Citizen Systems Japan H04A0 Printer with RFID Transmitter User Manual ALTECH

Download:
Mirror Download [FCC.gov]
Document ID	603596
Application ID	c9XX8r/2qhoTG2TweoPkbw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.26kB (490722 bits)
Date Submitted	2005-11-17 00:00:00
Date Available	2005-11-17 00:00:00
Creation Date	2004-02-20 14:36:48
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2004-02-20 14:42:56
Document Title	ALTECH
Document Creator	Word 用 Acrobat PDFMaker 6.0
Document Author:	DKKAIHATSU1

CONFIDENTIAL
UNDER CONSTRUCTION
User’’ss Manual
CV CS Preliminary Edition
Ver. 1.10
Heiwa Tokei
CONFIDENTIAL
UNDER CONSTRUCTION
In order to use safely –
Please be sure to follow with the instruction!
・ Be sure to read this manual before put the printer in operation. After that, please keep the manual
for the time to reread whenever necessary.
・ Please don't touch, disassemble nor repair any part of the printer other than the part to which this
manual instructs.
● In order to prevent the harm to those who use, or to other persons, and to
the damage to property, the matter surely has to be followed is shown as
follows.
● The level of the harm and damage which is caused by miss operation or
wrong use of the printer without following the instruction is explained as
follows.
Warning
This shows "a possibility of death or a serious damage will be assumed" if
wrong operation is carried out without following this notice.
Caution
This shows "a possibility of undertaking an obstacle, or material damage
will be assumed" if wrong operation is carried out without following this
notice.
This mark is a picture of
"notice" which should be taken care
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
Warning
● The following action has possibilities to make the printer be damaged, broken
down, or heated, and fumed.
So do not carry out by any means, since it becomes the cause of a fire and an
electric shock.
When any damage and/or serious trouble happens, please switch off the printer
and pull out a power plug from a wall socket, and ask supplier for their help.
·
Please don't drop, step on, give strong pressure or a strong shock on the printer.
·
Please don't install the printer in the place where non air flow is and also don't use the printer by
disturbing air flow to/from the printer.
·
Please don't install the printer in the place where gives chemical reactions, such as a laboratory, and
the place where air contains salt and gas.
·
Please do not use the printer other than the specified power supply voltage and frequency.
·
At the time of power cable/interface cable connection and disconnection, please pay special attention
not to move and/or carry the printer with giving weight pressure to the cable.
·
Please don't drop foreign substances, such as a clip and an insect pin, inside in the printer.
·
Please don't plug several power supply leads into a single socket.
·
Please don't spill drinks, such as tea, coffee, and juice, to the printer, or don't blow a insecticide spray
to the printer. When water etc. is spilt, please switch off the printer and pull out a power supply code
from a wall socket, and ask supplier's help.
·
Please don't disassemble nor modify the printer.
● Please keep or throw the bag containing the printer away to the safety place where a hand does not
reach so that a child may not wear. If it is worn, there is fear of suffocation.
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
General notice
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
In use of the printer, please read out "in order to use safely" in advance well and follow with it's
instruction.
Be careful not to drop a clip or a thing like a pin into the printer. It becomes the cause of failure.
Be careful of movement and carrying of the printer enough. If the printer is dropped, there is a
possibility of damaging body and/or anything others.
In opening a cover, please work after opening a cover completely. There is a possibility of a cover
closing and damaging the body etc.
Be careful of a cover when the cover is opened. There is a possibility of damaging the body with
cover edge etc.
Please don't open the printer cover during printing.
When you clean the printer housing, please don't use thinner, trikren, benzine, a ketone liquid agent
nor a chemistry dustcloth.
Please avoid to use the printer in the place with much oil, iron powder, garbage, dust, etc.
Please don't spill a liquid etc. to the printer or don't blow a medicine etc.
Please don't step on the printer, don't drop, don't strike, or don't give a strong shock or strong
vibration.
Be careful in the edge part of sheet metal not to damage your body and anything others.
If abnormal problem occurs while in use of the printer, please stop use immediately and pull out a
power supply plug from a wall socket.
Please don't disassemble the printer at the time of unrecoverable failure, and ask supplier's help.
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
Notice for the installation
1.
