Cisco Linksys WMP54GV2 Wireless-G PCI Adapter User Manual

Cisco-Linksys, LLC Wireless-G PCI Adapter WMP54G V2 UG Rev NC

a href="https://usermanual.wiki/Cisco-Linksys" itemprop="url"> Cisco Linksys >

Contents

User Manual 2

Wireless-G Notebook Adapter19Instant Wireless®Series18The Profiles screen (Figure 7-6) lets you save different configuration profilesfor different network setups. You can also import or export profiles. The defaultprofile holds the initial configuration saved when you ran the Setup Wizard.Profile - Name of the connection profile.SSID - The wireless network’s unique name, as set in the connection profile.Profile InformationNetwork Type - The mode of the wireless network currently in use.Transfer Rate - The data transfer rate of the current connection. (In Automode, the Adapter dynamically shifts to the fastest data transfer rate possibleat any given time.)Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature.Connect - To connect to a wireless network using a specific profile, select theprofile,and click the Connect button. Edit - Select a profile, and click the Edit button to change an existing profile. New - Click the New button to create a new profile. See the next section,“Creating a New Profile,” for detailed instructions.Figure 7-6ProfilesSite InformationWireless Mode - The mode of the wireless network currently in use.Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature.MAC - The MAC address of the wireless network’s access point.Surveyed at - The time at which the wireless network was scanned. Refresh - Click the Refresh button to perform a new search for wirelessdevices. Connect - To connect to one of the networks on the list, select the wireless net-work,and click the Connect button. If the wireless network has WEP encryp-tion enabled, you will see the screen shown in Figure 7-5.In the WEP drop-down box, select the type of WEP encryption used by thewireless network: 64-bit, or 128-bit WEP.If the wireless network uses a passphrase, enter the passphrase in thePassphrase field. If the wireless network uses a WEP key, enter the WEP keyin the Key 1 field. Click the OK button to complete the network connection and return to the SiteSurvey screen, or click the Cancel button to cancel the network connection andreturn to the Site Survey screen.On the Site Survey screen, click the X (Close) button in the upper right cornerto exit the WLAN Monitor.Figure 7-5
Wireless-G Notebook Adapter1. On the Profiles screen, shown in Figure 7-6, click the New button to createa new profile.2. When the Create connectionprofile screen appears (Figure7-9), enter a name for the newprofile. Click OK to save theprofile name or click Cancelto return to the previousscreen.3. The Choose a network type screen (Figure 7-10) shows a choice of twowireless modes. Click the Infrastructure Mode radio button if you wantyour wireless computers to communicate with computers on your wirednetwork via a wireless access point. Click the Ad-Hoc Mode radio buttonif you want multiple wireless computers to communicate directly with eachother. Click the Next button to continue or the Back button to return to theprevious screen.Infrastructure Mode - This mode allows wireless and wired networks tocommunicate through an access point.Ad-Hoc Mode - This mode allows wireless-equipped computers to com-municate directly with each other. No access point is used.21Instant Wireless®Series20Figure 7-10Figure 7-9Creating a New ProfileImport - Clickthe Import but-ton to import aprofile that hasbeen saved inanother location.From the screenthat appears(shown in Figure7-7), select theappropriate file,and click theOpen button.Export - To save the profile(s) ina different location, click theExport button. On the screen thatappears (Figure 7-8), directWindows to the appropriate fold-er and click the OK button.Delete - Click the Delete button to delete a profile. Click the X (Close) button in the upper right corner to exit the WLAN Monitor.Figure 7-7Figure 7-8Note: If you have more than one profile, all profiles will be auto-matically selected and exported to the same folder.
Download:
Mirror Download [FCC.gov]
Document ID329387
Application ID3Z3hZ1lisiIe3w0Mq2wuXw==
Document DescriptionUser Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize214.24kB (2678041 bits)
Date Submitted2003-05-30 00:00:00
Date Available2003-05-30 00:00:00
Creation Date2003-05-29 15:25:43
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-05-29 15:26:05
Document TitleWMP54G_V2-UG-Rev_NC.qxd
Document CreatorPScript5.dll Version 5.2
Document Author: rebecca
FCC ID Filing: PKW-WMP54GV2

Navigation menu