Circus World Displays LVTW502B Levana Twinkle502 User Manual

Circus World Displays Ltd. Levana Twinkle502

Users Manual

86H560$18$/ZZZP\/HYDQDFRP
We take quality very seriously. This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods: Phone: 1.866.946.7828 LEVANA Canada LEVANA USAFax: 1.888.771.1701 4080 Montrose Road 60 Industrial Parkway #Z64Web: www.myLEVANA.com Niagara Falls, ON Cheektowaga NY 14227 Canada, L2H 1J9 USA 14305Warranty Terms1. LEVANA products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option. 2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual. 3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty. 4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specically mentioned in this warranty. 5. This warranty does not cover the shipping cost, insurance or any other incidental charges. 6. You MUST call LEVANA before sending any product back for repair. You will be sent a Return Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #). 7. This warranty is valid only in Canada and the continental U.S.8. This warranty cannot be re-issued.PRODUCT WARRANTY INFORMATIONPlease visit our web site at www.myLEVANA.com for information about your product’s warranty2
3INTRODUCTIONPRODUCT WARRANTY INFORMATION .................................................................. 2INTRODUCTION ................................................................................................ 3FEATURES ........................................................................................................ 4WHAT’S INCLUDED ............................................................................................ 5BUTTONS AND CONNECTIONS - MONITOR ............................................................. 6BUTTONS AND CONNECTIONS - CAMERA .............................................................. 8SETTING UP YOUR SYSTEM ................................................................................. 10PLACING THE BABY MONITOR ............................................................... 10BATTERY OPERATION .......................................................................... 10ATTACHING POWER TO THE CAMERA ..................................................... 10USING THE RECHARGEABLE BATTERY .................................................... 11ATTACHING POWER TO THE CHARGING BASE .......................................... 11CHARGING THE MONITOR AND RECHARGEABLE BATTERY ......................... 11CAMERA OPERATION ......................................................................................... 12SWITCHING THE CAMERA ON/OFF ......................................................... 12NIGHT VISION .................................................................................... 12MONITOR OPERATION ....................................................................................... 13SWITCHING THE CAMERA ON/OFF ......................................................... 13SETTING THE BRIGHTNESS ................................................................... 13ADJUSTING THE TEMPERATURE MEASUREMENT ..................................... 13SWITCHING THE NIGHT LIGHT ON/OFF ................................................... 14SWITCHING THE VIBRATION FUNCTION ON/OFF ..................................... 14ADJUSTING THE VOX SENSITIVITY ......................................................... 15SELECTING A LULLABY ......................................................................... 15INTERCOM FEATURE ............................................................................ 16RANGE .............................................................................................. 16ADJUSTING THE VOLUME ..................................................................... 16PAIRING THE DEVICES ....................................................................................... 17TROUBLESHOOTING .......................................................................................... 18SPECIFICATIONS ............................................................................................... 19FCC STATEMENT ............................................................................................... 20SAFETY INSTRUCTIONS ...................................................................................... 20TABLE OF CONTENTSDigital Video Baby Monitor! This monitor uses advanced Clearvu® digital technology that will deliver a crystal clear view of your baby’s room no matter where you are in the house. Feel free to relax and take comfort in knowing that your child is in good hands with Levana.Congratulations on your purchase of the Levana TW502
4FEATURESClearVu® Digital Wireless TechnologyClearVu® technology ensures outstanding image and sound clarity so that you can watch and listen to your child up to 450ft away. With Levana, you’ll never miss a moment.Temperature Monitoring to Ensure SafetyMany studies indicate that your baby’s room should be between 61°-68° F (16°-20° C). This system is equipped so you can monitor the temperature in your baby’s room and know that they are always safe and comfortable.Sound-Activated VibrationThis unique feature allows you to monitor your baby’s every sound without any loud disturbances. Simply turn on the vibrate function and the parent unit will vibrate whenever any noise is detected in your baby’s room. Night VisionThe built-in night vision allows you to see your child, even in complete darkness. When the lights go down the system automatically adjusts to the level of light. With 10ft of night vision range, the camera can be placed anywhere in your child’s room while still displaying a precise image of your baby.Relaxing LED Night LightThe baby unit has a gentle night light that you are able to turn on and o from the parent unit. Turn the light on if your baby is getting restless to calm them and turn it o when your baby is asleep, all without going into the baby’s room. Five Soothing LullabiesChoose from ve dierent lullabies to sooth your baby to sleep. Turn lullabies on and o as well as change the song being played all from the parent unit with the simple push of a button. Voice Activated ControlConserve battery power with VOX activation. You have the ability to adjust the level of sound needed in order for your monitor to turn on. Turn VOX up high if your baby is quieter or turn it down low at night, so you are only woken when your baby really needs you. Talk to Baby IntercomSooth your baby from a distance with the talk-to-baby intercom. With the simple press of a button you can let your baby know you are on your way to their nursery or simply talk to them until they fall back to sleep without having to go into his or her room. Rechargeable MonitorWhen you’re not on the move, simply put your monitor on its base to recharge – no batteries required! Enjoy up to four hours of continuous audio and video monitoring with a fully charged unit.
