Cisco Systems DX800956 Desktop Telepresence Device User Manual rcsi cdce

Cisco Systems Inc Desktop Telepresence Device rcsi cdce

Contents

Users Manual Compliance Info

 Americas Headquarters:Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USARegulatory Compliance and Safety Information for Cisco DX SeriesThis document provides international agency compliance, safety, and statutory information for Cisco DX Series collaboration desk endpoints.ContentsThis document contains the following sections:•Translated Safety Warnings, page 2•Japanese Electric Appliance and Radio Laws, page 26•Cell Phone Interference Caution, page 26•Using External Devices with Your Cisco DX Series Collaboration Desk Endpoint, page 27•European Directives, page 27•Compliance and Safety Information, page 30•Obtaining Documentation and Submitting a Service Request, page 39
 2Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Translated Safety WarningsThis section repeats in multiple languages the basic warnings appropriate for Cisco DX Series collaboration desk endpoints.Statement 1071—Warning DefinitionWarningIMPORTANT SAFETY INSTRUCTIONSThis warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071SAVE THESE INSTRUCTIONSWaarschuwingBELANGRIJKE VEILIGHEIDSINSTRUCTIESDit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.BEWAAR DEZE INSTRUCTIESVaroitusTÄRKEITÄ TURVALLISUUSOHJEITATämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.SÄILYTÄ NÄMÄ OHJEETAttentionIMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.CONSERVEZ CES INFORMATIONS
 3Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01WarnungWICHTIGE SICHERHEITSHINWEISEDieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.BEWAHREN SIE DIESE HINWEISE GUT AUF.AvvertenzaIMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza  per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONIAdvarselVIKTIGE SIKKERHETSINSTRUKSJONERDette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.TA VARE PÅ DISSE INSTRUKSJONENEAvisoINSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.GUARDE ESTAS INSTRUÇÕES ¡Advertencia!INSTRUCCIONES IMPORTANTES DE SEGURIDADEste símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES
 4Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Varning!VIKTIGA SÄKERHETSANVISNINGARDenna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.SPARA DESSA ANVISNINGAR
 5Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01AvisoINSTRUÇÕES IMPORTANTES DE SEGURANÇAEste símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.GUARDE ESTAS INSTRUÇÕESAdvarselVIGTIGE SIKKERHEDSANVISNINGERDette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.GEM DISSE ANVISNINGER
 6Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01
 7Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 19—TN Power WarningWarningThe device is designed to work with TN power systems.WaarschuwingHet apparaat is ontworpen om te functioneren met TN energiesystemen.VaroitusKoje on suunniteltu toimimaan TN-sähkövoimajärjestelmien yhteydessä.AttentionCe dispositif a été conçu pour fonctionner avec des systèmes d'alimentation TN.WarnungDas Gerät ist für die Verwendung mit TN-Stromsystemen ausgelegt.AvvertenzaIl dispositivo è stato progettato per l’uso con sistemi di alimentazione TN.AdvarselUtstyret er utfomet til bruk med TN-strømsystemer.AvisoO dispositivo foi criado para operar com sistemas de corrente TN.
 8Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 331—Power Supply Installation Warning¡Advertencia!El equipo está diseñado para trabajar con sistemas de alimentación tipo TN. Varning!Enheten är konstruerad för användning tillsammans med elkraftssystem av TN-typ.WarningThe power supply must be placed indoors.WaarschuwingDe stroomtoevoer moet binnen worden geplaatst.VaroitusTehonlähde on sijoitettava sisätiloihin.AttentionLe bloc d’alimentation électrique doit être placé à l’intérieur.WarnungDie Stromversorgungsquelle darf nicht im Freien aufgestellt werden.AvvertenzaL’alimentatore deve essere posto in un luogo interno.AdvarselStrømkilden skal være plassert innendørs.AvisoA fonte de alimentação deve ser instalada no interior.¡Advertencia!El suministro de energía debe estar ubicado en un lugar cubierto y no al aire libre.Varning!Strömkällan måste vara placerad inomhus.
