Climax Technology Co FS FALL SENSOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1535839
Application ID	X1b0ZVyBKEXS2jKLI/hyiw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.46kB (43299 bits)
Date Submitted	2011-09-02 00:00:00
Date Available	2011-09-02 00:00:00
Creation Date	2011-08-24 13:58:54
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2011-08-24 13:58:54
Document Title	Users Manual

Fall Sensor
This fall sensor is designed for a user to push a button for help at any time and more it can automatically dial
an emergency all or alarm if it detects a fall on the condition that he/she is unable to push the button
himself/herself.
A. Identifying the Parts
1. Active/Pendant Button
z Pressing the Active Button for 0.5 sec will activate the
Main Unit, causing it to dial emergency call or alarm
(CID event code: 101).
z Pressing and holding the button for 8 seconds will
cancel the alarm.
2. Red LED
LED OFF: In Standby Mode
RED LED ON: Transmitting signal to the Control Panel
RED FLASH for 5s: power on
RED FLASH for 1.5s: Low battery status
3. Lanyard Loop
4. Battery Compartment Cover
B. Low Battery Detection and Superivison
Fall Sensor features Auto Low Battery detection and Supervision.
After the battery is inserted, Fall Sensor will automatically transmit an Low Battery detection &
Supervisory code to detect Low Battery every 24 hours. If the Main Unit has not received the Low
Battery detection & Supervisory code, it will then notify the user accordingly (depend on the Main
Unit setting).

Auto Low Battery Detection & Supervision functions can only be activated as a pair.
Once Auto Low Battery Detection & Supervision functions are activated, they cannot be
deactivated later in any circumstances.
C. Learn In Fall Sensor
Fall Sensor has a unique numeric code called “ID code”. The ID code enables the Main Unit to identify the
signal is transmitted from the Fall Sensor.
Step 1. Put the Control Panel into “Device +/-” menu and then select “Add Device” menu (or “Learning”
Mode).
Step 2. Press the Button on Fall Sensor, a radio signal will be transmitted to the control panel.
Step 3. Please refer to the operation manual of your control panel under the section of “Device +/-” to
12-AUG-2011
complete the process.
D. Battery Life
The Fall Sensor uses one 3V lithium battery as its power source. The Fall Sensor will have a typical
battery life of 2 years at an average of one activation a day.
If the battery voltage is low, a Low Battery signal will be sent to the Control Panel to notify the user.
Moreover, when it s operated in low battery status, the Red LED will Flash to remind the user to replace
the battery.

It is prohibited to learn-in Fall Sensor to the Control Panel when Fall Sensor is in low battery
status.
E. Inactivity Detection
If a fall is detected, the sensor will transmit an alarm signal (CID event code: 120) to Control Panel. If no
sudden movement within 10 seconds after fall detection, an inactivity code (CID event code: 102) will be
sent to Central Monitoring Station to notify CMS of user’s inactivity condition.
F. Usage Recommendation
1. If a fall sensor is placed steadily in one position for more than 3 hours, a sleep timer-1 minute will be
activated. During one-minute sleep time, the fall sensor will not be triggered due to put-on movement.
After 1 minute, the fall sensor will be back to normal function.
2. Please place a fall sensor outside of a coat. Do not cover it with any clothes.
3. Carefully place the fall sensor on a desk when you are not using it in order to avoid triggering an alarm.
G. Testing
During testing, do not trigger the fall sensor twice within a 10-second interval.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution:
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance may void the user's authority to operate this equipment. (Example - use only
shielded interface cables when connecting to computer or peripheral devices).
12-AUG-2011

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2011:08:24 13:58:54+08:00
Modify Date                     : 2011:08:24 13:58:54+08:00
Page Count                      : 2
Creation Date                   : 2011:08:24 05:58:54Z
Mod Date                        : 2011:08:24 05:58:54Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2011:08:24 05:58:54Z

EXIF Metadata provided by EXIF.tools