Cochlear CP81000 Wireless Hearing Aid User Manual 195992 Iss3 CP810 user guide 01 nu

Download:
Mirror Download [FCC.gov]
Document ID	1137249
Application ID	rg97xWSc2e4HROFEPeDvRw==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.99kB (974933 bits)
Date Submitted	2009-07-10 00:00:00
Date Available	2009-10-10 00:00:00
Creation Date	2009-06-10 12:59:46
Producing Software	GNU Ghostscript 7.05
Document Lastmod	2009-06-10 13:09:15
Document Title	195992 Iss3 CP810 user guide 01.nu.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	wmeskens

Wearing your processor
Identifying your processors
If you are a bilateral recipient, you may want to use Cochlear™ Nucleus®
CP800 Series Bilateral Identification Adhesive Labels to reduce the
risk of mixing up processors. The labels are available in two colours to
help identify your left (blue) and right (red) ear processors. For more
information, contact your clinician.
To place the label on your processor:
1.
Remove the earhook from
the processing unit by
rotating it.
2.
Place the label on the
earhook end (tip) of the
processing unit. It should
stick easily.
3.
Attach the earhook by
pushing the lower end of
the earhook back onto the
processing unit.
If you want to remove the label from the processing unit, you can easily
peel it off with your fingers.
26 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 26
© Cochlear Limited 2009
13/05/2009 4:24:24 PM
Detaching and attaching the
battery module
You need to detach the battery module from the processing unit
when:
•
Changing the battery module to a different one (e.g. changing
from a standard battery module to a rechargeable battery
module).
•
Changing the wearing option (e.g. using the LiteWear cable to
attach the battery module to the processing unit).
•
Charging the rechargeable battery module.
Detaching the battery module from the
processing unit
To detach the battery module from the processing unit:
1.
Hold the battery module
and the processing unit
as shown. If the battery
module is locked, you need
to unlock it as described
in the section Locking
and unlocking the battery
module.
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 27
2.
Gently twist the battery
module to your left and
the processing unit to your
right until the two parts
separate.
CP810 Sound Processor User Guide - 27
13/05/2009 4:24:27 PM
Detaching and attaching the battery module
Attaching the battery module to the processing
unit
To attach the battery module to the processing unit:
1.
Hold the battery module
and the processing unit so
they touch. The battery
module should face to the
left and the processing unit
to the right of the final
position.
3.
Make sure the battery
module is correctly aligned.
Check for broken or bent
contacts between the
battery module and the
processing unit, which can
cause misalignment. If
any contacts are broken,
return the processor to your
clinician.
28 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 28
2.
Twist the battery module
and the processing unit
until the two parts fit into
place.
© Cochlear Limited 2009
13/05/2009 4:24:31 PM
Using your processor
This section describes how to use the buttons on your processor. The
sequence of button presses that are described in each of the sections
below are part of the Simple user interface. If your processor has the
Advanced user interface enabled, see Advanced user interface for
information on the processor functions you can control and the button
press sequences.
Turning your processor on and off
To be able to hear sound from your processor, the processor needs to be
turned on and the coil needs to be connected to the implant. To turn on
your processor, press and hold the lower button for at least one second
until you either hear sounds (if your processor is in place on your head),
or until you see short flashes of green. The number of flashes you see
corresponds to the number of the current program (e.g. if your current
program is program 2, you see two flashes). For more information on
programs, see the following section.
To turn off, press and hold the lower button for at least one second,
until the sound stops, or you see a steady orange light. Do not remove
batteries, or detach the battery module to turn off your processor.
Changing programs
Programs help you hear better in different listening situations. Up to
four programs can be enabled by your clinician, depending on your
listening needs. The four programs are:
•
Everyday: Ideal for the typical listening situations of everyday life. It
can adjust the sounds you hear for maximum clarity and comfort.
•
Noise: Suitable for environments with significant background
noise, improving the audibility of wanted sound from all sides.
•
Focus: Useful where there is significant background noise, but the
focus is on hearing what one person or a small group of people are
saying.
•
Music: Used to listen to all types of music from any audio source.
You can change programs to suit your listening situation (e.g. use the
Music program when listening to music).
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 29
CP810 Sound Processor User Guide - 29
13/05/2009 4:24:37 PM
Using your processor
To change the current program:
1.
If the processor is turned off, turn it on.
2.
Press the lower button until the program changes to the one you
want.
Each successive button press changes the program to the next one (e.g.
to change from program 1 to program 2, press once). The number of
green light flashes you see corresponds to the number of the selected
program (e.g. after you change from program 1 to program 2, you see
two short flashes of green). If private tones are enabled, you hear two
private tones.
The program you select operates until you change it. When you turn
your processor off and on again, it will return to the program and
settings you were using before you switched it off.
Understanding indicator lights
You see an indicator light when you perform a function (e.g. change the
program), or when there is a problem (e.g. processor battery is empty).
Indicator light
What it means
Short flashes of green
You are turning on the processor.
with a pause between flashes. The number of flashes you see
corresponds to the number of the
selected program.
You are changing the program.
The number of flashes you see
corresponds to the number of the
selected program.
Short flashes of green with a
pause between flashes.
Steady orange while
You are turning off your processor.
the lower button is pressed.
Short flash of green.
You are changing volume or
sensitivity level. This is available only
with the Advanced user interface.
30 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 30
© Cochlear Limited 2009
13/05/2009 4:24:37 PM
Using your processor
Indicator light
Long flash of green.
What it means
You are changing from using:
•
The microphones to using the
telecoil.
•
The telecoil to using the
microphones.
•
The microphones to using an
audio accessory.
•
Flash of green followed
by a flash of orange.
Flash of orange followed
by a flash of green.
Flashes of green.
Flash of orange
every second.
Steady orange.
An audio accessory to using the
microphones.
You are locking your processor
buttons.
You are unlocking your processor
buttons.
Indicates that the microphones are
capturing sound.
The coil may be off, or your processor
is not connected to the correct
implant.
Indicates a general fault.
If a general fault and coil off This could mean:
error occur at the same time,
There is a fault with your
you only see the general fault •
processor.
indicator light (steady orange
light).
•
There is a corrupt program in
your processor.
Flash of orange when you
press a button.
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 31
The Troubleshooting Guide provided
with your processor documentation
helps you troubleshoot basic
processor problems.
Your processor buttons are locked.
CP810 Sound Processor User Guide - 31
13/05/2009 4:24:37 PM
Using your processor
Indicator light
What it means
Continuous flashes
of orange with a short pause
between flashes.
Your processor battery is empty.
You need to replace the disposable
batteries, or recharge the
rechargeable battery module.
If a battery empty warning
and general fault occur at
the same time, you only see
the battery empty indicator
light (continuous flashes of
orange).
Understanding private tones
When private tones are enabled, you hear a tone when you perform
a function (e.g. change the program), or when there is a problem (e.g.
processor battery is empty). Private tones can be heard only by you.
Tone
What it means
You hear short high
tones.
You hear a single high
tone.
..
You hear a single long
high tone.
32 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 32
You are changing the program.
The number of tones you hear
corresponds to the number of the
selected program (e.g. when you
change from program 1 to program
2, you hear two high tones).
You are changing microphone
volume or sensitivity level
(Advanced user interface only)
You are changing from using:
•
The microphones to using the
telecoil.
•
The telecoil to using the
microphones.
•
The microphones to using an
audio accessory.
•
An audio accessory to using
the microphones.
© Cochlear Limited 2009
13/05/2009 4:24:38 PM
Using your processor
Tone
.. ..
What it means
You hear a
sequence of long low tones.
General fault.
You hear a short low tone
when you press a button.
Your processor buttons are locked.
You hear two short
low tones.
Your processor battery is low. You
need to replace the batteries, or
recharge the battery module.
Your processor battery is empty.
You need to replace the batteries,
or recharge the battery module.
You hear a sequence
of short low tones.
Using the telecoil
The telecoil is used to receive sound signals from a telephone,
roomloop, neckloop, etc. The telecoil can also receive sound signals
from an amplifier, TV or Hi-Fi through an induction loop.
To turn on the telecoil, press the upper button. A single long flash of
green confirms that the telecoil is activated.
To turn off the telecoil, press the upper button again. A single long flash
of green confirms that the telecoil is deactivated.
When an audio accessory is connected to your processor, you will not
receive any sound from the telecoil. To move back to using the telecoil,
remove the audio accessory from the processor.
Turn off the telecoil when not in use, as it reduces the microphone
volume.
Using Auto Telecoil
Your clinician can program your processor so that it automatically
turns on the telecoil when you use the telephone, or when you are in a
roomloop environment. The telecoil automatically turns off when:
•
You move the telephone away from your processor (e.g. when the
telephone call ends).
•
You exit the roomloop environment.
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 33
CP810 Sound Processor User Guide - 33
13/05/2009 4:24:38 PM
Using your processor
When Auto Telecoil is turned on, you see the Auto Telecoil icon on the
remote assistant Home screen.
Focus
Music
AUTO
Noise
Everyday
Figure 9: Auto Telecoil icon displayed on the remote assistant Home screen
You can manually turn off Auto Telecoil by pressing the upper button
on the processing unit. You can also manually turn this feature on or
off using the remote assistant. For more information, see the Remote
Assistant User Guide.
Certain electronic devices or machinery may automatically turn
on Auto Telecoil. If this occurs, either wait for about 10 or 20
seconds for Auto Telecoil to turn itself off, or manually turn it off
using the processor buttons or the remote assistant.
Using the telephone with your processor
You may use your telephone and your processor with the:
•
Microphones.
•
Telecoil.
•
Telecoil and microphones on at the same time.
When using the telephone, position the telephone so that its earpiece is
aligned with your processor.
Changing loudness of sounds
Microphone sensitivity and volume control the loudness levels of the
sounds you hear.
34 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 34
© Cochlear Limited 2009
13/05/2009 4:24:38 PM
Using your processor
Depending on how your clinician has set up your programs, you can use
the processor buttons (Advanced user interface only) to:
•
Change microphone sensitivity only.
•
Change volume only.
The new microphone sensitivity or volume levels you choose will be
saved for each program.
Controlling microphone sensitivity
Microphone sensitivity controls the softest level of sound picked up by
the microphones.
If your clinician has enabled you to change the sensitivity, you can:
•
Reduce the sensitivity of the sound to reduce background noise in
noisy situations.
•
Increase the sensitivity of the sound to hear very soft sounds in
quiet situations.
If your clinician has enabled the Advanced user interface, you can press
the upper button to increase sensitivity. To decrease sensitivity, press
the lower button. When you change sensitivity level, you see a flash of
green.
If your processor has the Simple user interface, you can use the remote
assistant to change sensitivity.
Controlling microphone volume
Microphone volume controls your perception of loudness. If your
clinician has enabled you to change the volume, you can:
•
Reduce the volume if sounds are uncomfortably loud.
•
Increase the volume if speech, including your own voice, is too
soft.
If your clinician has enabled the Advanced user interface, you can press
the upper button to increase volume. To decrease volume, press the
lower button. When you change volume level, you see a flash of green.
If your processor has the Simple user interface, you can use the remote
assistant to change the volume.
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 35
CP810 Sound Processor User Guide - 35
13/05/2009 4:24:38 PM
Using your processor
If you are adjusting the volume setting often, or if adjusting the volume
causes you discomfort, consult your clinician.
Locking and unlocking processor buttons
You can lock the buttons on your processor to prevent children from
changing the controls, or to avoid accidental button presses changing
your processor settings.
To lock the buttons, briefly press both the upper button and the lower
button at the same time.
A flash of green followed by a flash of orange confirms that your
processor buttons are locked. If you press any button on the processing
unit when it is locked, you see an orange flash.
You cannot turn off your processor while the buttons are locked.
To unlock the buttons, briefly press both the upper button and the lower
button at the same time. A flash of orange followed by a flash of green
confirms that the buttons are unlocked.
Advanced user interface
If your clinician has enabled the Advanced user interface, you can use
your processor buttons to perform the following functions:
Function
Button press sequence
Turn your processor on and
off.
Press and hold the upper button
and the lower button at the same
time. Pressing and holding the lower
button only will also turn on the
processor.
Press and hold the lower button.
Press and hold the upper button.
Change your program.
Turn the telecoil/audio
accessory (when connected)
on and off.
Lock and unlock processor
buttons.
36 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 36
Press the upper button and the
lower button at the same time.
© Cochlear Limited 2009
13/05/2009 4:24:38 PM
Using your processor
Function
Button press sequence
Adjust microphone volume or Press the upper button to increase
sensitivity level.
volume or sensitivity level.
Press the lower button to decrease
volume or sensitivity level.
Discuss with your clinician which user interface would be more suitable
for you.
Checking the coil
The remote assistant has an in-built coil sensor that allows you to check
if the coil connected to your processor is receiving sound signals from
your processor.
To use the coil sensor:
1.
Remove the coil from the head.
2.
Place the coil on the coil sensor guides on the back of the remote
assistant.
Figure 10: Placing the coil on the back of the remote assistant
If the coil is receiving sound signals, an animation will display on the
remote assistant display. This, however, only provides an indication and
does not confirm that the coil is functioning properly.
If the coil is not receiving sound signals, no response is displayed on the
display.
For more information, refer to the Remote Assistant User Guide.
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 37
CP810 Sound Processor User Guide - 37
13/05/2009 4:24:38 PM
38 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 38
© Cochlear Limited 2009
13/05/2009 4:24:41 PM
Replacing and recharging batteries
Replacing disposable batteries
The Standard Battery Module uses two disposable batteries. It is
recommended that you use two p675 zinc air batteries for maximum
battery life.
Replace disposable batteries when any of the following occur:
•
You see continuous flashes of orange on your processor.
•
You hear two short low tones (battery is low) or a sequence of
short low tones (battery is empty).
•
The processor battery low or battery empty icon displays on the
remote assistant screen.
•
You stop hearing sound.
•
The sound you hear becomes intermittent.
An empty battery may not be the only cause for not hearing
sound, or for sound becoming intermittent. For information on
identifying and troubleshooting processor problems, refer to the
processor Troubleshooting Guide you received with your processor
documentation.
To remove disposable batteries:
1.
Turn off your processor.
If the battery module or
battery cover is locked,
unlock it.
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 39
2.
Pull the battery cover away
from the battery holder as
shown.
CP810 Sound Processor User Guide - 39
13/05/2009 4:24:41 PM
Replacing and recharging batteries
3.
To remove the batteries, tip the battery holder to one side (1), or
lift each battery out with your fingers (2) as shown.
You can also use the coil magnet to remove batteries from the battery
holder.
To remove batteries using the coil magnet:
1.
Place the coil magnet over the batteries so that the coil magnet
touches both batteries. The coil magnet will lift both batteries
out of the battery holder.
2.
Pull the batteries away from the coil.
To replace batteries:
1. Remove the new set of batteries from their pack. New batteries
are sealed, usually with a seal or tab.
2.
To allow the air to activate the batteries, remove their seals and
let the batteries stand briefly.
40 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 40
© Cochlear Limited 2009
13/05/2009 4:24:43 PM
Replacing and recharging batteries
3.
Insert batteries with the
positive terminal facing up
and the negative terminal
facing down. The batteries
should fit into the curved
recess in the battery holder.
Do not force the batteries
into place. When inserted
correctly, they should fit
easily.
Positive terminal (1) and negative
terminal (2) of zinc air batteries.
4.
Replace the battery cover by sliding it up from the bottom of
the battery holder towards the processing unit. Do not force the
cover upwards as it should fit easily.
Recharging the rechargeable battery module
Cochlear supplies a Cochlear™ Nucleus® CP800 Series Battery Charger
to recharge the rechargeable battery module. A Cochlear™ Nucleus®
CP800 Series Global Power Adaptor is also supplied to connect the
battery charger to mains power. The battery charger also allows you to
recharge the remote assistant at the same time.
To get the longest battery life, always fully recharge the rechargeable
battery module before using it. A completely empty battery will take
© Cochlear Limited 2009
195992 Iss3 CP810 user guide 01.indd 41
CP810 Sound Processor User Guide - 41
13/05/2009 4:24:50 PM
Replacing and recharging batteries
approximately four hours to recharge. As the battery ages, it may take
longer to fully recharge it. The battery charger has four sockets allowing
you to recharge four rechargeable battery modules at the same time.
To recharge the rechargeable battery module:
1.
Remove the rechargeable
battery module from the
processing unit.
3.
Rotate the rechargeable battery module in a clockwise direction
until it is fully aligned with the alignment indicator marking on
the charger.
4.
Connect the Global Power
Adaptor to the battery
charger.
42 - CP810 Sound Processor User Guide
195992 Iss3 CP810 user guide 01.indd 42
2.
5.
Insert the rechargeable
battery module into the
battery charger socket at a
slight angle as shown.
Plug the other end of the
Global Power Adaptor into a
mains power outlet.
© Cochlear Limited 2009
13/05/2009 4:24:54 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:06:10 13:09:15-04:00
Create Date                     : 2009:06:10 12:59:46-04:00
Metadata Date                   : 2009:06:10 13:09:15-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : 195992 Iss3 CP810 user guide 01.nu.pdf
Creator                         : wmeskens
Document ID                     : uuid:67e842a5-d578-411c-a769-7aba29a2bcd2
Instance ID                     : uuid:aad8683f-37f6-442f-9f22-ce1bd02cc4fd
Producer                        : GNU Ghostscript 7.05
Has XFA                         : No
Page Count                      : 17
Author                          : wmeskens

EXIF Metadata provided by EXIF.tools