Communication Components CE-1819-10 PCS Band Repeater User Manual PCS GSM Multi channel Cell Extender pub
Communication Components Inc PCS Band Repeater PCS GSM Multi channel Cell Extender pub
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 325841 |
| Application ID | qiTp59dkxOAfIOUZIc3/6w== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.44kB (243053 bits) |
| Date Submitted | 2003-05-15 00:00:00 |
| Date Available | 2003-05-15 00:00:00 |
| Creation Date | 2003-05-14 11:40:26 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2003-05-14 11:40:26 |
| Document Title | PCS GSM Multi-channel Cell Extender.pub |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | dnathan |
Communication Components Inc. Tel: 201-342-3338 Fax: 201-342-3339 Email: sales@cciproducts.com PCS GSM Multi-Channel Cell Extender for Micro-Cell Base Stations General Information Model CE-1819-10 Communication Component Inc.’s Cell Extender products are designed to extend the Contents range and coverage area of Micro Base Stations in all GSM PCS applications. The Cell ExGeneral Info and tender boosts the output power of the Micro Configurations Base Stations to match the levels of conventional Base Stations allowing for cost efficient Electrical Specifications & 2 implementation of high capacity radio networks. Mechanical Specifications It also or may -noise amplification of the receive signal to improve system Information, sensitivity and to maintain a balanced link of the transmit and receive sig- Additional Options, and Ordering nals. The Cell Extender is easy to install, requires no maintenance, and is fully Block Diagram & compatible with a variety of Base Station equipment including the Ericsson Mechanical Drawing 2308 series and Nortel E-cell series Micro-BTS. The Cell Extender offers the maximum installation flexibility by allowing the Micro Base Stations to be physically distanced from the antenna and mounting structure. This overcomes the key installation drawback of the Micro Base Stations which requires both a T1 connection and an AC connection on the mounting structure. Three installation options are available. Configuration 1 - The CE-1819-10 can be mounted on the same mounting structure directly above or below the Micro Base Station. This option is ideal when an existing Micro Base Station site is being upgraded with a Cell Extender or when both AC and T1 connections are available on the mounting structure. Configuration 2 - The Micro Base Station is installed at ground level or indoors and the Cell Extender is mounted on the mounting structure, in close proximity to the antenna. This configuration is ideal for environments where AC lines and T1-connections are not easily available on the mounting structure or when it is desired to keep the Micro Base Station indoors. For this configuration, the Cell Extender should be ordered with the Remote Power Option which includes a Bias-t and Remote Power Supply module to provide DC power to the Cell Extender over the coax cable. Configuration 3 - Both the Micro Base Station and the Cell Extender are installed at the ground level or indoors. This is intended for applications where it is impractical to install any equipment other than the antenna on the mounting structure. Communication Components Inc. PCS GSM Multi-Channel Cell Extender Cell Extender Electrical & Mechanical Specification Uplink Downlink A & D Blocks 1850-1870 MHz 1930-1950 MHz B Block 1870-1885 MHz 1950-1965 MHz C Block 1895-1910 MHz 1975-1990 MHz E & F Blocks 1885-1895 MHz 1965-1975 MHz System Gain 10 dB 10 dB System Noise Figure: 2.5 dB Max. System Group Delay: 180 nanoseconds Max Pass-band Ripple: 0.5 dB Max. Output Third Order Intercept Point: +31 dBm Min. +59 dBm Min 1 dB Compression Point: +22 dBm Min. +51 dBm Min N/A 20 Watts Composite 1.5:1 Max. 1.5:1 Max. Maximum Usable GSM/EDGE Power: Input /Output VSWR: Up-Link-Down-Link Isolation 80 dB Number of Inputs/Outputs: 1/1 Power Supply Voltage: 110/220 VAC Current Consumption: 1.5/0.75 AMPS Dimensions Enclosure Connectors NEMA 4x Weather Proof 7/16 DIN Type Female Weight Mounting Communication Tel: 201-342-3338 20 Lbs. Max. Pole and/or Wall Mountable Components Inc. Fax: 201-342-3339 Communication Components Inc. PCS GSM Multi-Channel Cell Extender Additional Information The Cell Extender is specifically designed for compatibility with the a variety Micro Base Station Equipment and is guaranteed to maintain the integrity of the GSM signal upon amplification. This is achieved by utilizing state-of-the-art LDMOS technology for power amplification, monolithic Gallium-Arsenide technology low noise receive amplification, with particular emphasis on low system group delay to minimize Bit-Error-Rate (BER) of digital transmissions. The Cell Extender block consists of a single compact unit with two RF connectors and a single AC line for power. It is housed in a moisture proof NEMA 4X aluminum die-cast enclosure with integrated heat sinks and is suitable for either outdoor or indoor installations. The Cell Extender is designed to boost two pre-combined GSM or EDGE channels that are provided from the Micro Base Station. It contains redundant low noise amplifiers to boost the receive signals, redundant LDMOS-based high power amplifiers to boost the transmit signal, dual duplexers, an integrated power supply and alarm/control circuitry to monitor the operation of the unit. The Cell Extender is powered by a conventional 110/220 VAC source or can be optionally DCpowered via the Coax cable using the Remote Power Option. Options ♦ ♦ ♦ ♦ ♦ ♦ ♦ 01: 02: 03: AD: B: C: EF: Additional Rx Only Channel Monitoring Interface Remote Power Option (with Internal Bias-T) A & D Power Operation B Band Operation C Band Operation E & F Band Operation Ordering Information ♦ Model CE-1819-10 FCC Information A minimum separation distance of 2 meters between the transmit antenna and nearby persons must be maintained. If this separation distance is not maintained, this device may not be in compliance with FCC RF Exposure rules. Communication Tel: 201-342-3338 Components Inc. Fax: 201-342-3339 Block Diagram A N TEN N A R x2 A N TEN N A Tx1/ R x1 Communication Components Inc. 89 Leuning Street South Hackensack, NJ 07606 B ypass S w itch R X/ B and Pass Filter Tel: 201-342-3338 Fax: 201-342-3339 Email: sales@cciproducts.com LN A (Optional) R x / Tx D uplexer M onitor/ A larm LN A P o w er Am plifier (Optional) R x / Tx D uplexer AC/ DC Pow er Supply B ypass Sw itch com W w w . c c i p ro d u c t s . (Optional) DC Injector (Optional) B TS R x2 A C IN / A LA R M O U T (Optional) B TS Tx1/ R x1 Mechanical Drawing 10 7/8” Ordering Information: ♦ Model CE-1819-10 Options: 01: 02: 03: 13” Communication Components Inc CELL EXTENDER CE-1819-10 7” Additional Rx Channel Monitoring Interface Remote Power Option (with Internal Bias-T) ♦ AD: A & D Power Operation ♦ B: B Band Operation ♦ C: C Band Operation ♦ EF: E & F Band Operation ♦ ♦ ♦ Rx2 BTS Tx/Rx1 BTS Rx2 Ant Tx/Rx1 Ant
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2003:05:14 11:40:26-04:00 Modify Date : 2003:05:14 11:40:26-04:00 Page Count : 4 Creation Date : 2003:05:14 15:40:26Z Mod Date : 2003:05:14 15:40:26Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : dnathan Metadata Date : 2003:05:14 15:40:26Z Creator : dnathan Title : PCS GSM Multi-channel Cell Extender.pubEXIF Metadata provided by EXIF.tools