................86WHAT’S INCLUDED• 2.4" LCD Video Monitor • Night Vision Camera• Rechargeable Battery• 2 Power Adapters• Instruction Manual• 1 Year Warranty• 24/7 Lifetime Live Customer Support Camera Parent unitRechargeable BatteryEra™ Additional Camera: model 32104This system supports up to 3 additional cameras! ENGLISHOPTIONAL ACCESSORIES(UD0DQXDOB(B)B6LQGG 30

 ENGLISHFEATURESClearVu® Digital Wireless TechnologyClearVu® technology enables you to see and hear your child with outstanding precision and clarity from up to 500 feet away.Three Soothing LullabiesChoose from three dierent lullabies to soothe your baby to sleep using the parent unit.Temperature Monitoring to Ensure ComfortCheck the temperature in the nursery at any time to ensure your child is comfortableNight VisionThe built-in night vision allows you to see your child, even in complete darkness, from up to 15 feet away.Talk to Baby™ Two-Way IntercomWith the simple press of a button you can talk to your child at any time without entering the nurseryNap and Feeding TimerThe built-in custom-programmed timer reminds caregivers when your baby should be eating or sleeping. Color-Changing NightlightA gentle light show can help make the nursery more relaxing and soothing for your baby.Expand Your System - Additional CamerasAdd up to three additional cameras to expand your baby monitoring experience. Power-Saving ModeConserve your monitor’s battery power by selecting to use audio-only mode.24/7 Lifetime Live Customer SupportOur customer support team can be reached by phone 24 hours a day, 7 days a week, or by email and live web chat. You’ll always have access to an expert in English, Spanish and French.1. This product cannot replace responsible adult supervision.2. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors/Cameras with power cords should never be hung on or near the crib.3. Product may not be exactly as shown on the package. Some images are used for illustration purposes only. 4. Battery life of 4 hours based on full duration testing. Battery life may vary depending on usage.5. LEVANA does not endorse any LEVANA products for illegal activities. LEVANA is not responsible or liable in any way for any damage, vandalism, theft or any other action that may occur while a LEVANA product is in use by the purchaser. 6. Check your child’s safety at regular intervals.)(UD0DQXDOB(B)B6LQGG 30

&BUTTONS AND CONNECTIONS - PARENT UNIT1. VIDEO ON/OFF/POWER Turn video image ON/OFF or Power ON/OFF2. LED SOUND BAR LED lights show dierent levels of sound3. TALK BUTTON Press and hold to talk, release to listen4. NAVIGATIONAL BUTTONS The ŹŹŹŹ buttons allow you to navigate through the menu screens 5. SELECT BUTTON Allows you to make a selection while in the MAIN MENU6. 2.4" LCD SCREEN7. MENU BUTTON Allows you to access the MAIN MENU to customize your settings and also exit the MAIN MENU 8. VOLUME CONTROL The Ź Ź buttons allow you to increase or decrease the volume9. MICROPHONE Allows your voice/sounds to be heard clearly through the camera ENGLISH(UD0DQXDOB(B)B6LQGG 30

BUTTONS AND CONNECTIONS - MONITOR5. BATTERY6. BATTERY COVER1. SPEAKER Allows you to hear clear two-way communications2. BELT CLIP Attach the video monitor to your belt to monitor baby while on the move3. TABLE STAND Retractable, stainless-steel table stand.4. POWER INPUT(UD0DQXDOB(B)B6LQGG 30

BUTTONS AND CONNECTIONS - CAMERA1. NIGHTLIGHT Color-Changing Nightlight controlled by the parent unit2. 10 IR LEDs Emits IR light to see up to 15ft in complete darkness3. CAMERA LENS4. MICROPHONE Allows your voice/sounds to be heard clearly through the parent unit 5. SPEAKER Allows you to hear clear two-way communications6. TEMPERATURE SENSOR Reports the temperature in the room to the parent unit7. ON/OFF SWITCH Turns the camera on and o8. POWER INPUT9. PAIRING/PAGING BUTTON Allows you to pair the camera to the parent unit or to locate the parent unit ENGLISH(UD0DQXDOB(B)B6LQGG 30

SETTING UP YOUR SYSTEMCongratulations on the very special addition to your family! Here at LEVANA® we’ve had a new addition as well. We’re thrilled to announce the arrival of ERA, the next generation in digital video baby monitors. We know nothing is more important than your baby’s safety. With LEVANA you’ll nd the peace of mind you deserve.LET’S GET STARTED!Connecting power to the Parent Unit1. Connect the small end of one power adapter into the DC input on the side of the parent unit as shown in the diagram. 2. Connect the other end of the adapter into an available wall outlet.Connecting power to the Camera1. Take the second power adapter and connect the small end of the power adapter into the DC input on the back of the camera as shown in the diagram. For safety reasons, ONLY use the adapters included in the package. 2. On the back of the camera, slide the power switch to the RIGHT for the ON position. ENGLISH(UD0DQXDOB(B)B6LQGG 30

SETTING UP YOUR SYSTEMMAIN MENU ICONS&Nap and Feeding TimerSet, pre-set and turn the nap or feeding timer on/o. Three Soothing LullabiesSelect or turn o the lullaby featurePower-Saving ModeSelect to turn audio-only mode on or oDate and TimeSet the Date and Time; select Display Time on or oCamera SelectionChoose to view Cam 1, Cam 2, Cam 3, Cam 4, Quad View or Sequence Mode Customer SupportSelect to view our dierent Customer Support optionsColor-Changing NightlightTurns the nightlight on or o at any timeTemperature MonitoringSelect to turn temperature monitoring on or o to ensure your child is comfortableLanguageChoose to view your menu options in English, French or SpanishBrightnessChoose from ve brightness levels for your screenPairingSelect when pairing your camera(s) ENGLISH(UD0DQXDOB(B)B6LQGG 30

 ENGLISHSETTING UP YOUR SYSTEMSCREEN ICONS)301. CURRENT TIME2. LULLABY/VOLUME Shows you the lullaby playing and volume level3. SIGNAL STRENGTH Indicates the signal strength between the camera and parent unit4. FEEDING/NAP TIMER 5. ROOM TEMPERATURE Allows you to view the current temperature in the baby’s room6. VOLUME Indicates the volume level 7. BATTERY STRENGTH Shows you the current level of battery power and when to recharge8. CAMERA VIEW Shows you which camera is currently viewed(UD0DQXDOB(B)B6LQGG 30

Pairing the camera(s) and parent unitThe camera and parent unit come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually.1. To pair your camera and parent unit, press the MENU button. Using the navigational arrows on the front of the parent unit, highlight the pairing icon and press the LEVANA button once to select. 2. When pairing a single camera, select the icon. When you see PAIRING on the screen, quickly use the tip of the paper clip to press and hold the pairing button on the back of the camera. When successfully paired, you will see PAIRING SUCCESSFUL and the video/audio will be transmitted automatically. To pair additional cameras, repeat steps 1 to 3 and be sure to select the correct camera number in the Pairing menu for each additional camera. Paging the parent unit If you misplace the parent unit, you can use the Paging function to locate it by pressing the Pairing Button once. The parent unit will beep slowly until it is found. Press any button on the parent unit to stop the beep.SETTING UP YOUR SYSTEMNote: If the NO DEVICE FOUND message appears on the main screen, disconnect and reconnect the power supply from the camera, make sure the ON/OFF switch is ON and start the PAIRING process from the beginning.Note: Before you begin, be sure to have the parent unit and the camera(s) side by side. We also recommend having a paper clip on hand to push the PAIRING ENGLISHPairing(UD0DQXDOB(B)B6LQGG 30

