Circus World Displays LVTW502B Levana Twinkle502 User Manual
Circus World Displays Ltd. Levana Twinkle502
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1533598 |
| Application ID | nfYTu4n4fh9O0kqKqfIPQg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 57.67kB (720850 bits) |
| Date Submitted | 2011-08-31 00:00:00 |
| Date Available | 2011-08-31 00:00:00 |
| Creation Date | 2011-08-24 18:10:07 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2011-08-30 09:42:13 |
| Document Title | user manual.pdf |
| Document Creator | Adobe Illustrator CS3 |
| Document Author: | a |
86H560$18$/
ZZZP\/HYDQDFRP
PRODUCT WARRANTY
INFORMATION
Please visit our web site at www.myLEVANA.com
for information about your productâs warranty
We take quality very seriously. This is why all of our products come with a one year warranty from
the original purchase date against defects in workmanship and materials. If you have warranty or
support issues please contact us using any of the following methods:
Phone: 1.866.946.7828
Fax:
1.888.771.1701
Web: www.myLEVANA.com
LEVANA Canada
4080 Montrose Road
Niagara Falls, ON
Canada, L2H 1J9
LEVANA USA
60 Industrial Parkway #Z64
Cheektowaga NY 14227
USA 14305
Warranty Terms
1. LEVANA products are guaranteed for a period of one year from the date of purchase against
defects in workmanship and materials. This warranty is limited to the repair, replacement or
refund of the purchase price at LEVANAâs option.
2. This warranty becomes void if the product shows evidence of having been misused,
mishandled or tampered with contrary to the applicable instruction manual.
3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the
terms of this warranty.
4. The warranty expressly provided for herein is the sole warranty provided in connection with
the product itself and no other warranty, expressed or implied is provided. LEVANA assumes
no responsibilities for any other claims not specifically mentioned in this warranty.
5. This warranty does not cover the shipping cost, insurance or any other incidental charges.
6. You MUST call LEVANA before sending any product back for repair. You will be sent a Return
Authorization form with return instructions. When returning the product for warranty service,
please pack it carefully in the original box with all supplied accessories, and enclose your
original receipt or copy, and a brief explanation of the problem (include RA #).
7. This warranty is valid only in Canada and the continental U.S.
8. This warranty cannot be re-issued.
INTRODUCTION
Congratulations on your purchase of the Levana TW502
Digital Video Baby Monitor! This monitor uses advanced
ClearvuÂŽ digital technology that will deliver a crystal clear
view of your babyâs room no matter where you are in the
house. Feel free to relax and take comfort in knowing that
your child is in good hands with Levana.
TABLE OF CONTENTS
PRODUCT WARRANTY INFORMATION ..................................................................
INTRODUCTION ................................................................................................
FEATURES ........................................................................................................
WHATâS INCLUDED ............................................................................................
BUTTONS AND CONNECTIONS - MONITOR .............................................................
BUTTONS AND CONNECTIONS - CAMERA ..............................................................
SETTING UP YOUR SYSTEM .................................................................................
PLACING THE BABY MONITOR ...............................................................
BATTERY OPERATION ..........................................................................
ATTACHING POWER TO THE CAMERA .....................................................
USING THE RECHARGEABLE BATTERY ....................................................
ATTACHING POWER TO THE CHARGING BASE ..........................................
CHARGING THE MONITOR AND RECHARGEABLE BATTERY .........................
CAMERA OPERATION .........................................................................................
SWITCHING THE CAMERA ON/OFF .........................................................
NIGHT VISION ....................................................................................
MONITOR OPERATION .......................................................................................
SWITCHING THE CAMERA ON/OFF .........................................................
SETTING THE BRIGHTNESS ...................................................................
ADJUSTING THE TEMPERATURE MEASUREMENT .....................................
SWITCHING THE NIGHT LIGHT ON/OFF ...................................................
SWITCHING THE VIBRATION FUNCTION ON/OFF .....................................
ADJUSTING THE VOX SENSITIVITY .........................................................
SELECTING A LULLABY .........................................................................
INTERCOM FEATURE ............................................................................
RANGE ..............................................................................................
ADJUSTING THE VOLUME .....................................................................
PAIRING THE DEVICES .......................................................................................
TROUBLESHOOTING ..........................................................................................
SPECIFICATIONS ...............................................................................................
FCC STATEMENT ...............................................................................................
SAFETY INSTRUCTIONS ......................................................................................