 9Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 353—This Product Must be ConnectedWarningThis product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353WaarschuwingDit product moet worden verbonden met een stroomvoorziening die compatibel is met PoE (power-over-ethernet) IEEE 802.3af of een beperkte stroomvoorziening die compatibel is met IEC60950.VaroitusTämä tuote on liitettävä PoE (power-over-ethernet) IEEE 802.3af -yhteensopivaan virtalähteeseen tai IEC60950-yhteensopivaan rajoitettuun virtalähteeseen.AttentionCe produit doit être connecté à une source d'alimentation électrique par câble Ethernet (PoE) conforme à la norme IEEE 802.3af ou à une source d'alimentation limitée conforme à la norme IEC60950.WarnungDieses Produkt muss entweder an eine Stromquelle angeschlossen sein, die mit dem IEEE 802.3af-Standard Power-over-Ethernet (PoE) kompatibel ist oder an eine Stromquelle für geringe Leistungen, die IEC60950-kompatibel ist.AvvertenzaQuesto prodotto deve essere connesso a una fonte di alimentazione di tipo PoE (power-over-ethernet) conforme a IEEE 802.3af o a una fonte di alimentazione conforme a IEC60950.AdvarselDette produktet må være koblet til en Power-over-Ethernet (PoE) IEEE 802.3af-kompatibel strømkilde eller en IEC60950-kompatibel begrenset strømkilde.AvisoEste produto tem de estar ligado a uma fonte de alimentação compatível com a norma IEEE 802.3af, também conhecida pela sigla Power over Ethernet (PoE), ou a uma fonte de alimentação limitada compatível com a norma IEC60950.¡Advertencia!Debe conectar este producto a una fuente de alimentación sobre ethernet (PoE) conforme con el estándar IEEE 802.3af, o a una fuente limitada conforme con el estándar IEC60950.Varning!Denna produkt måste vara ansluten till en PoE IEEE 802.3af-kompatibel strömkälla eller en IEC60950-kompatibel begränsad strömkälla.
 10Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 378—Read Wall-Mounting Instructions Before InstallationWarningRead the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 378WaarschuwingLees de wandbevestigingsinstructies aandachtig door voordat u met de installatie begint. Het niet gebruiken van de juiste hardware of het opvolgen van de juiste procedures kan resulteren in een gevaarlijke situatie voor mensen en schade aan het systeem.VaroitusLue seinäkiinnitysohjeet huolellisesti läpi ennen työn aloitusta. Mikäli kiinnityksessä ei käytetä oikeanlaisia työkaluja tai ohjeita ei noudateta tarkasti, järjestelmä saattaa aiheuttaa vaaratilanteen tai se voi vaurioitua.AttentionLisez les instructions de montage murale avec attention avant de commencer l'installation. Ne pas utiliser le matériel correct ou ne pas suivre les procédures correctes pourrait donner résultat a une situation dangereuse pour les utilisateurs et endommager le système.WarnungBitte lesen Sie vor Beginn der Installierung die Anleitungen zur Wandmontage sorgfältig durch. Verwendung von inkorrekter Apparatur oder Nichtbefolgung der vorgeschriebenen Methoden kann zur Gefährdung von Personen oder Schaden am System führen.AvvertenzaLeggere attentamente le istruzioni per il montaggio al muro prima di iniziare l'installazione. Un errato uso del corretto hardware o il mancato rispetto delle corrette procedure potrebbe avere come conseguenza una situazione di pericolo per le persone e danni al sistema.AdvarselLes nøye gjennom instruksene om veggmontering før du begynner monteringen. Dersom man ikke bruker riktig maskinvare eller ikke følger riktig framgangsmåte kan det resultere i risiko for personskader og skade på systemet.AvisoLeia com cuidado as instruções de montagem na parede antes de iniciar a instalação. Falha em usar o hardware correto ou em seguir os procedimentos corretos pode resultar numa situação de risco para as pessoas e danos ao sistema.
 11Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1001—Work During Lightning Activity¡Advertencia!Lea atentamente las instrucciones que se encuentran en la pared antes de comenzar con la instalación. Si no utiliza el hardware correcto o no sigue los procedimientos correctos se podría producir una situación peligrosa para las personas y daños al sistema.Varning!Läs väggmonteringsintruktionerna noga innan du påbörjar installationen. Försummelse av att inte använda rätt hårdvara eller att inte föjla korrekt tillvägagångsätt kan resultera i en riskabel situation för människor och kan skada systemet.WarningDo not work on the system or connect or disconnect cables during periods of lightning activity.WaarschuwingTijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. VaroitusÄlä työskentele järjestelmän parissa äläkä yhdistä tai irrota kaapeleita ukkosilmalla.AttentionNe pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage.WarnungArbeiten Sie nicht am System und schließen Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert.AvvertenzaNon lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini.AdvarselUtfør aldri arbeid på systemet, eller koble kabler til eller fra systemet når det tordner eller lyner.AvisoNão trabalhe no sistema ou ligue e desligue cabos durante períodos de mau tempo (trovoada).
