Cisco Linksys WSB24-2 Wireless Signal Booster User Manual Manual

Cisco-Linksys, LLC Wireless Signal Booster Manual

Manual

WWW. LINKS YS . C O MA. With your Access Point/Router powered off, place the Wireless SignalBooster on top of the Access Point/Router.B. Disconnect the Access Point’s/Router’s antennas.C. Connect the Signal Booster Cables from the Access Point’s/Router’s anten-na ports to the Wireless Signal Booster’s cable ports.D. Connect the antennas to the Wireless Signal Booster’s antenna ports.E. Connect the appropriate power adapters to both the Access Point/Routerand Wireless Signal Booster.F. Now you are ready to use the Wireless Signal Booster in your wirelessnetwork.Connecting the Wireless Signal Booster toYour Linksys Access Point/RouterQI-WSB24-10/25/02NC BWBMinimum Requirements• One of the following Linksys products:Wireless Access Point, WAP11Wireless Router, BEFW11S4Package Contents• One Linksys Wireless Signal Booster• Two Signal Booster Cables• One Power Adapter• One Quick Installation guideWireless SignalBoosterInstant Wireless®WSB24The Wireless Signal Booster with Access Point CDENote: The images in this document show the Wireless Signal Booster being con-nected to an Access Point; the same directions can be followed when connecting theWireless Signal Booster to a wireless Router.wsb24 quick install-1.qxd 2002/12/11 ¤U¤È 01:14 Page 1
COPYRIGHT & TRADEMARKSCopyright c 2002 Linksys, All Rights Reserved. All other trademarks and brandnames are the property of their respective proprietors.LIMITED WARRANTYLinksys guarantees that every Wireless Signal Booster WSB24 is free from physicaldefects in material and workmanship under normal use for one years from the dateof purchase. If the product proves defective during this warranty period, call LinksysCustomer Support in order to obtain a Return Authorization Number. BE SURE TOHAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. RETURNREQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE.When returning a product, mark the Return Authorization Number clearly on the out-side of the package and include a copy of your original proof of purchase. All cus-tomers outside of the United States of America and Canada shall be held responsi-ble for shipping and handling charges.IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THEPRODUCT FROM DEFECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSE-QUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITSACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS DOES NOTISSUE REFUNDS. WARRANTY DOES NOT COVER NATURAL DISASTERS ORACTS OF NATURE.Linksys makes no warranty or representation, expressed, implied, or statutory, withrespect to its products or the contents use of this documentation and all accompany-ing software, and specially disclaims its quality, performance, merchantability, or fit-ness for any particular purpose. Linksys reserves the right to revise or update itsproducts, software, or documentation without obligation to notify any individual orentity. Please direct all inquiries to :Linksys P.O.Box 18558, Irvine, CA 92623CAUTION : ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVEDIN THIS MANUAL COULD VOID YOUR AUTHORIZATION TO USETHIS DEVICE.This device should be operated at least 2.0m away from any personFCC STATEMENTThe Wireless Signal Booster WSB24 has been tested and found to comply with thelimits for a class B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a resi-dential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interfer-ence to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equip-ment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:—-Reorient or relocate the receiving antenna.—-Increase the separation between the equipment and receiver.—-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—-Consult the dealer or an experienced radio/TV technician for help.Regulatory information / DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance withthe instructions included in the user documentation provided with the product. Anychanges or modifications (including the antennas) made to this device that are notexpressly approved by the manufacturer may void the user’s authority to operatethe equipment. The manufacturer is not responsible for any radio or television inter-ference caused by unauthorized modification of this device, or the substitution of theconnecting cables and equipment other than manufacturer specified. It is the respon-sibility of the user to correct any interference caused by such unauthorized modifica-tion, substitution or attachment. Manufacturer and its authorized resellers or distribu-tors will assume no liability for any damage or violation of government regulationsarising from failing to comply with these guidelines.CAUTION: To maintain compliance with FCC’sRF exposure guidelines, thisequipment should be installed and operated with minimum distance20cm between the radiator and your body. Use on the suppliedantenna. Unauthorized antenna, modification, or attachments coulddamage the transmitter and may violate FCC regulations.MPE Statement (Safety Information)Your device contains a low power transmitter. When device is transmitted it sendsout Radio Frequency (RF) signal.Safety InformationIn order to maintain compliance with the FCC RF exposure guidelines, this equip-ment should be installed and operated with minimum distance 20cm between theradiator and your body.Use only with supplied antenna. Unauthorized antenna, modification, or attachmentscould damage the transmitter and may violate FCC regulations.Caution Statement of the FCC Radio FrequencyExposureThis Wireless LAN radio device has been evaluated under FCC Bulletin OET 65Cand found compliant to the requirements as set forth in CFR 47 Sections 2.1091,2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequency devices.The radiation output power of this Wireless LAN device is far below the FCC radiofrequency exposure limits. Nevertheless, this device shall be used in such a mannerthat the potential for human contact during normal operation-as a mobile or portabledevice but use in a body-worn way is strictly prohibit. When using this device, a cer-tain separation distance between antenna and nearby persons has to be kept toensure RF exposure compliance. In order to comply with the RF exposure limitsestablished in the ANSI C95.1 standards, the distance between the antennas andthe user should not be less than 20cm.Contact InformationFor help with the installation or operation of this product, contact LinksysTechnical Support at one of the phone numbers or Internet addresses below.Sales Information 800-546-5797 (LINKSYS)Technical Support 888-326-7114RMA Issues 949-261-1288Fax 949-261-8868Email support@linksys.comWeb http://www.linksys.comFTP Site ftp.linksys.comwsb24 quick install-1.qxd 2002/12/11 ¤U¤È 01:14 Page 2
WSB24 - color sleeve size A:286mm W x 243mm H x 66mm D)(11.25” W x 9.569” H x 2.613” D)Made In TaiwanInstant Wireless™SeriesModel No. WSB24Instant Wireless™SeriesModel No. WSB24Instant Wireless™SeriesModel No. WSB24Instant Wireless™SeriesModel No. WSB24Instant Wireless™SeriesModel No. WSB24Linksys is a Registered Trademark of The Linksys Group,Inc. Other brands and product names are trademarks orregistered trademarks of their respective holders.Copyright © 2002 Linksys. All rights reserved.• Increases the effective range of yourLinksys 802.11b Access Point orWireless Router• Stronger signal improves throughputby reducing retransmissions• Save on wiring costs—increase yourwireless coverage into hard-to-reachareas• Simple installation—stack, connect,and goSpecificationsModel Number• WSB24Standards• IEEE 802.11bPeak Gain• +14 dBmReceiver Gain• +20 dBm (nomial)TX input power• +5 dBm (min) - +20dBm (max)Connectors• Two RP SMA and Two RP TNC LEDs• Power: Green when power is applied to deviceDimensions (W x H x D)• 7.31" x 1.88" x 6.88” (186 mm x 48 mm x 175 mm)Warranty• 1-Year LimitedBroadband & Wireless NetworkingBroadband & Wireless NetworkingBroadband & Wireless NetworkingWirelessSignal BoosterWirelessSignal BoosterBroadband & Wireless NetworkingIncrease the range of your Wireless LAN!Rev. NC - posted on ftp 10/25/02:New sku per Frank LinPM sign:__ ___Frank LinLinksysWorld Headquarters:17401 Armstrong Ave.Irvine, CA 92614 USAWorld Wide Web http://www.linksys.comEmail sales@linksys.com support@linksys.comLinksys products are available in more than 50 countries, supported by 12 Linksys RegionalOffices throughout the world. For a complete listof local Linksys Sales and Technical Support contacts, please visit our Worldwide Web Site atwww.linksys.comWirelessSignal BoosterWirelessSignal BoosterWirelessSignal BoosterWirelessSignal BoosterWirelessSignal BoosterWirelessSignal BoosterWirelessSignal BoosterWirelessSignal BoosterGHz802.11b2.4Data Rate: 11Mbps

Navigation menu