Cobra Electronics 0K29BT2K12 BLUETOOTH ACCESSORY FOR CB User Manual 29LXBT MANL indd
Cobra Electronics Corporation BLUETOOTH ACCESSORY FOR CB 29LXBT MANL indd
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
Users Manual 3
Operation Operation Bluetooth® continued To Place a call on Hold The display will show: NB /ANL CAL TX Note NB/ANL SWR 1.5 2 3 ANL RX If, while on hold the call is S/RF S/RF RF dropped,SWR you will hear a sound CAL 3 5 79 SIGradio +30dB beep and the CB will SWR/CAL EN return to standby. VOL SQ DYNAMIKE A2DP Audio Streaming OFF PU SH EN TE MEM NB /ANL S/RF MIN S/RF SWR CAL CAL SIG 1 SQ DYNAMIKE NB/ANL SWR 1.5 2 ANL OFF MIN S/RF S/RF RF SWR CAL SIG 1 VOL OFF SQ U SH EN U P TE MEM ESC SWR CAL T BACK MAX CH 9/ 19 WX ! SWR 1.5 RF GAIN DIM CB /WX DELTA S/RF TUNE S/RF ESC BLUETOOTH ON MIN MAX OFF EXIT TX 5 79 +30dB PU SH EN TE NU MEM MIN 24 VOL CH 9/ 19 SQMEM SCAN DYNAMIKE OFF CB /WX OFF DELTA TUNE MAX MIN T BACK OFF SCAN TX CB /WX DIM ESC SWR CAL EN U SH EN U P TE CH 9/ 19 DIM ESC WX ! GAIN Weather AutoRFScan DELTA TUNE T BACK For ideal weather reception use a dual band antenna (center load/baseload). Weather Channels NOAA Weather Radio (NWR) is a service of the National Oceanic and Atmospheric Administration (NOAA), of the U.S. Department of Commerce. 380 NWR stations are in operation by the U.S. Government in addition to several NWR stations that are maintained by private interest groups. The capability is to supplement warnings by sirens and by commercial radio and television. The 10 National Weather Channels provide full coverage to keep you informed of weather conditions, 24 hours a day, 7 days a week. MEM SCAN 163.275 5 79 +30dB WX ! Press and select Off.RF GAIN MIN SCAN CAL SWR CAL T BACK SIG 1 Note If you wish to receive a listing of NOAA ‘Weather Radio Transmitter locations, contact your nearest National Weather Service Office or write to: National Weather Service (Attn: W/OM11) NOAA Silver Springs, MD 20910. What is Weather Radio? The unit will continually scan all 10 WX channels for 1050 Hz tone. If the tone is detected the unit will activate WX mode on the channel with the tone. Default state is Off. Go to Menu mode to choose On/Off (see page 22): OFF SCAN SWR /CAL CAL Weather Alert Scan MEM SCAN RX DYNAMIKE 29LXBT_MANL.indd 24-25 EN DIM CB /WX RF Press Menu/Enter again and select Bluetooth: NB /ANL SWR/CAL MEM SCAN NB /ANL 5 79 +30dB CH 9/ 19 SCAN BLUETOOTH EXIT TX RX RF SWR/CAL VOL SWR CAL OFF MAX Press Menu/Enter and select Bluetooth: ESC WX ! Press Enter knob. This call TUNE on hold RF puts GAIN theDELTA T BACK allowing CB communication. MIN NB/ANL SWR 1.5 ANL DIM NB/ANL SWR 1.5 2 CAL TX Allows for voice Caller ID, 3 PRESS ENTER TO ANL RX e-mails and text messages to S/RF RETURN TO CALL S/RF RF SWR be read through the CB radio. CAL 3 5 79 SIG 1 +30dB SWR/CAL MEM WX ! U SH EN Note U P TE EN Press Menu Enter knob again. DELTA TUNE A thirdVOL partySQ app download is DYNAMIKE RF GAIN required in order for this feature To Turn Bluetooth Off on the Radio: to be functional. OFF NB /ANL If threatening weather is nearby, the National Weather Service may broadcast a 10 second alert tone. This tone will be heard through the CB, even if the CB/WX Control is in the CB mode or the unit is turned off. This enables you to monitor CB frequencies and still be warned by the National Weather Service Emergency Alert. When you hear the alert, press the CB/WX button in the WX mode. You will then be able to hear the Weather Warning Broadcast. Your 29 LX BT has a special auto squelch circuit for weather transmission which disables your squelch control. MEM SCAN CB /WX To Return to Phone Call MIN The display will show: MIN CH 9/ 19 SCAN PRESS ENTER TO GO TO CB Weather Information Weather Alert What You Should Know About Weather SWR CAL If active while in CB mode, will determine if the present WX channel isMAX active. If the present WX MIN OFF channel is not active, will search for the strongest WX channel and auto change to that channel. Default is off. Go to Menu mode to choose on/off (see page 22). 25 2/27/12 11:14 AM Operation Operation Note CAL SWR 1.5 2 Press NB/ANL Dim/Escape ANL buttonS/RF to return to CB mode. S/RF RF SWR/CAL VOL SIG 1 SQ NB /ANL WX ALERT IS OFF ON S/ RF OFF TX RX 5 79 +30dB PU SH EN TE NU MEM WX ! CH 9/ SCAN 19 NB/ANL SWR 1.5 2 MEM SCAN ANL DIM S/RF /W RF CB SWR ESC CAL SIG 1 NB /ANL SWR /CAL SWR CAL Setting Weather Alert ScanSWR /CAL SIG 1 Note If an alert is detected the unit NB/ANL SWR 1.5 2 will activate WX mode on3 the CAL TX ANL RX channelS/RF withRFthe alert. Use S/RF SWR Menu/Enter knob to select CAL 3 5 79 SIG 1 +30dB SWR/CAL On/Off and press to set. NU MAX NB /ANL CAL TX NB /ANL CH 9/ U SH EN U P TE MEM RX EN U SH EN U P TE PU SH EN TE MEM SWR /CAL CAL Press Menu/Enter knob and rotate clockwise to WX Auto Scan. Press Menu/Enter knob to select On/Off. Setting Weather Auto MAX Scan MIN OFF VOL OFF SQ MINDYNAMIKE SWR CAL MEM SCAN MAX MIN OFF SCAN OFF DIM ESC RX +30dB SWR CAL CH 9/ 19 MEM SCAN CB /WX SIG SWR /CAL SCAN T BACK ESC CH 9/ 19 WX ! MAXVER MIN SOFTWARE GO TO DEFAULT TX 5 79 +30dB CAL TX N U P U S H E N T Setting Weather Auto Scan SWR DIM To restore default settings, Menu/Enter RF GAIN Press DELTA TUNE T BACK knob again. Rotate Menu/Enter knob clockwise to select Settings then Go To Default. RX RF GAIN DELTA TUNE TSQ BACK VOL and DYNAMIKE CAL S/On/Off RF Press Menu/Enter knob to select S/RF RF exit SWR to main menu. CAL 3 5 79 CH 9/ 19 CB /WX WX ! SOFTWARE VER RF GAIN DELTA TUNE GO TO DEFAULT MEM CB /WX SIG 1 NB/ANL SWR 1.5 ANL SCAN Software Version/Factory Settings MEM SCAN CB /WX 5 79 +30dB NoteVOL SQ DYNAMIKE Press Dim/Escape button to return to CB mode. MIN EN OFF SCAN 1.519 2 SWR MIN WX SCN IS OFF OFF NB/ANL ANL MEM SCAN ON S/ RF S/RF RF DIM SWR OFF ESC NB /ANL CAL CONTRAST RADIO CHECK SETTINGS TX 5 79 +30dB Press Menu/Enter knob and rotate clockwise to MIN OFF VOL SQ DYNAMIKE WX Alert Scan. Press Menu/Enter knob to select On/Off. MIN MIN OFF CAL RX SWR SWR 1.5 RF GAINto select DELTA On/Off TUNE NB/ANL T and BACK Press Menu/Enter knob exit CAL VOLANL SQ DYNAMIKE S/ RF