 12Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1004—Installation Instructions¡Advertencia!No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas eléctricas en la atmósfera.Varning!Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar.WarningRead the installation instructions before connecting the system to the power source. Statement 1004WaarschuwingRaadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.VaroitusLue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.AttentionAvant de brancher le système sur la source d'alimentation, consulter les directives d'installation.WarnungVor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen.AvvertenzaConsultare le istruzioni di installazione prima di collegare il sistema all'alimentatore.AdvarselLes installasjonsinstruksjonene før systemet kobles til strømkilden.AvisoLeia as instruções de instalação antes de ligar o sistema à fonte de energia.¡Advertencia!Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.Varning!Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten.
 13Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1005—Circuit BreakerWarningThis product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 15A U.S. (240 VAC, 10A international)WaarschuwingDit product is afhankelijk van de installatie van het gebouw voor beveiliging tegen kortsluiting (overstroom). Controleer of de beschermingsinrichting niet meer dan: 120 VAC, 15A U.S. (240 VAC, 10A international) is.VaroitusTämä tuote on riippuvainen rakennukseen asennetusta oikosulkusuojauksesta (ylivirtasuojauksesta). Varmista, että suojalaitteen mitoitus ei ole yli: 120 VAC, 15A U.S. (240 VAC, 10A international)AttentionPour ce qui est de la protection contre les courts-circuits (surtension), ce produit dépend de l'installation électrique du local. Vérifiez que le courant nominal du dispositif de protection n'est pas supérieur à : 120 VAC, 15A U.S. (240 VAC, 10A international)
 14Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01WarnungDieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw. Überstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung nicht mehr als: 120 VAC, 15A U.S. (240 VAC, 10A international) beträgt.AvvertenzaQuesto prodotto dipende dall'impianto dell'edificio per quanto riguarda la protezione contro cortocircuiti (sovracorrente). Assicurarsi che il dispositivo di protezione non abbia un rating superiore a: 120 VAC, 15A U.S. (240 VAC, 10A international)AdvarselDette produktet er avhengig av bygningens installasjoner av kortslutnings (overstrøm)-beskyttelse. Påse at verneenheten ikke er merket høyere enn: 120 VAC, 15A U.S. (240 VAC, 10A international)AvisoEste produto depende das instalações existentes para proteção contra curto-circuito (sobrecarga). Assegure-se de que o fusível ou disjuntor não seja superior a: 120 VAC, 15A U.S. (240 VAC, 10A international)¡Advertencia!Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) del edificio. Asegúrese de que el dispositivo de protección no sea superior a: 120 VAC, 15A U.S. (240 VAC, 10A international)Varning!Denna produkt är beroende av i byggnaden installerat kortslutningsskydd (överströmsskydd). Kontrollera att skyddsanordningen inte har högre märkvärde än: 120 VAC, 15A U.S. (240 VAC, 10A international)120 VAC, 15A U.S. (240 VAC, 10A international)120 VAC, 15A U.S. (240 VAC, 10A international)120 VAC, 15A U.S. (240 VAC, 10A international)120 VAC, 15A U.S. (240 VAC, 10A international)
 15Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1019—Main Disconnecting DeviceWarningThe plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019WaarschuwingDe combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting.VaroitusPistoke/liitinkohta toimii pääkatkaisumekanismina. Pääsy siihen on pidettävä aina esteettömänä.AttentionLa combinaison de prise de courant doit être accessible à tout moment parce qu'elle fait office de système principal de déconnexion.WarnungDer Netzkabelanschluß am Gerät muß jederzeit zugänglich sein, weil er als primäre Ausschaltvorrichtung dient.AvvertenzaIl gruppo spina-presa deve essere sempre accessibile, poiché viene utilizzato come dispositivo di scollegamento principale.AdvarselKombinasjonen støpsel/uttak må alltid være tilgjengelig ettersom den fungerer som hovedfrakoplingsenhet.AvisoA combinação ficha-tomada deverá ser sempre acessível, porque funciona como interruptor principal.¡Advertencia!El conjunto de clavija y toma ha de encontrarse siempre accesible ya que hace las veces de dispositivo de desconexión principal.Varning!Man måste alltid kunna komma åt stickproppen i uttaget, eftersom denna koppling utgör den huvudsakliga frånkopplingsanordningen.
