Cisco Systems 102042 AIR-MPI352 User Manual report
Cisco Systems Inc AIR-MPI352 report
Contents
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 139918 |
| Application ID | GNOpKpkvnukhTKoF0dB0rw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 5.6kB (69962 bits) |
| Date Submitted | 2001-03-12 00:00:00 |
| Date Available | 2001-05-30 00:00:00 |
| Creation Date | 2001-03-12 12:51:14 |
| Producing Software | Acrobat PDFWriter 4.05 for Windows |
| Document Lastmod | 2001-03-12 12:51:35 |
| Document Title | report |
| Document Creator | 2001041venus.doc - Microsoft Word |
360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com 23 MANUAL Certification Report For: Cisco System Document Number: 2001041 Revision 3 Page 40 A P P E N D I X Declarations of Conformity and Regulatory Information This appendix provides declarations of conformity and regulatory information for the Cisco Aironet AIR-MPI352. The following topics are covered in this section: • Manufacturers Federal Communication Commission Declaration of Conformity Statement, page C-2 • Industry of Canada Spectrum Management, page C-3 • Safety Information for the AIR-MPI352, page C-4 • European Community, Switzerland, Norway, Iceland, and Liechtenstein, page C-6 • Declaration of Conformity for RF Exposure, page C-8 Cisco Aironet AIR-MPI352 OL-XXXX-0X C-1 Appendix C Declarations of Conformity and Regulatory Information Manufacturers Federal Communication Commission Declaration of Conformity Statement Manufacturers Federal Communication Commission Declaration of Conformity Statement Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Models: AIR-MPI352 FCC Certification Number: Manufacturer: LDK102042 Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA This device complies with Part 15 rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference. However, there is no guarantee that interference will not occur. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase separation between the equipment and receiver. Cisco Aironet AIR-MPI352 C-2 OL-XXXX-0X Appendix C Declarations of Conformity and Regulatory Information Industry of Canada Spectrum Management • Connect the equipment to an outlet on a circuit different from which the receiver is connected. • Consult the dealer or an experienced radio/TV technician. Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Cisco could void the user’s authority to operate this device. Note The following label must be affixed to the OEM product containing the Cisco Aironet AIR-MPI352 product: This device contains: FCC ID: LDK102042 CANADA: 246 1103 XXXXX Industry of Canada Spectrum Management Canadian Compliance Statement This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Cisco Aironet AIR-MPI352 OL-XXXX-0X C-3 Appendix C Declarations of Conformity and Regulatory Information Safety Information for the AIR-MPI352 The device is certified to the requirements of RSS-210 for 2.4-GHz spread spectrum devices. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. For further information, contact your local Industry Canada office. Safety Information for the AIR-MPI352 The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC certified equipment. Cisco Aironet Mini PCI product meets the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio according to the instructions found in this manual and the hardware and software guides on the Cisco Aironet Series Wireless LAN Adapters CD will result in user exposure that is substantially below the FCC recommended limits. • Do not touch or move the antenna(s) while the unit is transmitting or receiving. • Do not hold any component containing a radio such that the antenna is very close to or touching any exposed parts of the body, especially the face or eyes, while transmitting. • Do not operate the radio or attempt to transmit data unless the antenna is connected; otherwise, the radio may be damaged. • Use in specific environments: – Do not operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is a type especially qualified for such use. – The use of wireless devices in hazardous locations is limited to the constraints posed by the safety directors of such environments. – The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). – The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Cisco Aironet AIR-MPI352 C-4 OL-XXXX-0X Appendix C Declarations of Conformity and Regulatory Information Safety Information for the AIR-MPI352 – In order to comply with FCC RF exposure limits, high gain antennas should be located at a minimum distance of 7.9 inches (20 cm) or more from the body of all persons when used in a mobile or fixed type application. Warning In order to comply with RF exposure limits established in the ANSI C95.1 standards, it is recommended when using a laptop with a PC card client adapter that the adapter’s integrated antenna is positioned more than 7.9 inches (20 cm) from your body or nearby persons during extended periods of transmitting or operating time. If the antenna is positioned less than 7.9 inches (20 cm) from the user, it is recommended that the user limit exposure time. Cisco Aironet AIR-MPI352 OL-XXXX-0X C-5 Appendix C Declarations of Conformity and Regulatory Information European Community, Switzerland, Norway, Iceland, and Liechtenstein European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC Cisco Aironet AIR-MPI352 C-6 OL-XXXX-0X Appendix C Declarations of Conformity and Regulatory Information European Community, Switzerland, Norway, Iceland, and Liechtenstein The Declaration of Conformity related to this product can be found at the following URL: http://www.ciscofax.com. The following standards were applied: • Radio: EN 300.328-1, EN 300.328-2 • EMC: EN 301 489-1, EN 301 489-17 • Safety: EN 60950 The following CE mark is affixed to the AIR-MP1352 equipment: The above CE mark is required as of April 8, 2000 but might change in the future. Cisco Aironet AIR-MPI352 OL-XXXX-0X C-7 Appendix C Declarations of Conformity and Regulatory Information Declaration of Conformity for RF Exposure Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance. Note Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not allowed for use within the European community and countries that have adopted the European R&TTE directive 1999/5/EC and/or the CEPT recommendation Rec 70.03. For more details on legal combinations of power levels and antennas, contact Cisco Corporate Compliance. Declaration of Conformity for RF Exposure The radio module has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This device has been evaluated for for use in portable devices per FCC Part 2.1093 of the rules. A Specific Absorption Rate test was conducted with the various portable antennas listed in the manual per the requirements of FCC Bulletin OET 65C and Industry Canada RSS-102 addressing RF Exposures to Humans. The device operates with in the required limits as set forth for portable devices operating under the part of the rules. The use of any approved high gain antennas will require the system to be operated under the requirements of FCC Part 2.1091 as a mobile or fixed device. The device was evalauted to the more rigid Uncontrolled General Population Limits based on the Maximum Permissible Exposure Study using the most common high gain attennas available it is recommneded that a minimum distance of at least 7.9 inches (20cm) be kept between the system antenna and any person in the general vacinity. Cisco Aironet AIR-MPI352 C-8 OL-XXXX-0X
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2001:03:12 12:51:35-05:00 Create Date : 2001:03:12 12:51:14-05:00 Title : report Creator : 2001041venus.doc - Microsoft Word Producer : Acrobat PDFWriter 4.05 for Windows Page Count : 9EXIF Metadata provided by EXIF.tools