Clarity A Division of Plantronics W425 900MHz 40 Channel Analog Cordless Phone User Manual Final manual

Download:
Mirror Download [FCC.gov]
Document ID	287214
Application ID	2nyStl2AFF5rmGiAiP7B0w==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.36kB (267045 bits)
Date Submitted	2002-12-04 00:00:00
Date Available	2002-12-04 00:00:00
Creation Date	2002-11-06 11:01:54
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2002-11-06 11:05:52
Document Title	Final manual
Document Creator	QuarkXPress(tm) 4.1
Document Author:	vivian Lai

Walker Ameriphone
A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-552-3368
www.mywalker.com
Rev.1 (10-02)
900 MHz Cordless Telephone
with Clarity® Power™ Technology
Model W425 Owners Manual
Ñ
Ç
Table of Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
W425 Features . . . . . . . . . . . . . . . . . . . . . . . . . .6
Connecting Your Telephone . . . . . . . . . . . . . . . . . .10
Choosing a Location . . . . . . . . . . . . . . . . . . . . . . .10
Desktop Installation . . . . . . . . . . . . . . . . . . . . . . . .11
Wall Mount Instructions . . . . . . . . . . . . . . . . . . . . .12
Handset Battery Charging . . . . . . . . . . . . . . . . . . .13
Operating Your Telephone . . . . . . . . . . . . . . . . . . . . . . . .14
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Memory Storage . . . . . . . . . . . . . . . . . . . . . . . . .18
Making and Receiving Calls . . . . . . . . . . . . . . . . . .19
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
FCC Requirements and Regulations . . . . . . . . . . . . . . . . . .22
Warranty and Service . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Important Safety Instructions
When using your telephone equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the telephone.
3. Do not use this telephone near a bathtub, wash
basin, kitchen sink or laundry tub, in a wet
basement, near a swimming pool or anywhere
else there is water.
4. Avoid using a telephone (other than a cordless
type) during an electrical storm. There may be a
remote risk of electrical shock from lightning.
5. Do not use the telephone to report a gas leak in
the vicinity of the leak.
6. Unplug this telephone from the wall outlets before
cleaning. Do not use liquid cleaners or aerosol
cleaners on the telephone. Use a damp cloth for
cleaning.
7. Place this telephone on a stable surface. Serious
damage and/or injury may result if the telephone
falls.
8. Do not cover the slots and openings on this
telephone. This telephone should never be placed
near or over a radiator or heat register. This
telephone should not be placed in a built-in
installation unless proper ventilation is provided.
9. Operate this telephone using the electrical
voltage as stated on the base unit or the owner’s
manual. If you are not sure of the voltage in your
home, consult your dealer or local power company.
10. Do not place anything on the power cord. Install the
telephone where no one will step or trip on the cord.
11. Do not overload wall outlets or extension cords
as this can increase the risk of fire or electrical
shock.
12. Never push any objects through the slots in the
telephone. They can touch dangerous voltage
points or short out parts that could result in a risk
of fire or electrical shock. Never spill liquid of
any kind on the telephone.
13. To reduce the risk of electrical shock, do not take
this phone apart. Opening or removing covers
may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
14. Unplug this product from the wall outlet and refer
servicing to the manufacturer under the following
conditions:
A. When the power supply cord or plug is
frayed or damaged.
B. If liquid has been spilled into the product.
C. If the telephone has been exposed to rain
or water.
D. If the telephone does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions. Improper
adjustment may require extensive work by
a qualified technician to restore the
telephone to normal operation.
E. If the telephone has been dropped or the
case has been damaged.
F. If the telephone exhibits a distinct change
in performance.
15. Never install telephone wiring during a lightning
storm.
16. Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
17. Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
18. Use caution when installing or modifying
telephone lines
19. Use only the power cord and batteries indicated in
this manual. Do not dispose of batteries in a fire.
They may explode. Check with local codes for
possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Safety Instructions for Batteries
Caution: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type recommended by
the manufacturer. Dispose of batteries
according to the manufacturer's instructions.
1. Use only the approved battery pack
in the handset of your cordless phone.
For Handset Unit: 3.6 V 700mAHr
NiCd Rechargeable Battery
GP70AAS3BMJZ
GPI International Ltd
2. Do not dispose of the battery in
a fire as it may explode. Check with
local codes for possible special
disposal instructions.
3. Do not open or mutilate the battery.
Released electrolyte is corrosive and
may cause damage to the eyes and
skin. It may be toxic if swallowed.
4. Exercise care in handling
batteries in order not to short the
battery with conducting materials
such as rings, bracelets and keys.
The battery or conduction material
may overheat and cause burns.
5. Charge the battery (ies) provided
with or identified for use with this
product only in accordance with the
instructions and limitations specified
in this manual.
6. Observe proper polarity orientation
between the battery pack and the
battery charger.
Important Safety Instructions
The following items are included as part of
the CS-03 Requirements. The standard
connecting arrangement code for the
equipment is CA11A. This product meets the
applicable Industry Canada technical
specifications.
NOTICE: The Canadian Department of
Communications label identifies certified
equipment. This certification means that the
equipment meets certain telecommunications
network protective operational and safety
requirements. The Department does not
guarantee that the equipment will operate to
the user’s satisfaction. Before installing this
equipment, users should ensure that it is
permissible to be connected to the facilities
of the local telecommunications company.
The equipment must also be installed using
an acceptable method of connection. In
some cases, the company’s inside wiring
associated with a single line individual
service may be extended by means of a
certified connector assembly (telephone
extension cord). The customer should be
aware that compliance with the above
conditions may not prevent degradation of
service in some situations. Repairs to
certified equipment should be made by an
authorized Canadian maintenance facility
designated by the supplier. Any repairs or
alterations made by the user to this
equipment, or equipment malfunctions, may
give the telecommunications company cause
to request the user disconnect the equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility, telephone
lines and internal metallic water pipe system, I
if present, are connected together. This
precaution may be particularly important in
rural areas. Caution: Users should not
attempt to make such connections themselves,
but should contact the appropriate electric
inspection authority, or electrician, as
appropriate. The Ringer Equivalent Number
is an indication of the maximum number of
termianls allowed to be connected to a
telephone interface. The termination on an
interface may consist of any combination of
devices subject only to the requirement that
the sum of the Ringer Equivalent Number of
all the devices not exceed five.
SAVE THESE INSTRUCTIONS
Getting Started
8. Flash Button (FLASH)
9. Mute Button (MUTE)
10. Redial/Pause Button (RD/P)
11. Temporary Tone Button (*)
12. Ringer On/Off
13. Boost Clarity Power On/Off
14. Volume Dial
15. Belt Clip
W425 FEATURES
1.
2.
3.
4.
5.
6.
7.
Antenna/Handset Visual Ringer
Dial Pad
Charge Contacts
Channel Button (CH)
Talk Button (TALK)
Memory Button (MEM)
Emergency Memory Storage Buttons
BOOST
CLARITY
POWER
13
ABC
DEF
GHI
JKL
MNO
11
PQRS
TUV
FLASH
MUTE
RD/P
10
WXYZ
RINGER
15
MEM
OFF ON
VOLUME
14
TALK
CH
12
Getting Started
W425 FEATURES
1.
2.
3.
4.
5.
6.
7.
Visual Ringer
Charging Contacts
Handset Tab
Base Antenna
In Use/Charge LED (GREEN)
Power LED (RED)
Page
POWER
PAGE
IN USE/
CHARGE
Getting Started
W425 FEATURES
1.
2.
3.
4.
5.
Pulse/Tone
BOOST On/Off
AC Adapter Jack
Telephone Line Jack
Desk/Wall Mounting Bracket
USE ONLY WITH CLASS TWO POWER SOURCE
PULSE/TONE
BOOST
ON/OFF
DC 9V
500mA
TEL
Getting Started
W425 FEATURES
1. Ringer On/Off
2. Volume Up/Down
3. Ring Style
RING
ER O
FF O
VOLU
ME
RING
ST
YLE
Getting Started
CONNECTING YOUR TELEPHONE
CHOOSING A LOCATION
1. Carefully remove your cordless
telephone from its box. If there is
any visible damage, do not attempt
to operate this equipment. Return it
to the place of purchase.
1. This phone requires a modular
phone jack (RJ11) and a standard
120-volt outlet.
2. Plug the AC adapter directly into
outlet.
3. Do not plug other appliances into
outlet or have outlet controlled by
a wall switch.
4. Chose a location that is out of the
way of normal activities
2. Check to be sure that you have all
items that come with your W425
telephone. You should have a
HANDSET, BASE UNIT, AC ADAPTER,
MOUNTING BRACKET, 6 INCH AND
6 FOOT TELEPHONE LINE CORD,
BELT CLIP and OWNERS MANUAL.