 16Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1021—SELV CircuitWarningTo avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.WaarschuwingOm elektrische schokken te vermijden, mogen veiligheidscircuits met extra lage spanning (genaamd SELV = Safety Extra-Low Voltage) niet met telefoonnetwerkspanning (TNV) circuits verbonden worden. LAN (Lokaal netwerk) poorten bevatten SELV circuits en WAN (Regionaal netwerk) poorten bevatten TNV circuits. Sommige LAN en WAN poorten gebruiken allebei RJ-45 connectors. Ga voorzichtig te werk wanneer u kabels verbindt.VaroitusJotta vältyt sähköiskulta, älä kytke pienjännitteisiä SELV-suojapiirejä puhelinverkkojännitettä (TNV) käyttäviin virtapiireihin. LAN-portit sisältävät SELV-piirejä ja WAN-portit puhelinverkkojännitettä käyttäviä piirejä. Osa sekä LAN- että WAN-porteista käyttää RJ-45-liittimiä. Ole varovainen kytkiessäsi kaapeleita.AttentionPour éviter une électrocution, ne raccordez pas les circuits de sécurité basse tension (Safety Extra-Low Voltage ou SELV) à des circuits de tension de réseau téléphonique (Telephone Network Voltage ou TNV). Les ports du réseau local (LAN) contiennent des circuits SELV et les ports du réseau longue distance (WAN) sont munis de circuits TNV. Certains ports LAN et WAN utilisent des connecteurs RJ-45. Raccordez les câbles en prenant toutes les précautions nécessaires.
 17Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01WarnungZur Vermeidung von Elektroschock die Sicherheits-Kleinspannungs-Stromkreise (SELV-Kreise) nicht an Fernsprechnetzspannungs-Stromkreise (TNV-Kreise) anschließen. LAN-Ports enthalten SELV-Kreise, und WAN-Ports enthalten TNV-Kreise. Einige LAN- und WAN-Ports verwenden auch RJ-45-Steckverbinder. Vorsicht beim Anschließen von Kabeln.AvvertenzaPer evitare scosse elettriche, non collegare circuiti di sicurezza a tensione molto bassa (SELV) ai circuiti a tensione di rete telefonica (TNV). Le porte LAN contengono circuiti SELV e le porte WAN contengono circuiti TNV. Alcune porte LAN e WAN fanno uso di connettori RJ-45. Fare attenzione quando si collegano cavi.AdvarselUnngå å koble lavspenningskretser (SELV) til kretser for telenettspenning (TNV), slik at du unngår elektrisk støt. LAN-utganger inneholder SELV-kretser og WAN-utganger inneholder TNV-kretser. Det finnes både LAN-utganger og WAN-utganger som bruker RJ-45-kontakter. Vær forsiktig når du kobler kabler.AvisoPara evitar choques eléctricos, não conecte os circuitos de segurança de baixa tensão (SELV) aos circuitos de tensão de rede telefónica (TNV). As portas LAN contêm circuitos SELV e as portas WAN contêm circuitos TNV. Algumas portas LAN e WAN usam conectores RJ-45. Tenha o devido cuidado ao conectar os cabos.¡Advertencia!Para evitar la sacudida eléctrica, no conectar circuitos de seguridad de voltaje muy bajo (safety extra-low voltage = SELV) con circuitos de voltaje de red telefónica (telephone network voltage = TNV). Los puertos de redes de área local (local area network = LAN) contienen circuitos SELV, y los puertos de redes de área extendida (wide area network = WAN) contienen circuitos TNV. En algunos casos, tanto los puertos LAN como los WAN usan conectores RJ-45. Proceda con precaución al conectar los cables.Varning!För att undvika elektriska stötar, koppla inte säkerhetskretsar med extra låg spänning (SELV-kretsar) till kretsar med telefonnätspänning (TNV-kretsar). LAN-portar innehåller SELV-kretsar och WAN-portar innehåller TNV-kretsar. Vissa LAN- och WAN-portar är försedda med RJ-45-kontakter. Iaktta försiktighet vid anslutning av kablar.
 18Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1030—Equipment InstallationWarningOnly trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030WaarschuwingDeze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door bevoegd geschoold personeel.VaroitusTämän laitteen saa asentaa, vaihtaa tai huoltaa ainoastaan koulutettu ja laitteen tunteva henkilökunta.AttentionIl est vivement recommandé de confier l'installation, le remplacement et la maintenance de ces équipements à des personnels qualifiés et expérimentés.WarnungDas Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualifiziertem Personal gestattet werden.AvvertenzaQuesto apparato può essere installato, sostituito o mantenuto unicamente da un personale competente.AdvarselBare opplært og kvalifisert personell skal foreta installasjoner, utskiftninger eller service på dette utstyret.AvisoApenas pessoal treinado e qualificado deve ser autorizado a instalar, substituir ou fazer a revisão deste equipamento.¡Advertencia!Solamente el personal calificado debe instalar, reemplazar o utilizar este equipo.Varning!Endast utbildad och kvalificerad personal bör få tillåtelse att installera, byta ut eller reparera denna utrustning.
 19Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01AvisoSomente uma equipe treinada e qualificada tem permissão para instalar, substituir ou dar manutenção a este equipamento.AdvarselKun uddannede personer må installere, udskifte komponenter i eller servicere dette udstyr.
 20Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1040—Product Disposal WarningUltimate disposal of this product should be handled according to all national laws and regulations. Statement 1040WaarschuwingHet uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.VaroitusTämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti.AttentionLa mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent.WarnungDie Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen.AvvertenzaLo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali.AdvarselEndelig kassering av dette produktet skal være i henhold til alle relevante nasjonale lover og bestemmelser.AvisoDeitar fora este produto em conformidade com todas as leis e regulamentos nacionais.¡Advertencia!Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.Varning!Vid deponering hanteras produkten enligt gällande lagar och bestämmelser. AvisoO descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais.AdvarselEndelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler.
 21Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01
 22Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1072—Shock Hazard from InterconnectionsWarningVoltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.  Avoid using such interconnection methods, unless the exposed metal parts are located within a restricted access location and users and service people who are authorized within the restricted access location are made aware of the hazard.  A restricted access area can be accessed only through the use of a special tool, lock and key or other means of security. Statement 1072WaarschuwingVoltages kunnen elektrische schokken veroorzaken in PoE (Power over Ethernet)-circuits als er verbindingen worden gemaakt met blootliggende metalen contactpunten, geleiders of aansluitingspunten die niet zijn geïsoleerd. Gebruik dit type verbinding niet tenzij de blootliggende metalen onderdelen zich bevinden op een locatie met beperkte toegang en de gebruikers en onderhoudstechnici die toegang tot deze locatie hebben, op het gevaar worden gewezen. De locatie met beperkte toegang kan alleen worden geopend met speciaal gereedschap, slot en sleutel of een andere beveiligingsmethode.VaroitusSisäisissä Ethernet (PoE) -virtapiireissä voi olla sähköiskun vaaran aiheuttavia jännitteitä, jos kytkentöihin käytetään eristämättömiä paljaita metalliliittimiä tai -johtimia. Vältä tällaisia kytkentöjä, elleivät paljaat metalliosat ole rajatussa paikassa. Ilmoita valtuutetuille käyttäjille ja huoltohenkilöille vaarasta. Rajattuun alueeseen pääsee käsiksi ainoastaan erityistyökalua, lukkoa ja avainta tai muuta turvallista menetelmää käyttämällä. AttentionLes tensions existant sur les alimentations utilisant la technologie PoE (Power over Ethernet) peuvent constituer un risque d'électrocution si les interconnexions sont effectuées en utilisant des terminaux, conducteurs ou contacts métalliques exposés non isolés. Évitez d'utiliser de telles méthodes d'interconnexion à moins que les pièces métalliques exposées ne se trouvent dans un emplacement d'accès restreint et que les utilisateurs et les responsables du service autorisés dans cet emplacement d'accès restreint ne soient conscients du danger. Une zone d'accès restreint peut être accédée uniquement à l'aide d'une clé, d'un outil et d'un verrou spécial, ou d'autres moyens de sécurité.WarnungBei Power-over-Ethernet-(PoE-)Schaltkreisen besteht u.U. Stromschlaggefahr, wenn Verbindungen unter Verwendung nicht isolierter, freiliegender Metallkontakte, Leiter oder Anschlussklemmen hergestellt werden. Vermeiden Sie das Herstellen solcher Verbindungen, es sei denn, die freiliegenden Metallteile befinden sich an Orten mit beschränktem Zugang, und Personen, die Zugang dazu haben, sind ausdrücklich über diese Gefahr informiert worden. Ein Ort mit beschränktem Zugang ist nur mit Hilfe eines speziellen Werkzeugs, Schloss und Schlüssels oder anderen Sicherheitseinrichtungen zugänglich.AvvertenzaNei circuiti con alimentazione via Ethernet (PoE) possono verificarsi pericoli di scosse elettriche se si creano connessioni con contatti metallici, conduttori o terminali scoperti. Evitare di utilizzare i metodi di connessione sopraelencati a meno che le parti metalliche esposte non si trovino in una zona riservata e gli utenti e il personale di assistenza, che sono autorizzati ad accedere nella  suddetta zona, siano stati messi al corrente del pericolo. È possibile accedere alla zona riservata solamente utilizzando gli appositi elementi di sicurezza.
