Comarch CB001 COMARCH beacon CB001 User Manual Comarch Beacon User Manual 1 0 EN DRAFT

Download:
Mirror Download [FCC.gov]
Document ID	2714409
Application ID	gdir35NWGnrNjELuSkD8xA==
Document Description	Comarch_Beacon_User_Manual_1.0_EN_DRAFT
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.89kB (198597 bits)
Date Submitted	2015-08-13 00:00:00
Date Available	2015-08-14 00:00:00
Creation Date	2015-06-25 17:03:56
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2015-06-25 17:03:56
Document Title	Comarch_Beacon_User_Manual_1.0_EN_DRAFT
Document Creator	Adobe InDesign CC 2014 (Windows)

User manual
Warranty
11
User manual
1. General information:
a. Product name: Comarch beacon
b. Model: CB001
c. Product web page: www.beacon.comarch.com
d. Manufacturer:
Comarch SA
al. Jana Pawla II 39A, 31-864 Krakow, Poland
e. Licensor:
Comarch Technologies Sp. z o.o.
al. Jana Pawla II 39A, 31-864 Krakow, Poland
f. Copyright © 2015 Comarch Technologies Sp. z o.o.
g. The device is not a dual-use item.
h. Patent pending
2. Notes:
a. Package content:
I. Comarch beacon device, 1 or 3 pcs.
II. User manual
III. Tape mounting pads Micro-suction , 1 or 3 pcs. (optional)
ATTENTION: Electronic version of technical specification
and additional documents regarding Comarch beacon device
can be downloaded from web page:
www.beacon.comarch.com/ON
WARNING: The package and its content is not a toy
and can not be made available to children.
Keep it out of children.
COMARCH beacon
User manual
3. Instruction icons
b. Product incorporates:
I.
WARNING – situations that could cause user’s
injury.
CAUTION – situations that could cause damage
of the device.
ATTENTION – tips and additional information.
Proprietary technology developed
by Comarch Technologies.
II. Strict standards to ensure high quality
of mobile communication.
III. Security module eliminating threat of signal
eavesdropping or impersonation.
IV. The possibility of wireless
software updates.
V. Solutions for collaboration with a wide
range of Comarch products.
VI. Lithium battery.
VII. Temperature and accelerometer sensors.
COMARCH beacon
4. Copyright
Copyright © 2015 Comarch Technologies Sp. z o. o.
This manual is protected under international
copyright law. No part of the manual may be
reproduced, distributed, or transmitted in any
form or by any means without written permission
of the Comarch Technologies Sp. z o. o.
5. Trademarks
a. Comarch is registered trademark of Comarch SA.
b. Comarch beacon and Comarch beacon logo are registered
trademarks of Comarch Technologies Sp. z o. o.
c. Comarch Technologies and Comarch Technologies logo
are registered trademarks of Comarch Technologies Sp. z o. o.
d. Bluetooth®, Bluetooth® logo and Bluetooth Smart® are
registered trademarks of Bluetooth SIG, Inc.
e. Wi-Fi® and Wi-Fi® logo are registered trademarks of
Wi-Fi Alliance.
f. iBeacon® and iBeacon® logo are registered trademarks
of Apple, Inc., registered in U.S.
g. Android, Google , Google Play , Android logo, Google,
Google Play are registered trademarks of Google, Inc.
h. All other trademarks and copyrights are the property
of their respective owners.
User manual
Mounting using screws
1. Case bottom part
2. Screw type A
3. Battery
4. Electronic
3. Screw type B
4. Case top part
6. Introduction
a. Dimensions: equilateral triangle with a 5 cm long side
with cut-off tops, height 1.4 cm
b. Weight: 20g
c. Mounting types
Recomended types of mounting: UVA tape, Micro-Suction
tape pads or screws (accessories are optional).
CAUTION: Be cautious when opening beacon casing.
Electronics is shock sensitive.
ATTENTION: For holes drilling use a drill of
appropriate type and thickness. Recommended screws:
1. Screw A: length 30mm, thread diameter: 3.5mm,
head diameter: 7mm, head type: conical.
2. Screw B: length 30mm, thread diameter: 3.5mm,
head diameter: 7mm, head type: cylindrical.
ATTENTION: Do not overtighten the screws since it may
cause the plastic casing cracking.
Mounting using Micro-Suction tap
7. First time usage
a. If the device is turned off (see description on the package):
I. Open the beacon caseing.
WARNING: Do not open casing using your fingers, since
this could injure your nails.
II. Remove the battery isolator film.
III. Close the beacon casing.
Beacon is active now.
b. If the device is turned on (see description on the package),
beacon is already active.
COMARCH beacon
User manual
IV. Insert the electronics into casing and close beacon cover.
8. Compatible smartphone OS
a. Android version 4.3 (API level 18) and up
b. Apple iOS version 7 and up
10. Regulations
a. CE
This product meets the requirements specified by
the following standards:
- R&TTE 99/CE/05 (ETSI EN 300 328 V1.8.1)
- ETSI EN 301 489-1 V1.9.2
- ETSI EN 301 489-17 V2.2.1 (2012-09)
- EN 60950-1:2006+A11:2009+A1:2010+A12:2011
A2:2013
ATTENTION: Devices with Bluetooth 4.0
working on iOS and Android can work
with Comarch beacon.
9. Maintenance
a. Battery replacement
I. Open the beacon casing.
WARNING: Do not open casing using your fingers,
since this could injure your nails.
CAUTION: Be cautionus when opening casing.
Electronics is shock sensitive.
II. Carefully remove the electronics and battery.
III. Put a new battery in place.
ATTENTION: Do not dispose the battery with the household
waiste. Dispose the battery in accordance with section 10 b.
CAUTION: Be careful when inserting the battery!
Make sure the battery contacts are clean. Sometimes,
even an invisible film from your oily finger tips, may
prevent proper contact.
Never hold any cells in the center but at the sides only.
You may use either a clean cloth to clean off a light layer of
oxidation or a pencil eraser to remove heavier deposits from
the cells polarity surfaces.
Make sure you also clean the contact points (battery clip wires)
on the beacon. It is recommended to use cotton gloves for
battery installation.
COMARCH beacon
b. Disposal of waste electrical and electronic
equipment (for the countries which apply the waste
segregation system).
At the end of use, this product can not be disposed
with the household waste. For more information,
please contact the local community waste collection
point or contact the dealer or supplier.
c. RoHS
This product meets the requirements of the directive:
Restriction of Hazardous Substances (2002/95/EC).
11. Technical specification
a. Battery
Lithium battery CR2477 3V (nominally),
Manufacturer: Renata,
Capacity: 950mAh.
Battery is replacable.
b. Radio specification
- Bluetooth 4.1 Low Energy
- device class 1
- range up to 100m (open space)
- maximum transmitter power: 8 dBm
(default setting: -1.3 dBm)
User manual
Warranty
- receiver sensitivity: -92.5 dBm
- frequency range: 2.4 GHz to 2.4835 GHz
- peak antenna gain: 0.5 dBi
- average antenna gain: -0.5 dBi
c. Recommended operating conditions
Operating condition
Minimum
Maximum
Unit
Temperature
85
°C
Humidity
20
90
Battery voltage
1.8
3.6
The manufacturer gives the buyer of Comarch beacon device
a warranty that device is free from defects in workmanship and
material, while not guarantee uninterrupted and free from any fault
working of the beacon device. The warranty is granted for a period
of 12 months from the date of purchase of the device from the
manufacturer or an authorized distributor. The warranty is given
one time and cannot be extended.
Warranty does not cover devices which:
a) have been modified or altered, or
d. Absolute maximum ratings
Rating
Storage
temperature
Battery voltage
b) have not been used or stored in accordance
with user manual, or
Minimum
Maximum
Unit
-40
85
°C
3.6
c) have not been used in accordance with the law, or
d) shows signs other than those arising from daily use.
Using the beacon may also be subject to restrictions
under the provisions of the law.
12. Disclaimer
a. The manufacturer is not liable for any damage
resulting from the incorrect use of the device,
contrary to its intended purpose or the information
contained in the user manual.
b. The manufacturer is not responsible for products
provided by third parties and delivers them in the form
of as-is and does not explicitly guarantee that they will be
useable.
To the extent permitted by the law applicable to the area where
the beacon device was obtained from authorized distributor
or manufacturer:
a) above guarantee is only valid warranty
and in lieu of all other express or implied,
warranties or conditions of satisfactory quality,
merchantability and usefullness for a particular purpose,
b) manufacturer is not responsible under the warranty
for physical and legal defects,
c) manufacturer liability does not cover liability
for loss of data,
10
COMARCH beacon
User manual
11
d) manufacturer liability for any damages during usage
of the beacon device is limited to the damage
caused due to intentional fault,
Federal Communications Commission (FCC)
e) the amount of compensation is limited only to
actual losses and does not include lost profits
or benefits.
FCC PART 15 STATEMENTS FOR USER’S MANUAL
If the buyer is a consumer, the above provisions
do not exclude or restrict liability warranty, except
in cases where such exclusion or limitation is
permitted under the provisions of applicable law..
Document version
User manual: version 1.0
Statement (USA)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
www.beacon.comarch.com
www.technologies.comarch.com
User manual
13
This device meets the FCC and IC requirements for RF exposure
in public or uncontrolled environments.
Canada: Industry Canada (IC) Statement
IC Notice to Users English/French in accordance with RSS GEN
Issue 3:
This device complies with Industry Canada license exempt RSS
standard(s).
Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard
exempts de licence (s). Son utilisation est soumise à Les deux
conditions suivantes:
PRELIMINARY
1. cet appareil ne peut pas provoquer d’interférences et
2. cet appareil doit accepter Toute interférence, y compris les
interférences qui peuvent causer un mauvais fonctionnement
du dispositive
This Class B digital apparatus complies with Canadian ICES-003
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
14
COMARCH beacon

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12
Create Date                     : 2015:06:25 17:03:56+02:00
Metadata Date                   : 2015:06:25 17:03:56+02:00
Modify Date                     : 2015:06:25 17:03:56+02:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Instance ID                     : uuid:0581b02d-9b1f-44e5-9a67-a1bb7f4b4e35
Original Document ID            : xmp.did:c6bf7486-7433-404a-b711-91ce051b6802
Document ID                     : xmp.id:e51e7ad1-aeb0-b144-86d6-9183c00d879c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:51264395-707b-ec4b-bd0e-d8368f927428
Derived From Document ID        : xmp.did:d04c3c8c-7ddf-3c43-95a5-4f8e8a779b36
Derived From Original Document ID: xmp.did:c6bf7486-7433-404a-b711-91ce051b6802
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2015:06:25 17:03:56+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 8
Creator                         : Adobe InDesign CC 2014 (Windows)

EXIF Metadata provided by EXIF.tools