to main menu. S/RF RF DYNAMIKE Setting Weather Alert Scan OFF Displays current software version and returns unit to original factory settings. To view software version, rotate Menu/Enter knob clockwise to select Settings then Software Version. Turns WX Alert On/Off. Default is Off. Press Menu/Enter knob to select Set WX Alert. If Weather is On, WX Alert Icon will be displayed. NB /ANL SWR CAL Software Version/Factory Settings Setting Weather Alert Mode Weather Alert Mode Note Default display color is green. DIM ESC MEM ER WX ! RESTORE DEFAULT DELTA TUNE YES RF GAIN NO MEM SCAN MEM SCAN T BACK CB /WX CH 9/ 19 SWR CAL DIM ESC WX ! U SH EN U P Menu/Enter TE Press knob to restore default EN MAX DELTA TUNE TOFF BACK settings. Choose MIN NORFtoGAIN maintain present setting with no change. SWR CAL NB /ANL Note NB/ANL SWR 1.5 2 3 ANL Press Dim/Escape S/RF RF buttonS/RF to return to CB mode. SWR CAL SWR/CAL VOL OFF SIG 1 SQ CAL RX 5 79 +30dB DYNAMIKE EN U SH EN U P TE SCAN CH 9/ MIN 19 MIN MAX OFF MEM SCAN CB /WX DIM ESC MEM RF GAIN DELTA TUNE T BACK SWR Press Menu/Enter knob to select On/Off and exitCAL to main menu. MIN MIN 26 29LXBT_MANL.indd 26-27 OFF AUTO SCN IS OFF ON OFF TX MAX OFF 27 2/27/12 11:14 AM Operation Operation Program Memory Channels NB-ANL/OFF (Noise Blanker/Automatic NB-ANL/OFF (Noise Blanker / Noise Limiter) Button Automatic Noise Limiter) Button Set first channel. Press and hold Scan/MemScan button. Memory icon will appear. Select second channel, press and hold Scan/MemScan button again until Memory icon appears. Repeat above steps to enter up to 10 channels in memory. CH 9/ SCAN NB/ANL Note NB/ANL SWR 1.5 ANL The RF noise blanker is very effective in reducing repetitive noises such as ignition interference. S/RF S/RF CAL CB /WX NB/ANL The radio should be squelched before scan features are activated. Note MEM SCAN 7 9 +30dB SIG 1 1.5 MEM NB/ANL SWR/CAL WX ! CAL TX When switched to ANL the3 Automatic Noise U S H SWR U PANL E N T E EN RX Limiter is activated. This helps reduce noise S/RF RF VOL SQ DYNAMIKE RF GAIN SWR created by the vehicle’s electronics. CAL 3 5 79 SIG 1 +30dB When switched to NB/ANL mode the RF Noise VOL SQ DYNAMIKE Blanker is also MAX MIN OFF activated, MIN providing increased noise filtration. When switched to OFF mode all noiseOFFfiltration MIN will be turned off. Note 19 TX RX RF Program Memory Channels S/RF SWR/CAL DELTA TUNE PU SH EN TE NU T BACK DIM ESC Keying the microphone will stop the scan feature. CH 9/ 19 SCAN MEM SCAN SWR CAL Note DIM CB /WX ESC MEM RF GAIN DELTA TUNE OFF MIN MAX If more than 10 channels are attempted to be programmed, 3 error beeps will be heard and “Memory Full” will be displayed for 10 seconds or until any button is pushed. SWR CAL T BACK OFF NB/ANL Setting Delta Tune Setting Delta Tune NB/ANL SWR 1.5 ANL S/RF S/RF SWR CAL CAL RF Rotate Delta Tune knob to the center position for 3 5 79 SIG 1 +30dB optimum tuning. RF Gain Control SQ DYNAMIKE RF Gain Control The RF Gain is used to optimize reception in OFF strong or weak signal areas. Note MEM SCAN PU SH EN TE NU MEM ESC WX ! RF GAIN MIN To remove a channel from memory, go to the unwanted memory channel then press and hold the scan button until the MEM icon turns off. DIM CB /WX SWR/CAL VOL CH 9/ 19 SCAN TX RX DELTA TUNE SWR CAL T BACK Pressing the Scan/Memory Scan button MIN OFF toggles from OffMAX to Scan All Channels to Memory Channel Only Scan and back to Off. Note If in WX mode the unit will scan Weather channels. NB /ANL Note NB/ANL SWR 1.5 ANL The RF Gain is used to optimize reception in weak signal areas. S/ RF S/RF SWR CAL 29LXBT_MANL.indd 28-29 CAL SQ SIG 1 SCAN TX CB /WX 5 79 +30dB DYNAMIKE EN CH 9/ 19 MEM SCAN RX Rotate the RF Gain knob counterclockwise to reduce gain in strong signal areas. In weak MIN signal areas turn clockwise toOFF increase gain. 28 RF SWR/CAL VOL U SH EN U P TE MEM ESC WX ! RF GAIN DIM DELTA TUNE T BACK SWR CAL Press Dim/Escape button to end Scan and OFF MAX returnMINto CB mode. 29 2/27/12 11:14 AM Operation Operation Setting Squelch To scan all 40 CB channels, the unit must be squelched. Press and release Scan/Mem Scan button once. Squelch is the “control gate” for incoming signals. S/RF S/RF SWR CAL CAL SQ DYNAMIKE Scan Memory Channels VOL OFF EN PU SH EN TE Scan Memory Channels RF GAIN DELTA TUNE T BACK To scan memory channels, press and release Scan/Mem Scan button twice. MAX MIN MIN CH 9/ 19 S/RF SWR CAL CAL SQ TX STRONG SIGNALS RX RF SWR/CAL VOL SIG 1 5 79 +30dB DYNAMIKE EN U SH EN U P TE ME MEDIUM SIGNALS MEM SCAN CB /WX 5 79 +30dB SIG 1 SWR/CAL CB SCAN 27.405 TX RX RF SCAN NB/ANL SWR 1.5 ANL NB/ANL Gate closed NB /ANL S/ RF NB/ANL SWR 1.5 ANL Setting Squelch Scan CB Channels DIM ESC OFF WEAK SIGNALS MIN SWR CAL Full clockwise rotation closes the gate allowing only very strong signals to enter. NOISE G AT E C L O S E D Scan CB Channels OFF NB/ANL S/RF S/RF SWR CAL CAL SQ DYNAMIKE Dimmer Control PU SH EN TE NU CH 9/ 19 Gate open MEM SCAN CB /WX 5 79 +30dB SIG 1 SCAN CB MEM SCAN 27.405 TX RX RF SWR/CAL VOL NB/ANL SWR 1.5 ANL DIM ESC MEM STRONG SIGNALS RF GAIN DELTA TUNE Dimmer Control T BACK SWR CAL MEDIUM SIGNALS NB /ANL S/RF SWR CAL RF SWR /CAL VOL OFF SQ CAL MIN SIG 1 SCAN TX MIN RX CB /WX 5 79 +30dB DYNAMIKE PU SH EN TE NU ESC WX ! RF GAIN WEAK SIGNALS OFF DIM DELTA TUNE T BACK SWR CAL Press Dim/Esc button to toggle between day Full counterclockwise rotation opens the “gate” allowing all signals in. and night settings. See setting instructions on page 21. MIN OFF MAX MIN 30 29LXBT_MANL.indd 30-31 MEM CH 9/ 19 MAX MEM SCAN NOISE G AT E OPEN NB/ANL SWR 1.5 ANL OFF S/ RF 31 2/27/12 11:14 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Modify Date : 2012:04:26 11:00:29-04:00 Create Date : 2012:04:26 11:00:12-04:00 Metadata Date : 2012:04:26 11:00:29-04:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Format : application/pdf Title : 29LXBT_MANL.indd Document ID : uuid:74b4d1bc-7f5f-4064-8cc1-11a8d53b8e47 Instance ID : uuid:9ddc4856-af52-43ac-8dd0-aa80112bb1ab Producer : Adobe PDF Library 9.9 Page Count : 4 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools