Comigo COMIGOBOX1 IP Set Top Box User Manual Comigo data sheet V1 b 20121111
Comigo Ltd. IP Set Top Box Comigo data sheet V1 b 20121111
Comigo >
User manual
Datasheet Comigo’s comprehensive, feature rich, most advanced Smart TV platform considerably enhances the TV experience by uniquely extending viewing across all types of handheld devices, thereby opening up revolutionary personalization and interactive socialization capabilities. The Comigo Box version 1.b is an Android based platform designed to turn any TV into a Smart and Social TV. The smart Set-Top-Box (STB) can stream video and audio content from IPTV channels, OTT video distribution, VOD stores, external USB hard drives and content stored on a home network. The STB can be operated with a simple remote control or via a Smartphone or Tablet using iOS and Android applications. HARDWARE CONNECTIVITY CPU: ARM Cortex A9 @ 800MHz LAN: RJ-45 with 10/100Base-T connection DRAM: 512MByte DDR2 WLAN: 802.11b/g/n with external antenna Embedded eMMC Flash: 8GByte USB 2.0 Host: • 3 x User accessible external ports for external HDD, DiskOnKey/Thumb drives and other peripherals • 1 x Internal port for optional RC RF receiver Internal Flash: up to 32GByte using a fullsize SD card (not user accessible) Front indicators: Power and Status LEDs Rear indicators: Network Link and Status LEDs for both wired and wireless connections Video output: HDMI 1.3 with CEC and HDCP support Audio output: Optical SPDIF SOFTWARE OS: Android 2.3.4 (Gingerbread) UI: Comigo Smart TV Platform AUDIO and VIDEO FORMATS DLNA Resolution: up to 1920x1080p Middleware: optional, based on specific requests Video: MPEG-1 MP/HL, MPEG-2 MP/HL, MPEG-4 Part 2 ASP, WMV/VC-1 SP/MP/AP, H.264 HP@L4.1, RealVideo 8/9/10, M-JPEG and JPEG ©Comigo Ltd. 2012 All rights reserved Revision: 0.4 For more information contact: info@comigo.com Date: 11-Nov-2012 The information contained within this document is subject to change without notice. All trademarks and copyrights contained in this document are owned by their respective trademark and copyright holders. Video containers: MPEG, MPE, MPG, M2V, ISO, TS, VOB, DAT, AVI, MKV, MP4, MOV, 3GP, 3GPP, FLC, WMV, TS, FLV, RM • Android and iOS applications for Smartphones and Tablets DIMENSIONS and WEIGHT Subtitles: SRT, SUB, IDX, PGS Audio CODECs: AAC, AC-3 (Dolby Digital 5.1), ADPCM, AMR-NB, MIDI, MP2, MP3, MSADPCM, PCM, RV40, Vorbis, WMA, AAC+ (HEAAC v1), eAAC+(HE-AAC v2) Supported file formats: mkv, wmv, mpg, mpeg, dat, avi, mov, iso, mp4, rm and jpg, mp3, 3gp, TS SECURITY and DRM Optional: based on customer specific requirements LxWxH: 190x160x30 mm (with Wi-Fi antenna in folded position) Weight: • STB (w/o accessories): 330g • External power supply: 110g CERTIFICATIONS RoHS, CE, FCC, EN 55022, 55024 & 61000 (Region specific certifications available upon request) POWER External supply: 5V@2A (100-240V, 50/60Hz, wall wart with region appropriate plug) Power consumption: 5.5W (max) (without external HDD) REMOTE CONTROL Multiple options supported: • Simple Infrared (IR) with TV RC learning capability • Combo RF (2.4GHz) and IR RC with QWERTY keyboard, gyro-mouse and TV RC learning capability ©Comigo Ltd. 2012 All rights reserved Revision: 0.4 For more information contact: info@comigo.com Date: 11-Nov-2012 The information contained within this document is subject to change without notice. All trademarks and copyrights contained in this document are owned by their respective trademark and copyright holders. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co‐located for operating in conjunction with any other antenna or transmitter. ©Comigo Ltd. 2012 All rights reserved Revision: 0.4 For more information contact: info@comigo.com Date: 11-Nov-2012 The information contained within this document is subject to change without notice. All trademarks and copyrights contained in this document are owned by their respective trademark and copyright holders.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 3 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:3564b857-2dfb-11e2-0000-1bb9b2cbdcdd Producer : GPL Ghostscript 9.05 Keywords : () Modify Date : 2012:11:11 09:32:35+08:00 Create Date : 2012:11:11 09:32:35+08:00 Creator Tool : PDFCreator Version 1.5.1 Document ID : uuid:3564b857-2dfb-11e2-0000-1bb9b2cbdcdd Format : application/pdf Title : Comigo data sheet V1_b - 20121111 Creator : Raz.Dan Description : () Author : Raz.Dan Subject :EXIF Metadata provided by EXIF.tools