Cobra Electronics 0K29BT2K12 BLUETOOTH ACCESSORY FOR CB User Manual 29LXBT MANL indd
Cobra Electronics Corporation BLUETOOTH ACCESSORY FOR CB 29LXBT MANL indd
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
Users Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1684323 |
| Application ID | JnwTA1N1wckfipVLcpQXrQ== |
| Document Description | Users Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 338.6kB (4232488 bits) |
| Date Submitted | 2012-04-26 00:00:00 |
| Date Available | 2012-04-26 00:00:00 |
| Creation Date | 2012-04-26 10:59:47 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2012-04-26 10:59:56 |
| Document Title | 29LXBT_MANL.indd |
| Document Creator | Adobe InDesign CS5 (7.0.4) |
Operation Operation Menu Mode Using the clock, alarm and countdown functions. To set the clock, press Menu/Enter knob and select Set Clock. Used to program special features. Menu/Enter knob is used to move cursor to desired feature to program. NB/ANL Note Use Dim/Escape button to exit from any routine back to CB standby mode. S/RF S/RF SWR CAL VOL NB/ANL SWR 1.5 ANL CAL SET CLOCK ALARM CLOCK SET COUNT DOWN TX RX RF 5 79 +30dB SIG 1 SWR/CAL SQ DYNAMIKE EN OFF ANL Press Menu/Enter knob to select feature to be S/RF RF programmed. S/RF S/ RF S/RF SWR CAL CAL SQ 5 79 +30dB SIG 1 S/RF SWR CAL SWR/CAL U SH EN U P DYNAMIKE S/RF EN OFF S/RF SWR CAL RF SWR /CAL VOL SQ CAL S/RF MIN 5 79 +30dB DYNAMIKE WX ! S/RF SWR CAL MIN OFF SWR/CAL U SH EN U P TE VOL OFF SIG MEM WX ! Level 5: VOL OFF 29LXBT_MANL.indd 16-17 SQ TX OFF SIG 1 MINMIN 5 79 +30dB DYNAMIKE MAX PU SH EN TE NU SWR RF GAIN CAL Level 4: SCAN NB/ANL ANL MEM SCAN CB /W S/RF PA SWR PU SH EN CALT E R CH 9/ 19 SWR CB /WX/ PA DELTA TUNE MIN 1.5 2 MEM WX ! SIG SWR CAL RF GAIN T BACK CAL NW LIGHTING CONTRAST MAX MIN DIM RF RADIO CHECK ESC T BACK RX OFF /WX/ CB DELTA TUNE CH 9/ 19 DYNAMIKE MAX CB /WX CH 9/ 19 PA ESC Note DIM ESC OFF CH 9/ 19 MEM SCAN CB /WX DIM ESC WX ! DELTA TUNE T BACK Your 29 LX can be utilized as an alarm clock. To set the alarm, press Menu/Enter knob and SWR select Set Alarm. CAL SWR CAL DIM ESC MAX MIN CH 9/ 19 SET CLOCK ALARM CLOCK SET COUNT DOWN DIM ESC T BACK P USWR H EN CAL EN MEM Setting the Alarm RF GAIN MEM SCAN 5 79 +30dB SCAN SCAN TX MEM SCAN MIN DIM TE MEM OFF SCAN Setting the Alarm CH 9/ 19 MEM SCAN CB /WX DIM ESC WX ! RotateR Menu/Enter knob clockwise to select Set SWR RF GAIN DELTA TUNE T BACK Alarm Time. Follow instructions above for settingCAL the alarm time and AM or PM. WX ! RF GAIN DELTA TUNE OFF MIN MEM SCAN WX ! 16 MIN MEM SETTING VOL SQ BLUETOOTH OFF EXIT MEM SCAN TONES DYNAMIKE WX ALERT DIM WX ALERT SCAN ESC T BACK SWR/CAL RFDYNAMIKE GAIN DELTA TUNE SQ CAL EN PU SH EN TE NU OFFX/ +30dB RX RF SWR/CAL U SH EN U P TE CAL TX WX AUTO SCAN RX COLOR S/RF DISPLAY RF MINMIN MAX S/RF SWR CAL BRIGHTNESS 3 5 79 EN NB/ANL SWR 1.5 ANL S/RF PA DYNAMIKE RF GAIN DELTA TUNE NB/ANL NB/ANL OFF EN CB /WX/ CB /WX SCAN SET AM-PM 11:30 PM EXIT TX CH 9/ 19 SCAN Note Use Dim/Escape button to exit MEM WX ! PU SH EN TE 12:00R PM will appear in the display and the hours from any routine back to CB RFMenu/Enter GAIN DELTA TUNEclockwise T BACK to SWR standby mode. will flash. Rotate knob RX VOLMEM SCAN SQKEY NB/ANL SWR 1.5 ANL TX RX SIG 1 MEM SQ Level 3: NB/ANL CAL TX SET CLOCK RX ALARM CLOCK RF SET COUNT DOWN 3 5 79 SIG +30dB VOL NB /ANL NB/ANL SWR 1.5 ANL TE Level 2: SWR/CAL NB/ANL SWR 1.5 ANL TX RX RF SWR /CAL VOL NB/ANL SWR 1.5 ANL S/ RF Level 1: NB/ANL CAL 5 79 +30dB SIG 1 Note Normal display will appear if clock has not yet been set. The minutes will then flash. Rotate Menu/Enter knob The radio should be connected again to select desired minutes and press toOFFset. to