If at any time you have questions about
your W425 please contact our Customer
Service Department at:
1-800-552-3368 or 423-622-7793
10
CAUTION: Always connect the AC
adapter to the phone before you
connect it to the AC power. When
you finish, disconnect the AC power
before you disconnect it from the
phone.
Getting Started
DESKTOP INSTALLATION
Follow these instructions to place the
base on a desk or table top using the
supplied bracket.
1. Insert the bracket’s tab into the
base’s upper tab slots in the
direction of DESKTOP marked on
the bracket, then press down on
the bracket’s clips and insert them
into the clip slots.
2. Plug one end of the supplied
modular telephone line cord into
the TEL jack located on the back
of the base of the phone.
7. Lift the base’s antenna to a
vertical position.
8. Set the TONE/PULSE switch
located on the back of the base
to correct dialing mode. Please
check with your local Phone
Company if uncertain of the
type of service.
9. Place handset in the cradle to
begin initial charging.
Remember, you must charge
the phone for at least 12 hours
before you use the phone for
the first time.
3. Plug the modular telephone line
cord’s other end into a modular
phone jack.
4. Insert the supplied AC adapter’s
plug into the jack marked DC 9V
500mA located on the back of
the telephone base.
USE ONLY WITH CLASS TWO POWER SOURCE
PULSE/TONE
BOOST
ON/OFF
DC 9V
500mA
TEL
5. Route the adapter’s cord through
the strain relief slot on the bracket.
6. Plug the adapter into a standard
AC power (electrical) outlet.
11
Getting Started
WALL MOUNTING INSTRUCTIONS
The base unit may be mounted on a
standard wall plate.
1. With the back of the unit facing
up insert the supplied mounting
bracket’s tabs into the base’s
lower tab slots in then direction
of WALL MOUNT marked on the
bracket, then press down on the
brackets clips and insert them
into the clip slots.
2. Plug one end of the supplied short
modular telephone line cord into
the TEL jack located on the back
of the base of the phone.
3. Insert the plug of the AC adapter
into the jack marked DC 9V
500mA located on the back of
the telephone base.
4. Route the adapter’s cord through
the narrow groove located on the
back of mounting bracket to
secure the cord.
12
5. Plug the short modular telephone
line cord into the wall plate jack,
then align the mounting bracket’s
keyhole slots with the wall plate
studs and slide the base of the
phone downward to secure it on
the wall.
6. Plug the adapter into a standard
AC power (electrical) outlet.
7. Press and lift out the handset
holder tab, turn it around so the
narrow tab end extends out and
slide back into its slot. This will
hold the handset in the cradle
when the phone is wall mounted.
8. Lift the base’s antenna to a
vertical position.
9. Set the TONE/PULSE switch
located on the back of the base to
correct dialing mode. Please
check with your local Phone
Company if uncertain of the type
of service.
10.Place handset in the cradle to
begin initial charging.
Remember, you must charge the
phone for at least 12 hours
before you use the phone for the
first time.
Getting Started
HANDSET BATTERY CHARGING
BATTERY LIFE
The battery in the handset must be fully
charged for 12 hours before using the
telephone for the first time.
Talk Time: 4 hours
Standby: 8 days without usage
1. Place the handset in the base.
The CHARGE LED on the base
will light green.
2. After the batteries are fully
charged, check for dial tone by
pressing TALK on the handset.
3. When the handset battery gets
low, there will be 2 beeps every
30 seconds and the TALK button
will flash. If the battery becomes
low while you are on a call, you
will be disconnected after about
two (2) minutes. Terminate the
call and recharge the battery.
To recharge battery pack, place the
handset in the base. The unit can charge
in the base unit either face up or face
down. If charging in the face up position,
the belt clip must be removed so the
handset will connect with the charging
contacts in the base.
1. Make sure the contact points are
touching and the CHARGE LED is
lit.
2. Be careful not to short battery
with conducting materials such
as rings, bracelets and keys.
Actual amounts will vary depending on
the amplifier settings used.
Replace battery every two (2) years.
REPLACEMENT BATTERIES
The W425 uses a 3.6Volt 700mAhr
NiCd Rechargeable 3 cell (AA Type)
battery. It can be replaced with
RadioShack Battery Part Number
23-298.
1.
2.
3.
4.
Remove battery cover.
Install new battery.
Close battery cover.