In use of the printer, please read out "in order to use safely" in advance well and follow with it's
instruction.
2. Please don't use the printer in the places where temperature is unusually high, such as near the
place with fire or moisture, the place where direct rays hit, a heating instrument, or a heat instrument,
a low place, and a place of high humidity and dusty.
3. Please don't install in a place from which chemical reactions, such as a laboratory, are generated.
4. Please don't install in a place where air contains salt and gas.
5. Please install a printer on the flat and stable table where enough air flow is given. (Please don't
close fan blow off with a wall etc. by any means.)
6. Please don't put anything on the printer.
7. Since it may become the cause of a receiving obstacle if it is used near radio or the television or the
same wall socket is used, be careful.
8. Please don't use the printer other than the specified voltage and frequency.
9. Please don't place anything on power supply cable and don't step on it.
10. Please don't pull nor carry the printer by power supply code or interface cable.
11. Please don't plug several power supply leads into a single socket.
12. Please don't bundle power supply codes for using.
13. Please be sure to catch the plug for extraction and/or insertion of power supply cable.
14. Please be sure to connect and/or disconnect the interface cable only after printer switch off.
15. Please avoid long distance cabling and/or to connect with the equipment having much noises. If
there is no other way, please take sufficient measures to use a shield line, a twisted pair wire, etc.
for every signal line.
16. Please install the printer in such place where the wall socket is near from and it's easy to disconnect
the plug from the wall socket to shut the power supply easily.
17. Please use cable plug with a ground for wall socket.
18. Please use the power supply cable specified.
Please use the cable approved by safe standard of each country.
- Japan
Code set No INQ.1404 (60000990)
Part number
Rating
Plug
CAT-105
125V 12A
Code
HVCTF
1.25mm2 3G
Connector
EF-28
125V 12A
Code set No 5-AB0632 (60001020)
Part number
Rating
Plug
KP-218
125V 12A
Code
VCTF
1.25mm2 3G
Connector
EF-28
125V 12A
- United States, Canada
Code set No INQ.1417 (60000980)
Part number
Rating
Plug
CAT-009
125V 13A
Code
SJT
1.25mm2 3G
Connector
EF-28
125V 13A
Code set No 5-AB0638 (60001010)
Part number
Rating
Plug
KP-30
125V 13A
Code
SJT
1.25mm2 3G
Connector
KS-32
125V 13A
Acquisition standard File No.
JET1806-43001-1002
Formal recognition No.Grade A 12-9193
Formal recognition No.Grade A 41-25445
JET1807-43001-1002
JET2178-12009-1003
JET1807-43004-1005
Acquisition standard File No.
UL: E69228 CSA: LL93534
UL: E69167CSA: LL97391 LL92902
LL42379
UL: E69228 CSA: LL93534
Acquisition standard File No.
UL: E118569 CSA: LR84390
UL: E42955 CSA: LL84512
UL: E118569 CSA: LL84391
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
- Europe
Code set No 764S
(60000960)
Part number
Rating
Plug
203
10 / 16A 250V
Code
H05VV-F
1.00mm23G
Connector
EF-28
250V 10A
Acquisition standard No.
EN60799
EN60799
EN60799
Code set No 764S
(60001030)
Part number
Rating
Plug
KP-4819Y
10 / 16A 250V
Code
H05VV-F(GTCE-3) 1.00mm23G
Connector
KS-31A
250V 10A
Acquisition standard No.
IEC60884
IEC60227-5
IEC60320-1
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
Regulatory compliance statements
American users
FCC part 15
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
■Reorient or relocate the receiving antenna
■Increase the separation between the equipment and receiver
■Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
■ Consult the dealer or an experienced radio/TV technician for help
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment. The antenna used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
Caution: Use shielded cables to connect this computers.
Any changes or modifications not expressly approved by the grantee of this device
could void the users authority to operate the equipment.
Canadian users
ICES-003
This digital does not exceed the Class B limits for radio noise emissions from digital apparatus
as set out in the radio interference regulations of industry Canada.
Le pré’cent appareil numerique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Class B prescrites dans le réglement sur le
brouillage radioélectrique édicte par industrie Canada.
European users
European directives
This information Technology Equipment has tested and found to comply with the following
European directives:
EMC Directive 89/336/ECC amending directive 92/31/ECC & 93/68/ECC as per
EN 50022:1998 Class B
EN 61000-3-2:1995/A1:1998/A2:1998
EN 61000-3-3:1995
EN 50024:1998 according to
EN 61000-4-2:1995 EN61000-4-5:1995
EN 61000-4-3:1996 EN61000-4-6:1996
EN 61000-4-4:1995 EN61000-411:1994
Low Voltage Directive (Safety) 73/23/ECC as per
EN60950:2000 or IEC60950:1999
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
日本のお客様へ／Japanese Users
電波障害について
この装置は、情報処理装置等電波障害自主規制協議会（VCCI）の基準に基づく
クラス B 情報技術装置です。この装置は､家庭環境で使用することを目的としていますが、
この装置がラジオやテレビジョンの受信機に近接して使用されると、受信障害を引き起こす
可能性があります。
取扱説明書に従って正しい取り扱いをしてください。
VCCI statement
This equipment is in the Class B category (information Technology Equipment to be used in
a residential area or an adjacent area thereto) and conforms to standards set by the
Voluntary Control Council for interference by information Technology Equipment aimed at
preventing radio interference in such residential areas. When used near a radio or TV
receiver, it may become the cause of radio interference. Read instructions for correct
handling.
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
Chapter 1 Printer Setup
1.
2.
3.
4.
5.
6.
7.
Please check the contents of supplied
Name of each part
Connect Power cable
Connect Host computer (PC)
The way to set Paper Cut Off Box
Check of Paper and Ribbon
Paper and Ribbon mounting
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
1. Please check the contents of supplied
Please check that the printer and all accessories are packed in without missing.
Printer
Roll Holder Assy
Power Cable
Printer Driver CD
L-Spacer
* Please keep the package box, packing material, etc. for transportation.
Caution
Please be careful to move or carry the printer and/or to take the printer out from packing box.
In case if the printer is fallen down, it’s possible to make damage your body or anything.
When you take the printer out from packing box, please hold bottom of the printer.
Styrene is so weak to be easily broken, and the printer shall be fallen down if styrene is taken up
for taking the printer out from packing box.
* Please set the printer on the place of flat and clean (not dusty).
* Installation at the place of poor air flow or closing air inlet of printer is prohibited.
* Also the place having direct sunshine is prohibited.
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
2. Name of each part
[Front]
Exit of printed paper
Thermal Print Head
Paper Cut Off Box
Open Button
Roll Holder Assy
Ribbon Holder
for Receiver
[Back]
Air Ventilator
Platen Roller
Ribbon Holder
for Supplier
USB Cable Port
Power Switch
Power Supply
Caution
* In opening paper cover, please work after opening completely. Otherwise, there is a possibility of
cover closing, which may damage your body etc.
* Please be careful of cover when the cover is opened. There is a possibility of damaging your body etc
by cover edge etc.
10
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
3. Connect Power Cable
1. Please confirm that the power switch should be OFF.
2. Inserts the connector of power supply cable in the printer’s power supply inlet.
3. Connects the plug of power supply cable in wall socket.
Power supply inlet
Power switch
Caution
* Please use the power cable attached with the printer, and please be sure to ground the grounding terminal of a
plug.
4. Connect the Host Computer (PC)
1. Please confirm that the power switch of the printer and PC should be OFF.
2. Connects the printer and PC by USB cable.
USB Cable Port
USB Cable Port
11
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
5. The way to set Paper Cut Off Box
In the Paper Cut Off Box, cut off of unnecessary pieces of paper are stacked.
Please remove those cut off whenever paper media is changed.
It’s possible to have paper jam if the box is fully stacked.
* Easier way to mount the box is to push upper side of the box in the printer slightly.
Caution
* Please pay attention not to insert your finger or anything in the cutter located in upper side when the cut
off box is taken out, otherwise it’s possible to injure your finger and/or to damage your proprietary.
12
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
6. Check of Paper and Ribbon
Paper
L-Size, 2L-Size
127mm
Type
Post Card, A5 Wide Size
152 mm
Post Card,
A5 Wide Size
L-Size
2L-Size
Ribbon
i-Media
Type
Post Card, A5 Wide Size
159 ㎜
L-Size, 2L-Size
134mm
L-Size, 2L-Size
Post Card, A5 Wide Size
13
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
7. Paper and Ribbon Mounting
1. Opens front case C by pressing the open button.
Open Button
2. Mounts paper on roll holder assy. For L-size and 2L-size, sets L-spacer first.
L-Size, 2L-Size
Post Card, A5 Wide Size
L-Spacer, Roll Holder Assy
Roll Holder Assy
* Please mount paper on roll holder Assy by the same
way with for L-Size and 2L-Size.
* Please insert firmly so as not to be any space
between side of roll and L-spacer.
* For setting the L-spacer, please fit the flat side
of the L-spacer with roll side or
inside.
14
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
3. Installs paper in the printer.
Fits paper to the position of each paper size,
and inserts it to arrow direction until buzzer
makes ‘Pi-Pi’ sound.
(Around the position to dotted line of photo)
LED indicator shall change from Red flicker
to Blue & Red flicking.
* Please pay attention not to feed paper with
deviation nor slanting.
* Please refer [Note] of 5. of next page too.
L-Size, 2L-Size
Post Card, A5 Wide Size
Please insert paper by referring to width guide shown below.
It’s recommended to insert paper after removing paper loosing for easier setting.
15
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
4. Installs ribbon in the printer.
* By paying attention to front & back of ribbon, mount the ribbon core on each supply and receiving side as
shown in below.
* Removes ribbon loosing by turning the ribbon attachment of receiving side approx. 5 times to the arrow
direction.
Please fits color of attachment and
holder of printer.
Ribbon receiving side
(RED)
Ribbon supply side
(BLUE)
Front side from the printer front is for ribbon supply,
and backside is for ribbon receiver.
Winding direction of ribbon
5.Close the front case C.
* When the front case C is closed, paper initialize process shall be taken place.
* In case if power is OFF when paper is installed, paper initialize is not taken place.
16
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
Chapter 2 Trouble Shoot
1.
2.
3.
4.
Error Indication
If Paper is jammed
If Ribbon is cut out
If power was shut down during printing
17
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
1. Error Indication
Status
Online
Front Cover Open
Paper End
Ribbon End
LED Indication
━━━━━━━━━━
━━━━━━━━
━━━━
━━━━ ━ ━
━━━━ ━ ━ ━
Solution
Printer ready
Please close front cover
Please set paper correctly
Please set new paper
Please set new ribbon
※1
※2
※2
※1 When paper is set at right position, buzzer sounds ‘Pi-Pi’.
※2 Please exchange both paper and ribbon same time together.
Head Cooling Down
Paper Error
Ribbon Error
System Error
━━ ━━ ━━━━
━ ━
━ ━ ━
━━━━━━━━━━
Released automatically when cooled down
Please set paper correctly again
Please set ribbon correctly again
Please switch off & on again
※3
※3 If System Error is not recovered, please contact with support center.
･ For further details, please refer to User’s Manual of the system.
18
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
2. If Paper is jammed
1.
Please open the front case C by pressing the open button.
2.
Please pull paper out, and cut damaged part straightly and clearly with correct angle, then insert again.
Paper edge cutting
○
×
If paper edge is not cut correctly, trouble shall be occurred in quality, paper feed.
19
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
3. If Ribbon is cut out
1. Please open the front case C by pressing the open button.
2. Please remove paper of which print is interrupted by ribbon error from the printer.
3. Ties ribbon by cellophane tape.
4. Mount ribbon in the printer and turns ribbon several times until cellophane tape disappears.
Ties by cellophane tape
4. If power was shut down during printing
1. If power is shut down during printing, the front case C is locked to open .
2. Please power ON again and when LED shows Blue, opens the front case C. (Approx. 10 sec)
3. Paper of which print is interrupted shall be rest in the printer, and please pull it out and cut straightly and
clearly, and set in correct position again.
Caution
* Please don’t shut power down during printing without fail.
20
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
Chapter 3 After Care
1. Platen Roller Cleaning
2. Thermal Print Head Cleaning
3. Filter Cleaning
21
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
1. Platen Roller Cleaning
Please wipe off powder, garbage, adhesive agent, etc, which comes from ribbon and/or paper
and adhering to the platen roller, by ethyl alcohol permeate soft cloth.
[Note]
Please do not use benzene, thinner or anything other than ethyl alcohol without fail,
since it’s possible to invade resin.
Please clean by turning the
platen roller.
Caution
* Prior to cleaning, please power OFF the printer and unplug power code without fail.
2. Thermal Print Head Cleaning
In case if defocused white line or quality loss is found in printed image, there is possibility of
dirt of print head by powder, garbage, adhesive agent, etc, which comes from ribbon and/or
paper and adhering to the print head.
In the case, please wipe the thermal print head surface by dry, 8000-grid polishing sheet
approx. 5 times.
[Note]
Please do not use alcohol, benzene, thinner nor sandpaper without fail.
Caution
* Prior to cleaning, please power OFF the printer and unplug power code without fail. Otherwise, there is
possibility to be injured by sudden head moving.
* Temperature of the thermal print head just after printing is high. So, please wait sometimes for cooling
the head temperature down.
22
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
3. Filter Cleaning
Please clean filter from time to time or periodically.
1.
2.
3.
4.
Please open the front case C by pressing the open button.
Removes the filter cover.
Use a brush or cleaner to remove dust and debris from the filter.
Reinstall the filter with the filter cover up to the cover is hooked completely.
[Note]
If the filter is very dirty, you may want to rinse it with clean water, but you must
not reinstall the filter in the printer until it’s thoroughly dry.
Otherwise, water shall give damage on the printer.
* It’s important to keep the filter be clean always.
* In case if the filter is stopped up, temperature of
printer inside becomes higher, and printing shall be
suspended by showing Blue LED flicking.
* In the case, printing shall be restarted automatically
soon after temperature becomes down, but this
influences on speed wrongly.
* Similar situation may occurs when the print head is
heated up by continuous high power such like by
printing of many black images.
Caution
* Prior to cleaning, please power OFF the printer and unplug power code without fail.
23
Heiwa Tokei MFG.CO.,LTD.
CONFIDENTIAL
UNDER CONSTRUCTION
Appendix
1. Specification
Item
Model
Print Technology
Resolution
Gray Scale
Interface
Paper
Ribbon
General Specification
Specification
ＣＶ
Dye Sublimation
334dpi(Paper Feed direction) x 600dpi (TPH width direction)
Yellow, Magenta, Cyan 256 steps each
USB2.0 (Max. 480Mbps)
Buffer size for A5 Wide Size x 2 images
Roll paper, Coreless
YMC + Overcoat
Dimensions
322W x 350D x 276H (mm)
Weight
20Kg (Printer hardware only)
Power
AC100V – 240V 50/60Hz
Consumption Max. 400VA
Temperature 5 degree C to 35 degree C with natural air
Operation
Humidity 35 to 80% with no moisture nor dew
conditions
Stock
conditions
Accessories
Media
Items / Paper Type
Paper Size
mm
Print Area
mm
Print Speed
Sec / Sheet
Paper Capacity Sheet
Temperature –20 degree C to 60 degree C
Humidity 5 to 85% with no moisture nor dew
Power cable, Printer driver CD, User’s manual
L-Size
127 x 89
130 x 92
Approx. 9.8
450
Post Card
152 x 101
155 x 105
Approx. 11.3
400
2L-Size
127 x 178
130 x 181
−
230
A5 Wide
152 x 229
155 x 232
−
180
24
Heiwa Tokei MFG.CO.,LTD.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 25
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9aedb4fe-9efa-4463-908d-3c67bee2f4d5
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : 電子機器部開発課
Source Modified                 : D:20040220053623
Headline                        : 
Create Date                     : 2004:02:20 14:36:48+09:00
Creator Tool                    : Word 用 Acrobat PDFMaker 6.0
Modify Date                     : 2004:02:20 14:42:56+09:00
Metadata Date                   : 2004:02:20 14:42:56+09:00
Document ID                     : uuid:f16cbdb0-1857-4a29-b1a9-2da5e0f17e90
Version ID                      : 2
Format                          : application/pdf
Title                           : ALTECH
Creator                         : DKKAIHATSU1
Subject                         : 
Tagged PDF                      : Yes
Author                          : DKKAIHATSU1

EXIF Metadata provided by EXIF.tools