 23Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01AdvarselI strømkretser med PoE (Power over Ethernet) kan det være spenninger som kan utgjøre støtfare hvis det blir foretatt sammenkoblinger med uisolerte, eksponerte kontakter, ledere eller terminaler av metall. Unngå å bruke slike sammenkoblingsmetoder med mindre de eksponerte metalldelene er i et område med begrenset tilgang, og brukere og servicepersonell som har tilgang til det begrensede området, blir gjort oppmerksom på faren. Et område med begrenset tilgang kan bare åpnes ved hjelp av spesialverktøy, nøkkel eller andre sikkerhetstiltak.AvisoPode haver voltagens que representam perigo de choque em circuitos PoE (Power over Ethernet) se as interconexões forem feitas utilizando-se terminais, condutores ou contatos de metal exposto e sem isolamento. Evite utilizar tais métodos de interconexão a não ser que as partes de metal expostas estejam em um local de acesso restrito e os usuários e o pessoal de serviço com acesso autorizado a este local restrito estejam cientes do perigo. Uma área de acesso restrito só pode ser acessada com o uso de uma ferramenta, fechadura e chave especial ou de outros meios de segurança.¡Advertencia!Puede haber voltajes con riesgo de shock en circuitos de alimentación sobre el cableado Ethernet (PoE), si para las interconexiones se utilizan contactos, conductores o terminales metálicos descubiertos. Evite tales métodos de interconexión, a menos que las partes metálicas descubiertas se encuentren en un lugar de acceso restringido y tanto los usuarios como el personal de servicios en dicho lugar sean conscientes de la existencia de tal riesgo. Sólo se puede tener acceso a una zona de acceso restringido mediante el uso de una herramienta especial, un candado y una llave u otros medios de seguridad.Varning!Det kan finnas spänningar på PoE-kretsarna (Power over Ethernet) som utgör risk för stötar om sammankopplingarna görs med ej isolerade, exponerade kontakter, ledare och/eller terminaler av metall. Undvik att använda sådana sammankopplingsmetoder, såvida inte de exponerade metalldelarna finns i en plats med begränsad åtkomst. Användare och servicepersonal som tillåts inom platsen med begränsad åtkomst måste vara medvetna om risken. Ett begränsat område kan bara nås med ett speciellt verktyg eller lås, en speciell nyckel eller någon annan säkerhetsmetod.
 24Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 1074—Comply with Local and National Electrical CodesWarningInstallation of the equipment must comply with local and national electrical codes. Statement 1074WaarschuwingBij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften. VaroitusLaitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti.AttentionL'équipement doit être installé conformément aux normes électriques nationales et locales.WarnungDie Installation der Geräte muss den Sicherheitsstandards entsprechen.AvvertenzaL'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali.AdvarselInstallasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter.AvisoA instalação do equipamento tem de estar em conformidade com os códigos eléctricos locais e nacionais. ¡Advertencia!La instalación del equipo debe cumplir con las normativas de electricidad locales y nacionales.Varning!Installation av utrustningen måste ske i enlighet med gällande elinstallationsföreskrifter.
 25Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Caution Only use the Cisco specified power supply. Refer to the installation manual provided with this product.Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable. NOM 121 for Mexico for Cisco DX SeriesWarningLa operación de este equipo está sujeta a las siguientes dos condiciones (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
 26Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Japanese Electric Appliance and Radio LawsStatement 371—Power Cable and AC AdapterStatement 372—Wireless LAN ProductsStatement 391—Low-Power Radio Data Communications Systems (ARIB-STD)Cell Phone Interference CautionCaution Using a cell, mobile, or GSM phone, or two-way radio in close proximity to a Cisco DX Series collaboration desk endpoint might cause interference. For more information, refer to the manufacturer's documentation of the interfering device.
