Clemas Hydra Tyre Mark Remover Chemical Data Sheet
User Manual: Clemas
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Glos. GL20 8NB Tel: 01684 850777 E-mail: info@clemas.co.uk Fax: 01684 850707 www.clemas.co.uk PRODUCT CODE: HydraTMR Product Description Hydra Tyre Mark Remover is a specialised heavy duty cleaner designed to remove particularly stubborn rubber deposits such as tyre marks from floor surfaces. The Benefits; • Is safe to use on epoxy coatings and screeds. • Is water rinse-able and leaves no slippery residues. • Contains no harmful solvents, caustic chemicals, paraffins, aromatic or chlorinated hydrocarbons Directions Hydra Tyre Mark Remover is supplied ready-to-use Manual: Sweep floor to remove debris. Apply product to the area to be cleaned with a spray, cloth or mop. Leave for a few minutes and wipe off. If mark does not lift immediately, apply a little more product and leave for 10 to 20 minutes. Clean floor area thoroughly with a solution of Hydra Tyre Mark Remover. Note: on painted floors we recommend that a small trial is initially carried out in an inconspicuous area to test for compatibility. Floor Cleaning Machines: Suitable for use only with hand operated floor cleaning machines: Always check with the machine manufacturer for compatibility, always trial small area before proceeding. Sweep floor to remove debris. Apply product to the area to be cleaned with a hand held spray or back pack system. Leave for a few minutes. Attach red pads or stiff brushes to a combination scrubber/dryer machine. Charge with a 2% solution of Hydra Tyre Mark Remover. Make the first pass of the scrubber drier machine without using the vacuum, giving the product additional contact time with the floor. On the second pass, scrub floor and recover soiling as usual. Health and Safety Hydra-Clean FDG2 should not represent any health and safety issues when utilised in accordance with the recommended instructions. PRODUCT SAFETY DATA SHEET IDENTIFICATION Product Name: Hydra Tyre Mark Remover Product Code: HydraTMR Supplier: Clemas & Company Limited Unit 5, Ashchurch Business Centre Tewkesbury, Glos GL20 8NB Tel: 01684 850777 Fax: 01684 850707 COMPOSITION/INFORMATION INGREDIENTS % CAS number Methyl Propoxy Propanol <10% 34590-94-8 Di-methyl Glutarate 14035-94-0 Di-methyl Succinate 20-40% 1119-40-0 Di-methyl Adipate 20-40% 106-65-0 HAZARDS IDENTIFICATION LABEL INFORMATION: Classified as an irritant in accordance with the Chemical (Hazards Information and Packaging for Supply) Regulations 1994 and its amendments. SPECIFIC HAZARDS: This product will cause de-fatting and some irritation to the skin and the eyes. FIRST AID MEASURES EYE CONTACT: Rinse immediately with water, seek medical advice and if symptoms occur. SKIN CONTACT: Rinse with water advisable after use. INHALATION: Seek medical advise if symptom occur. INGESTION: Rinse mouth with water, drink a copious quantity of water if a large quantity has been ingested; do not induce vomiting. Seek medical advise if symptoms occur. FIRE FIGHTING MEASURES None. Not applicable as the product is water based and non combustible. ACCIDENTAL RELEASE PERSONAL PRECAUTIONS: Spillages may create unusually slippery surfaces. ENVIRONMENTAL PRECUATIONS: Small spills may be washed to drain. Large quantities should be contained and disposed of in accordance with Local Authority Guidelines. CLEAN UP METHODS: Small spills may be washed to drain with large quantities of clean water. Large spills of concentrated product should be contained, absorbed onto dry sand or a similar material and placed in suitable in suitable containers for disposal. HANDLING & STORAGE HANDLING: Handle in accordance with good industrial practice, wearing personal protection equipment (safety goggles and impervious gloves) are advised when working with concentrated product. STORAGE: Store upright in original container, away from thoroughfares to avoid accidental damage. Keep away from sources of heat or direct sunlight. USAGE: Natural ventilation is required during use. OCCUPATIONAL EXPOSURE LIMITS EXPOSURE CONTROLS: No exposure limits have been established for this product. Avoid contact with eyes, skin or clothes. RESPIRATORY PROTECTION: No personal respiratory protection equipment normally required. HAND PROTECTION: Impervious gloves recommended. EYE PROTECTION: Safety goggles recommended SKIN PROTECTION: Protective overalls and shoes/boots recommended. PHYSICAL AND CHEMICAL PROPERTIES Appearance clear liquid PH (concentrate) N/A Melting point / melting range 0°C Boiling point/boiling range >100°C Odour Characteristic Flash point N/A Flammability limits N/A Solubility in water Complete STABILITY & REACTIVITY Stability: Normally stable Conditions to avoid: Extremes of temperature Materials to avoid: Strong oxidizing agents Hazard products of decomposition: Smoke, carbon monoxide, carbon dioxide, oxides of nitrogen TOXICOLOGICAL INFORMATION Toxicity: Not known Eye Contact: Solution will cause some irritation. No Permanent damage expected if treated immediately. Skin Contact: Prolonged contact with concentrated solutions may cause de-fatting of surface and will cause some irritation. Ingestion: Ingestion may cause irritation to mouth & throat. Respiratory system: May cause some irritation. ECOLOGICAL INFORMATION Bio-degradable: Will compose into simple non toxic salts in the environment Environmental effect: No environmental effect – will not bioaccumulate. DISPOSAL CONSIDERATIONS Product: Dispose in accordance with Local Authority Regulations. Container: Made from HDPE and should be disposed of in accordance with Local Authority Regulations. TRANSPORT INFORMATION General: This product is not classifies as hazardous for transportation. REGULATORY INFORMATION Classified as an irritant for labeling purposes. th Date of issue: 17 June 2013 Conforms to EC Directive 2001/58/EC & ISO 11014-1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2013:10:11 09:49:39+01:00 Modify Date : 2013:10:11 09:49:39+01:00 Page Count : 2 Creation Date : 2013:10:11 08:49:39Z Mod Date : 2013:10:11 08:49:39Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : Emma Metadata Date : 2013:10:11 08:49:39Z Creator : Emma Title : Microsoft Word - Hydra Tyre Mark Remover Chemical Data Sheet.docEXIF Metadata provided by EXIF.tools