Charge for 12 hours before first use.
BATTERY
CONNECTOR
BATTERY
PACK PLUG
BATTERY
COMPARTMENT
COVER
BATTERY
13
Operating Your Telephone
FEATURES
Clarity® Power™ Technology
With the Clarity Power feature the high
frequency sounds are amplified more
than the low frequency sounds so that
words are not just louder, but clearer
and easier to understand.
Boost Clarity Power On/Off Button
The W425 has a BOOST CLARITY
POWER button that controls the loudness
of the receiver. Once the BOOST
CLARITY POWER button is pressed, an
extra level of amplification is added over
the entire range of the volume control.
The default state of this button is
determined by the BOOST switch (back
of base of unit, see below). During a
call, the BOOST CLARITY POWER button
can toggle the Clarity Power function on
or off according to the user’s needs.
The TALK button will light ORANGE to
indicate the CLARITY POWER feature is
activated.
WARNING: When the TALK button is lit
ORANGE volume may be at a high level.
To protect hearing, lower the volume
control to minimum before using.
14
Volume Dial
The dial controls the level of volume the
handset and headset receive. The volume
dial provides up to 15 dB of volume
before the BOOST CLARITY POWER button is
activated. Once the button is pressed, the
W425 will provide up to 30 dB of gain.
Boost On/Off Switch
This switch will disable the reset feature
of the BOOST CLARITY POWER button
as follows:
ON- When the BOOST ON/OFF switch
is set to “ON”, the Boost function will be
ON every time a call starts, and will
default to ON every time the phone
hangs up for more than 5 seconds.
During a call, the BOOST CLARITY POWER
button can toggle the Clarity Power ON
or OFF according to the user’s needs.
OFF- When the BOOST ON/OFF switch
is set to “OFF”, the Boost function (Clarity
Power) will be OFF every time a call
starts, and the user will need to press the
BOOST CLARITY POWER button in order
to gain the extra level of amplification.
The phone will retain the current state of the
amplification (Clarity Power ON or OFF) if
the phone hangs up for less than 5 seconds.
This feature will allow the user to make
Operating Your Telephone
multiple calls in quick succession without
having to press the BOOST CLARITY
POWER button at the beginning of every
call. If the phone hangs up for over 5
seconds, the Clarity Power will reset to
OFF. During a call, the BOOST CLARITY
POWER button can toggle the Clarity
Power function on or off according to the
user’s needs.
Ringer Controls
Ringers and ringer controls are located in
both the handset and the base of the
W425.
Handset Ringer
Set the switch marked RINGER ON/OFF
located on the side of the handset. The
ringer switch must be set to ON for the
handset to ring signaling an incoming
call.
NOTE: If both handset and base
ringer’s are set to OFF, the visual
ringer will flash to indicate there is
an incoming call.
Visual Ringer
Visual ringers are located in both the
handset antenna and the base of the
telephone. When an incoming call is
received, these lights will flash. The
handset visual ringer will be lit when
the phone is in use.
OFF
GER
RIN
ON
Base Ringer
The base ringer includes ringer volume
and ring style adjustments located on the
side of the base of the telephone. Adjust
the volume of ring by pressing the
VOLUME UP or DOWN switch until the
desired ring volume is achieved. There
are six (6) levels of volume available.
The style of ring or cadence can also be
adjusted by pressing the RING STYLE
button. Six (6) styles are available
allowing you to customize your ring.
The ringer will sound for 2 seconds
while choosing a ringer style, to allow
the user to make a choice.
RING
ER O
FF O
VOLU
ME
RING
ST
YLE
15
Operating Your Telephone
Headset/Neck Loop Jack
A 2.5 mm jack is located on the top of
the of the telephone handset that can be
used in conjunction with a headset.
While in headset mode, the volume of
headset is controlled by the telephone.
The same 2.5 mm jack can be used for
neck loops, in conjunction with an
adapter to the 3.5 mm jack.
Ordering a Headset
In the event you wish to purchase a
headset for your W425, please
contact Plantronics at 1-800-5444660 for location near you. We
recommend using the Plantronics
M110 headset.
Flash
The FLASH button is activated to use
custom calling services such as Call
Waiting or Three Way Calling. Please
contact your local telephone company for
information on these services.
Mute
The MUTE button allows the user to conduct
a private conversation that you do not
want the person on the other end to
hear. While in the mute mode, the TALK
16
button will become RED and the
microphone in the handset is disabled.
