Cogent Systems RFREADER RF-READER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	868844
Application ID	7hAQvxWkf7IPKOZVMdA91Q==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.54kB (169299 bits)
Date Submitted	2007-11-15 00:00:00
Date Available	2007-11-28 00:00:00
Creation Date	2007-11-06 09:49:03
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-11-06 14:36:58
Document Title	Microsoft Word - user manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	maggie

Cogent systems
RF-READER USER MANUAL
RF-READER 安装及测试方法
RFREADER USER MANUAL
准备：读卡器、非接触卡（Desfire、Mifare）、驱动、Demo(CLR2007.exe)
Preparations: RF-READER, contact less card(Desfire、Mifare), driver, Demo(CLR2007.exe)
z 驱动安装：
Driver installation:
一、设备接入计算机，提示驱动安装，选择“否，暂时不”继续“下一步（N）”如下图：
Connect the RF-READER to PC. While the message box suggesting you to install the driver,
choose “N, temporarily” and then choose “next” as picture below:
（DRIVERINSTALL_1）
二、选择“从列表或指定位置安装（高级）”，选择“下一步（N）”，如下图：
Choose the item “select from list or specified path (senior).Then press “next (N)”. See the picture.
-1-
Cogent systems
RF-READER USER MANUAL
（DRIVERINSTALL_2）
三、浏览到驱动文件所放文件夹，确定，选择“下一步（N）”如下图，
Browse the driver’s documents, press “Y” and choose “next (N)” as the following picure:
（DRIVERINSTALL_3）
四、开始安装驱动程序，如下图：
Start to install the driver. See the picture below:
-2-
Cogent systems
RF-READER USER MANUAL
（DRIVERINSTALL_4）
五、驱动安装完成，选择“完成”，如下图，
When the installation is completed, choose “done”.
（DRIVERINSTALL_5）
六、确认驱动安装，在桌面“我的电脑”右键选择“管理”，打开“计算机管理”，选择“设
备管理器”，看是否驱动已经正确安装，如下图，为驱动已经安装正确：
Confirm if the driver has been installed well. Press “my computer” by right key and choose
-3-
Cogent systems
RF-READER USER MANUAL
“manage”. After open the “computer management”, select “device controller” to check if the
driver has been installed well. Look at the picture below, it suggests that the driver has been
installed well.
z 使用方法：
Operation manual:
一、打开 Demo 程序“CLR2007.exe”，如下图：
Open the Demo program “CLR2007.exe”, see the picture below:
-4-
Cogent systems
RF-READER USER MANUAL
（DEMO）
二、将卡移至读卡区，选择“Read”提示“OK”，读卡成功，如下图：
Put the card upon the reading area. Then choose “read”, while massage box suggests that it is well
done. The reading procedure is completed.
(READ）
二、将卡移至读卡区，选择“write”提示“OK”，写卡成功，如下图：
Put the card upon the reading area. Then choose “write”, while massage box suggests that it is
well done. The writing procedure is completed.
-5-
Cogent systems
RF-READER USER MANUAL
(WRITE)
-6-
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. The antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
The installer of this radio equipment must ensure that the antenna is located or pointed
such
that it does not emit RF field in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Heath Canada’s website
www.hc-sc.gc.ca/rpb.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:11:06 14:36:58+08:00
Create Date                     : 2007:11:06 09:49:03+08:00
Metadata Date                   : 2007:11:06 14:36:58+08:00
Format                          : application/pdf
Title                           : Microsoft Word - user manual.doc
Creator                         : maggie
Document ID                     : uuid:7a181a02-2919-474f-b4fe-daa5b875b64b
Instance ID                     : uuid:6045de73-b52e-41a0-84a3-7bf99cecdd3a
Page Count                      : 7
Author                          : maggie

EXIF Metadata provided by EXIF.tools