 27Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Using External Devices with Your Cisco DX Series Collaboration Desk EndpointThe following information applies when you use external devices with Cisco DX Series collaboration desk endpoints: Cisco recommends the use of good quality external devices (speakers, microphones, and headsets) that are shielded (screened) against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of the following actions: •Move the external device away from the source of the RF or AF signals. •Route the external device cables away from the source of the RF or AF signals. •Use shielded (screened) cables for the external device, or use cables with a better shield (screen) and connector.•Shorten the length of the external device cable.•Apply ferrites or other such devices on the cables for the external device. Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good quality cables and connectors. Caution Caution: In European Union countries, use only external speakers, microphones, and headsets that are fully compliant with the EMC Directive [89/336/EC].European DirectivesThis section contains conformity statements for European directives.Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and LiechtensteinEnglish:This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.[Bulgarian]:[Czech]:
 28Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Dansk[Danish]:Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.Deutsch[German]:Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.Eesti[Estonian]:See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele.Español[Spanish]:Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.[Greek]:Français[French]:Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC.Íslenska[Icelandic]:Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.Italiano[Italian]:Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.Latviski[Latvian]:[Lithuanian]:Nederlands[Dutch]:Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.Malti[Maltese]:Magyar[Hungarian]:Norsk[Norwegian]:Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.Polski[Polish]:Português[Portuguese]:Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.[Romanian]:Acest echipament este in conformitate cu cerintele esentiale  si cu alte prevederi relevante ale Directivei 1999/5/EC.
 29Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01CE MarkFor Cisco DX Series collaboration desk endpoints, the following CE mark and class-2 identifier are affixed to the equipment and packaging:National RestrictionsIn the majority of the EU and other European Countries, the 2.4- and 5-GHz bands have been made available for the use of wireless LANs. Table 1 provides an overview of the regulatory requirements in general applicable for the 2.4- and 5-GHz bands.Note The regulatory limits for maximum output power are specified in eirp. The eirp level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm).The requirements for any country may evolve. Cisco recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs.Slovensko[Slovenian]:Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC.Slovensky[Slovak]:Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív: 1999/5/EC. Suomi[Finnish]:Svenska[Swedish]:Table 1 Overview of Regulatory Requirements for Wireless LANsFrequency Band (MHz) Max Power Level (eirp) (mW) Indoor Only Indoor and Outdoor2400–2483.5 100 X5150–535011. Dynamic Frequency Selection and Transmit Power Control is required in the 5250 to 5350 MHz and 5470 to 5725 MHz frequency range.200 X5470–572511000 X
 30Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Compliance and Safety InformationThis product meets applicable national electromagnetic field (EMF) limits as specified in the regulations for this type of device. The specific information on the values and installation requirements to comply with the regulations can be found in the “Product safety, security, accessibility, and related information” section of the product User Guide as well as in this document.Regulatory ComplianceFor specifics about which standards have been applied, refer to the Declaration of Conformity:Specification DescriptionSafety •UL 60950-1 Second Edition•CAN/CSA-C22.2 No. 60950-1 Second Edition•EN 60950-1 Second Edition•IEC 60950-1 Second Edition•AS/NZS 60950-1EMC •FCC Part 15 (CFR 47) Class B•ICES-003 Class B•EN55022 Class B•CISPR22 Class B•CISPR24•AS/NZS CISPR22 Class B •VCCI Class B •EN55024•KN24•EN 61000-3-2•EN 61000-3-3•EN300386 •EN 60601-1-2•KN22 Class BTelecom (IP Phones) CS-03 - HACFCC Part 68 (HAC)AS/ACIF S004AS/ACIF S040NZ PTC 220 DR
 31Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Industry Standards TIA 810 A/B (model dependent)TIA 920 (model dependent)DSPR Gray Book 2000DSPR Technical Condition Book 2004RRL Notice No. 2005-96RRL Notice No. 2004-42Radio Canada:•RSS-210•RSS-102EU:•EN 300.328•EN50385•EN 301.893Japan:•W5.3-W5.6•5.6GHz WLAN TPS-DFCUSA:•FCC Part 15.247•FCC Part 15.407Caution See “Statement 4043—Caution U-NII Devices are Restricted” section on page 33.•47 CFR Part 2•47 CFR Part 15.401•OET-65Korea:•RRL No. 2006-128•RRL No. 2006-129Taiwan:•LP0002Specification Description
 32Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01DGT Warning Statement for Cisco DX Series Collaboration Desk EndpointsFCC Safety Compliance StatementThe Federal Communications Commission (FCC), with its action in ET Docket 93-62, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC-certified equipment. The Cisco DX Series collaboration desk endpoint meets the uncontrolled environmental limits as stated in OET-65C (01-01) when operated in accordance with the operation guidelines described in this manual. Proper operation of this radio device according to the instructions in this publication will result in user exposure substantially below the FCC recommended limits.The Cisco DX Series collaboration desk endpoint complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be co-located or operated in conjunction with any other antenna or transmitter.
 33Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 4043—Caution U-NII Devices are RestrictedCaution Within the 5.47 to 5.75 GHz band the U-NII devices are restricted to indoor operations to reduce any potential for harmful interference to weather radar at this time. Further no operation in the 5600-5650MHz band is allowed at this time.Manufacturer’s FCC Declaration of Conformity StatementModel: Cisco DX650Manufacturer:  Cisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAStatement 2018—Class B Notice for FCCModifying the equipment without Cisco’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Cisco, including the use of non-Cisco antennas, could void the user’s authority to operate this device.
