Classic Tech Development HP2291-001T 2.4GHz Wireless Digital Transmitter User Manual SP1390 manual

Classic Tech Development Ltd 2.4GHz Wireless Digital Transmitter SP1390 manual

Users Manual

Download: Classic Tech Development HP2291-001T 2.4GHz Wireless Digital Transmitter User Manual SP1390 manual
Mirror Download [FCC.gov]Classic Tech Development HP2291-001T 2.4GHz Wireless Digital Transmitter User Manual SP1390 manual
Document ID523851
Application IDPrU5xDsrEkX/KETgQdPN0g==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize41.86kB (523268 bits)
Date Submitted2005-03-10 00:00:00
Date Available2005-03-10 00:00:00
Creation Date2005-03-14 12:06:42
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2005-03-14 12:06:42
Document TitleMicrosoft Word - SP1390 manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Chiney

SP1390
2.4GHz Digital Wireless Speakers
User’s Manual
Please read before using the equipment.
Please visit www.promowide.com for details.
INTRODUCTION
This 2.4G digital wireless speakers system uses latest wireless technology that
enables you to enjoy music and TV sound anywhere inside or outside your home.
You can simply connect the system to any audio source such as Radio, TV, VCR,
Hi-Fi and i-Pod/CD/MP3/VCD/DVD player. Without complicated wiring and
installation with your Audio/Video equipments and rear channel amplifier, the
system enables you to enjoy thrilling, lifelike sound in minutes.
FEATURES
1.
2.4G Digital technology.
2.
Digital technology lets you roam freely throughout anywhere at your house.
3.
Purely digital sound travels freely through walls, floors, ceiling, etc.
4.
Operating distance up to 100 feet in open area.
5.
No line of sight limitation.
6.
Virtually interference free audio quality.
7.
Auto tuning control for the best reception.
8.
8-channels Auto Frequency Searching System.
9.
Smart interfaces connected with i-Pod, MD, CD, MP3, Hi-Fi, TV, etc.
COMPONENT IDENTIFICATION
TRANSMITTER
CHANNEL BUTTON
POWER ON/OFF BUTTON (BLUE LED)
P.1
SPEAKER RECEIVERS
INSTALLATION
TRANSMITTER
1. Connect the supplied AC/DC power adaptor to an electrical wall outlet.
2. Plug the AC/DC power adaptor in the DC jack located on the rear of the
transmitter.
3. Plug in the AC adapter and press on the “Power” button, the blue POWER LED
illuminates. If the blue POWER LED does not illuminate, make sure the adapter
is plugged in.
4. You can connect different kinds of audio devices, such as i-Pod, MP3 or MD to
the transmitter by the audio cord provided.
P.2
SPEAKER RECEIVERS
1. Insert 6 pieces ‘AA’ size ALKALINE batteries into the battery compartment with
correct polarity at the back of each speaker (batteries not included in the
package) or connect the 12V power adaptor to the DC input jack on the back of
each speaker, then plug them to the wall AC outlet.
2. Tune the On/Off button of the speakers to ON position and adjust the volume
level. The POWER LED at the front will light up in green. Switch off the
speakers by tuning the ON/OFF button to OFF position, the LED will become
off.
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with.
2. The best channel out of 8 channels on the transmitter will be automatically
selected for the best performance.
3. Turn on the ON/OFF button on the speakers. Press
the “CHANNEL” button to get the best channel in the
speakers if you find any bad reception.
4.
You can adjust the volume to your desired listening
level by tuning the volume button.
P.3
5. You should now be able to place your speakers freely from room to room
without disruption. Should there is any disruption (signal cuts off or carries
distortion), press the speaker’s “CHANNEL” button to maximize the best
reception.
If you could still hear the interference, press the “CHANNEL” button on the
transmitter as well.
When transmitting / receiving over long distances, the signal from the system will
become weaker.
This device must be used with the AC/DC adapters supplied in the package.
TROUBLE SHOOTING
NO SOUND
Ensure the AC/DC adaptor is fully inserted into the AC outlet and the
power connection input on the transmitter.
Ensure the speakers are ON.
Speaker’s battery capacity is too low, replace with new batteries or
connect the AC/DC adaptor to the speaker.
Ensure the TV or audio component is ON.
The connected audio / video equipment is not playing. Start playing the
equipment.
The volume of speakers are too low, adjust the volume to an appropriate
level.
DISTORTED
Press the “CHANNEL” button on the speakers.
If there is still interference, press the “CHANNEL” button on the
transmitter until matching the frequency of the speaker.
Battery capacity is too low. Replace with the new battery.
Ensure the volume levels of speakers are adjusted properly.
The speakers are too far away from the transmitter, move it closer.
The input level of the audio signal is too high. Turn down the volume of
the audio source equipment.
P.4
TECHNICAL SPECIFICATIONS
Transmission Mode
UHF
Carrier Frequency
2.4G Digital
Operation Voltage
Transmitter, DC 9V 150mA
6 X ‘AA’ size Alkaline batteries for each speaker
(not included) or DC 12V 600mA adaptors
(included)
Frequency Response
20Hz – 20KHz
Distortion
0.5%
S/N Ratio
80dB (typical)
Channel Separation
65dB (Typical)
Operation Distance
Up to 100 feet in open area
Output Power
2.5 Watts per channel
NOTE:
1. Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
Installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
P.5
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
1.1 FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired
operation.
P.6
LIMITED WARRANTY
PARAGON PRODUCTS INTERNATIONAL INC. (The Company) warrants to the
original retail purchaser of this product that should this product proven to have
defects in materials or workmanship for a period of one year from the date of
purchase, Paragon will repair such defects or replace this product with one of
similar features and price, without charge for parts and repair labor. Any product
which has been subject to misuse, improper installation, accidental damage or
removable parts are excluded from this warranty.
How to Obtain Service
Should this product require service, please return the product with proof of warranty
coverage (e.g. dated bill of sale), copy of warranty card, the return sheet with a brief
explanation of the problem, to the company at the address shown below at
transportation prepared by the retail purchaser:
Paragon Products International Inc.
2168 S. Atlantic Blvd., #312
Monterey Park, CA 91754
U.S.A.
Call at: 1-800-xxxx or email at: info@paragon-us.com
http://www.promowide.com
This warranty gives you specific legal rights and you may have other legal rights
that vary from state to state.
P.7

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:03:14 12:06:42+08:00
Modify Date                     : 2005:03:14 12:06:42+08:00
Page Count                      : 8
Creation Date                   : 2005:03:14 04:06:42Z
Mod Date                        : 2005:03:14 04:06:42Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Chiney
Metadata Date                   : 2005:03:14 04:06:42Z
Creator                         : Chiney
Title                           : Microsoft Word - SP1390 manual.doc
EXIF Metadata provided by EXIF.tools
FCC ID Filing: REDHP2291-001T

Navigation menu