ClarIDy Solutions HNM001 HF RFID Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1028068
Application ID	KzyPU10175gK+ET2XHgO4A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	166.53kB (2081651 bits)
Date Submitted	2008-11-10 00:00:00
Date Available	2008-11-10 00:00:00
Creation Date	2008-09-12 10:40:02
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2008-11-07 16:13:20
Document Title	Microsoft Word - ClarIDy HF RFID USB Reader User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	user

ClarIDy HF RFID Reader
ClarIDy HF RFID USB Reader
User’s Manual
M/N: HNM001
Version: A.2
2008-08-15
ClarIDy Solutions, Inc.
1/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Copyright Notice
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
No part of this document may be reproduced without the prior written permission of ClarIDy Solutions, Inc.
Disclaimer
The information of this document is subject to change without notice and does not represent a commitment on any part
of ClarIDy Solutions, Inc.
Trademarks
Microsoft, Windows, Visual Studio, .NET Framework, and CSharp (C#) are registered trademarks of Microsoft
Corporation.
All other product names are trademarks or registered trademarks of their respective owners.
2/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Change Log
Revision
Date
Author
Description
A.1
2008.07.21.
Andy Chen
Create the ClarIDy HF RFID Demo Program User’s
Manual.
A.2
2008.08.15.
Horng-Ji Chen
Change the control panel and add NFC file transfer
functions.
3/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Table of Contents
1. Introduction .................................................................................................................. 5
2. Installation ................................................................................................................... 6
2.1 Setup the USB Driver .................................................................................................................... 6
2.2 Setup the Demo Program .............................................................................................................. 8
3. Demo Program Operation Guide ............................................................................... 12
3.1 Configuration Control ................................................................................................................... 12
3.2 Inventory and Stop Controls ........................................................................................................ 14
3.3 Block Data Control ....................................................................................................................... 14
3.4 NFC Control ................................................................................................................................. 17
2.5 Disconnect Control ...................................................................................................................... 19
4/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
1. Introduction
This document describes the demo program (ClarIDy_HF_Demo.exe) for ClarIDy HF RFID
Reader. The demo program provides configuration controls, “Inventory”, “Block Data”, and “NFC”
functions. User can use this application to control the ClarIDy HF RFID Reader to communicate
with ISO14443A, ISO14443B, ISO15693, and Sony FeliCa RFID tags. ClarIDy HF RFID Reader
also provides NFC (Near Field Communication” functions to have contactless file transfer
capability. The operational procedures are described as the following chapters.
5/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
2. Installation
2.1 Setup the USB Driver
First time using the ClarIDy’s HF FRID Reader (USB Interface), you must install the driver
(RFIDUSBDriver.exe).
Please directly connect the ClarIDy HF RFID Reader to the USB port of the computer, or use the
UHF entension cable to connect both ClarIDy HF RFID Reader and the USB port of the
computer. The Windows system will detect the ClarIDy HF RFID Reader as a new device and
popup the device driver setup dialog. Please ignore and close it.
Execute the RFIDUSBDriver.exe step by step as the following figures:
1. Click “Next” from the “Installing RFID USB Driver” dialog, as figure 1.
2. Click “Next” while the “Destination Folder” was specified, as figure 2.
3. Click “Finish” to finalize the installation of the RFID USB device driver, as figure 3.
4. The console window will show the installation information, as figure 4.
Figure 1
6/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 2
Figure 3
7/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 4
2.2 Setup the Demo Program
Execute the Setup.exe step by step as the following figures:
1. Click “Next” from the “ClarIDy HF Setup” dialog, as figure 5.
2. Click “Next” while the “Select Installation Folder” was specified, as figure 6.
3. Click “Next” on the “Confirm Installation”, as figure 7.
4. System will show the “Installing ClarIDy HF Demo” as figure 8. While the “Installation
Complete” was shown, click “Close” to finish the installation, as figure 9.
8/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 5.
Figure 6.
9/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 7.
Figure 8.
10/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 9.
11/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
3. Demo Program Operation Guide
The following sections will describe the usage of the ClarIDy HF Demo application.
3.1 Configuration Control
The main form on the left hand side is the configuration control of the ClarIDy HF RFID
Reader, as figure 10. User can use this form to configure the operational environment of the
Reader.
Figure 10. Configuration Control
The initial state of the Reader is “Disconnected”. You can select the “USB” type and a port
number such as “0” to open the USB port by clicking the “Connect” button. If the USB port
opened successfully, then the “Status” will be changed to “Connected” and the version number
will be shown, see figure 11. Also, user can select tag protocols that will be used to run the
program. The reading speed will be faster for only one protocol is selected. Here we will only
select “ISO 15693” type, we unchecked the “ISO 14443A”, “ISO 14443B” and “FeLiCa” check
boxes, figure 12.
12/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 11. Connect to the reader
Figure 12. Change Protocols.
13/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
3.2 Inventory and Stop Controls
Place the “RFID tag in the RF field (less than 4 cm on top of the reader) of the ClarIDy HF
RFID Reader. Click “Inventory” button to read the tag UID, see figure 13. The unique tag ID
(“UID”), number of reads (“Count”), and protocol will be shown on the table. Click “Stop” button to
stop it. You can clear the result by clicking the “Clear” button.
Figure 13. Inventory, Stop and Clear Controls
3.3 Block Data Control
“Block Data” is used to read/write ISO15693 Tag’s block data.
There are four options for ISO15693 Tag.
Normal: This is the default mode.
Option Flag Enabled: If this has checked, the Option Flag (Bit 7) of the ISO 15693
defined Request Flags will be set to 1. Some tags Write commands that Option
Flag must be set to 1. Ex: TI Tag.
Secure: When password has been written into the tag, please checked the
“Secure” and Input the Password to “PWD”.
14/19
Fujitsu_Fast Mode: For Fujitsu tag fast mode.
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 14. Block Data Control
Note: To access tag data, you must get the tag UID first, figure 15.
Figure 15. Block Data Control (Get UID)
15/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Read Block Data
After the Tag UID is identified, you can click the “Read All” button to retrieve all block data in
the tag’s memory, see figure 16. If the system pops up the dialog as figure 17, suppose the tag
information could not be accessed properly, enter the “Block Count” such as 27, and “Size
(Bytes)” such as 4 for the ISO 15693 tag and click “Read All” again. If the error message still
occurred, reduce the “Block Count” and try again.
Figure 16. Block Data Control (Read All)
Figure 17. Read all block data from the tag’s memory.
16/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader

 Write Block Data
After retrieving the data from the tag’s memory, user can change the contents with the
“Write” function. You can change the block data values in the grid cells, input the “From” & “To”
values (means: from block-3 to block-3) and click the “Write” button to write the new values into
the tag’s memory, see figure 18.
Figure 18. Update data of block-3 by “Write” function.
3.4 NFC Control
To do the NFC control, there should have two ClarIDy HF RFID Readers. Execute two
“ClarIDy HF Demo” programs. Connect both of them by “Port” 0 and “Port” 1 with “USB” Type
respectively. Specify one ClarIDy HF RFID Reader to do the “Send” process as figure 19 and the
other to do the “Receive” process as figure 20. Define the “FilePath” on the “Receive” side and
click “Receive” button for receiving. Define the “FileName” on the “Send” side and click “Send” to
start sending file data.
17/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
Figure 19. NFC Control on Send Side.
Figure 20. NFC Control on Receive Side.
If the file data was sent successfully, the transfer status will show “Send Success” on the Send
18/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
ClarIDy HF RFID Reader
side. If the file type is “jpg” and receiving successfully, the transfer status will show “Receive
Success”, and will display the received image on the Receive side, figure 21.
Figure 21. NFC Control to display image file.
3.5 Disconnect Control
Click “Disconnect” button to close the reader connection and USB communication, see
figure 22. The “Disconnect” button will be disabled and the “Connect” button will be enabled after
then.
Figure 22. “Disconnect” control.
19/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority
to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : user
Create Date                     : 2008:09:12 10:40:02Z
Modify Date                     : 2008:11:07 16:13:20+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : user
Title                           : Microsoft Word - ClarIDy HF RFID USB Reader User Manual.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2008:11:07 16:13:20+08:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:61554372-313a-476e-8d85-1dc8a81d06dd
Instance ID                     : uuid:ca2a581f-537a-478d-be96-8c59fb1f43a9
Page Count                      : 20

EXIF Metadata provided by EXIF.tools