Codan 3040 Automatic Whip Antenna EN1

User Manual: Codan 3040 Automatic Whip Antenna HF Antennas & Masts | LMR & HF Radio | Codan Radio

Open the PDF directly: View PDF .
Page Count: 2

www.codanradio.com © Copyright 2014

 FEATURES AT A GLANCE

 2 to 30 MHz

 125 W PEP

 Fast tuning 1 sec average

 Memory tune <150 ms

 Supports ALE and Frequency

Hopping modes

 Integral Active Wideband

Receiver Amplifier for scanning

 MIL-STD-810F (Temperature,

Immersion, Vibration, Dust)

 Designed to MIL-STD-461

12-20232-EN Issue 5 4/2014

3040 AUTOMATIC WHIP ANTENNA

The 3040 Automatic Whip Antenna is a low profi le, high

performance alternative to the highly successful 9350,

providing a mobile antenna solution for all families of

Codan high frequency radios.

The combination of lightning fast tuning, compact form

factor, and rugged construction all contribute to provide

a state of the art mobile antenna tuner product.

HIGH PERFORMANCE

With a 125 W RF power handling capability, the 3040 can be used for

voice and data operation over the full 2 to 30 MHz frequency band.

The tuner has tune from memory time of less than 200 mS with

unlimited memory capacity, and new frequencies are typically tuned

in less than one second.

The extremely fast tuning capability and optimised antenna

effi ciency ensures maximum system readiness is always available

to the operator.

www.codanradio.com

CODAN RADIO COMMUNICATIONS

Australia: +61 8 8305 0528

Canada: +1 250 382 8268

 US: +1 585 419 9970

 Dubai: +971 44 53 72 01

 UK: +44 1252 717 272

 sales@codanradio.com

3040 AUTOMATIC WHIP ANTENNA

12-20232-EN Issue 5 4/2014

Values noted are typical. Equipment descriptions and specifi cations subject to change without notice or obligation.

CODAN™ and NGT™ are trademarks of Codan Limited.

Other brand, product and company names mentioned

in this document are trademarks or registered

trademarks of their respective holders.

SPECIFICATIONS

GENERAL

Frequency range 2.5 to 30 MHz (2.4 m, 7.9 ft Whip)

2 to 12 MHz (3.5 m, 11.5 ft NVIS)

Power rating 125 W PEP (voice and data)

Power consumption 0.4 A typical, less than 0.8 A typical while tuning

Input impedance 50 Ω

VSWR Typically ≤1.5:1

Tuning speed New frequency 1 sec average, memory tune <150 ms

Memory channels Unlimited

MECHANICAL

Temperature rating –30°C (–22°F) to 60°C (140°F), 95% humidity

DC operating range 11 to 15.5 V DC (12 V DC nominal)

Protection Open circuit, short circuit, over voltage, over temperature,

voltage transients, high VSWR

MIL-STD 810F Temperature, Immersion, Dust, Vibration

MIL-STD-461 Designed to standard

Dimensions 147 mm W x 167 mm D x 240 mm H; 5.8” x 6.6” x 9.4”

(excludes spring and whip)

Weight 3.15 kg (6.9 lbs) including spring and whip

Mounting M14 stud, 40 mm (1.6”) long

Colour Black

Values noted are typical. Equipment descriptions and specifi cations subject to change without notice or obligation.

ACCESSORIES

3040 to NGT™ Control Cable, 6 m (19.7 ft)

3040 to NGT™ Coaxial Cable, 6 m (19.7 ft), UHF to UHF

3040 NVIS Antenna Kit

RUGGED DESIGN

The 3040 is built to withstand the severe conditions that

are often experienced in mobile high frequency radio

deployments. The internal electronics are protected by

a lightweight composite shroud and vibration absorbing

mount to provide a product that is fully waterproof and

compliant to MIL-STD-810F for temperature, immersion,

vibration and dust ingress.

TRANSCEIVER INTEGRATION

The control interface of the 3040 is fully integrated with

CODAN™ HF transceivers so that tuning is transparent to

the operator. The 3040 is designed for full compatibility with

all modes of operation, including receiver scanning, and ALE

(Automatic Link Establishment) and data.

3040 NVIS Antenna Kit



3040 NVIS Antenna Kit

3040 NVIS Antenna Kit