5FEATURESLED Noise Level Indication LightsThe monitor has LED lights on it that light up to display up to ve dierent levels of sound. This means you can turn the volume all the way down, relax and still know when and how much noise your baby is making. All-in-One Table Stand and Belt ClipThe table-stand also functions as a belt clip for ultra usability. With the table stand, place the monitor upright when you are in the same room or carry the monitor with you and still have both hands available by using the belt clip. Energy Ecient Power AdapterThe power adapters save you on power all while saving the environment. They are rated with a Level V eciency standard which means they are 30% more energy ecient then other conventional power adapters.Wall Mount on Baby Camera for the Best Viewing Angle The camera can be wall mounted so you can easily view your baby in its crib as well as see all other parts of the nursery. 24/7 Lifetime Live Customer SupportOur customer support team can be reached by phone 24/7 or by email and live web chat services, so you always have access to an expert.WHAT’S INCLUDED 
71. AntennaTransmits and receives signals2. Volume Level LEDsIndicates the amount of sound being heard by the camera3. Increase Volume and BrightnessIncreases the volume through the speaker, and adjusts settings in the menu4. Decrease Volume and BrightnessDecreases the volume through the speaker, and adjusts settings in the menu5. ON/OFF SwitchTurns the unit ON and OFF6. Power LEDIlluminated green when the monitor has power, blinks when there is no camera detected 7. MicrophoneCaptures the sound of your voice in intercom mode8. Charging BasePlace the monitor in the charging base to recharge the battery9. Play/PausePlays or pauses the lullaby playing through the camera10. Lullaby Selector Selects the lullaby that the camera will play11. Talk Button Enables you to speak through the camera intercom12. Menu Button Brings up the menu options13. VOX LED Illuminates red when VOX is enabled (see page 15 for more information)14. SpeakerBelt Clip and Support Located on Back of MonitorBUTTONS AND CONNECTIONS - MONITOR
91. AntennaTransmits and receives signals2. Night Vision IR LEDsAllows you to see up to 10 feet in complete darkness3. Camera LensPoint at what you would like to view on the monitor4. MicrophoneCaptures all sounds in the baby’s room5. Night LightSoothe baby to sleep with the built in night light6. CDS Light Sensor Detects the absence of light and turns on night vision 7. Power LED Indicates that the camera is powered on 8. Power Input Plug the included adapter into this jack9. Temperature Sensor Reads the temperature and displays it on the monitor 10. Battery Compartment Remove screw to install 4 AAA batteries (not included) for a completely wireless systemBUTTONS AND CONNECTIONS - CAMERA
10SETTING UP YOUR SYSTEMPlacing the Baby MonitorThis monitor can be placed on a tabletop or hung from a screw on the wall above the area being monitored. Place the monitor within ten feet of the area being monitored for best picture and to ensure that everything will be visible with the IR LEDs on.1. You can carry the monitor on your belt by turning up the clip on the back of the monitor. 2. You can also set up the monitor on a tabletop by turning the belt clip down and using it as a support stand.Battery OperationThe camera unit can be powered using 4 AAA batteries instead of the included AC adapter.1. Remove the battery compartment cover on the bottom of the camera base, using a small phillips (cross) head screwdriver.2. Place 4 AAA batteries (not included) in the compartment, paying attention to the labelled polarity markings.3. Replace the battery compartment cover using the small screwdriver.Note: The power LED will ash when the battery charge is low. Attaching Power to the Camera1. Connect the AC adapter to the transmitter as shown in the diagram. 2. Connect the small end into the DC Jack on the back of the camera, connect the other end of the adapter into an available wall outlet.
11Using the Rechargeable Battery1. Turn the belt clip on the back of the monitor unit, upwards.2. Remove the battery compartment cover by sliding it down o the back of the monitor3. Insert the included rechargeable battery, plug the battery cord in to the small jack on the inside of the battery compartment.Attaching Power to the Charging Base1. Connect the AC adapter to the charging base as shown in the diagram. 2. Connect the small end into the DC Jack on the back of the charging base, connect the other end of the adapter into an available wall outlet.3. For safety reasons, use ONLY the adapters included in the package.Charging the Monitor and Rechargeable Battery1. To charge the battery in the monitor unit, place the monitor frontwards onto the charging dock once the power adapter has been attached.2. The power LED will light up red to indicate that the battery is being charged.3. For safety reasons, use ONLY the adapters included in the package.Note: When the battery in the monitor is low battery, the power LED will ash slowly, recharging the battery will be required shortly after.SETTING UP YOUR SYSTEM
12CAMERA OPERATIONSwitching the Camera ON/OFFPosition the camera to view the area you wish to monitor, angle the camera lens for best view, by turning it up or down.1. Slide the power switch to the ON position.2. The Power LED on the front of the camera will light up green. The camera is now ready to operate.3. To turn OFF the camera, ip the power switch back to the OFF position Note: If you are using batteries to power the camera unit, and it does not start up when the power switch is in the ON position, you may need to replace the batteries. The Power LED will ash slowly when the batteries are low power.Night VisionThe camera is equipped with eight IR (infrared) LEDs. These LEDs, located on the front of the camera, allow you to see up to ten feet in complete darkness. Allowing you to check your baby at any time of night.The night vision LEDs will activate automatically when the camera detects that the light levels are too low.
13Switching the Monitor ON/OFF1. Press and hold the power button until you hear two beeps.2. The LEVANA logo will appear on the screen for a moment followed by the picture being transmitted.3. To turn o the unit, press and hold the power button again for 1 second. MONITOR OPERATIONNote: The power LED will ash slowly when the rechargeable battery is low power.Setting the Brightness1. Press the menu button once.2. The brightness icon will display on the screen along with the brightness gauge that will indicated the current set level.3. Use the up and down buttons on the left side of the monitor to adjust the brightness level up and down.Adjusting the Temperature MeasurementThe ideal temperature for a baby’s room is between 16° - 20° celcius or 61° - 68° fahrenheit. Please set or adjust the room temperature accordingly.1. Press the menu button twice.2. The temperature icon will display on the screen along with the current status of the temperature function, either Celcius, Fahrenheit, or OFF.3. Use the up and down buttons on the left side of the monitor to turn the temperature function ON, to display either Celcius or Fahrenheit temperatures, or to set the temperature function OFF.
14Switching the Night Light ON/OFF1. Press the menu button three times.2. The night light icon will display on the screen along with the current status of the function, either ON or OFF.3. Use the up and down buttons on the left side of the monitor to turn the night light of the camera ON or OFF.Switching the Vibration Function ON/OFF1. Press the menu button four times.2. The vibration icon will display on the screen along with the current vibration status that will indicate whether the function is ON or OFF.3. Use the up and down buttons on the left side of the monitor to adjust the vibration function ON or OFF.MONITOR OPERATIONNote: When the vibration function is ON, the monitor will vibrate to alert you every time that sound is detected over a certain level by the camera.
15Adjusting the VOX* SensitivityVOX = Voice Operated Transmission = Sound DetectionThe VOX function causes the camera to transmit video and audio immediately after a sound is heard. Once transmission begins, the video will play for 10 seconds if no more noise is heard. Pressing a button on the monitor will also turn the screen and transmission ON at any time.Setting the sensitivity of the VOX function will aect how easily the video will be transmitted, one bar will require much louder sounds being detected before transmission will begin, than the ve bar setting requires.1. Press the menu button ve times.2. The VOX icon will display on the screen along with the current status of the function, either OFF or a gauge indicating the current sensitivity, 1-5.3. Use the up and down buttons on the left side of the monitor to turn the VOX function OFF or adjust the sensitivity up and down. One bar being the lowest and ve bars being the highest sensitivity.Selecting a Lullaby1. Press the play/pause button on the right hand side of the monitor once.2. The lullaby icon will appear on the monitor screen, and the last played lullaby will start to play.3. Press the lullaby button on the right side of the monitor to select one of ve lullabies to play.4. Press the up and down volume buttons during playback to adjust the volume of the music.MONITOR OPERATIONNote: If no number is displayed beside the lullaby icon, all ve lullabies will play one after another until the play/pause button is pressed again.
16MONITOR OPERATIONIntercom FeatureThis video baby monitor is equipped with a 2-way audio intercom to enable you to talk to and soothe your baby back to sleep without going into the room.1. Press and hold the intercom button in the middle of the front of the monitor.2. The intercom icon will appear on the monitor screen, and you will be able to speak and be heard through the speaker in the camera.3. To stop talking release the intercom button. Range1. When the distance between the camera and monitor is too great, the screen will go black and the range icon will appear , if this happens you will have to move the units closer together.Adjusting the volume1. In normal monitor operation, you can press the up and down buttons on the left hand side of the monitor to adjust the volume of the noises you are hearing from the baby’s room.
17PAIRING THE DEVICESThe camera and monitor come paired (connected) together. If you do receive this package and the devices do not automatically connect and transmit, you may do so manually.1. Slide the power switch on the right hand side of the camera to the OFF position.2. Cover the light sensor on the front of the camera with your nger or a cloth.3. Slide the power switch on the camera to the ON position.4. With the monitor switched on, press and hold the play/pause button for two seconds. 5. The pair icon will appear on the screen and the power LED on the camera will blink for a few seconds.6. Press the menu button on the monitor to conrm the setting.7. C1... OK! will appear when the camera and monitor are paired successfully and then the video and audio will be transmitted automatically.Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all sources of power from the camera and monitor and start the pairing process over again.
18TROUBLESHOOTINGPROBLEM SOLUTIONEquipment does not function • Camera and/or monitor are not switched on• The battery is dead or defective• The power adapters are not connectedNo reception • Camera and monitor are not paired• Camera is too far away from monitor• The VOX sensitivity is set too lowReception Interference (static) • The camera and monitor are too far apart• The battery power is too low• Other electronic devices are interfering with the signal• The camera or monitor are placed near too many metal objectsFeedback (screeching, static) • The camera and monitor are too close together• The volume on the monitor is set too highNoise • Battery power is too lowPicture works but there is no sound • Volume setting is too low Picture is black and white • Night vision LEDs are ON• Increase the amount of light in the room being monitoredThe rechargeable battery will not charge• The power adapters are not connected• Battery pack is not plugged in inside the battery compartment• The monitor is not docked properlyMaintenance• Clean the surfaces of the camera and monitor with a soft, u-free cloth• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings• Never use cleaning agents or solvents
19SPECIFICATIONSCamera SpecicationsInput Power...............................................................100 - 240 VAC, 50 - 60 Hz ~ 200mAOutput Power ............................................................6 VDC ~ 800mAIR LEDs and Range .....................................................8 LEDs, 10 foot rangeRange.........................................................................450 Feet MaximumFrequency Range .......................................................2.4 GHzOperable Temperature ...............................................32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)Transmission Power ...................................................Monitor SpecicationsInput Power ..............................................................100 - 240 VAC, 50 - 60 Hz ~ 200 mA Output Power ............................................................6VDC ~ 800mAOperable Temperature ...............................................32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)Screen Size ................................................................2.4”Initial Charging Time .................................................3 HoursBattery Power Time ...................................................4 Hours< 20 dBm
)&&$33529(' 6$)(7<,16758&7,216Read and Keep Instructions: All the safety and operating instructions should be read before the video baby monitor is operated.Water and Moisture: This product is designed for indoor use only. The unit should not be place on top of, or beside the product, such as a glass or vase. This item should not be used near water.Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use.16/09/2010 12:47:22 PMThe manufacturer is not responsible for any radio or TV interference caused by authority to operate the equipment.For baby unit This equipment complies with FCC radiation exposure limits set forth for uncontrolledenvironment. Devices that allow transmissions while worn next to the body using an accessory are tested with the device and associated accessories in all applicable orientations, at the minimum separation distance, using a flat phantom, and 1g SAR <1.6 W/kg. This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter. For parents unitFCC Label Compliance StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interferenceThis device must accept any interference received, including interference that may cause undesired operation This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment .This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
21SAFETY INSTRUCTIONS Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air ow.Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight.Power Source: This unit should only be used with the AC power adapters included in this package (rated 6V 800mA)Damage Requiring Service: This unit should be serviced by qualied personnel only when:a. Objects have fallen or liquid has been spilled into the productb. The units have been exposed to rainc. The units do not appear to operate normally or exhibits a distinct change in performanced. The units have been dropped or the enclosure damagedCaution: This product cannot replace responsible adult supervision of a child. You should personally check your child’s activity at regular intervals.STATEMENT ON REGULATIONThese units are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for helpOperation with non-approved equipment or unshielded cables is likely to result in interference to radio or TV reception. The user is cautioned that changes and modications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.
3OHDVHYLVLWZZZP\/HYDQDFRPIRU:DUUDQW\LQIRUPDWLRQSURGXFWVXSSRUWFRQWDFWLQIRUPDWLRQXVHUPDQXDOGRZQORDGVDQGPXFKPRUH

Navigation menu