Climax Technology Co VDP Video Door Phone User Manual
Climax Technology Co Ltd Video Door Phone Users Manual
Users Manual
Aug 5, 2016 Table of Contents 1. INTRODUCTION __________________________________________________________________ 8 2. APPLICATION OVERVIEW _________________________________________________________ 9 3. 4. 5. 6. 2.1. PARTS IDENTIFICATION __________________________________________________________ 9 2.2. LED INDICATOR _______________________________________________________________ 10 2.3. THE POWER SUPPLY ___________________________________________________________ 10 GETTING STARTED ______________________________________________________________ 11 3.1. EQUIPMENT REQUIRED __________________________________________________________ 11 3.2. HARDWARE INSTALLATION _______________________________________________________ 11 3.3. WI-FI SETUP AND LEARNING______________________________________________________ 13 OPERATION ____________________________________________________________________ 16 4.1. WEB BROWSER ACCESS ________________________________________________________ 16 4.2. SMARTPHONE ACCESS __________________________________________________________ 17 4.3. DOORBELL NOTIFICATION ________________________________________________________ 18 4.4. VIDEO / PICTURE CAPTURE _______________________________________________________ 19 PROGRAMMING ________________________________________________________________ 20 5.1. VIDEO SETTING _______________________________________________________________ 20 5.2. VDP SETTING ________________________________________________________________ 23 LOCAL PROGRAMMING WEBPAGE ________________________________________________ 28 6.1. 7. 8. 9. CONNECTING TO WEBPAGE ______________________________________________________ 30 IP CAMERA ____________________________________________________________________ 31 7.1. IMAGE TUNING ________________________________________________________________ 31 7.2. TIME STAMP _________________________________________________________________ 32 7.3. STREAM SETTING ______________________________________________________________ 33 7.4. RECORDED FILES ______________________________________________________________ 34 7.5. ALARM SETTING ______________________________________________________________ 35 NETWORK SETTING _____________________________________________________________ 36 8.1. NETWORK ___________________________________________________________________ 36 8.2. WIRELESS ___________________________________________________________________ 37 8.3. UPNP ______________________________________________________________________ 38 SYSTEM SETTING _______________________________________________________________ 39 9.1. CHANGE PASSWORD ___________________________________________________________ 39 9.2. REPORT_____________________________________________________________________ 40 9.3. MEDIA UPLOAD _______________________________________________________________ 41 9.4. XMPP ______________________________________________________________________ 42 9.5. DATE & TIME _________________________________________________________________ 43 9.6. DYNAMIC DNS ________________________________________________________________ 44 9.7. FIRMWARE ___________________________________________________________________ 45 9.8. FACTORY RESET ______________________________________________________________ 46 9.9. BACKUP & RESTORE ___________________________________________________________ 47 9.10. SYSTEM LOG _________________________________________________________________ 48 9.11. LOGOUT ____________________________________________________________________ 49 9.12. REBOOT ____________________________________________________________________ 49 10. HISTORY _______________________________________________________________________ 50 10.1. EVENT LOG __________________________________________________________________ 50 10.2. REPORTED EVENTS ____________________________________________________________ 50 1. Introduction VDP-A1 Video Door Phone is designed to replace conventional doorbell by providing remote video streaming access, two-way communication via WiFi network. The Video Door Phone functions as part of Climax alarm system and must be connected with a Climax security system Control Panel. Setup and remote access of Video Door Phone is performed via Climax Home Portal Server, using provided smartphone application. 2. Application Overview 2.1. Parts Identification Front View 1. 2. 3. 4. 5. Back View (Without Bracket) Bracket (Inside) Bracket (Outside) Camera Lens Night Light LED LED Indicator (Blue / Amber) Function Button Bottom Screw The bottom screw should be loosened before hooking the VDP onto mounting bracket, and tightened after VDP is hooked to bracket. When tightened, the bottom screw fixes VDP to mounting bracket. VDP cannot be detached from bracket as long as screw is tightened. 6. Doorbell Jumper Switch Jumper On The jumper link is inserted connecting the two pins. Jumper Off If the jumper link is removed or “parked” on one pin. Jumper ON: Connect the Jumper Switch when using VDP with hardware doorbell. Jumper OFF: Disconnect the Jumper Switch when not using VDP with hardware Doorbell. 7. 24V ADC Power Input 8. Doorbell Terminal 9. Doorbell Terminal 10. 