10
10
10
10
11
11
11
12
12
12
13
13
13
13
14
14
15
15
16
16
16
17
18
19
20
20
FEATURES
ClearVuÂŽ Digital Wireless Technology
ClearVuÂŽ technology ensures outstanding image and sound clarity so that
you can watch and listen to your child up to 450ft away. With Levana, youâll
never miss a moment.
Temperature Monitoring to Ensure Safety
Many studies indicate that your babyâs room should be between 61°-68° F (16°-20° C).
This system is equipped so you can monitor the temperature in your babyâs room and
know that they are always safe and comfortable.
Sound-Activated Vibration
This unique feature allows you to monitor your babyâs every sound without any loud
disturbances. Simply turn on the vibrate function and the parent unit will vibrate
whenever any noise is detected in your babyâs room.
Night Vision
The built-in night vision allows you to see your child, even in complete darkness. When
the lights go down the system automatically adjusts to the level of light. With 10ft of
night vision range, the camera can be placed anywhere in your childâs room while still
displaying a precise image of your baby.
Relaxing LED Night Light
The baby unit has a gentle night light that you are able to turn on and off from the parent
unit. Turn the light on if your baby is getting restless to calm them and turn it off when
your baby is asleep, all without going into the babyâs room.
Five Soothing Lullabies
Choose from five different lullabies to sooth your baby to sleep. Turn lullabies on and off
as well as change the song being played all from the parent unit with the simple push of
a button.
Voice Activated Control
Conserve battery power with VOX activation. You have the ability to adjust the level of
sound needed in order for your monitor to turn on. Turn VOX up high if your baby is quieter
or turn it down low at night, so you are only woken when your baby really needs you.
Talk to Baby Intercom
Sooth your baby from a distance with the talk-to-baby intercom. With the simple press of
a button you can let your baby know you are on your way to their nursery or simply talk to
them until they fall back to sleep without having to go into his or her room.
Rechargeable Monitor
When youâre not on the move, simply put your monitor on its base to recharge â no
batteries required! Enjoy up to four hours of continuous audio and video monitoring with
a fully charged unit.
FEATURES
LED Noise Level Indication Lights
The monitor has LED lights on it that light up to display up to five different
levels of sound. This means you can turn the volume all the way down,
relax and still know when and how much noise your baby is making.
All-in-One Table Stand and Belt Clip
The table-stand also functions as a belt clip for ultra usability. With the table stand, place
the monitor upright when you are in the same room or carry the monitor with you and
still have both hands available by using the belt clip.
Energy Efficient Power Adapter
The power adapters save you on power all while saving the environment. They are rated
with a Level V efficiency standard which means they are 30% more energy efficient then
other conventional power adapters.
Wall Mount on Baby Camera for the Best Viewing Angle
The camera can be wall mounted so you can easily view your baby in its crib as well as see
all other parts of the nursery.
24/7 Lifetime Live Customer Support
Our customer support team can be reached by phone 24/7 or by email and live web chat
services, so you always have access to an expert.
WHATâS INCLUDED
BUTTONS AND CONNECTIONS - MONITOR
1. Antenna
Transmits and receives signals
2. Volume Level LEDs
Indicates the amount of sound being heard by the camera
3. Increase Volume and Brightness
Increases the volume through the speaker, and adjusts settings in the menu
4. Decrease Volume and Brightness
Decreases the volume through the speaker, and adjusts settings in the menu
5. ON/OFF Switch
Turns the unit ON and OFF
6. Power LED
Illuminated green when the monitor has power, blinks when there is no
camera detected
7. Microphone
Captures the sound of your voice in intercom mode
8. Charging Base
Place the monitor in the charging base to recharge the battery
9. Play/Pause
Plays or pauses the lullaby playing through the camera
10. Lullaby Selector
Selects the lullaby that the camera will play
11. Talk Button
Enables you to speak through the camera intercom
12. Menu Button
Brings up the menu options
13. VOX LED
Illuminates red when VOX is enabled
(see page 15 for more information)
14. Speaker
Belt Clip and Support Located on Back of Monitor
BUTTONS AND CONNECTIONS - CAMERA
1. Antenna
6. CDS Light Sensor
Transmits and receives signals
Detects the absence of light
and turns on night vision
2. Night Vision IR LEDs
Allows you to see up to 10 feet in 7. Power LED
complete darkness
Indicates that the camera is
powered on
3. Camera Lens
Point at what you would like to view on 8. Power Input
the monitor
Plug the included adapter into
this jack
4. Microphone
Captures all sounds in the babyâs room 9. Temperature Sensor
Reads the temperature and displays it
5. Night Light
on the monitor
Soothe baby to sleep with the built in
night light
10. Battery Compartment
Remove screw to install 4 AAA batteries
(not included) for a completely wireless
system
SETTING UP YOUR SYSTEM
Placing the Baby Monitor
This monitor can be placed on a tabletop or hung from a screw on the wall
above the area being monitored. Place the monitor within ten feet of the area being
monitored for best picture and to ensure that everything will be visible with the IR LEDs on.
