Collis SMARTWAVEBOX Inductive Proximity Card Reader User Manual SmartWave user manual CE FCC 1 0

Collis B.V. Inductive Proximity Card Reader SmartWave user manual CE FCC 1 0

Contents

User manual part 1

SmartWave Box User Manual Status: Final draft i Version: 1.0 Version 1.0 Date 07-07-2009 Status Final draft Document data Project Owner Project Manager Project Code COLLIS_2006_133 (SmartWave Box) Document Title SmartWave Box. User Manual File Name SmartWave_user_manual_CE_FCC_1.0.doc Archive Name Key Words SmartWave Box User Manual
SmartWave Box User Manual Status: Final draft ii Version: 1.0 TABLE OF CONTENTS 1 Introduction ........................................................................................................................ 1 1.1 Scope of document ............................................................................................................. 1 1.2 Intended audience .............................................................................................................. 1 1.3 Terminology ....................................................................................................................... 1 2 Product Description ........................................................................................................... 2 2.1 Shipping group ................................................................................................................... 2 3 System Requirement .......................................................................................................... 3 3.1 Hardware requirements ...................................................................................................... 3 3.2 Software requirements ....................................................................................................... 3 4 Installation.......................................................................................................................... 4 5 Functional Description ....................................................................................................... 5 5.1 Housing .............................................................................................................................. 5 5.2 LEDs .................................................................................................................................. 5 5.3 Connectors ......................................................................................................................... 5 5.4 Terminal / Card side ........................................................................................................... 6 5.5 Modes of operation ............................................................................................................ 6 5.5.1 Analyzer mode ...................................................................................................... 6 5.5.2 Interceptor mode ................................................................................................... 7 5.5.3 Card reader mode .................................................................................................. 7 5.5.4 Card emulator mode .............................................................................................. 7 5.5.5 Passive spy mode .................................................................................................. 8 6 Communicating with the SmartWave Box ........................................................................ 9 6.1 Host interface protocol ....................................................................................................... 9 6.2 Tag types .......................................................................................................................... 10 7 Appendix .......................................................................................................................... 12 7.1 Technical Information ...................................................................................................... 12 7.2 CE/FCC Statement ........................................................................................................... 12 8 Support ............................................................................................................................. 13 References .................................................................................................................................. 14
SmartWave Box User Manual Status: Final draft 1/12 Version: 1.0 1 INTRODUCTION The SmartWave Box, a hardware device, is the perfect solution for testing contactless cards. It can read and simulate contactless smart cards; and also can analyze or spy the communication between a contactless card and terminal. With its various modes of operation, the SmartWave Box is the most versatile tool available today for contactless testing. 1.1 Scope of document This the user manual describes how to setup and use the SmartWave Box. 1.2 Intended audience This document is intended for the user of the SmartWave Box. Audiences are assumed to have a fair understanding of the standards related to smart cards and CL cards and related tests. 1.3 Terminology To avoid confusion the term ‘internal terminal’ is used to refer to the internal active antenna of the terminal side of the SmartWave Box, the internal terminal communicates with the Card-under-test (CUT). The external passive antenna is referred as the ‘(CL) probe’ and communicates with the Terminal-under-test (TUT).
SmartWave Box User Manual Status: Final draft 2/12 Version: 1.0 2 PRODUCT DESCRIPTION 2.1 Shipping group SmartWave Box One (1) unit SmartWave Probe One (1) unit Firewire cable One (1) unit USB cable One (1) unit AC/DC power adapter One (1) unit Suckers Two (2) units
SmartWave Box User Manual Status: Final draft 3/12 Version: 1.0 3 SYSTEM REQUIREMENT 3.1 Hardware requirements  A free USB port in your PC, support up to USB v2.0.  No special requirement for memory size, please check the software application user manual for corresponding information. 3.2 Software requirements  Collis test tools may need to be installed in order to use the full functionality of the SmartWave Box. Please contact Collis for software applications information.
SmartWave Box User Manual Status: Final draft 4/12 Version: 1.0 4 INSTALLATION Please use the installation procedure below to setup the SmartWave Box:  STEP1 Carefully unpack the contents of the shipping group.  STEP2 Use Fireware cable to connect the SmartWave box with the SmartWave probe.  STEP3 Connect the SmartWave Box to PC with provided USB cable.  STEP4 Connect power adapter to the SmartWave Box. Now the box is powered up. The power LED on the box will be turned on. And a beep sound will be generated by the box after initialization.  STEP5 Install the driver for the SmartWave box by following the driver installation wizard on your system. Note: The SmartWave Box driver will be installed automatically when installing related Collis Test Tools. Then the SmartWave box is ready to use, you may need to install other software from Collis to work together with the SmartWave box. Please check the application user manual for further information.
SmartWave Box User Manual Status: Final draft 5/12 Version: 1.0 5 FUNCTIONAL DESCRIPTION 5.1 Housing The SmartWave Box has about the same size as the SmartLink Box. The antenna of the internal terminal is placed underneath the top cover and its position is clearly marked. On the back of the SmartWave Box a power connector, a USB connector and the CL probe connector are placed. On the front of the box are LEDs which shows CL card, terminal status and communication. The front also carries test connectors to view information on an oscilloscope. Fig. 1 The SmartWave Box 5.2 LEDs The SmartWave Box has the following LEDs: Power Red LED Intern Tx/Rx Tri-color LED, green = Data Rx, red = Data Tx Probe Tx/Rx Tri-color LED, green = Data Rx, red = Data Tx Internal terminal RF Tri-color LED, green = RF only, amber = RF and modulation CL probe RF Tri-color LED, green = RF only, amber = RF and modulation The communication signaling of the tri-color LEDs is stretched, i.e. short frames are show as being longer. 5.3 Connectors The SmartWave Box is fitted with the following coaxial connectors for connection with an oscilloscope: Internal terminal RF Buffered antenna RF signal of the internal terminal Internal raw data (Rx) Raw Rx data Internal Tx data Transmit data External terminal RF Buffered antenna RF signal of the internal terminal External raw data (Rx) Raw Rx data

Navigation menu