24V ADC Power Input 2.2. LED Indicator The Video Door Phone has 2 sets of LED in Blue and Amber color, arranged in circular pattern around the button to indicate device status. LED Color Blue Amber Behavior Indication Flash every 3 seconds VDP under Wi-Fi setup mode (AP mode) Spinning VDP button pressed, waiting for answer ON VDP under video streaming and two-way communication ON for 3 seconds VDP finish warm up upon power on, entering normal operation. Flash every 3 seconds Wi-Fi connectivity problem* Flash every second VDP unable to connect to server 3 Flash then ON for 6 VDP reset to factory default seconds *Note: It takes about 1 minute for VDP to connect to Wi-Fi after power on. Before the Wi-Fi connection is established, the Amber LED may flash momentarily. 2.3. The Power Supply The VDP uses 24V±10% AC or DC power as power source. Connect power to the connector on the bracket, install the VDP on the bracket to power on the device. 10 3. Getting Started 3.1. Equipment required The following equipment is required to use VDP: A Climax IP based security system alarm panel – The panel must be registered in Climax Home Portal Server with a valid user account. Refer to panel and Home Portal Server user guide to complete panel setup and registration process. A router supporting 2.4 GHz Wi-Fi network. The Climax panel should be connected to this router with access to internet and Home Portal Server. An iPhone or Android smartphone with Climax Vesta Home 2 app installed. Android version requirement: Android 5.1 or over. iPhone version requirement: iOS 8 or over 3.2. Hardware Installation 1. Determine whether the VDP would be connected to a conventional doorbell. If doorbell is used, connect the Jumper Switch. If doorbell is not used, do NOT connect the Jumper Switch. Warning The Jumper Switch setting MUST be adjusted according to doorbell usage. Make sure the jumper setting is correct before proceeding with installation. Incorrect setting may cause damage to VDP when wiring. 2. Find the wall mounting bracket, connect 24V±10% ADC power to the connector on the bracket. If doorbell is used, also connect the door bell. 11 The wiring should connect to the connector on the inside of bracket, pass through the opening on the bracket and tucked into the bracket’s central cavity on the back. 3. The wall mounting bracket has 4 mounting holes. Use the mounting holes as template, mark mounting location on the wall, drill holes and insert wall plug if needed. 4. Screw the mounting bracket onto marked location. 5. Hook VDP onto the bracket. When VDP is hooked on the bracket, the connect come in contact with the device and VDP is powered on. 6. Tighten the bottom screw to lock VDP onto bracket. 12 3.3. Wi-Fi Setup and Learning Use your smartphone to open Vesta Home 2 app and log into the user account registered by the control panel. Select the Camera tab in the app. Press “New Video Doorbell” to begin setting. Power up the Video Doorbell by applying AC power. The device will first warm up for about 30 seconds, then the Blue LED will begin to flash. Flashing Blue LED indicates the Video Doorbell does not have a working Wi-Fi setting and it enter Wi-Fi setup mode (AP mode) automatically upon power up. If the VDP has already finished Wi-Fi setting, it will not enter Wi-Fi setup mode upon power up and must be reset to factory default. Follow procedure below to factory reset: a. Disconnect and reconnect AC power. b. Press and hold VDP button as soon as AC power is reconnected. Do NOT wait for warm up to complete. c. Keep holding the button for about 25 seconds until VDP Amber LED flashes 3 times, then stays ON, then release the button. d. Factory Reset is complete, VDP will reboot and enter W-Fi setup mode. 13 5 Leave the Vesta Home 2 TW app in the background and access your Smartphone’s Wi-Fi setting function. Look for wireless network named VDP_XXXXXXXXXXXX. (XXXXXXXXXXXX = device MAC address) Connect to this wire network, then return to Vesta Home 2 TW app and continue. If your smartphone warns the network has no internet access, ignore the warning and proceed. The app will search for available wireless network and display search result. Select the wireless network desired and enter password to join the network. If you encounter error message, check your smartphone wireless setting to make sure the smartphone is still connected to the same VDP_XXXXXXXXXXXX network 14 previously selected, then return to app and search the available network again. After successfully joining network, the app proceeds to learn the Video Doorbell into the control panel. Enter the device name and proceed. When learning is complete, the app displays success message. Press Done and re-login to the app to start using Video Doorbell (The device will reboot upon complete learning, you may need to wait a short time for it to restart.) 15 4. Operation Operation of VDP should be performed via Climax Home Portal Server, using the account registered by the Control Panel which VDP is learnt into. 4.1. Web Browser Access When accessing the Home Portal Server account using a web browser, VDP is located under the Camera page and has the same function of a Climax IP Camera. Two-way voice and doorbell functions are not enabled for web browser access. To uses these functions, a smartphone app is required. Please see 4.2. Smartphone Access for detail. Press the Record Video button to record a video clip. 16 4.2. Smartphone Access Smartphone application access to VDP provides two-way voice and doorbell push notification function. Log into Home Portal Account and select Cam page to display VDP streaming thumbnail. Press the thumbnail image to enlarge to full screen. The VDP full screen has 4 function buttons: Press the Record Video button to record a video clip. The video clip length is set to 30 seconds by default, composed of 10 seconds before button press and 20 seconds after button press. to take a single picture. Press the Camera button Press the Microphone button to toggle smartphone microphone. Full screen VDP streaming will open voice channels automatically, allowing smartphone user to converse with VDP. Use the microphone button to control smartphone microphone and switch between one-way and two-way voice channel. : Smartphone microphone OFF – One-way listen-in only. : Smartphone Microphone ON – Two-way voice communication. Press the Return button to return to camera thumbnail page. 17 4.3. Doorbell Notification The Doorbell Notification function allows VDP to inform the user remotely when its doorbell button is pressed. With Doorbell Notification, the user will be able to answer the doorbell remotely and converse with the guest via VDP using the smartphone even when away from home. Before using the Doorbell Notification, the following settings should be completed: The VDP must be properly setup and learnt into Control Panel, as described in previous chapter. The Control Panel Home Portal Server account should be registered and working properly. The Control Panel Home Portal Server account’s push notification setting must be enabled. To enable push notification function, Log into the Home Portal Server account and select Notification setting. Press the doorbell button on VDP, VDP will sound a door chime. If any hard wired doorbell is connected to VDP, the doorbell will also be activated; the Blue LED will start spinning. The user will receive a push notification message from its panel Home Portal Server Account, titled “Doorbell” Press on the push notification message, the smartphone will launch Vesta Home 2 TW app and log into registered account automatically. After login, the app will automatically jump to VDP page. VDP Blue LED will turn to steady ON to indicate. After finishing conversation, press the return button to return to camera thumbnail page. If the Doorbell Notification is not answered within 1 minute after button press, the VDP will time out and the Blue LED will stop spinning When the button is pressed, VDP will take a picture which will be uploaded to the Home Portal Server. 18 4.4. Video / Picture Capture VDP will take a picture or video during following occasions. All pictures and video clips taken will be uploaded to the server. Picture Press the function button in front of VDP to take a picture Press the camera icon on the app when streaming video to take a picture Video Press the record video icon on the app or server webpage UI to record a video Whenever an alarm is activated by the Control Panel, VDP will record a video immediately. 19 5. Programming VDP setting program should be programmed via Home Portal Server web browser UI. 5.1. Video Setting Video Setting options are accessed on the Home Portal Server web UI’s Camera page. Press the Video Setting icon to adjust video configuration: 20 Video Adjustment: For image tuning. 21 Time Stamp: Select the time stamp location on video. Press the Record icon to record a video clip 22 5.2. VDP Setting VDP’s own setting options are accessed on the Home Portal Server web UI’s Edit Device page. 23 Setting The setting page is used to set VDP zone number, device name and time zone setting. Please refer to your Control Panel’s configuration webpage for option detail. 24 Recorded Video The Recorded Video page stores video clips previously taken by VDP for download. Click the download link icon to down the file into your computer. 25 Recorded Setting The Recorded setting page determines the video clip length when VDP is activated to record a video. Total Time: The total time length of each recorded video (Default: 30 seconds)The total video time length. Pre-alarm: This function is disabled for VDP, please ignore. 26 Wireless and Network The Wireless Network webpage display current VDP Wi-Fi setting. Wi-Fi setting can only be changed by factory resetting VDP and using Vesta Home 2 TW app to reprogram Wi-Fi setting. Wi-Fi setting cannot be changed on the webpage. 27 6. Local Programming Webpage VDP also supports local programming webpage which may be access via LAN after completing Wi-Fi setting. In order to locate VDP on local network, a specific “Finder” software is provided by Climax to locate VDP on LAN. To install the “Finder” software” Step 1. Insert the supplied CD-ROM into your CD-ROM drive Step 2. Find the Finder software in the CD-ROM. Install and execute the Finder. Step 3. Finder will automatically search for VDP on LAN and display its information. If available, the camera’s LAN IP address, Firmware version and MAC address will be displayed If VDP is not displayed, check VDP AC power and make sure its Wi-Fi is properly setup and click “Search” to update the panel information. Step 4. (Optional)You can choose to edit the camera’s network setting manually by clicking on the panel column, then click “Configure Setting” 28 The LanType is default to DHCP and does not require manual input of IP/Netmask/Gateawy/DNS setting. If you wish to configure these setting manually, change LanType to Static. After finish changing network setting, enter the user name (default: admin) and password (default: cX+HsA*7F1) then click OK to confirm. The user name and password can be changed later in the camera’s configuration webpage Step 5. Click the camera information column and click on “Open Web Page”, or double click on the camera column to link to the panel configuration webpage. Your default browser will start automatically to connect to the LAN IP displayed in Finder. 29 6.1. Connecting to Webpage If default login user/password is not changed, webpage login will be disabled 1 hour after power on. Please reboot the camera and retry connection. Step 1. Double click the VDP column on Finder, or enter VDP’s LAN IP Address in your browser. Step 2. Enter the login username and password Default username: admin Default password: cX+HsA*7F1 tep 3. You will enter change password page. Enter and repeat a new password (username change is optional), take care that both username and password are case sensitive. Click OK to confirm. Step 4. Upon confirming new username and password. You will enter camera Welcome page. The camera will prompt you to re login with new username and password. The Welcome page displays camera info. Click on the pages and folders on the left to access the camera’s various functions 30 7. IP Camera The “IP Camera” folder on the left panel includes configuration webpages for you to manage your VDP and view videos. 7.1. Image Tuning Click on “Image Tuning” to adjust video preferences according to the below parameters: 31 7.2. Time Stamp The “Tim Stamp” webpage is for you to edit the Time Stamp format and location on the video. Position The available options are: Date Format The available options are: Time Format The available options are: Press “OK” to submit your adjusted parameters. Press “Reset” to re-select the parameters. 32 7.3. Stream Setting The “Stream Setting” webpage determines quality of video streaming, and the port to be used when VDP is access remotely via Port Forwarding. H264 Stream Quality adjusts the quality of the stream. Frames Per Second (FPS) are adjustable. Increasing FPS improves the quality of the live-stream. Click “OK” to confirm changes or click “Reset” to reset to the previously set parameters. Port: The port number for obtaining HD 1280x720 resolution H264 video stream. The factory default is set to 0 and RTST access is disabled. To enable RTSP function, please set a port number. Motion JPEG Stream Quality adjusts the quality of the stream. 33 7.4. Recorded Files This menu displays all the recorded files. The VDP has 20 mega-byte storage space for recorded video clips. The video files are stored in the camera’s RAM memory and will be cleared if the camera is powered down. Click on the buttons for the respective functions described below: All: to select all the recorded videos. None: to cancel selecting the recorded videos. Half Old: to select the older half the recorded videos. Invert: to invert the current selection. E.g. if “All” was selected, clicking “Invert” will clear all selections. Delete: to delete the currently selected (ticked) video. Video link: to download or play the video. 34 7.5. Alarm Setting This menu displays the video recording options. Video Record Length settings Total Time: The total time length of each recorded video (Default: 30 seconds). Recycle Recorded Video When this option is enabled, VDP will automatically delete the oldest videos to clear storage space in the camera when the memory is full Press “OK” to submit the updated programmed parameters. Or press “Reset” to re-enter (“Reset” button resets the parameters to the previously set parameters). 35 8. Network Setting 8.1. Network The following is displayed when you click on “Network” under the “Network Setting” option: Obtain an IP address automatically (DHCP) If DHCP is selected, the Network will obtain an IP address automatically with a valid Network DHCP Server. Therefore, manual settings are not required. This is only to be chosen if your Network environment supports DHCP. It will automatically generate all information. Use following IP address You can also enter the Network information manually for IP Address, Subnet Mask, Default Gateway, Default DNS 1 and Default DNS 2. DNS Flush Period You can set the system to clear current DNS resolution records for all entered URL settings (Reporting, Upload, XMPP…etc.) after a set time period. The system will then resolve the Domain Name again and acquire new IP address for the URL settings. This function is disabled by default. Web Server Set the port used to access VDP’s webpage. VDP will reset upon changing the web server port. After reset is complete, VDP will switch to using the new port number when opening its webpage. 36 8.2. Wireless The “Wireless” webpage display current VDP Wi-Fi setting. Wi-Fi setting can only be changed by factory resetting VDP and using Vesta Home 2 TW app to reprogram Wi-Fi setting. Wi-Fi setting cannot be changed on the webpage. 37 8.3. UPnP The following is displayed when you click on “UPnP” UPnP stands for Universal Plug and Play, which opens network architecture that leverages TCP/IP and the web technologies to enable seamless proximity networking in addition to control and data transfer among networked devices at home, office or public spaces. You can configure this setting to allow for Port Forwarding connection to VDP Enable UPnP Device: When enabled, you will be able to see this device via any UPnP discovery tool Enable UPnP Port Redirect: The device will try to find an UPnP-supported router and set up the port to redirect to the router. Port Forwarding: 1. Local Port 2. External Port 3. Protocol 38 9. System Setting 9.1. Change Password Edit the username and password used to log into VDP webpage under “Change Password” page. Enter a new name or new password and click “OK” to confirm the username and password change. The username and password are case sensitive. 39 9.2. Report The report function for VDP is reserved for use. Reporting URL 40 9.3. Media Upload Program the camera’s captured video upload destination under “Media Upload” page. Upload to FTP: ftp://user.password@server/path or ftps://user.password@server/path Upload to server: http://server/path or https://server/path After the camera has been learnt into Control Panel, the first upload URL will be programmed automatically according to panel setting. Do NOT change this setting or it will cause video upload to server to fail.. 41 9.4. XMPP The “XMPP” page allows the camera to connect to the Home Portal™ Server for remote control. Please do not modify any settings or the camera may lose connection with Home Portal Server. 42 9.5. Date & Time The following page is displayed when you click on “Date & Time”: Under the Date & Time heading, you can edit time and date. As the page does not automatically refresh itself with the time, you can click on “Now” to refresh to your current time. Under the Time Zone heading, you can choose your time zone. Under the Internet Time heading, you can tick the box “Automatically synchronize with an Internet time server” to adjust to internet time. The scroll down bar of “Server” allows you to choose from a selection of time servers. Click on “OK” to confirm the settings. 43 9.6. Dynamic DNS The “Dynamic DNS” page provides VDP public IP information. Dynamic DNS Server: Set the server used by VDP to acquire its public IP address. Public IP address: The public IP address shown is required to for remote access of the VDP via port forwarding. 44 9.7. Firmware The following page is displayed when you click on “Firmware” You can update VDP firmware: Click the “Choose File” button, browse and find the correct file, and press “Apply” to apply the setting. Please follow the onscreen instruction to complete the update. It is also recommended to select “Do factory reset (recommended)” when upgrading a firmware. 45 9.8. Factory Reset Factory Reset function will clear all VDP setting, event records and restore all settings to factory default. You can choose to reset VDP to the factory default setting by clicking the “Yes” button. After factory reset, delete VDP from panel device list, then user the Vesta Home 2 app to setup VDP WiFI and learn VDP into panel again. Hardware Factory Reset 1. Disconnect and reconnect AC power. 2. Press and hold VDP button as soon as AC power is reconnected. Do NOT wait for warm up to complete. 3. Keep holding the button for about 25 seconds until VDP Amber LED flashes 3 times, then stays ON, then release the button. 4. Factory Reset is complete, VDP will reboot and enter W-Fi setup mode. 46 9.9. Backup & Restore You can store the current settings by clicking on the “Download” button. If you wish to restore the previously stored file, click on “Choose File”, find the correct file and click on “Apply” to restore to the previous setting. 47 9.10. System Log The “System Log” displays system operation history. You can choose how many reported events are displayed by selecting the drop down bar near the bottom of the page, or click “Download” button to download detailed system log file into your computer. 48 9.11. Logout Click “Logout” and confirm the action to disconnect from VDP webpage. 9.12. Reboot The Reboot function allows you to restart the VDP. Press “Reboot” and confirm, VDP will automatically start rebooting process and countdown the remaining time. 49 10. History 10.1. Event Log The Event Log records system events. You can choose how many events are displayed on the page by selecting the drop down bar near the bottom of the page. 10.2. Reported Events The Reported Event page is reserved. You can choose how many reported events are displayed by selecting the drop down bar near the bottom of the page. 50 I. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 51
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : PCUser Create Date : 2017:01:12 14:06:25+08:00 Modify Date : 2017:01:12 14:06:25+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - VDP-A1 Video Door Phone 20160805 + FCC.doc Creator : PCUser Document ID : uuid:58476660-6e3e-45ef-abf6-3b33cd54b567 Instance ID : uuid:32f73133-f1ca-4033-bbda-eb2ef24e9e59 Page Count : 47EXIF Metadata provided by EXIF.tools