Cisco Linksys BEFW11S4V32 Wireless Access Point Router with 4-Port Switch User Manual FCCDOC without Importer frank hung
Cisco-Linksys, LLC Wireless Access Point Router with 4-Port Switch FCCDOC without Importer frank hung
Contents
- 1. DoC Statement
- 2. Users Manual Part 1
- 3. Users Manual Part 2
DoC Statement
service@mail.adt.com.tw
www.adt.com.tw
ADVANCE DATA TECHNOLOGY CORPORATION
FEDERAL COMMUNICATIONS COMMISSION
DECLARATION OF CONFORMITY (DoC)
FOR THE FOLLOWING EQUIPMENT:
PRODUCT NAME: Wireless Access Point Router with 4-Port Switch
MODEL NO: BEFW11S4 V3.2
TRADE NAME: Linksys
IS HEREWITH CONFIRMED AND FOUND TO COMPLY WITH THE REQUIREMENTS OF
CFR 47 PART 15 REGULATION. THE RESULTS OF ELECTROMAGNETIC EMISSION
EVALUATION ARE SHOWN IN THE REPORT NO : RF920218H02
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND,
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THE FOLLOWING LOCAL MANUFACTURER/IMPORTER IS RESPONSIBLE FOR THIS
DECLARATION：
Manufacturer USA Local Representative
Company name:
THE LINKSYS GROUP, INC.To Be Determined.
Address:
17401 Armstrong Ave. Irvine, CA
92614
Contact Person:
Frank Hung
Title:
Product Engineer
Tel/Fax:
Tel:(949)784-1820
Fax:(949)261-8868