Code Alarm Automobile 1000 Users Manual
1000SX to the manual b5b481a2-6f40-4405-9d12-1715abd761c6
2015-02-02
: Code-Alarm Code-Alarm-Code-Alarm-Automobile-Alarm-1000-Users-Manual-422259 code-alarm-code-alarm-automobile-alarm-1000-users-manual-422259 code-alarm pdf
Open the PDF directly: View PDF .
Page Count: 9
![](asset-1.png)
C:OOc~7wIlA
~rn
nClBClClY
ELSE
IS
Wi='
TCl
CClClE
OWNER'S MANUAL·
PROFESSIONAL SERIES
1000
1000SX
3000
ELITE SERIES
DM
1500
![](asset-2.png)
,
Turn
the ignition key
off
and
exit the vehicle.
Press
the arming button (refer
to
multi-
car
operation
to
determine
button
function) on the remote control transmitter.
The
siren
will emit 2 short arm
"chirps"
to
indicate
that
the system
is
fully armed. A single
shOrt
"chirp" in-
Idic:at,.sthat one
of
the
protected
entry points has been·)eft open.
The
siren
will emit the 2nd arm "chirp" 1 second after the entry point
is
closed.
U,&!m;;H'IJl.u!~A!&r!!'l!l~z;'
Turn
off
the ignition key
and
exit the vehicle.
1 minute after exiting the vehicle
the
siren
will emit 2 short arm "chirps"
to
indicate
that
the system
is
fully armed. A single short 'chirp" indicates
that
one
of
the
protected
entry paints has been left open.
The
siren will
emitthe
2nd arm "chirp' 1 second after the entry paint
is
closed. "
DISARMING
THE
SYSTEM
~With
the system armed,
press
the
disarm
button on the remote control transmitter.
The
siren
will emit one long "chirp"
(about
twice
the duration
of
the arm "chirps")
to
indicate
that
the system
is
fully disarmed.
The
dash mount status light will turn off.
The
Jvehicle
can
now
be
started normally.
l!IEMERGENCY
OVERRIDE
BUTTON:
In
the event
of
a lost transmitter, enter the
vehicle, turn on the ignition switch, then
press
the
hidden
disarm
button
to
disarm the
vehicle.
,
Automatic
arming
systems
will auto-
matically re-arm 1 minute after disarm.
The
ignition or valet override switch must
be
turned on within 1 minute to prevent auto-
matic
re-arm.
ARM/
nr::::l
DISARMUL:J
![](asset-3.png)
,
o
The
valet function allows you
to
prevent
the system from arming when
vehicle
is
being serviced or parked by a valet.
To
operate. simply
disarm
the
system then turn
the
valet switch
to
the
"ON·"
position before
arming
the
system.
The
system will remain
in
the
valet state
as
long
as
the
valet switch remains
in
the
"ON"
position.
The
system will arm
normally when the
valet
switch
is
returned
to
the
"Q!!"
position.
the
alarm
is
in
the
valet state.
the
L.E.D.
indicator will flash
in
a
blink sequence (2-blinks
"on";
then "off"
...
).
In
valet state your remote
control transmitter
will
still
lock
and
unlock your doors
but
will
not
arm
your vehicle. It
\/iiill
only emit one chirp
as
if
an
entry point was left open.
Some states
do
not
allow a premium insurance discount for alarm
equipped
vehicles when
the
service/valet override switch
is
used.
Check
with
REMOTE
CONTROL
PANIC
BUTTON
OPERATION
f!
With the system
armed
or
disarmed.
press
both
buttons on the remote
control transmitter at the same time.
The
siren
will turn
on
and
remain
active for 30 seconds.
The
siren
can
be
turned
off
before 30 seconds
by
pressing
any
button
on
the remote control transmitter.
Your system
is
capable
of
recognizing 4 different transmit-
ters having 4 different codes.
o
TWO-CAR
OPERATION:
In
this
mode
each
transmitter
can
control
two
cars.
Both
cars
must
have
alarms
with
2 car capability.
ARMI
~
ARMI
DISARM . DISARM
CAR
1
CAR
2
PRESS AND HOLD
DISARM BUTTON
FOR TRUNK
![](asset-4.png)
,
-Fast blink: Tripped
-Double blink:
In
valet
-Slow blink:
Armed
-Off: Disarmed
I!{UTE-
TOUCH
SHOCK
SENSOR:
Provides your
vehicle
with customc
ized sensitivity
to
detect
sharp blows
tothe
doors.
hood.
trunk
and
windows
yet
ignore
such sounds as wind. rain. horns
or
passing traffic
..
Non-threat-
ening
light blows will
not
set
off
your alarm.
but
will
trigger
a
warning
"chirp".
The Lite Touch Shock Sensor will trigger
the
alarm
if a
harder
blow
impacts
the
vehicle.(Lite-Touch
is
not
availible
on
Pro.
1000
and
the
Elite DM 1 500)
![](asset-5.png)
,
-.
,.
IB:If...u;~~lE!~~~ttt
When you disarm your system,
the
siren
will
emit a
series
of"
Chirps",
if
the
alarm was
tripped
in
your absence.
To
identify
what
tripped your system push
the
emergency override
button
before
turning the ignition on.
1
CHIRP
-Shock
Sensor
was tripped.
2
CHIRPS
-Ignition has
been
turned
"ON".
3
CHIRPS
-Door
Sensor
was triggered (Ford vehicles only)
4
CHIRPS
-Door
Sensor
was triggered
(G.
M"
Chrysler. Import vehicles) or
Hood/Trunk was triggered.
SCAN
PETERRENT:
This
alarm
is
designed
to
prevent any
attempt
by
a thief
to
disarm your system
by
electronically scanning your per-
sonal transmitter
code.
COPE
LEARNING:
Dealer
can
program system
on
the
spot
to
learn
up
to
four
new
transmitter codes should origircal transmitter
be
lost or
stolen. Since
new
codes
do
not
have
to
be
specially ordered, your
vehicle will
not
go
unprotected.
AUTOMATIC
REARM
AFTER
TRIP
CYCLE:
If
alarm
is
tripped,
siren
sounds for
60
seconds, then
siren
stops
and
system rearms itself. If a thief
returns
to
try again, he returns
to
an
armed
vehicle.'
CONTINUOUS
OPEN
POOR
MONITOR:
If
a
potential
thief
attempts a break-in
and
leaves
the
vehicle
door
ajar,
alarm
sounds for
one
minute, then turns off.
This
cycle
is
repeated
five times
to
draw'extra
attention
to
the
vehicle while keeping the vehicle
armed
and
al'ert.
![](asset-6.png)
,
AUTOMATIC
POWER
OOORLOCK:
When selected,
the
system will automatically lock
the
vehicle doors when
the
alarm
completes
the
automatic
arming cycle.
NOTE:
Selecting this function will lock
the
doors even if
the
keys
are
accidently
left
in
the
ignition
or
In
the
vehicle.
Interior lights automatically turn
on
when you turn
the
ignition key
off
for vehicle exit
and
when you disarm
the
system for vehicle entry. Provides lighted
exit.
and
entry for increased
nighttime security.
Press
the
arm/disarm buttor\'
on
your transmitter
to
disarm
the
system (long disarm "chirp"),
The
interior lights will illuminate for
1 minute or until ignition key
is
turned on.
Flashes
parking lights when
the
alarm
is
tripped for increased attention.
Also
flashes parking lights,along with (or
instead of) arm/disarm "chirps".
CHECK
The
system should
be
tested periodically for proper operation, Arm
the
system,
wait
at
least 5seconds
after
you hear
the
second arm "chirp",
then'
test all
protected
entry
pOints.
When entry point
is
violated,
the
siren will
sound for
60
seconds followed
by
a
10
second off time.
This
cycle
will
repeat
as
long
as
an
entry
point
is
being violated. Consult your
dealer
for
sensor operation.
If
you
encounter
a problem, consult your dealer,
![](asset-7.png)
,
"
, '
SYSTEM
MAINTENANCE/SERVICE
The
system requires
no
specific maintenance, YourCode-Alarmdealeris fully
qualified to properly seNice all
system
components should a problem
arise.
The
life
expectancy
of
the transmitter battery
is
approximately 1 year
may
be
longer depending on actual
use.
Decreasing transmitter range i
an indication
of
a weakening battery.
To
access the transmitter battery;
1
.
Use
a small phillips
head
screwdriver
to
remove the case screVf on the
back
of
the transmitter.
2.
Remove the
back
cover
to
access the battery.
3,
Carefully remove the battery
and
replace
It
with a
12V
cigarette lighter
battery (Duracell-Type MN21, Gold Peak-Type GP23A or order from your
dealer). Make
sure
the battery's (-) &
(+)
sides
are
placed
into transmitter
properly.
During ideal conditions your
CODE
ALARM
security system
is
designed
to
operate
via remote control
at
a range
of
approximately
50
feet from your
vehicle. Although you
may
at
times experience range greater than
50
feet,
are certain conditions
that
will cause the transmitter range
to
be
less
what
you would normally experience, Atmospheric conditions
and
radio interference are just a
few
examples
of
the types
of
interference
that
can
reduce transmitter range,
If
you experience conditions which will
not
allow your transmitter
to
disarm your vehicie, then
use
your emergency
override button inside the vehicle.
This
will disarm
the
system
and
allow you
start your vehicle. Move your vehicie to a different location,
If
problem
occurring,
check
your transmitter battery or see your dealer,
![](asset-8.png)
,
:',
When a CODE-ALARM Professional or Elite Series system has been installed in
your vehicle, CODE-Al,ARM will pay you the following amounts
if
your
vehicle
should be stolen within the first year following the system's installation.
PROFESSIONAL ELITE
1000 -$500.00 DM1500 -$1000.00
$1000.00 .
$2000.00
OOOSX
-$1000.00
$1000.00
$2000.00
$2000.00
2000 -
4000 -
6000 -
COMPETITION -$3000.00
$3000.00
In
order to qualify for this theft protection guarantee, the following restrictions
apply:
. The vehicle's owner as well as the dealer/installer must complete and
submit to CODE-ALARM the Theft Protection Guarantee Registration
Form within thirty (30) days from purchase to verify that the system was
installed.
The system must be installed by
an
authorized CODE ALARM Dealer.
The vehicle in which the system has been installed must be not more
than three (3) years old from the date of original purchase of the vehicle.
The vehicle
in
which the system has been installed must be missing for
thirty (30) days
or
more.
A copy
of
the police report of the missing veflicle and a copy of the paid
theft insurance claim
on
that same vehicle, arid a copy of original receipt
of purchase must be submitted to CODE-ALARM. The original owner
as used herein shall mean the owner of the vehicle at the time of the
original registration with the CODE-ALARM.
When all the above qualifications have been met, a reimbursement check will be
out to the vehicle's owner and to the installing dealer.
URANCE REGISTRATION FOR DISCOUNT PROG
In
some states your insurance company may offer you a 5-20% discount for
installing a CODE-ALARM, INC. Alarm System. Check with your insurance
for details. This form may serve as proof of installation.
:
":::======:a~;mc;;;;r;;:--:illE
installed a CODE-ALARM System in my
1_
The CODE-ALARM System was installed
on
1~~~~amcebY~~------------
:~
policy #
---;-:-;---;-~--;-
_____
_
'1I<,hirIA Year
-=cc--
Make Model
_______
__
IIIAt,idA ID# (VIN)
_________
-:-::-:-==-
___________
_
![](asset-9.png)
"
,
Products manufactured by CODE-ALARM are warranted
by
the company to the
original consumer purchaser to be free from defects in workmanship and
material. Should a product be found defective without charge during the lifetime
of the vehicle in which it was originally installed, CODE-ALARM shall repair or
replace the product
or
any part of the product which CODE-ALARM agrees is
defective without charge during the first year provided the product is returned to
CODE-ALARM freight prepaid and accompanied by a copy of the purchase
receipt. After one year a ten dollar charge will be required to cover "hinninn
'"ni
handling after service,
The warranty described
in
the paragraph above shall apply to products manufac-
tured and sold by CODE-ALARM. Products sold by, but not manufacturep by
CODE-ALARM are warranted by CODE-ALARM for a period of one year from the
date of purchase by the original consumer and purchaser.
This warranty does not apply to any product damaged by accident, physical
or
electrical misuse
or
abuse, improper installation, alteration, any use contrary to
its intended function, unauthorized service (i.e. service by anyone other than the
Company
or
its authorized service personnel), fire, flood, lightning, or other acts
of God.
The Company shall not be responsible for removal andlor reinSlallation charges,
damage to or theft of the vehicle or its contents, or any incidental or consequen-
tial damages caused by any failure
of
the product to function properly. Under no
circumstances should this warranty, or the product covered by
it,
be construed as
an insurance policy against loss. The Company neither assumes nor authorizes
any person or organization to make ANY WARRANTIES or assume any liability
in
connection with the sale, installation, or use of this product. This is the
,nn1nI"tA CODE-ALARM warranty and no other warranty exists.
o
Automatic
o
Manual
o
Remote
o
Starter
Interrupt
Owner
Signature:
___________
_