Pressing the MUTE button again will
disengage the MUTE feature.
Redial/Pause
The RD/P button operates both the last
number redial and the pause feature.
Last Number Redial
The last number dialed (up to 32
digits) is stored in the redial memory
until another number is dialed.
To Use this Feature
1. Press the TALK button.
2. When you hear the dial
tone, press the RD/P button.
3. The phone will automatically
dial for you.
Pause Feature
A four (4) second pause may be
inserted into the speed dialing of
the telephone numbers. Press the
RD/P button at the required point
during storage of a number into
memory.
Operating Your Telephone
Lighted Key Pad
The key pad will light for fifteen (15)
seconds after removing from the base
when there is an incoming call. To
reactivate the feature while in standby or
in use, press any key.
Page / Handset Locator
To send a page signal from the base to
the handset, press the PAGE button located
on the base of the telephone. A series of
rings will sound from the handset.
To locate the handset if it is away from
the base, press and hold the PAGE button
for approximately five (5) seconds. A
series of rings will sound for approximately
sixty (60) seconds. Return the handset to
the base or press the TALK button to
cancel the page.
40 Channel Operation
The W425 cordless telephone
automatically searches and selects the
clearest of 40 channels when it is being
used.
Security Code
The security code prevents your cordless
phone conversations from being
accessed by a phone on a different line.
Once the handset battery is fully
charged, the handset will automatically
select the code from over 65,000
combinations. The code is changed
every time the handset is placed in the
cradle.
If you have trouble with placing or
receiving calls, a lost security code may
be the cause of the problem. When this
occurs, the handset can no longer
communicate with the base. Reset by
placing the handset on the base for 5-10
seconds. If that does not work, unplug
the AC adapter from the wall outlet.
Disconnect the handset battery for 5-10
seconds, and then reconnect. Place
handset back on the base and then
reinsert the AC adapter.
Hearing Aid Compatibility
The handset has a special coil inside
of it to couple the sound to hearing aids
equipped with T-Switches/T-Coils.
17
Operating Your Telephone
MEMORY STORAGE
Emergency Storage Buttons
Three emergency buttons are located on
the handset. These storage buttons can
be programmed with numbers of up to
16 digits.
Memory Storage Locations
The W425 also has 10 indirect or two
touch memory locations on the telephone
(0-9) that can be programmed to dial
frequently called numbers of up to 16
digits.
To Store numbers into memory
1. Press the MEM button.
2. Dial the number you wish to store.
3. Press the MEM button again.
4. Press either the emergency button
or the number on the dial pad that
you wish to store the number to.
5. A long beep will indicate the
programming process is complete.
During the memory storage process the
TALK button will flash GREEN. In the
event of a power outage memory is
retained of at least six (6) hours.
18
To Change a Number Stored into Memory
Replace a stored number by programming
a new number in its place.
To Delete a Number Stored into Memory
1. Press and release the MEM
button.
2. Press the * key once for each digit
in the number you are deleting.
3. Press the MEM button again.
4. Press the button for the memory
location you want to delete the
number from.
Operating Your Telephone
MAKING AND RECEIVING PHONE CALLS
Placing a Phone Call
1. Press the TALK button. (TALK button
will illuminate GREEN)
2. Dial the number you wish call.
3. Adjust the rotary Volume Control to
desired level.
4. Press the Clarity Power Button
(activates the Clarity Power Technology)
to gain the extra level of amplification,
if needed.
Refer to BOOST CLARITY POWER
ON/OFF and BOOST ON/OFF for
additional information on volume controls.
To Dial from Memory
1. Press the TALK button.
2. Press the MEM button.
3. Press the number on the dial pad
where the desired number has been
stored.
4. The call will automatically dial.
5. Adjust volume and Clarity Power as
needed.
To use a TONE service on a Pulse Line
1. Dial the number you wish to call
2. When the call is answered, press the * L
key. Additional numbers you dial are
sent as tone signals.
3. After completing the call, press TALK
or return the handset to the base. The
phone will automatically reset.
Receiving a Call
Handset in Base of Telephone
1. Lift the handset.
a. Do not press TALK. You
will automatically be
connected.
Handset out of Base
1. Press the TALK button.
Ending a Call
Place the handset in the base cradle or
press the TALK button to disconnect the line.
Note: When placing or receiving a call, the
handset visual ringer will lite, indicating the
phone is in use.