1. You can carry the monitor on your belt by turning up the clip on the back of the
monitor.
2. You can also set up the monitor on a tabletop by turning the belt clip down and using
it as a support stand.
Battery Operation
The camera unit can be powered using 4 AAA batteries instead of the included AC adapter.
1. Remove the battery compartment cover on the bottom of the camera base, using a
small phillips (cross) head screwdriver.
2. Place 4 AAA batteries (not included) in the compartment, paying attention to the
labelled polarity markings.
3. Replace the battery compartment cover using the small screwdriver.
Note: The power LED will flash when the battery charge is low.
Attaching Power to the Camera
1. Connect the AC adapter to the transmitter as shown in the diagram.
2. Connect the small end into the DC Jack on the back of the camera, connect the other
end of the adapter into an available wall outlet.
10
SETTING UP YOUR SYSTEM
Using the Rechargeable Battery
1. Turn the belt clip on the back of the monitor unit, upwards.
2. Remove the battery compartment cover by sliding it
down off the back of the monitor
3. Insert the included rechargeable battery, plug the battery
cord in to the small jack on the inside of the battery
compartment.
Attaching Power to the Charging Base
1. Connect the AC adapter to the charging base as shown in the diagram.
2. Connect the small end into the DC Jack on the back of the charging base, connect the
other end of the adapter into an available wall outlet.
3. For safety reasons, use ONLY the adapters included in the package.
Charging the Monitor and Rechargeable Battery
1. To charge the battery in the monitor unit, place the monitor frontwards onto the
charging dock once the power adapter has been attached.
2. The power LED will light up red to indicate that the battery is being charged.
3. For safety reasons, use ONLY the adapters included in the package.
Note: When the battery in the monitor is low battery, the power LED will flash
slowly, recharging the battery will be required shortly after.
11
CAMERA OPERATION
Switching the Camera ON/OFF
Position the camera to view the area you wish to
monitor, angle the camera lens for best view, by
turning it up or down.
1. Slide the power switch
to the ON position.
2. The Power LED on the front of the camera will
light up green. The camera is now ready to
operate.
3. To turn OFF the camera, flip the power switch
back to the OFF position
Note: If you are using batteries to power the camera unit, and it does not start up
when the power switch is in the ON position, you may need to replace the
batteries. The Power LED will flash slowly when the batteries are low power.
Night Vision
The camera is equipped with eight IR (infrared) LEDs. These LEDs, located on the front of
the camera, allow you to see up to ten feet in complete darkness. Allowing you to check
your baby at any time of night.The night vision LEDs will activate automatically when the
camera detects that the light levels are too low.
12
MONITOR OPERATION
Switching the Monitor ON/OFF
1. Press and hold the power button
until you hear two beeps.
2. The LEVANA logo will appear on the screen for a moment followed by the picture
being transmitted.
3. To turn off the unit, press and hold the power button
again for 1 second.
Note: The power LED will flash slowly when the rechargeable battery is low power.
Setting the Brightness
1. Press the menu button
once.
2. The brightness icon
will display on the screen along with the brightness
gauge that will indicated the current set level.
3. Use the up and down buttons
brightness level up and down.
on the left side of the monitor to adjust the
Adjusting the Temperature Measurement
The ideal temperature for a babyâs room is between 16° - 20° celcius or 61° - 68°
fahrenheit. Please set or adjust the room temperature accordingly.
1. Press the menu button
twice.
2. The temperature icon
will display on the screen along with the current status of
the temperature function, either Celcius, Fahrenheit, or OFF.
3. Use the up and down buttons
on the left side of the monitor to turn the
temperature function ON, to display either Celcius or Fahrenheit temperatures, or to
set the temperature function OFF.
13
MONITOR OPERATION
Switching the Night Light ON/OFF
1. Press the menu button
three times.
2. The night light icon
will display on the screen along with the current status of
the function, either ON or OFF.
3. Use the up and down buttons
night light of the camera ON or OFF.
on the left side of the monitor to turn the
Switching the Vibration Function ON/OFF
1. Press the menu button
four times.
2. The vibration icon
will display on the screen along with the current vibration
status that will indicate whether the function is ON or OFF.
3. Use the up and down buttons
vibration function ON or OFF.
on the left side of the monitor to adjust the
Note: When the vibration function is ON, the monitor will vibrate to alert you every
time that sound is detected over a certain level by the camera.
14
MONITOR OPERATION
Adjusting the VOX* Sensitivity
VOX = Voice Operated Transmission = Sound Detection
The VOX function causes the camera to transmit video and audio immediately after a
sound is heard. Once transmission begins, the video will play for 10 seconds if no more
noise is heard. Pressing a button on the monitor will also turn the screen and transmission
ON at any time.
Setting the sensitivity of the VOX function will affect how easily the video will be
transmitted, one bar will require much louder sounds being detected before transmission
will begin, than the five bar setting requires.
1. Press the menu button
five times.
2. The VOX icon
will display on the screen along with the current status of the
function, either OFF or a gauge indicating the current
sensitivity, 1-5.
on the left side of the monitor to turn the VOX
3. Use the up and down buttons
function OFF or adjust the sensitivity up and down. One bar being the lowest and five
bars being the highest sensitivity.
Selecting a Lullaby
1. Press the play/pause button
2. The lullaby icon
will start to play.
on the right hand side of the monitor once.
will appear on the monitor screen, and the last played lullaby
3. Press the lullaby button
lullabies to play.
on the right side of the monitor to select one of five
4. Press the up and down volume buttons
of the music.
during playback to adjust the volume
Note: If no number is displayed beside the lullaby icon, all five lullabies will play
one after another until the play/pause button is pressed again.
15
MONITOR OPERATION
Intercom Feature
This video baby monitor is equipped with a 2-way audio intercom to enable
you to talk to and soothe your baby back to sleep without going into the room.
1. Press and hold the intercom button
in the middle of the front of the monitor.
2. The intercom icon will appear on the monitor screen, and you will be able to speak
and be heard through the speaker in the camera.
3. To stop talking release the intercom button.
Range
1. When the distance between the camera and monitor is too great, the screen will go
, if this happens you will have to move the
black and the range icon will appear
units closer together.
Adjusting the volume
1. In normal monitor operation, you
can press the up and down
buttons on the left hand side of the
monitor to adjust the volume of
the noises you are hearing from the
babyâs room.
16
PAIRING THE DEVICES
The camera and monitor come paired (connected) together. If you do
receive this package and the devices do not automatically connect and
transmit, you may do so manually.
1. Slide the power switch
position.
on the right hand side of the camera to the OFF
2. Cover the light sensor on the front of the
camera with your finger or a cloth.
3. Slide the power switch
camera to the ON position.
on the
4. With the monitor switched on, press and
for
hold the play/pause button
two seconds.
5. The pair icon
will appear on the screen and the power LED on the camera
will blink for a few seconds.
6. Press the menu button
on the monitor to confirm the setting.
7. C1... OK! will appear when the camera and monitor are paired successfully and then
the video and audio will be transmitted automatically.
Note: If âC1...Xâ appears (pair failed) instead of âC1...OK!â you will have to remove all
sources of power from the camera and monitor and start the pairing process
over again.