 34Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 2022—Class B Notice for CanadaThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.CAN ICES-3 (B)/NMB-3(B)Statement 4008—Devices Operating in the 5150–5250 MHz BandThe band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.Statement 4009—Devices Operating in the 5 GHz DFS BandsCaution High-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devicesCanadian Compliance for Cisco DX Series Collaboration Desk EndpointThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Avis de conformité canadien du téléphone Cisco DX SeriesCe dispositif est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement de ce dispositif est autorisé sous réserve des deux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.Canadian RF Exposure StatementThis equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be collocated or operated in conjunction with any other antenna or transmitter.Déclaration d'exposition aux RF canadienneCet appareil est conforme aux limites d’exposition aux rayonnements définies pour un environnement non contrôlé. Les utilisateurs finaux doivent suivre les instructions de fonctionnement spécifiques pour satisfaire la conformité aux expositions RF. Cet émetteur doit être d'au moins 20 cm de l'utilisateur et ne doit pas être co-implantés ou exploités conjointement avec une autre antenne ou émetteur.
 35Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Statement 295—Class B Warning for KoreaStatement 157—VCCI Compliance for Class B EquipmentStatement 355—Telephone Receivers Produce a Magnetic FieldNote Statement 355 applies only to the Cisco IP Phone 7985G.WarningThis is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas.WarningThis is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual. VCCI-BWarningTelephone receivers produce a magnetic field that can attract small magnetic objects such as pins and staples. To avoid the possibility of injury, do not place the handset where such objects may be picked up. Statement 355WaarschuwingTelefoonontvangers produceren een magnetisch veld dat kleine magnetische objecten, zoals spelden of nietjes, kan aantrekken. Leg de hoorn niet ergens neer waar zich dergelijke objecten kunnen bevinden, om verwondingen te voorkomen.
 36Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01VaroitusPuhelimen ympärille muodostuu magneettikenttä, joka vetää puoleensa pieniä magneettisia esineitä, kuten niittejä ja klemmareita. Aseta kuuloke aina paikkaan, jossa kyseisiä esineitä ei ole. Näin vältät loukkaamasta itseäsi.AttentionLes combinés téléphoniques produisent un champ magnétique susceptible d'attirer de petits objets magnétiques tels que des épingles ou des agrafes. Pour éviter tout risque de blessure, ne placez pas le combiné à un endroit où de tels objets peuvent se trouver.WarnungTelefonhörer erzeugen ein Magnetfeld, das kleine magnetische Objekte wie Nadeln und Büroklammern anziehen kann. Um eine Verletzungsgefahr auszuschließen, legen Sie den Hörer nicht in die Nähe solcher Objekte.AvvertenzaI ricevitori telefonici producono un campo magnetico in grado di attrarre piccoli oggetti magnetici quali spilli e punti metallici. Per evitare danni personali, non posizionare il ricevitore accanto a tali oggetti.AdvarselHåndsettet lager et magnetfelt som kan tiltrekke seg små magnetiske objekter som nåler og stifter. For å unngå skade bør du ikke plassere håndsettet der det finnes slike objekter.AvisoOs auscultadores telefónicos produzem um campo magnético que pode atrair pequenos objectos magnéticos como por exemplo alfinetes e agrafos. Para evitar eventuais ferimentos, não coloque o auscultador próximo deste tipo de objectos.¡Advertencia!Los receptores telefónicos producen un campo magnético que puede atraer objetos pequeños, como alfileres o grapas. Para evitar posibles lesiones, no coloque el aparato cerca de objetos de este tipo.Varning!Telefonmottagare genererar magnetfält som kan dra till sig små magnetiska föremål, t.ex. nålar och häftklamrar. Undvik att lägga luren i närheten av sådana föremål.
 37Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Compliance Statement for ArgentinaAdvertenciaNo utilizar una fuente de alimentación con características distintas a las expresadas ya que podría ser peligroso.Warning Statement for BrazilCompliance Statement for BrazilThis section applies only to Cisco DX650.
 38Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01
 39Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01Obtaining Documentation and Submitting a Service RequestFor information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.htmlSubscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)Copyright © 2014 Cisco Systems, Inc. All rights reserved.
 40Regulatory Compliance and Safety Information for Cisco DX SeriesOL-28934-01

Navigation menu