To Dial From Emergency Storage Location
1. Press the TALK button.
2. Press the desired emergency button.
3. The call will automatically dial.
4. Adjust volume and Clarity Power as
needed.
19
Troubleshooting
The Unit Will Not Operate/No Dial Tone
• Verify the TALK Button is lit.
• Verify the AC adapter is securely
plugged into the base and the
telephone.
• Verify the telephone line cord is
securely plugged into the wall
jack and the telephone.
• Make sure the base antenna is in
an upright position.
• Make sure the handset battery is
fully charged.
• Verify the telephone is in the
correct dialing mode, tone (touch)
or pulse (rotary).
• Make sure you are in the usable
range of the base station.
• Reset the security code by placing
the handset in the base for 5-10
seconds.
The Phone Does Not Ring When You
Receive a Call
• Make sure the RINGER switch on
the handset and base are set to
ON.
• Verify the AC adapter is securely
plugged into the base and the
telephone.
• Verify the telephone line cord is
securely plugged into the wall jack
and the telephone.
20
• Make sure you are in the usable
range of the base station.
• You may have too many extensions
on your line. Try unplugging a few
devices.
Noise, Static, Interference or Other Calls
Heard while Using the Handset
• Try changing channels.
• Make sure the base antenna is in
an upright position.
• Make sure you are in the usable
range of the base station.
• Make sure the handset battery is
fully charged.
• Try relocating the base unit to
another location.
• Make sure the AC adapter is not
plugged into the wall outlet with
other appliances.
• Try relocating the base unit to
another location.
Phone Will Not Hold Charge
• Make sure the charging contacts
on the handset and base are free
of dust and dirt.
• Clean the contacts with a soft cloth.
• Make sure CHARGE LED on the base
is lit when handset is in the cradle.
If necessary, replace the handset
battery. (See Handset Battery Charging)
Troubleshooting
Difficulty in Placing or Receiving Calls
• Move closer to the base and try
again.
• If moving closer does not work,
you may have lost the security
code.
• Reset code by placing the handset
back on the base for 5-10
seconds. (See Security Code
Section)
• Make sure you have selected the
correct dialing mode, tone or
pulse.
• Make sure the AC adapter is not
plugged into a wall outlet with
other appliances.
• Disconnect for 5-10 seconds then
reconnect. Place the handset back
on the base and reinsert the AC
adapter.
• Make sure the handset battery is
fully charged.
21
Federal Communications Commissions Requirements
FCC Part 68 Information
This equipment complies with Part 68 of FCC
Rules and the requirements adopted by the
ACTA. The FCC Part 68 Label is located on the
BASE UNIT of the telephone. This label contains,
among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this
information must be provided to your telephone
company.
Connection to the network should be made using
standard modular telephone jacks, USOC type
RJ11C. The plug and/or jacks used must comply
with comply with FCC Part 68 Rules and
requirements adopted by the ACTA.
The REN is useful in determining the quantity of
devices that you may connect to your telephone
line and still allow these devices to ring when
your telephone number is called. Excessive RENS
on a telephone line may result in the devices not
ringing in response to an incoming call. In most
areas, but not all, the sum of the RENs for all
devices that you may connect to your line should
not exceed five (5.0). To be certain of the
number of devices that you may connect to your
line, you should contact your local telephone
company. The REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point.
If this telephone equipment, the telephone,
causes harm to the telephone network, the
telephone company will notify you in advance
that temporary discontinuance of service may be
required. But, if advance notice isn’t practical,
the telephone company will notify the customer
as soon as possible. Also, you will be advised of
22
your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures
that could affect the proper functioning of your
equipment. If they do, you will be notified in
advance in order for you to make the necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this unit, for repair
or warranty information, please contact customer
service at the phone number listed in the
Warranty section. If the equipment is causing
harm to the network, the telephone company may
request that you disconnect the equipment until
the problem is resolved.
DO NOT DISASSEMBLE THIS EQUIPMENT. It does
not contain any user serviceable components.
Connection to party lines is subject to tariffs.
Contact the state public utility commission, public
service commission or corporation commission for
information.
If your home has specially wired alarm equipment
connected to the telephone line, please ensure
that the installation of this equipment does not
disable alarm equipment by consulting your
telephone company or a qualified installer.
This equipment is hearing aid compatible.
We recommend the installation of an AC surge
arrester in the AC outlet to which this equipment
is connected. The telephone companies report
that electrical surges, typically lightning transients,
are very destructive to customer terminal equipment
connected to AC power sources.