17
TROUBLESHOOTING
PROBLEM
Equipment does not function
No reception
Reception Interference (static)
SOLUTION
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
â˘
Feedback (screeching, static)
â˘
â˘
Noise
â˘
Picture works but there is no sound â˘
Picture is black and white
â˘
â˘
The rechargeable battery will not
charge
â˘
â˘
â˘
Camera and/or monitor are not
switched on
The battery is dead or defective
The power adapters are not connected
Camera and monitor are not paired
Camera is too far away from monitor
The VOX sensitivity is set too low
The camera and monitor are too far apart
The battery power is too low
Other electronic devices are interfering
with the signal
The camera or monitor are placed near too
many metal objects
The camera and monitor are too close
together
The volume on the monitor is set too high
Battery power is too low
Volume setting is too low
Night vision LEDs are ON
Increase the amount of light in the room
being monitored
The power adapters are not connected
Battery pack is not plugged in inside the
battery compartment
The monitor is not docked properly
Maintenance
â˘
Clean the surfaces of the camera and monitor with a soft, fluff-free cloth
â˘
If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to
not allow water into any openings
â˘
Never use cleaning agents or solvents
18
SPECIFICATIONS
Camera Specifications
Input Power...............................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA
Output Power ............................................................6 VDC ~ 800mA
IR LEDs and Range .....................................................8 LEDs, 10 foot range
Range.........................................................................450 Feet Maximum
Frequency Range .......................................................2.4 GHz
Operable Temperature ...............................................32 Ë F to 104 Ë F (0 Ë C to 40 Ë C)
Transmission Power ................................................... < 20 dBm
Monitor Specifications
Input Power ..............................................................100 - 240 VAC, 50 - 60 Hz ~ 200 mA
Output Power ............................................................6VDC ~ 800mA
Operable Temperature ...............................................32 Ë F to 104 Ë F (0 Ë C to 40 Ë C)
Screen Size ................................................................2.4â
Initial Charging Time .................................................3 Hours
Battery Power Time ...................................................4 Hours
19
)&&$33529('
Any changes
or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
FCC Label Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference
that may cause undesired operation
For baby unit
This equipment complies with FCC radiation exposure limits set forth for uncontrolled
environment .This equipment should be installed and operated with minimum distance
20 cm between the radiator & your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
For parents unit
This equipment complies with FCC radiation exposure limits set forth for uncontrolled
environment. Devices that allow transmissions while worn next to the body using an
accessory are tested with the device and associated accessories in all applicable
orientations, at the minimum separation distance, using a flat phantom, and 1g SAR <
1.6 W/kg. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The manufacturer is not responsible for any radio or TV interference caused by
authority to operate the equipment.
6$)(7<,16758&7,216
Read and Keep Instructions: All the safety and operating instructions should
be read before the video baby monitor is operated.
Water and Moisture:
This product is designed for indoor use only. The unit should not
be place on top of, or beside the product, such as a glass or vase. This item should not be
used near water.
Non-Use Periods: Always unplug the AC adapters from the wall outlets during long
periods of non-use.
16/09/2010 12:47:22 PM
SAFETY INSTRUCTIONS
Ventilation: This baby monitor should not be used on a bed, sofa, rug or
similar surface that may block the ventilation openings, or be placed in an
enclosed area, such as a bookcase or drawer that may impede air flow.
Keep Away from Sources of Heat: This unit should not be exposed to direct heat
sources such as a candle, fireplace, radiator, heat register, stove or other appliance that
emits heat. The unit should not be left in direct sunlight.
Power Source: This unit should only be used with the AC power adapters included in this
package (rated 6V 800mA)
Damage Requiring Service: This unit should be serviced by qualified personnel only
when:
a. Objects have fallen or liquid has been spilled into the product
b. The units have been exposed to rain
c. The units do not appear to operate normally or exhibits a distinct change in
performance
d. The units have been dropped or the enclosure damaged
Caution: This product cannot replace responsible adult supervision of a child. You should
personally check your childâs activity at regular intervals.
STATEMENT ON REGULATION
These units are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
⢠Reorient or relocate the receiving antenna
⢠Increase the separation between the equipment and receiver
⢠Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
⢠Consult the dealer or an experienced radio/TV technician for help
Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio or TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of manufacturer could void the userâs
authority to operate this equipment.
21
3OHDVHYLVLW RU
FRPI
ZZZP\/HYDQD
DQGPXFKPRUH
UPDWLRQ
:DUUDQW\LQIR
SURGXFWVXSSRU
DWLRQ
FRQWDFWLQIRUP
ZQORDGV
XVHUPDQXDOGR
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 7.0 (Windows) Trapped : False Create Date : 2011:08:24 18:10:07+08:00 Metadata Date : 2011:08:30 09:42:13-07:00 Modify Date : 2011:08:30 09:42:13-07:00 Creator Tool : Adobe Illustrator CS3 Thumbnails : Instance ID : uuid:3a3e504e-e348-41be-a971-0af80d52ccb9 Document ID : xmp.did:30A2A0684EBBDF11AF4CE759A83553EC Original Document ID : xmp.did:4C074D1360B3DE11A48BA2414D674142 Rendition Class : proof:pdf History : , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Derived From Instance ID : xmp.iid:2FA2A0684EBBDF11AF4CE759A83553EC Derived From Document ID : xmp.did:60507BEF2590DF11B18AE0A152C71191 Derived From Original Document ID: xmp.did:4C074D1360B3DE11A48BA2414D674142 Derived From Rendition Class : default N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 167.216667 Max Page Size H : 243.416667 Max Page Size Unit : Millimeters Fonts : , , , Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups : Doc Change Count : 39196 Format : application/pdf Title : user manual.pdf Creator : a Page Count : 20 Author : aEXIF Metadata provided by EXIF.tools