SETTING UP YOUR SYSTEMPlacement of the Parent unitThis parent unit can be placed on a tabletop or you can also carry it on your belt. 1. You can place the parent unit on a tabletop by using the retractable, stainless-steel table stand on the back of the parent unit. When not in use, simply tuck table stand away into the back of the parent unit. 2. You can also carry the parent unit on your belt by using the integrated belt clip on the back of the parent unit and sliding the clip over your belt.Charging the Battery1. Connect the small end into the DC Jack on the side of the parent unit as shown in the diagram, connect the other end of the adapter into an available wall outlet. 2. The icon in the top right corner of the main screen will show you the battery power status.3. For safety reasons, ONLY use the adapters included in the package.Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.RemoveableBelt clipTable standBatteryChargingBatteryFullBatteryEmptyTwo BarsOne Bar ENGLISH(UD0DQXDOB(B)B6LQGG 30

SETTING UP YOUR SYSTEMPlacement of the cameraThis camera can be placed on a tabletop or hung from a screw on the wall above the area being monitored. Place the camera within 15 feet of the area being monitored for best picture results. Connecting power to the camera1. Connect the small end into the DC input on the back of the camera, connect the other end of the adapter into an available wall outlet.Mounting the camera on a tabletop safely:1. Place the camera on a tabletop no less than 3 feet away from your baby’s crib.2. Feed the power cord down the back of the table or use wall clips (not included) to secure the cord away so the baby cannot reach it.3. Plug in the power cord, check the parent unit to ensure that you are getting a good view of your child and there are no obstructions.Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times. ENGLISH(UD0DQXDOB(B)B6LQGG 30

SETTING UP YOUR SYSTEMMounting the camera on a wall safely:Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from baby’s crib.1. Using the Drilling Template (page 30) as a guide, pre-drill two holes in the wall using a 3/16”, 4.8mm drill bit.2. Insert wall anchors (not included) into each hole and tap gently with a hammer until the anchor is ush with the wall.3. Insert a screw (not included) into each wall anchor and tighten until the screws only stick out about a 1/2 inch.4. Plug the power cord into the power input of the camera.5. Locate the wall mounting holes on the bottom of the camera support.6. Slide the holes over the screws sticking out of the wall.7. Conrm that the camera is secure, if it is loose you may have to tighten the screws more.8. Use wall clips (not included) to secure the power cord away from the crib or the baby’s reach. 9. Connect the other end of the adapter into an available wall outlet.Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times. ENGLISH(UD0DQXDOB(B)B6LQGG 30

Turning the Nightlight ON/OFFYou can control the color-changing nightlight from the parent unit, turning it on or o without entering the nursery.1. Press the MENU button once. Use the navigational arrows on the front of the parent unit to go to the Nightlight icon and press the LEVANA button once to select. 2. Use the navigational arrows to choose the Nightlight ON icon and press the LEVANA button once to select. The nightlight will gently light up the room, changing colors from red, green and blue.3. To turn o the nightlight, press the MENU button once and go back to the Nightlight icon and press the LEVANA button once to select. 4. Use the navigational arrows to choose the Nightlight OFF icon and press the LEVANA button once to select. Selecting a LullabyYou have a choice of three dierent lullabies to soothe your baby to sleep. With the parent unit, you can turn lullabies on and o, change the song and adjust the volume from wherever you are in the house. 1. To turn on the lullaby feature, press the MENU button once. Use the navigational arrows to choose the Lullaby icon and press the LEVANA button once to select. 2. Using the navigational arrows, toggle to your choice of lullaby and press the LEVANA button once to make your selection. Your music selection will begin to play. 3. To turn OFF the lullabies, press the MENU button once. Use the navigational arrows to choose the Lullaby icon and press the LEVANA button once to select. Using the navigational arrows, toggle to the lullaby OFF icon and press the LEVANA button once to select. 4. Press the MENU button once to exit the menu screen and return to the main menu.PARENT UNIT OPERATIONNote: The main screen will show you which lullaby selection is currently playing:  , or . ENGLISH&Nightlight&Lullaby(UD0DQXDOB(B)B6LQGG 30

Adjusting the Lullaby VolumeTo increase or decrease the lullaby volume, use the Ź arrow to increase the volume while the lullaby is playing. Use the Ź arrow to decrease the volume while the lullaby is playing.Setting the BrightnessYou have a choice of ve dierent screen brightness settings to choose from.1. To change the screen brightness, press the MENU button once. Use the navigational arrows to choose the Brightness icon and press the LEVANA button once to select. 2. Using the navigational arrows on the front of the parent unit, toggle to your screen brightness selection; the icon represents the lowest setting and the icon represents the brightest setting. 3. Press the LEVANA button once to make your selection and press the MENU button once to exit the menu screen.Setting the TemperatureYou can check the temperature in the nursery at any time to ensure your child is comfortable. The camera detects the temperature in the baby’s room and displays it on the parent unit. You have a choice of setting the temperature reading to °F or °C.1. To turn the Temperature mode on, press the MENU button once. Use the navigational arrows to choose the Temperature icon and press the LEVANA button once to select. 2. Using the navigational arrows, toggle to your choice of setting and press the LEVANA button once to make your selection. 3. Press the MENU button once to exit the menu screen and return to the main menu. Your Temperature selection will appear in the bottom left corner of the main screen.& ENGLISHPARENT UNIT OPERATION&TemperatureBrightness(UD0DQXDOB(B)B6LQGG 30

Setting the Date and Time1. To set the Date and Time, press the MENU button once. Use the navigational arrows to choose the Date and Time icon then press the LEVANA button once to select. 2. To adjust the date, use the navigational arrows to toggle to the DATE then press the LEVANA button once to select. 3. Use the Ź Ź navigational arrows to increase/decrease the numbers. Use the Ź Ź navigational arrows to move between MM/DD/YYYY. Press the LEVANA button once to conrm your selection. 4. To adjust the TIME, use the navigational arrows to toggle to the TIME then press the LEVANA button once to select. 5. Use the Ź Ź navigational arrows to increase/decrease the numbers. Use the Ź Ź navigational arrows to move between HH:MM, AM/PM. Press the LEVANA button once to conrm your selection. 6. To display the time on the main screen, use the navigational arrows to toggle to DISPLAY TIME, select ON then press the LEVANA button once to select. 7. Press the MENU button once to exit the menu screen and return to the main menu. The TIME will appear at the top of the main screen.Using Power Save ModeUsing the Power Save mode turns the screen o but keeps the audio on.1. Press the MENU button once. Using the navigational arrows on the front of the parent unit, highlight the Power Save icon and press the LEVANA button once to select.2. The screen can turn o after 15 seconds, 1 minute, or return to the o position. Use the navigational arrows and press the LEVANA button once to select.3. Press any button to turn the screen back on. ENGLISHPARENT UNIT OPERATION&Date & Time&Power Save(UD0DQXDOB(B)B6LQGG 30

Setting the Feeding and Nap TimerThis custom-programmed timer reminds you when your baby should be eating or sleeping. You can set up to 10 separate timers. The time is also displayed on the screen for handy referencing throughout the day. 1. To set the Feeding and Nap Timer, press the MENU button once. Use the navigational arrows to choose the Feeding/Nap Timer icon then press the LEVANA button once to select. 2. Use the navigational arrows to toggle to one of the timers then press the LEVANA button once to select. 3. Use the Ź Ź navigational arrows to increase/decrease the time. Use the ŹŹnavigational arrows to move between HH:MM, AM/PM and to turn the timer on and o . Press the LEVANA button once to conrm your selection. 4. To set multiple timers, simply repeat steps 2 and 3. 5. Press the MENU button once to exit the menu screen and return to the main screen. The icon will appear at the top of the main screen when the timer is ON.6. When the timer expires, the parent unit will beep until you press any button to turn it o. Changing the LanguageYou have a choice of three dierent languages; English, French and Spanish. The parent unit is set automatically to English. 1. Press the MENU button once. Using the navigational arrows on the front of the parent unit, highlight the Language icon and press the LEVANA button once to select.2. Using the the navigational arrows, toggle to your choice of Language and press the LEVANA button once to make your selection. 3. Press the MENU button once to exit the menu screen and return to the main menu.Note: The timer will repeat at the same time EVERYDAY until you turn it o manually in the Feeding/Nap timer menu. ENGLISHPARENT UNIT OPERATIONFeeding/Nap Timer&Language(UD0DQXDOB(B)B6LQGG 30

CameraSelecting the Camera ViewIf you have more than one camera, you have many monitoring options; Single View, Quad View and Sequence Mode.1. Press the MENU button once. Use the navigational arrows to choose the Camera icon then press the LEVANA button once to select. 2. Use the navigational arrows to select one of the options below and press the LEVANA button once to select. Press the MENU button to exit the menu screen.• Single view : Allows you to view one camera at a time.• Quad view : Allows you to view all paired cameras at the same time. • Sequence Mode 1 : Allows you to view all paired cameras one at a time, in sequence. ENGLISHPARENT UNIT OPERATION(UD0DQXDOB(B)B6LQGG 30

Contacting Customer SupportOur customer support team can be reached by phone 24 hours a day, 7 days a week, or by email and live web chat. You’ll always have access to an expert in English, Spanish and French.1. To access the Support information anytime, press the MENU button once. Use the navigational arrows to choose the Support icon then press the LEVANA button once to select. 2. This will take you to the screen which displays our telephone number, email address and website.3. Press the MENU button to exit the menu screen and return to the main screen. ENGLISHPARENT UNIT OPERATIONTelephone: 1.866.946.7828Online live web chat: Visit www.myLEVANA.comEmail: support@myLEVANA.com Support(UD0DQXDOB(B)B6LQGG 30

TROUBLESHOOTINGISSUE POSSIBLE SOLUTIONEquipment does not function • Camera and/or parent unit are not switched on• The battery is drained• The power adapters are not connectedNo reception • Camera and parent unit are not paired• Camera is too far away from parent unit• Wrong camera channel is selected (manufacturer has preset and paired the included camera to camera channel 1)Reception Interference (static) • The camera and parent unit are too far apart• The battery power is too low• Other electronic devices are interfering with the signal• The camera or parent unit are placed near too many metal objectsFeedback (screeching, static) • The camera and parent unit are too close together• The volume on the parent unit is set too highPicture, no sound • Volume setting is too low Picture is black and white • Night vision LEDs are ON; Increase the amount of light in the room being monitoredThe rechargeable battery will not charge • The power adapter is not connected to the parent unit• Battery pack is not seated properly inside the battery compartmentMaintenance• Clean the surfaces of the camera and parent unit with a soft, lint-free cloth• If the units become dirty, please use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings• Never use cleaning agents or solvents ENGLISH(UD0DQXDOB(B)B6LQGG 30

Parent Unit SpecicationsMonitor Type TFT LCDScreen Size 2.4"Resolution 320 x 240Frame Rate Up to 30 FPSFrequency 2.4GHzTechnology Digital FHSSNo. of hop/sec 1,000No. of hopping channels 33Channel bandwidth 2 MHzData Rate 2 MbpsTransmission Power +16 dBmTransmission Range 500ftOptimum Transmission Range 150ftSpeaker YesMicrophone YesBattery Operable Yes, Rechargeable Li-IonBattery Life 4 hrsBattery Low Warning YesHousing Material ABS PlasticPower Adapter Input DV 5V / 600mAPower Adapter 110~230V 0.1AOperating Temperature 0-45°CDimensions 4.75x2.25x0.75"Weight 0.3lbsSPECIFICATIONS ENGLISH(UD0DQXDOB(B)B6LQGG 30

Camera SpecicationsImage sensor CMOSResolution 1600 x 1200Night Vision 10ftNumber of IR LEDs 10Battery Operable NoViewing Angle 60°Focal Length 2.8mmOptimal Focal Distance 2-10ftTransmission Range 500ftOptimum Transmission Range 150ftMicrophone YesSpeaker YesHousing Material ABS PlasticWall Mountable YesPower Adapter Input DV 5V / 600mAPower Adapter 110~230V 0.1AOperating Temperature 0-45°CDimensions 4x2.75x2.5"Weight 0.2lbs ENGLISHSPECIFICATIONS(UD0DQXDOB(B)B6LQGG 30

25FCC STATEMENTRead and Keep Instructions: All the safety and operating instructions should be read before the video baby monitor is operated.This product cannot replace responsible adult supervision.Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors with power cords should never be hung on or near the crib.SAFETY INSTRUCTIONS ENGLISH30101 Era Manual_E_F_S.indd 25 14/12/2011 3:44:14 PMWarning: could void the user's authority to operate the device.FCC NoticeThis device complies with Part 15, subpart C, of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. void the user’s authority to operate the equipment.However, it is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the unit, electrical In order to improve the features, functions, and notice from time to time.Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the camera at least 20cm (7.87in) from nearby persons. The video monitor has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.Canada/IC NoticeThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The CWD Baby monitor series model Era is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Water and Moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No objects lled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water.Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use.Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air ow.Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight.Power Source: This unit should only be used with the AC power adapters included in this package (rated 6V 800mA)Damage Requiring Service: This unit should be serviced by qualied personnel only when:a. Objects have fallen or liquid has been spilled into the productb. The units have been exposed to rainc. The units do not appear to operate normally or exhibits a distinct change in performanced. The units have been dropped or the enclosure damagedCaution: This product cannot replace responsible adult supervision of a child. STATEMENT ON REGULATIONThese units are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for helpOperation with non-approved equipment or unshielded cables is likely to result in interference to radio or TV reception. The user is cautioned that changes and modications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.SAFETY INSTRUCTIONS ENGLISH(UD0DQXDOB(B)B6LQGG 30

DRILLING TEMPLATE / GABARIT DE PERÇAGE / SPANISH• To wall mount the camera, pre-drill two holes using a 3/16", 4.8mm drill bit and the template below. Insert wall anchors into holes then insert a screw into each wall anchor. Tighten until the screws only stick out about a 1/2".• Pour le montage mural de la caméra, percez deux trous d’avance à l’aide d’un foret de 3/16 po, 4,8 mm utilisant le gabarit de perçage ci-dessous. Insérez les chevilles dans les trous ensuite insérez une vis dans chaque cheville. Serrez les vis jusqu’à ce qu’elles dépassent seulement par environ un ½ po.• Para instalar la cámara en la pared, realice las marcas de dos oricios en la pared, que luego perforará, utilizando un taladro con una broca de 3/16”, 4.8mm y la plantilla que se muestra abajo. Inserte anclajes de pared en los oricios; luego, inserte un tornillo en cada anclaje de pared. Ajuste los tornillos hasta que sobresalgan solo 1/2”.DRILLING TEMPLATE(UD0DQXDOB(B)B6LQGG 30

$<RXU&KLOG,V6DIH700&'R0RUH.QRZLQJ3OHDVHYLVLWZZZP\/(9$1$FRPIRU:DUUDQW\LQIRUPDWLRQ3URGXFW6XSSRUW&RQWDFWLQIRUPDWLRQ8VHU0DQXDO'RZQORDGVDQGPXFKPRUH(UD0DQXDOB(B)B6LQGG 30$

Navigation menu