Federal Communications Commissions Requirements
Part 15 of FCC Rules Interference Information
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Your W425 has been tested and found to
comply with the limits of a Class B digital device,
pursuant to Part 15 of FCC rules. These limits are
designed to provide reasonable protection
against harmful interefence in residential
installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation; if this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
you are encouraged to try to correct the
interference by one of the following measures:
3. Connect the telephone equipment
into an outlet on a circuit difference
from that to which the television,
radio, or other receiver is connected.
4. Consult the dealer or an experienced
radio/TV technician for help.
CAUTION: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the user’s
authority to operate the equipment.
THE PARTY RESPONSIBLE FOR PRODUCT
COMPLIANCE
Walker, A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
Telephone: 800.552.3368
1. Where it can be done safely,
reorient the receiving television or
radio antenna.
2. To the extent possible, relocate the
television, radio or other receiver
with respect to the telephone
equipment. (This increases the
separation between the telephone
equipment and the receiver.)
23
Warranty & Service
The following warranty and service information
applies only to products purchased and used
in the U.S. and Canada. For warranty
information in other countries, please contact
your local retailer or distributor.
Limited Warranty
Walker, a division of Plantronics, Inc.
(“Walker”) warrants to the original consumer
purchaser that, except for limitations and
exclusions set forth below, this product shall
be free from defects in materials and
workmanship for a period of one (1) year
from the date of original purchase
(“Warranty Period”). The obligation of
Walker under this warranty shall be at
Walker’s option, without charge, of any part
or unit that proves to be defective in material
or workmanship during the Warranty Period.
Implied Warranties
Under state law, you may be entitled to the
benefit of certain implied warranties. These
implied warranties will continue in force only
during the warranty period. Some states do
allow limitations on how long an implied
warranty lasts, so the above limitation may
not apply to you.
Incidental or Consequential Damages
Neither Walker nor your retail dealer or
selling distributors has any responsibility for
any incidental or consequential damages
including without limitation, commercial loss
or profit, or for any incidental expenses,
expenses, loss of time, or inconvenience.
Some states do not allow exclusion or
limitation of incidental or consequential
damage, so the above limitation or exclusion
may not apply to you.
Exclusions from Warranty
This warranty applies only to defects in factory
materials and factory workmanship.
Any condition caused by accident, abuse,
misuse or improper operation, violation of
instructions furnished by Walker, destruction
or alteration, improper electrical voltages or
currents, or repair or maintenance attempted
by anyone other than Walker or an authorized
service center, is not a defect covered by this
warranty. Telephone companies manufacture
different types of equipment and Walker
does not warrant that its equipment is
compatible with the equipment of a particular
phone company.
24
Other Legal Rights
This warranty gives you specific legal rights
and you may also have other rights which
vary from state to state.
How to Obtain Warranty Service
To obtain warranty service, please prepay
shipment and return the unit to the appropriate
facility listed below.
Warranty & Service
In the United States
Walker Service Center
4289 Bonny Oaks Drive, Suite 106
Chattanooga, Tennessee 37406
Tel. (423) 622-7793 or
(800) 552-3368
Fax: (423) 622-7646 or
(800) 325-8871
6. Reason for return and description
of the problem.
Damage occurring during shipment is
deemed the responsibility of the carrier,
and claims should be made directly with
the carrier.
In Canada
Plantronics Service Center
1455 Pitfield Boulevard
Saint-Laurent
Quebec H4S 1G3
Tel: (800) 540-8363
(514) 956-8363
Fax: (514) 956-1825
Please use the original container, or pack
the unit(s) in a sturdy carton with
sufficient packing material to prevent
damage. Include the following information:
1. A proof-of-purchase indicating
model number and date of purchase.
2. Bill-to address.
3. Ship-to address.
4. Number and description of units
shipped.
5. Name and telephone number of
person to call, should contact be
necessary.
25

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2002:11:06 11:05:52+08:00
Create Date                     : 2002:11:06 11:01:54+08:00
Title                           : Final manual
Author                          : vivian Lai
Creator                         : QuarkXPress(tm) 4.1
Producer                        : Acrobat Distiller 4.0 for Macintosh
Page Count                      : 26
Mod Date                        : 2002:11:06 11:05:52+08:00
Creation Date                   : 2002:11:06 11:01:54+08:00
Metadata Date                   : 2002:11:06 11:05:52+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools