Code Alarm Automobile 1000 Users Manual

1000SX to the manual b5b481a2-6f40-4405-9d12-1715abd761c6

2015-02-02

: Code-Alarm Code-Alarm-Code-Alarm-Automobile-Alarm-1000-Users-Manual-422259 code-alarm-code-alarm-automobile-alarm-1000-users-manual-422259 code-alarm pdf

Open the PDF directly: View PDF PDF.
Page Count: 9

Scroll down to view the document on your mobile browser.
C:OOc~7wIlA ~rn nClBClClY ELSE IS Wi=' TCl CClClE OWNER'S MANUAL· PROFESSIONAL SERIES 1000 1000SX 3000 ELITE SERIES DM 1500
, Turn the ignition key off and exit the vehicle. Press the arming button (refer to multi-car operation to determine button function) on the remote control transmitter. The siren will emit 2 short arm "chirps" to indicate that the system is fully armed. A single shOrt "chirp" in-Idic:at,.sthat one of the protected entry points has been·)eft open. The siren will emit the 2nd arm "chirp" 1 second after the entry point is closed. U,&!m;;H'IJl.u!~A!&r!!'l!l~z;' Turn off the ignition key and exit the vehicle. 1 minute after exiting the vehicle the siren will emit 2 short arm "chirps" to indicate that the system is fully armed. A single short 'chirp" indicates that one of the protected entry paints has been left open. The siren will emitthe 2nd arm "chirp' 1 second after the entry paint is closed. " DISARMING THE SYSTEM ~With the system armed, press the disarm button on the remote control transmitter. The siren will emit one long "chirp" (about twice the duration of the arm "chirps") to indicate that the system is fully disarmed. The dash mount status light will turn off. The Jvehicle can now be started normally. l!IEMERGENCY OVERRIDE BUTTON: In the event of a lost transmitter, enter the vehicle, turn on the ignition switch, then press the hidden disarm button to disarm the vehicle. , Automatic arming systems will auto-matically re-arm 1 minute after disarm. The ignition or valet override switch must be turned on within 1 minute to prevent auto-matic re-arm. ARM/ nr::::l DISARMUL:J

Navigation menu