a constant 12V source to MAX MIN maintain the time when the Once the minutes are set, AM or PM will then flash. Rotate Menu/Enter knob again to select AM radio is turned off. or PM and press to set or scroll down to EXIT and press to return to main menu. NB/ANL SWR CAL MEM SCAN select desired hour and press to set. MIN NB/ANL SWR 1.5 SCAN CH 9/ 19 CAL Rotate Menu/Enter knob clockwise to navigate menu levels. NB /ANL Setting the Clock Setting the Clock Menu Mode T BACK MIN MAX OFF SWR CAL MIN MAX OFF 17 2/27/12 11:14 AM Operation Operation Setting the Alarm continued /ANL NB/ANL SWR 1.5 Note ANL CAL Allows testing of important radio functions. Test 1- Battery Level: Confirms that battery voltage level is between 10.8 V to 15.8 V. If in that range, it is “PASS”. Outside of that range, either FAIL LOW” or “FAIL HIGH” will be displayed. Press Menu/Enter knob to advance to next test. CH 9/ 19 SCAN EXIT SET SNOOZE ALARM LENGTH TX MEM SCAN RX Default snooze time length S/RF RF DIM SWR is 10 minutes. CB /WX CAL ESC 3 5 79 SIG +30dB Note R/CAL MEM WX ! PU SH EN ER EN Press Dim/Escape button to Enter desired snooze time (from 1 to 60 minutes). SWR VOL SQ RF GAIN DELTA TUNE return toDYNAMIKE CB standby mode. Select Enter to exit, return to Set Snooze orBACK Alarm CAL Length. Select Alarm Length to set alarm duration Note (from 10 to 300 seconds). Pressing Menu/Enter Default alarm length knob returns unit to exit, Set Snooze or Alarm is 60 seconds and is set in MAX MIN OFF OFF MIN Length. 10 second increments. /RF S/RF SWR CAL OFF CAL SQ 5 79 +30dB DYNAMIKE EN U SH EN U P TE MEM ESC WX ! NB/ANL NB/ANL Note Press Dim/Escape NB/ANL SWR 1.5 2 button to return to CB mode.CAL ANL VOL NB/ANL OFF 5 79 +30dB DYNAMIKE SQ DYNAMIKE PU SH EN TE NU MEM DIM S/RF 29LXBT_MANL.indd 18-19 VOL MIN MAX EN SCAN 19 RF POWER OUTPUT FAILDIM CB /WX/ CB /WX/ U SH EN U P TE PA ESC MEM MINMIN MAX ANTENNA RF PASS CAL OFF MAX MIN DIM ESC Note SWR Press button to T BACKDim/Escape CAL return to CB standby mode. If 10 seconds pass or if Enter button pressed, testing is OFF complete. Unit will return to CB Standby mode. WX ! SWR Test 3- DYNAMIKE Antenna Mismatch Warning: Press DELTA TUNE SQ RF GAIN RF GAIN DELTA TUNE T BACK CAL Push-to-Talk button to check antenna/radio for proper matching. CH 9/ 19 MEM SCAN NB/ANL ESC CAL TX NB/ANL SWR 1.5 ANL Press Menu/Enter knob to select On/Off and SWR S/RF RF DELTASWR TUNE T BACK CAL exit to main menu. RF GAIN CAL 3 5 79 SIG 1 +30dB 18 MIN VOL CH 9/ SCAN MEM SCAN PA 3 5 79 SIG 1 +30dB MEM WX ! SWR/CAL U SH EN U P TE EN OFF SWR/CAL OFF S/RF SWR CAL MEM SCAN CB /WX NB/ANL SWR 1.5 2 ANL WX ! CAL TX RF POWER OUTPUT RX RF PASS CH 9/ 19 SCAN SET KEY TONES ON OFF RX RF SQ SWR/CAL Press Menu/Enter knob and rotate clockwise to Set Key Tones. Press Menu/Enter to set Key OFF MIN Tones On/Off. TX NB/ANL SWR 1.5 ANL S/RF Key Tones Mode On and Off VOL NB /ANL SWR/CAL MAX MIN Key Tones Mode SIG 1 Note Press Push-To-Talk within 10 seconds or unit will go to the next test. Note Press Dim/Escape button to return to CB standby mode. If 10 seconds pass or if Enter button pressed, go to 3rd test. DIM CB /WX Follow instructions in Setting the Clock section SWR RF GAIN DELTA TUNEandT BACK CAL (page 17) to set count down hour NB/ANL SWR 1.5 2 CAL TX minutes. Once desired count down time is ANL RX selected, press Menu/Enter knobS/RF again RF to set SWR CAL and return to the standby menu. 3 5 79 SIG 1 +30dB MIN S/RF SWR CAL Test 2- RF Power Output: Confirms 3.3 to 4 Watt output level. Once Push-to-Talk button is pressed, Pass or Fail will be displayed if level is outside limits. MEM SCAN S/RF S/RF CH 9/ 19 SCAN SET CLOCK SET ALARM SET COUNT DOWN TX RX Dim/Escape button to return to CB standby mode. SIG 1 To set the count down timer, press Menu/Enter knob and select Set Count Down. RF Press AL VOL NB/ANL SWR 1.5 Note ANL Note Press Dim/Escape button to return to CB standby mode. If 10 seconds pass or if Enter button pressed, unit goes to 2nd test. Setting the Count Down Timer Setting the Count Down Timer Radio Check Mode Radio Check Mode Once alarm settings are complete, rotate Menu/Enter knob clockwise to Set Snooze and press to select. SQ DYNAMIKE RX S/RF S/RF SWR CAL VOL SQ SCAN FAILDIM PA CB /WX/ DYNAMIKE RF GAIN EN U SH EN U P TE DELTA TUNE PA ESC MEM DIM ESC WX ! SWR RF GAIN CAL T BACK CH 9/ 19 MEM SCAN MEM SCAN CB /WX/ 3 5 79 SIG 1 +30dB MEM WX ! SWR/CAL U SH EN U P TE EN CH 9/ 3 SCAN 19 ANTENNA TX RX 19 DELTA TUNE T BACK SWR CAL OFF OFF MIN OFF MINMIN MAX OFF MIN MAX OFF 2/27/12 11:14 AM Operation Operation Setting Display Color Mode Setting Display Color Mode Press Menu/Enter knob to select Set Brightness NB/ANL SWR 1.5 ANL S/RF S/RF SWR CAL 2CAL RF SIG 1 SWR/CAL 5 79 +30dB EN VOL SQ PU SH EN MEM MEM SCAN DIM CB /WX ESC WX ! ER Press and release Menu/Enter to set the Tcolor. RF GAIN DELTA TUNE BACK DYNAMIKE MAX MIN MIN Note To select day or night levels, press and release Dim/Escape button once levels are set. To set the day bright level, turn the Menu/Enter knob clockwise to a desired setting and then press Menu/Enter. To set the Night-Dim level, repeat instructions above then select Night-Dim. SWR CAL OFF Note Exit will return to menu mode. ESC will exit and return to CB Standby. CH 9/ 19 SCAN WX AUTO SCAN DISPLAY COLOR BRIGHTNESS TX RX Note If an attempt is made to exceed the highest or lowest brightness levels, 1 error beep will be heard. Rotate Menu/Enter knob clockwise to Select Brightness. Press Menu/Enter knob to select DayBright. Turn Menu/Enter clockwise to increase brightness and turn counter-clockwise to decrease brightness. Press Menu/Enter knob and scroll down to select Display Color. NB /ANL Setting Brightness Mode Setting Brightness Mode OFF TURN CH KNOB TO SET LEVEL Rotating Menu/Enter knob clockwise changes the display color from green to blue to amber to red then back to green. Press Menu/Enter knob again to exit routine. Turn NightWatch Illumination On-Off-Hi-Lo Turn NB /ANL Note NB/ANL SWR 1.5 2 3 4 CAL TX Select EXITANL to return to RX S/RF S/RF RF main menu. SWRPress Dim/Escape CAL 3 5 79 +30dB button to returnSIG to CB mode. SWR/CAL VOL SQ DYNAMIKE SCAN TURN CH KNOB TO MEM SCAN SET COLORNB /ANL NB/ANL SWR 1.5 EXIT CB /WX PU SH EN TE NU MEM ANL WX ! S/ RF MIN MIN DIM ESC S/RF SQ DYNAMIKE OFF MAX OFF 20 29LXBT_MANL.indd 20-21 CAL RF Press Menu/Enter knob or escape SWR SWR RF GAIN DELTA button TUNE Tagain BACK CAL CAL 3 5 79 SIG 1 +30dB to exit routine. SWR /CAL VOL OFF Press Menu/Enter knob and scroll down to select NW Lighting. CH 9/ 19 MIN NW LIGHTING CONTRAST RADIO CHECK TX RX PU SH EN TE NU MEM SCAN MEM SCAN CB /WX/ PA WX ! RF GAIN DELTA TUNE T BACK NW IS SET HI HI-LO-OFF Press Menu/Enter knob again to exit routine. MIN MAX CH 9/ 19 NightWatch Illumination On/Off Note To select HI-LO-OFF, turn ESC menu knob to select and press and release Enter knob. SWR DIM CAL OFF 21 2/27/12 11:14 AM Operation Operation Setting Contrast Mode III. Successful pairing will be indicated by a tone to confirm entry to Connected mode. A pair record will also be established for subsequent connections. B. Subsequent pairings with a cell phone: I. Follow any cell phone manufacturer instructions if needed, to enable the Bluetooth function. II. Successful pairing will be indicated by a tone to confirm entry to Connected mode. Setting Contrast Mode Press Menu/Enter knob and rotate clockwise to select Set Contrast. Press Menu/Enter knob again and rotate clockwise to increase contrast, counter-clockwise to decrease contrast. Press Menu/Enter knob to set contrast. Note If an attempt is made to exceed the highest or lowest contrast levels, 1 error beep will be heard. TURN CH KNOB TO SET CONTRAST Press Menu/Enter knob again to exit routine. Bluetooth® Bluetooth® Calls on a Bluetooth enabled cell phone can be routed through the 29 LX BT speaker or external speaker accessory. Note When cell phone calls are in progress using the Bluetooth features, the CB functions of the NB/ANL SWR 1.5 2 CAL TX ANLunit are disabled. NB /ANL S/RF S/RF RF SWR Note CAL DualSIG Point WR /CAL VOL RX 3 5 79 +30dB Bluetooth: Two cell phones can be pairedM E N U SQ and used DYNAMIKE and for team drivers. SCAN READY FOR PAIRING PW 0000 PU SH EN MEM ER BT Button CH 9/ 19 DIM MEM SCAN CB /WX ESC WX ! RF GAIN DELTA TUNE T BACK SWR 2 CAL Note OFF If no further pairing steps are taken, the unit will time-out MIN and return to Standby after five minutes. During the pairing process, press and release the BT Button to cancel the pairing process. To Pair with a Cell Phone With 29 LX BT MIN power On,MAX press and hold theOFF BT Button for six seconds to enter Standby mode. A tone will sound to confirm entry to Standby. A. First time pairing with a cell phone: I. A tone will sound to confirm Pairing mode. II. Follow the cell phone manufacturer’s instruction to enable its Bluetooth function and enter the PIN (Personal Identification Number) 0000. Note For Text-to-Speech conversion, an app should be downloaded to your cell phone. 22 29LXBT_MANL.indd 22-23 To Answer Calls Press and release the BT Button when the cell phone ring is heard through the 29 LX BT speaker. Speak into the 29 LX BT microphone. The CB function of the unit and PTT Button will be disabled while a call is in progress. Press and release of the BT Button to end the call. A tone will sound. To Initiate Calls Dial a number according to the cell phone manufacturer’s instructions. The key press and other tones will be heard through the 29 LX BT speaker. Press Send on the cell phone send key a few seconds, you will hear the ring tone for the number you dialed on the CB speaker. Once connected, speak into the microphone. Press and release of the BT Button to end the call. A tone will sound. Press and hold the BT Button for two seconds to redial a number. A tone will sound; and after a few seconds, you will hear the ring tone for the number you dialed. Note When cell phone calls are in progress using the Bluetooth features, the CB functions of the unit are disabled until the phone call is put on hold (see page 24). Note The external microphone (see accessories on page 35) can be plugged into the rear of the unit and clipped to a pocket or lapel for hands-free speech during calls. When the microphone is plugged in, the main microphone will not pick up speech during calls but will be fully functional for CB operation. To Enable or Disable Voice Dialing If the paired cell phone supports voice dialing, press and release the BT Button twice to toggle between enabling and disabling this feature. 23 2/27/12 11:14 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Modify Date : 2012:04:26 10:59:56-04:00 Create Date : 2012:04:26 10:59:47-04:00 Metadata Date : 2012:04:26 10:59:56-04:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Format : application/pdf Title : 29LXBT_MANL.indd Document ID : uuid:a11400c9-12fc-48a8-9f25-d9a2b95ef70c Instance ID : uuid:8f7b4e72-9609-4945-a458-1cc3c0278bdb Producer : Adobe PDF Library 9.9 Page Count : 4 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools