Compal Communications EB-G60U GPRS GSM Phone User Manual U COVER p65
Compal Communications, Inc. GPRS GSM Phone U COVER p65
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 328032 |
| Application ID | xIotO+M9P3ci4h5AkIhmaA== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 255.4kB (3192439 bits) |
| Date Submitted | 2003-05-27 00:00:00 |
| Date Available | 2003-05-23 00:00:00 |
| Creation Date | 2003-03-26 02:14:50 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-05-19 15:03:03 |
| Document Title | U-COVER.p65 |
| Document Creator | PageMaker 6.5C |
| Document Author: | candy |
Operating Instructions Digital Cellular Phone EB-G60U Before operating this equipment please read these instructions completely. Important Information Important Information We, Matsushita Mobile Communications Development of Europe Ltd, declare, that the EB-G60 conforms with the essential and other relevant requirements of the directive 1999/5/EC. A declaration of conformity to this effect can be found at http://www.panasonicmobile.com/support Important Information THIS PANASONIC PHONE (MODEL EB-G60U) MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio-frequency (RF) energy recommended by The Council of the European Union. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit recommended by The Council of the European Union is 1.6 W/kg.* Tests for SAR have been conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. Before a phone model is available for sale to the public, compliance with the European R&TTE directive must be shown. This directive includes as one essential requirement the protection of the health and the safety for the user and any other person. The SAR value for this model phone, when tested for use at the ear, for compliance against the standard was 1.0 W/kg averaged over a 10g mass. While there may be differences between the SAR levels of various phones and at various positions, they all meet the EU requirements for RF exposure. * The SAR limit for mobile phones used by the public is 1.6 watts/ kilogram (W/kg) averaged over ten grams of tissue. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. ii Important Information FCC RF Exposure Requirements: For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with COMPAL accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. SAR standard limit is 1.6 W/kg RF exposure FCC Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operation can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements may differ among phone models,depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. iii Important Information For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only accessories that contain no metallic components and provide a separation distance of 15mm (0.6 inches) to the body. Use of other accessories may violate FCC RF exposure guidelines and should be avoided. Health and Safety Information FCC Exposure to Radio Frequency (RF) Signals Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies: This EUT has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/ general population exposure limits specified in ANSI/IEEE Std. C95. 1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-200X (Draft 6.5, January 2002). Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg *. iv Important Information * In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in. Safety Considerations The following information should be read and understood as it provides details which will enable you to operate your phone in a manner which is both safe to you and your environment, and conforms to any legal requirements regarding the use of cellular phones. This equipment should only be charged with approved charging equipment. Other usage will invalidate any approval given to this apparatus and may be dangerous. The use of approved charging equipment is recommended to ensure optimum performance and avoid damage to your phone. Ensure the voltage rating of the Fast Travel Charger is compatible with the area of use when travelling abroad. A Fast Travel Charger is supplied with the Main Kit. Other recommended equipment for charging - Car Charger. Switch off your cellular phone when in an aircraft. The use of cellular phones in an aircraft may be dangerous to the operation of the aircraft, disrupt the cellular network and may be illegal. Failure to observe this instruction may lead to the suspension or denial of cellular phone services to the offender, or legal action or both. Do not incinerate or dispose of the battery as ordinary rubbish. The battery must be disposed of in accordance with local legislation and may be recycled. Important Information It is advised not to use the equipment at a refuelling point. Users are reminded to observe restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress. Never expose the battery to extreme temperatures (in excess of 60°C). It is imperative that the driver exercises proper control of the vehicle at all times. Do not hold a phone while you are driving; find a safe place to stop first. Do not speak into a Handsfree microphone if it will take your mind off the road. Always acquaint yourself thoroughly with restrictions concerning the use of cellular phones within the area you are driving and observe them at all times. Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids. For most efficient use hold the phone as you would any normal phone. Your G60 cellular phone is fitted with an internal antenna, located in the upper portion of the phone, back of the display screen. To avoid deterioration of signal quality or antenna performance, do not touch or “cup” the antenna area while the phone is switched on. Unauthorized modifications or attachments may damage the phone and violate applicable regulations. The use of an unapproved modification or attachment may result in the invalidation of your guarantee – this does not affect your statutory rights. This Panasonic mobile phone is designed, manufactured and tested to ensure that it complies with the specifications covering RF exposure guidelines applicable at the time of manufacture, in accordance with EU, USA FCC, and Australian ACA regulations. Please refer to our website for latest information/standards compliance in your country/region of use. http://www.panasonicmobile.com/health.html vi Care and Maintenance Care and Maintenance Pressing any of the keys may produce a loud tone. Avoid holding the phone close to the ear while pressing the keys. Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault. Do not modify or disassemble the equipment. There are no user serviceable parts. Do not subject the equipment to excessive vibration or shock. Avoid contact with liquids. If the equipment becomes wet immediately remove the power and contact your dealer. Do not leave the equipment in direct sunlight or a humid, dusty or hot area. Keep metallic items that may accidentally touch the terminals away from the equipment. Always charge the battery in a well ventilated area, not in direct sunlight, between +5°C and +35°C. It is not possible to recharge the battery if it is outside this temperature range. When connecting the phone to an external source, read the operating instructions of the equipment for the correct connection and safety precautions. Ensure the phone is compatible with the product it is being connected to. When disposing of any packing materials or old equipment check with your local authorities for information on recycling. vii Quick Reference Quick Reference Press to select Direction which the user can move around the display screen using the Navigation key Menu Representation of screen menu option Secondary Softkey Negative soft key/Back-key Numeric key pads Answer a call or call a dialled number Press to end a call or return to Idle screen. Press and hold to switch the phone on or off. Indicates that a function is SIM Dependent Indicates that a function is Network Dependent viii Contents Important Information ............................................................................................. i Safety Considerations ....................................................................................... iii Care and Maintenance ............................................................................................. v Quick Reference ...................................................................................................... vi Getting to Know Your Phone .................................................................................. x Location of Controls ......................................................................................... x Getting Started ....................................................................................................... 1 Fitting the SIM ................................................................................................... 2 Removing the SIM ............................................................................................. 2 Fitting the Battery .............................................................................................. 3 Removing the Battery ........................................................................................ 3 Charging the Battery ......................................................................................... 4 Operation of Battery Level Indicator ................................................................. 5 Low Battery Warning ........................................................................................ 5 Fitting Image-In ................................................................................................. 5 The Display ....................................................................................................... 6 Menu System Overview .................................................................................... 7 Selecting a Function ........................................................................................... 8 Basic Operation ..................................................................................................... 10 Switching On & Off ......................................................................................... 10 Making a Call ................................................................................................... 10 International Dialling ........................................................................................ 11 Emergency Calls .............................................................................................. 11 Ending a Call ................................................................................................... 11 Answering a Call ............................................................................................. 11 Caller Identification ......................................................................................... 12 Volume Control .............................................................................................. 12 Locking the Phone ........................................................................................... 12 Using the PIN .................................................................................................. 13 Setting Ring Volume ........................................................................................ 14 Setting Quiet Mode ......................................................................................... 14 Phonebook ............................................................................................................. 15 Browsing Phonebook ...................................................................................... 16 Retrieving a Number ....................................................................................... 16 Speed Dialling .................................................................................................. 17 Editing Phonebook Entries .............................................................................. 18 Synchronizing Phonebooks .............................................................................. 19 Review the Phonebook Status ......................................................................... 19 Grouping Phonebook Entries .......................................................................... 20 Info Dial and Service Dial ................................................................................ 22 My Numbers .......................................................................................................... 23 Personalising Your Phone ...................................................................................... 24 Changing the Language .................................................................................... 24 Add a Start-up Greeting .................................................................................. 24 Idle Screen Image ............................................................................................ 25 Changing Screen Saver Image .......................................................................... 26 ix Turning Screen Saver On & Off ....................................................................... 26 Colour Themes ............................................................................................... 27 Changing Sound Profiles .................................................................................. 27 Editing Sound Profiles ...................................................................................... 28 Download Data ( ) ........................................................................................ 29 Media Folders .................................................................................................. 29 Composing a Melody ...................................................................................... 30 Setting the Backlight Time ............................................................................... 31 Contrast .......................................................................................................... 31 Operator Notice ............................................................................................. 32 Restoring the Default Phone Settings .............................................................. 32 Phone Security ...................................................................................................... 33 Enabling Key Guard ......................................................................................... 34 Disabling Key Guard ........................................................................................ 34 Changing the Security Codes .......................................................................... 35 Restricting Calls ............................................................................................... 35 Applications ........................................................................................................... 37 Clock .............................................................................................................. 37 Setting the Time .............................................................................................. 37 Setting the Alarm ............................................................................................. 38 Muting the Alarm ............................................................................................ 39 Setting a Power On / Off Time ........................................................................ 39 Calculator ........................................................................................................ 40 Messaging ............................................................................................................... 41 SMS/EMS: Setting up the Phone ...................................................................... 42 Creating a Text Message .................................................................................. 44 Concatenated messages .................................................................................. 46 Receiving Text Messages .................................................................................. 46 Responding to Text Messages .......................................................................... 47 Chat SMS ........................................................................................................ 48 MMS: Setting Up the Phone ............................................................................ 49 MMS Configuration ......................................................................................... 50 Creating an MMS Message .............................................................................. 51 Managing Message Lists ................................................................................... 53 Cell Broadcasts ............................................................................................... 54 Call Information ..................................................................................................... 56 Recent Numbers ............................................................................................. 56 Call Duration ................................................................................................... 57 GPRS Call Duration ......................................................................................... 58 Call Charges .................................................................................................... 58 Setting the Unit Price ...................................................................................... 59 Setting the Maximum Unit Level ..................................................................... 59 Call Identification ............................................................................................. 60 Advanced Operation ............................................................................................. 61 Diverting Calls ................................................................................................. 61 Holding Calls and Call Waiting ......................................................................... 62 Making a Second Call ...................................................................................... 62 Receiving a Second Call ................................................................................... 63 Accepting a Second Call .................................................................................. 63 Rejecting a Second Call ................................................................................... 63 Ending Current Call to Receive Another ......................................................... 63 Operation During Two Calls ............................................................................ 63 Call Transfer .................................................................................................... 64 Multi-party Calls .............................................................................................. 64 Changing to a New Network .......................................................................... 66 Schedule ................................................................................................................. 67 Creating a Reminder ....................................................................................... 67 Viewing & Editing Reminders .......................................................................... 68 Games ..................................................................................................................... 69 Embedded Games ........................................................................................... 69 Downloadable Games ..................................................................................... 69 Game Settings ................................................................................................. 70 Managing Multimedia Files .................................................................................... 71 Displaying Pictures and Animations ................................................................. 71 Playing Melodies .............................................................................................. 72 Renaming Files ................................................................................................. 72 Creating Mail from Files .................................................................................. 73 Deleting Files ................................................................................................... 73 Checking File Properties ................................................................................. 73 Checking Folder Properties ............................................................................. 74 WAP Browser ........................................................................................................ 75 Browser Settings ............................................................................................. 75 Activating the Browser .................................................................................... 78 Navigating Content ......................................................................................... 78 Browser Menu ................................................................................................ 79 Using Bookmarks ............................................................................................ 81 Deactivating the Browser ................................................................................ 82 Additional Features ............................................................................................... 83 Voice Memo .................................................................................................... 83 DTMF Tones ................................................................................................... 85 Note Pad ......................................................................................................... 85 Desktop Handsfree ......................................................................................... 86 Auto Answer ................................................................................................... 86 Camera Accessory ................................................................................................. 87 Taking a picture ............................................................................................... 87 Camera Accessory ................................................................................................. 87 Camera Options ............................................................................................. 88 Text Entry ............................................................................................................... 89 T9® Text Input ................................................................................................. 90 Other Text Modes ........................................................................................... 90 Editing Text ..................................................................................................... 90 Trouble Shooting ................................................................................................... 91 Important Error Messages ............................................................................... 93 Glossary of Terms ................................................................................................... 95 Specifications ......................................................................................................... 97 Phone (Including Battery) ................................................................................ 97 EU Warranty .......................................................................................................... 98 Personal Settings ................................................................................................. 104 Menu Structure ................................................................................................... 105 Note ..................................................................................................................... 106 Licensing ............................................................................................................... 107 xi Getting to Know Your Phone Getting to Know Your Phone Location of Controls Earpiece Microphone Socket Display Secondary Softkey Negative Softkey Call Key Power On/Off, Back-Key Primary Softkey Keypad Microphone xii Getting Started Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on GSM networks – GSM850, GSM1900. It also supports GPRS for packet data connections. Ensure the battery is fully charged before use. Before operating this phone please read the Important Information section - see page i. These operating instructions detail use of the equipment contained in the Main Kit. Some services detailed are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your Service Provider. Getting Started Fitting the SIM The SIM is inserted into the back of the phone underneath the battery. 1 Remove the battery - see Removing the Battery page 3. 2 Unlock the SIM retainer by sliding it up towards the top of the phone (X). 3 Gently raise the SIM retainer (Y). 4 Place the SIM into its recess, ensuring the bevelled corner is positioned in the top right corner (Z). 5 Move the SIM retainer back into position ([) and secure by sliding downwards (\). The SIM retainer is properly locked when it has clicked into position. Note: Ensure the SIM retainer is properly locked into position. Failure to do so will inhibit the fitting of the battery and the battery cover. Removing the SIM Unlock the SIM retainer by gently pushing towards the top of the phone (X). Gently raise the SIM retainer (Y) and remove the SIM (Z). Return the SIM retainer to its flat position ([) and ensure it is correctly locked (\) before refitting the battery and battery cover. Getting Started Fitting the Battery Insert the battery bottom first so that the connectors touch those on the phone. Press gently downwards and simultaneously slot the top of the battery into place. Removing the Battery Ensure the phone is switched off and the charger is disconnected from the phone before removing the battery. Lever the battery out from the notch in the top edge. Getting Started Charging the Battery Connecting the Fast Travel Charger The battery must be fitted in the phone before the charger is connected. Insert the connector into the base of the phone, ensuring the arrow on the connector is to the front of the phone. Note: DO NOT force the connector as this may damage the phone and /or the charger. Connect the charger to the mains power supply. The battery level indicator will scroll right to left during charging. Disconnecting the Fast Travel Charger When charging is complete, disconnect the charger from the mains power supply. Getting Started Operation of Battery Level Indicator Phone on Phone off While charging Charging complete Charging indicator off It is recommended that the battery is fully discharged between charges to maintain optimum battery life and performance. Low Battery Warning When the battery power is low, the battery indicator will be coloured red. If battery power is critically low, a warning tone will sound, and a BATTERY IS EMPTY! message will be displayed. If this occurs during conversation, finish your call immediately. The power will automatically shut off after the warning tone. Fully recharge the battery. See Charging the Battery, page 4. Calls can be made and received while the phone is charging. Fitting Image-In Customised image cards may be fitted to the rear of the phone, behind the transparent rear cover. An Image-In template is included with your phone. Getting Started The Display Following some operations the display will automatically clear after three seconds or after pressing any key. Status Icons The status icons are displayed according to the currently activated functions. The Antenna, Signal and Battery icons are displayed when the handset is switched on and connected to a network. Indicates Battery Level: (green)- full, (red) - low battery Displayed when you are registered to a non-home network Roaming White icon indicates a new message has been received. Red icon indicates the message store is full. Indicates Alarm is set Indicates Call Divert is enabled Voicemail activated Indicates Ringer is enabled ( = vibration mode / = vibrate + ring / = flashing mode) Indicates GPRS service available Indicates it is possible to make emergency calls only GSM signal strength: - weak signal, - strong signal Getting Started Menu System Overview The menu system provides the means for accessing all the functions that do not have their own dedicated buttons on the keypad. Each menu contains a list of options. Some menus have further submenus. The submenus and functions are selected using the five-way Navigation key ( ). The diagram below gives an overview of the contents of the menus to help you find your away around. This is just a summary. Keep reading to discover everything your phone has to offer. My Phone Phonebook Create and manage your phonebook Set interface language Choose ring tones and alert method Group friends and contacts to make their calls easy to identify and their numbers easy to find Customize your colour scheme Change idle screen picture and screen saver Put your closest friends and contacts on your Hot Key Dial List for instant dialling Synchronise your SIM and Mobile Phonebooks Games Browser Access and surf the Internet Access preinstalled and downloaded games. Availability of downloadable games is network dependent Configure browser settings Messages Phone Option Access security features and call services Compose and send text and multi media messages Set up call diversion Add sounds and images to messages If an STK SIM card is fitted, this menu gives access to operator-specific functions. The Phone Option menu can also be accessed from the Accessories menu. Key Guard Guard your phone against accidental use Scheduler Add and view events in your personal schedule Applications Download games (depending on your network) Record and listen to voice memos Make use of built-in calculator, write your own ring tones and change clock settings Getting Started Selecting a Function Use and to move between the icons on the screen. When a pardisplays a submenu. From any ticular menu is highlighted, pressing to select. submenu, use until the required item is highlighted. Press For example, to change Sound Setting (to switch ringtone): From the Idle screen, press to display the main menu Use to highlight the My Phone menu to enter the menu Press Use once to highlight the Sound Settings menu and press to enter to enter Use to highlight the mode you wish to set and press to activate your chosen mode Press Following some operations the display will automatically clear after three seconds. If this is not the case press to return to the idle screen. Shortcuts ( Getting Started When familiar with the layout of the menu, use the keypad to enter the Menu Number. This will allow the user to obtain the required function without having to navigate through the display menus. To change Sound to display the main Setting, for example, from the Idle screen, press menu, then press 12 to enter the Sound Settings submenu. Basic Operation Basic Operation This section contains the information you need for the most essential phone operations, including: D How to switch on and off D How to make and end a call D How to answer a call D How to change earpiece volume D How to lock the phone D How to protect the phone using a PIN D How to change ring volume Switching On & Off To turn the phone on or off, press and hold down When the phone is switched on a greeting will be displayed and then the phone will go into Idle. The Greeting can be set in the My Phone > Display Settings > Greeting menu. See Adding a Start-up Greeting, page 24. Making a Call Ensure that the phone is switched on, the network operator logo is displayed and the signal strength meter shows network coverage is available in the current area. 1 Enter area code and phone number 2 Press 10 Basic Operation International Dialling The international code for the destination country / region should be entered , followed by the area code and phone number. To enter the international code, select an international line by pressing until + appears, then enter the country / region code (e.g. 44 for the UK; 81 for Japan). Note: Many countries / regions include an initial “0” in the area code. This should, in most cases, be omitted when dialling international numbers. If you have difficulties making international calls, contact your Service Provider. Emergency Calls To make an emergency call, the antenna symbol ( ) must be present. To made an emergency call, enter 112 then press Ending a Call To end a call, press Answering a Call To receive a call, the phone must be switched on and the signal strength meter must be displayed. to answer a call Press any key except Press to reject a call Note: If a call is not answered or is rejected, the number of incoming calls missed will be displayed. Press any key to clear the display. 11 Basic Operation Caller Identification The caller’s phone number, and name if stored in the Phonebook, will be displayed during an incoming call. Note: Caller Identification may not always be available. Volume Control The volume level may be adjusted during a call: Use to decrease the volume; use to increase the volume Note: Volume control for the Personal Handsfree accessory is adjusted in the same manner. Locking the Phone With the Phone Lock enabled you will be restricted to answering incoming calls only. The Phone Lock Code is factory set to 0000. and select (Applications >) Phone Option 1 From Idle press > Security > Phone Lock. Press 2 From the submenu select Status 3 Select On and press 4 Enter the 4-digit code and press The lock icon will be displayed in the primary selection area. Unlocking the Phone Enter your Lock Code. The lock icon will be replaced by OK. Press to confirm. As long as the Phone Lock is enabled, whenever you turn on the phone, the Lock Code will need to be re-entered to activate the code. 12 Changing Phone Lock Code Basic Operation You should change your phone lock code to a 4-digit number of your own choice. and select (Applications >) Phone Option 1 From Idle press > Security > Phone Lock. Press 2 From the submenu select Change Code and press 3 Enter the Old Unlock Code and press 4 Enter a New Unlock Code and press 5 Re-enter the New Unlock Code to confirm. Press to complete the change. Disabling Phone Lock The phone must be unlocked before the phone lock can be disabled. 1 From Idle press , select (Applications >) Phone Option > Security > Phone Lock. Press 2 From the submenu select Status and press 3 Select Off and press 4 Enter the 4-digit code and press Using the PIN The PIN protects your SIM against unauthorized use. If you enable the PIN, every time the phone is turned on you will be prompted to enter the PIN. PIN2 controls security for the Fixed Dial Store, Call Charge metering and Barred Dial list. If either PIN/PIN2 is entered incorrectly 3 times the phone will be locked and the user will need to enter the PUK/PUK2 code. Contact your service provider for the PUK/PUK2 code. Note: If the PUK/PUK2 code is entered incorrectly 10 times, the SIM will cease to operate. All information stored in the SIM will be lost and the SIM will need to be replaced. Contact your service provider for more details. 13 Basic Operation Enabling/Disabling the PIN From Idle press , select (Applications >) Phone Option > Security > PIN. Press Select Status Select On or Off from the submenu You will be prompted to enter the PIN. On first use, enter PIN of your choice (Between 4 and 8 digits) and press Setting Ring Volume With the G60U, you can set up your phone in different modes depending on your environment, allowing different ring tones and volumes in different situations. To change ring volume for any sound profile: 1 From Idle press , select My Phone > Sound Settings 2 Select the profile you wish to adjust then select Edit > Ring Volume 3 Use to set the volume level Turn to Personalising Your Phone, page 24, for more information on setting different ring modes. Setting Quiet Mode You may wish to set at least one mode as a silent mode. To do this, set Call Alert Method for that mode to Vibration: 1 From Idle press , select My Phone > Sound Settings 2 Select the profile you wish to adjust then select Edit > In-Call Alerting 3 Select Vibration Note: Once you have set the ring volume / type for a mode, you can make that the active mode at any time by selecting My Phone > Sound Settings, choosing the desired mode then choosing Activate. Turn to Personalising Your Phone, page 24, for more information on setting different ring modes. 14 Phonebook Phonebook Phone numbers can be stored in two locations: In the SIM Phonebook ( ), where the number of entries and lengths of names and numbers are SIM dependent. In the Mobile Phonebook, where phonebook entries can be grouped together and additional data can be stored with numbers. This phonebook is retained even if you change your SIM. This section tells you all you need to know about: D Managing your Phonebooks D Finding entries in your Phonebooks D Speed Dialling D Grouping Phonebook entries to make calls easier to identify and numbers easier to find Note: See Text Entry, page 84, for information on text entry methods available for making Phonebook entries. To Store a Number in the SIM Phonebook From Idle enter the phone number and press From the menu select SIM Phonebook and press Select Name, press and enter identifying name. Press Select No. and confirm the phone number. Press Press to save 15 Phonebook To Store a Number in the Mobile Phonebook From Idle enter the phone number and press From the menu select Mobile Phonebook and press Select Name, press and enter identifying name. Press Select No. and confirm the phone number. Press Select and enter Email address. (optional) Press Select a Group - see Grouping Phonebook Entries - into which to place the entry (optional) Enter a Hot Key Dial number from to (optional) Browsing Phonebook You can browse both Phonebooks simultaneously by name. Use the direction keys to move through the contact list or press a lettered key to skip to the first entry starting with that letter. 1 From Idle press 2 Use (or the lettered keys) to select the entry you wish to browse Retrieving a Number 16 Browse to locate and highlight the desired number in the Phonebooks to dial the number Press Phonebook Speed Dialling Last Number Called From Idle press twice Hot Key Dialling From Idle press and hold the appropriate hot key number. To view your hot key dial list, from Idle press Hot Key Dial List , select Phonebook > Assigning Hot Keys To assign a hot key to a frequently used number: 1 Browse to locate and highlight the desired number in the Phonebooks. Press 2 Select Edit > Hot Key Dial 3 Enter the Hot Key dial number (from to ) for this entry Note: If the Hot Key number is already taken, an ID Used message will appear. Note: Some Hot Key Phone numbers may be reserved by the Service Provider. For example the first three Hot Key Phone numbers may be linked to Service Dial ( ). Info Numbers or Service Dial Your Service Provider may program some special phone numbers into your SIM ( ). It is not possible to modify these: 1 Press and hold 2 Use to browse through the Service Dial list of phone numbers 17 Phonebook Editing Phonebook Entries It is possible to view Entry Details, Edit, Delete, Create or Copy Entry information from the Phonebooks. To access any of these functions: With a phone number or name highlighted: to select the submenu 1 Press to cycle through Entry 2 Use Details, Edit, Delete, Create or Copy Entry 3 Press to select an option Entry Details Displays each element of the selected Phonebook entry: Name, number to edit the name or number. and location of entry (SIM or phone). Press Edit Displays the entry allowing you to make changes as required. Press when you have completed editing. save any changes and to Delete Deletes the entry from the Phonebook. Press to confirm deletion. Create Creates a new entry in the Phonebooks. Select SIM Phonebook or Mobile Phonebook as entry location. Copy Entry Use to copy an entry between Phonebooks. 18 Phonebook Synchronizing Phonebooks Keep your SIM and Mobile Phonebooks in step by synchronizing their contents regularly. You can copy individual entries between phonebooks (see Editing Phonebook Entries, page 18) or simply copy the entire contents of one phonebook into the other. To do this: and select 1 From Idle, press Phonebook > Copy Entries. Press Use to either copies the entries of SIM to Phone or Phone to SIM. Press to select Review the Phonebook Status The Review function in the Phonebook menu shows how many locations are available in the two Phonebooks. 1 From Idle press , select Phonebook > Review 2 Use to select SIM Phonebook or Mobile Phonebook and press A summary of the selected Phonebook will be displayed. 19 Phonebook Grouping Phonebook Entries Groups are used to collect together types of Phonebook entries, for example business and personal. Each group can be suitably titled for quick access to the entries contained within. An alert profile can be attributed to groups (or individual phone numbers) allowing incoming call alerts to be tailored to indicate the type of caller. Adding a Number to a Group You can store numbers in up to 10 groups. To add a number from your Mobile Phonebook to a group: 1 From Idle press 2 Use (or the lettered keys) to select the entry you wish to add. Press to reveal the submenu 3 Select Edit. If the entry is stored in the Mobile Phonebook, its group location will be shown (Group: None is displayed if the number does not belong to a group) 4 Select Group and press 5 Scroll through the list of available groups and select whichever is appropriate 20 Retrieving a Number from a Group Phonebook From Idle press , select Phonebook > Group Setting Use to select the group to enter the submenu and press again to View the Press contents of the group Use to select the desired entry Press to dial the number or to edit the details of the entry Retitling Group Names Fr o m I d l e p r e s s , select Phonebook > Group Setting Use to select the group Press to enter the submenu, select Edit and press again Name is highlighted at the top of the once to start submenu. Press editing the name and a second time to confirm Setting Group Ring Tones Each group can be given a distinct Alert Profile so that incoming calls are recognizable from their ring tone. To set a group’s ring tone: 1 From Idle press , select Phonebook > Group Setting again 2 Use to select the group, select Edit and press again 3 Select Ring and press 4 Scroll through and select the desired ring tone. Press to select 21 Phonebook Setting Group Call Icons You can also attach to a group an image that will display when a call is received. To add an image: 1 From Idle press , select Phonebook > Group Setting again 2 Use to select the group, select Edit and press 3 Select Icon and press again 4 Scroll through and select the desired icon. Press to select Info Dial and Service Dial ( ) The Info Dial and Service Dial items on the Phonebook menu provide space for operators to include useful numbers. If your operator does not offer these services, these spaces will be blank. 22 My Numbers My Numbers My Numbers is a convenient part of the Phonebook where your own voice, fax and data phone numbers can be stored and viewed ( ). Adding Numbers From Idle press and select Phonebook > My Numbers. Press Select an empty entry from the list of numbers. Press Select Edit and press Select and enter the Name (see Text Entry, page 84) and press to save Note: If using T9® text input (recommended) then move moving otherwise an alternative word will be selected. Select and enter the phone No. and press before twice Viewing Stored Numbers From Idle press If more than one number is available then use to select the listed numbers. Press Select Entry Details to view entry. Press Press again if you wish to edit the details , select Phonebook > My Numbers. Press to cycle through 23 Personalising Your Phone Personalising Your Phone This section contains all the information you need to adapt your phone to your needs and personality. You can: D Change the menu language D Add a message to show at start-up D Try a new idle screen image D Change your screen saver image D Use a different colour theme D Switch between and edit different user profiles D Make use of downloaded ring tones and images D Compose your own ring tone D Change the backlight and contrast settings ...and more! Changing the Language It is possible to change the language the phone uses for display messages and /or text entry ( ) . 1 From Idle, press , select My Phone > Language 2 Use to select the Language you wish to use to select the desired language 3 Press Add a Start-up Greeting A personalised greeting can be programmed for when the phone is switched on. , select My 1 From Idle press Phone > Display Settings > Greeting. Press 2 Use the text entry facility to add a greeting (see Text Entry, page 84). Press to confirm 24 Personalising Your Phone Idle Screen Image The idle screen can be changed to a preinstalled or downloaded image. To choose an image for the Idle screen: , select My Phone > Display Settings > 1 From Idle press Idle Screen. Press 2 Several images are preinstalled on your phone in the Fixed Data folder. Downloaded images are stored in the User Data folder. Navigate to the appropriate folder and use to select the required image 3 Use to view image. Press any key to return 4 Highlight the image you want and press to select 25 Personalising Your Phone Changing Screen Saver Image The screen saver can also be changed to a preinstalled or downloaded image. To choose an image for the screen saver: , select My Phone > Display Settings > 1 From Idle press Screen Saver. Press 2 Several images are preinstalled on your phone in the Fixed Data folder. Downloaded images are stored in the User Data folder. Navigate to the appropriate folder and use to select the required image 3 Use to view image. Press any key to return 4 Highlight the image you want and press to select Turning Screen Saver On & Off Select My Phone > Display Settings > Screen Saver > Setting to turn the screen saver function On or Off, and to set the Idle Time (from 1 to 5 minutes) before the screen saver is launched. 26 Personalising Your Phone Colour Themes Colour Themes provide alternative combinations of colours for the background and text. To use or change a Colour Theme: and select My Phone > Display Settings > 1 From Idle press Colour Themes 2 Use to select the required Colour Theme. Press Changing Sound Profiles You can switch between six sound profiles on your phone each with a distinct combination of alert method, ring tone and type etc. Profiles are set up for use in different environments - for instance you might want to create a silent profile, a discreet profile with ring tone appropriate for formal occasions and a party profile for loud environments. Within each profile, distinct melodies can be set as incoming call and message alerts. Note: Ring tones can also be used to identify incoming calls from members of groups. If a group member calls, the Group ring tone will sound, not the Sound Profile ring tone. To activate a Sound Profile: 1 From Idle press select My Phone > Sound Settings 2 Select the Profile you wish to activate from the list. Press 3 Press again to activate that Profile 27 Personalising Your Phone Editing Sound Profiles To edit a Profile: and select My 1 From Idle press Phone > Sound Settings 2 Select the Profile you wish to edit from the list. Press 3 Use to select Edit. Press For each profile, you can set and edit the following: Ring Type Select a ring tone from the lists of preinstalled melodies (Fixed Data) or downloaded melodies / ring tones that you have written (User to preview the ring Data). Press tone and to confirm ring tone selection In-Call Alerting Select from Ringer / Vibration / Vibration and Ring / Flashing / Off Ring Pattern Select either Continuous or Once Ring Volume Use to set the volume level. To mute volume, use the In-call Alerting submenu Message Type Select the alert type for incoming message (Ringer / Vibrate and Ring / Off) Message Tone Select a ring tone from the lists of preinstalled melodies (Fixed Data) or downloaded melodies / ring tones that you have written (User Data). Press to preview the ring to confirm ring tone selection tone and Keypad Tone Turn keypad tones On or Off Warning Tone Turn warning tones (which sound if an inappropriate key stroke is made) On or Off 28 Personalising Your Phone Download Data ( ) The Panasonic G60U is able to use various downloaded data. The downloaded data is stored in the Media Folder and can be acquired via MMS, EMS, SMS or WAP. Details of this service are available on our website. Availability of this service is dependant on your country/region, or network. For further information visit: http://www.panasonicbox.com Media Folders The Media Folder located at My Phone > Media Folder is the storage location for media files that have been downloaded from a third party source and are saved in the handset. Some of these can be used as ring tones, Idle screen images or attachments to text messages. See Managing Multimedia Files, page 69, for how to use these files. Note: It is only possible to attach EMS format Animations/Pictures Access these files from the Media Folder menu to rename, delete or edit them. To select an item from the Media Folder: select My Phone > Media Folder and press 1 From Idle, press Use to select the media type (either Picture, Animation or Melody) Use to select a file Press to view or play the selected file before making any changes to the file. 4 Press and use to select Rename, Delete or Delete All. Press 29 Personalising Your Phone Composing a Melody From Idle, press , select Applications > Edit Ringtone Press and then select New Tone. Using the table below as reference, enter the notes, set the rhythm and octave for each and add rests to generate your composition. Key Note Rest Note Length Set Octave Dotted Note Sharp Key Note 30 Referring to the table above, use the to to enter notes. keys The notes appear in the format 2C4 as shown on the right. The first number (2) indicates the note octave. The default value is 2. Press to change octave (range from 1 to 3). The number of the right (4 in the first picture on the right) indicates the notes length. The default value is 1/4. Press to change note length (range from 1 to 1/32). In the second picture on the right, the octave has been left unchanged at 2 while the note length has been shorted to 1/32. Indicate dotted notes (i.e. notes extended in length) by pressing Add sharp values to notes by pressing Enter rests by pressing Personalising Your Phone Note: At any time during composing press rent melody. to play back the cur- When the composition is complete, press twice and enter the to save the name and to complete composing. title. Press Setting the Backlight Time The Backlight is illuminated when a key is pressed to make using your phone easier. You may wish to reduce backlight time to increase the time your phone will run between battery charges. 1 From Idle, press , select My Phone > Display Settings > Backlight Time 2 Use to cycle through the times available (Off / 10 seconds / 30 seconds / 60 seconds) to select the desired time 3 Press Contrast Screen contrast can be altered for viewing in different lighting conditions: , select My 1 From Idle, press Phone > Display Settings > Contrast 2 Use to set the desired contrast level 3 Press to confirm selection 31 Personalising Your Phone Operator Notice Operator notices appear if the phone has been left idle to remind users how to operate selected features. To enable and disable operator notices go to My Phone > Display Settings > Operator Notice and press . Restoring the Default Phone Settings Any personal settings can be swiftly returned to their factory default, with the exception of some features, such as the Phone Lock code and the Language. , select My 1 From Idle, press Phone > Defaults 2 When prompted Use Default Settings? press to confirm and restore the settings 32 Phone Security Phone Security Your phone has a number of security features that protect against unauthorized use and enable the user to restrict access to certain functions. These include: D Phone Lock D PIN Protection D Key Guard D Call Barring D Fixed Dial Note: For full details of the Phone Lock feature, turn to Locking the Phone, page 12. Note: For full details of PIN Protection, turn to Using the PIN, page 13. It is recommended that all security codes are memorized. If it is necessary to make a note of any security codes, never write them in a way that they can be recognized by another person. If forgotten, contact your dealer (for the Phone Lock Code) or Service Provider (for PIN and PIN2). 33 Phone Security Enabling Key Guard The Key Guard function is used to prevent any keys from being accidentally pressed, for instance when the phone is being carried. twice to bring up the From Idle press Guard Keypad? message and a third time to confirm. The Key Guard icon ( ) will appear on the Idle screen When a call is received, Key Guard will be disabled temporarily, allowing to answer the call. Emergency calls the user to press any key except can still be made - see Emergency Calls, page 11. Note: When making emergency calls with the “Key Guard” enabled, there will be no audible or visual indication that the number is being dialled Disabling Key Guard Press once to bring up the Free Keypad? message and a second time to confirm. 34 Phone Security Changing the Security Codes From Idle press and select (Applications >) Phone Option > Security Use to select Phone Lock, PIN or PIN2 Use to select Change Code and press Enter the current code and press Enter the new code and press Verify the new code and press Restricting Calls Call Barring The Call Bar function is used to restrict certain outgoing and/or incoming calls. Call Barring is controlled by a security password that is supplied by the Service Provider (this password can be changed: see below). When updating or checking the status of Call Barring the phone must be registered with a network. Different Call Bar restrictions can be used for voice and data calls. Any combination of call restrictions can be set. 1 From Idle press and select (Applications >) Phone Option > Security > Call Bar. Press 2 Use to select Bar Voice or Bar Data 3 Follow the submenus to set the desired restrictions 35 Phone Security Outgoing Calls Select from All Calls / International Calls / International Calls Except Home / Off Incoming Calls Select from Off / When Roaming / All Calls Data Calls Select from All Calls / International Calls / International Calls Except Home / Off 4 Enter Call Bar password and press Note: To change Call Barring password, go to (Applications >) Phone Option > Security > Change Password You can change individual Call Barring settings following the instructions above or cancel all call barring settings by selecting (Applications >) Phone Option > Security > Cancel All. Fixed Dial The Fixed Dial Store is part of Phonebook (Phonebook > Fixed Dial), but with additional security. When the security feature Fixed Dial is enabled in the security submenu it is only possible to make calls with phone numbers that are in the Fixed Dial Store. When Fixed Dial is enabled any manually dialled phone numbers must match a phone number in the Fixed Dial Store. To store, edit or delete a phone number in the Fixed Dial Store the Fixed Dial function must be enabled. With Fixed Dial enabled, all phone numbers can be added, edited or deleted as normal, but you will be prompted for PIN2. To enable Fixed Dial: and select (Applications >) Phone Option 1 From Idle press > Security > Fixed Dial. Press 2 You will be prompted to enter SIM PIN2 before proceeding. 36 Applications Applications This section introduces some of the applications you’ll find installed on your phone. These include: D The clock D Alarms D Automated power on and power off D The calculator Clock Your phone incorporates a clock with date/time, an alarm and an automatic power on/off feature. Setting the Time From Idle press and select Applications > Clock Function > Clock Set to select the time entry Press Use the numbered keys to enter the correct time (using the 24-hour clock) or use to adjust the time displayed. Move between the hour and minute fields using When the time is entered correctly, press to confirm 37 Applications Setting the Alarm Up to three separate alarms can be set. For each alarm, you can set different schedules (e.g. daily / weekdays only) and alarm tones as well as times. If the clock hasn’t been set, the user will be prompted to set it prior to setting the alarm. To set an alarm and select Ap1 From Idle press plications > Clock Function > Alarm Set. Press Use to select the alarm to be set (By default the alarms are named Alarm1, Alarm2 and Alarm3. These names can be changed -- see step 7 below). Press First set the alarm time. Press to enter Setting Time Use the numbered keys to enter the correct alarm time (using the 24-hour clock) or use to adjust the time displayed. Move between the hour and minute fields using Press when complete Use to highlight the desired sched- ule for the alarm and press to select Select Melody and highlight and select the desired alarm melody from to confirm the submenu. Press Select Rename and enter a name for the alarm setting When the alarm has been set, and the clock is displayed, will be displayed when the phone is in Idle. Note : To disable an alarm setting, select Applications > Clock Function > Alarm Set > [Alarm Name] > Cancel 38 Applications Muting the Alarm When an alarm goes off, the chosen melody will sound and the display will flash with an alarm message. The alarm will sound for 30 seconds. If the alarm is due during a call, it will activate a vibration alert. To end the alarm: Press any key Adjusting the Alarm Time To adjust an alarm time follow the steps in Setting the Alarm, page 38. Setting a Power On / Off Time The phone can be set to turn itself on or off automatically at a specified time using the Power On / Off feature. To set the Power On and Off schedule: and select Ap1 From Idle press plications > Clock Function 2 Select Power On Time or Power Off Time. Press Use the numbered keys to enter the correct Power On or Power Off time or use to adjust the time displayed. Move between the hour and minute fields using Press when complete The Power On / Power Off setting can be applied once when the set time is next reached (Enable Once) or until cancelled (Enable Always). Highlight the appropriate setting and press to select is similar to that for setting the time on the clock. For either setting or adjusting the time needed to select Power On Time or Power Off Time in the Clock Function menu 39 Applications Caution: Ensure that the setting of the Alarm or Power On function will not contravene any regulations whereby it may automatically power on when in an aircraft or medical facility etc. - see Important Information, page I. Note : To disable a Power On or Power Off setting select Applications > Clock Function > Power On Time / Power Off Time > Time (ignore) > Disable. Calculator The four function calculator will enable the user to perform simple arithmetic calculations (addition/subtraction/multiplication and division). and select Ap1 From Idle press 40 plications > Calculator. Press Enter a number (maximum 8 digits) and it will be displayed on the upper right of the display. If a decimal point is required, press Use to scroll through and select the arithmetic operation you wish to perform Enter a second number (maximum 8 digits). It will be displayed next to the operation symbol Press to complete the calculation Messages Messaging Your phone has various messaging features including SMS, MMS and EMS. SMS/EMS - Enter the recipient’s phone number to send text and images. MMS - Attach images and music to text messages. This chapter is a full introduction to messaging including: D Setting up your phone to enable SMS/EMS and MMS messaging D Writing text messages D Sending Quick Notes D Adding attachments to text messages D Reading incoming messages D Managing messages in your Inbox and Outbox D Chatting with SMS contacts D Creating multimedia messages D Receiving message broadcasts on desired topics 41 Messages SMS/EMS: Setting up the Phone It is possible to receive, display, edit and/or send text messages of up to 459 characters (dependent upon the language being used) to mobile phones on your service provider’s network or any network that has a roaming agreement (dependent on the recipient’s phone parameters). Before a text message can be sent, you must enter the Message Centre number into Options (your Service Provider will supply the Message Centre number). You should also select the protocol via which messages are sent, the storage time (lifetime) and pick a delivery confirmation setting. The Message Centre number may have been pre-programmed on the SIM. Setting the Message Centre Number From Idle press , select Messages > Options > SMS/EMS > Message Centre. Press Include the international dialling code in the Message Centre number. Lifetime The lifetime is the duration that your messages are stored at the Message Centre. Delivery attempts will be repeated until the message has been delivered or the Lifetime expires. From Idle press , select Messages > Options > SMS/EMS > Lifetime. Press Select from 1 hour, 12 hours, 1 day, 1 week or Maximum to set the time after which messages are automatically deleted. 42 Messaging Protocol Messages From Idle press , select Messages > Options > SMS/EMS > Protocol. Press Select the appropriate protocol for sending messages or maintain the Default setting. Delivery Confirmation Setting From Idle press , select Messages > Options > SMS/EMS > Report. Press Select Yes to enable delivery confirmation for your messages, No to disable the function and Ask to prompt the message recipient to acknowledge receipt. 43 Messages Creating a Text Message 44 From Idle press , select Messages > Create > SMS/EMS. Press Write text message. To change text input method (displayed in lower left corner of screen), press . See Text Entry, page 84, for details. to navigate through the mesUse sage and position the cursor to add text to delete the character to Use the left of the cursor Press to cancel the message when you have finished Press composing the message The submenu that appears gives the options of OK / Insert Media / User Msgs / Add Sig. For information on adding attachments, see Text Message Attachments on the next page Either browse the Phonebook to select the number to send the message to, or choose OK and enter the destination phone number. Press You will be asked Send Message Now? Press Messages As the message is sent the sending message animation will display. If Delivery Confirmation is enabled (see previous section) and the message is transmitted successfully, Send Message Success will appear. Sending Quick Note Messages Your phone comes with several common message expressions preinstalled. To send a Quick Note: 1 From Idle press , select Messages > Create > SMS/EMS. Press 2 Instead of writing the message content, press and select User Messages. A list of the saved Quick Notes will be displayed. 3 Select the desired Quick Note and press . 4 Enter the phone number and send in the same way as for a standard text message. Note: View your Quick Notes at any time by going to My Phone > Quick Note. You can also use this menu to compose new Quick Notes. 45 Messages Text Attachments When creating a text message, it is possible to include attachments (copyright permitting). To include an attachment: 1 Follow the instructions above to write the text message then press . When the OK / Insert Media / User Msgs / Select submenu appears (see step 4 above), select Insert Media. 2 Use to select the file to be inserted into the text body. Press Concatenated messages SMS messages can be made up text and attached pictures or icons to a maximum size of 160 characters. If you want to send a larger message, your phone will automatically configure your message as a sting of smaller messages and send these simultaneously. Concatenated messages such as this appear to a user as a single message. Receiving Text Messages When a Short Text Message is sent to your phone, the message Received 1 New Message and the message indicator ( ) will flash in the display with an alert signal (this signal - an audible tone or vibration - is set in the My Phone > Sound Settings menu). This indicates that a new message has been received. Note: If the message indicator shows red the message area is full and you will need to delete old messages in order to be able to receive new messages in the future. 46 Reading immediately Messages When Read is displayed press to read the message immediately. Use to navigate through the message and to identify the sender and the time the message was sent. With the phone number shown in the Sender to dial the phone number. field, press Reading later Received messages are stored in the Inbox. From Idle, press and select Messages > Inbox Use to select a message to read (if there is more than one) and press to view the message. You can call the sender, or press to view your other options (this submenu can also be viewed by when the message is pressing highlighted in the Inbox). Responding to Text Messages Press when you have read a message to view response options. Alternatively, highlight the message in the Inbox (Messages > Inbox) and press .Choose to: Reply to the message Call Back Forward the message Store the number Delete the message Delete All messages or Extract Media (if any file is attached to the message) 47 Messages Chat SMS The Chat feature enables you to read sent and received messages on one screen when in Chat SMS mode with another party. 1 Either: When reading a previously sent or received message, press and select Chat and/or enter your Nickname (up to 18 characters) - see Text Entry, page 84. Or: Launch Chat SMS mode from and selecting Idle by pressing Messages > Chat SMS > Start Chat. Enter your Nickname It is now possible to chat with the other party, providing they have the chat SMS facility on their phone. Enter your message - see Text Entry, page 64. Press and enter the destination phone number if necessary (or browse and select from Phonebook). When receiving a message in chat mode, the text will appear automatically above your previous message. 48 Press , select OK to continue the chat Messages If the phone is not in chat mode when receiving a reply to a chat message, the reply will be received as a normal SMS. If a voice call is received when in chat mode, the phone will allow the user to accept the incoming call and return to chat mode at the end of the call. Chat conversations are stored and can be viewed in the History folder. and To open the folder from Idle, press select Messages > Chat SMS > History. Regular Chat users should clear the history regularly to free memory space. MMS: Setting Up the Phone Multimedia Message Service (MMS) Configuration must be performed before you can send or receive an MMS message. You can create up to three server profiles on the phone. Note: Your MMS settings may have been pre-configured by your service provider. Contact your service provider if you are unclear how to proceed. 49 Messages MMS Configuration From Idle press , select Messages > Options > MMS > Server List. Press Select the server required and press Use to select Edit and press Select Bearer Type or WAP Setting and press to start configuring settings Note: Contact your service provider for advice on settings for MMS configuration. Note: Use the Messages > Options > MMS menu to configure other MMS settings. Contact your service provider for details of required settings. 50 Messages Creating an MMS Message Your phone supports MMS (Multimedia Messaging Service), which means you can send digital pictures to an MMS-enabled mobile or to an email address. Wherever you are, attach a photo, audio message or text, and send it immediately to your friends. The following basic steps must be followed for all MMS messages. For information on multimedia additions, read the following section. and select Messages > Create >MMS. Press 1 From Idle press Compose the text part of the message (see Text Entry, page 84, for details of entry methods) When the message is complete press To attach a media file, follow the instructions on the following page. To continue without attaching a media file, select OK from the submenu and press Select To:, press and enter (or browse and select) the recipient’s phone number or email address. to confirm Press If desired, a message can be delivered as a copy to another recipient. To do this, use to select Cc: . Press and enter (or browse and select) the copy recipient’s phone number or to confirm email address. Press A Bcc: address or phone number is added in the same way. Bcc delivery differs from Cc delivery in that the original recipient (whose address is in the To: field) will not be informed of any copies sent to Bcc addresses 51 Messages 8 When the To: field has been filled and any required Cc or Bcc entries have been added, add the message subject heading. Use to select Subj:, press and enter the subject heading. Press to confirm, then press 9 Use to select Send or Save as appropriate Note: Saved messages are stored in the Outbox and can be edited and sent in the future. Attaching Media Files Media files such as voice files can easily be added to MMS messages. 1 Compose a message following steps 1 to 3 on the previous page 2 From the submenu select Insert Media 3 Use to browse and select media files available on your phone 4 When you have selected files, press 5 Send or Save the message as instructed on the previous page 52 Messages Managing Message Lists Messages, whether sent or received, are mostly stored in the SIM card until they are deleted. Selecting a stored message allows it to be read, replied to, edited or deleted. Inbox Messages received are stored in the Inbox and tagged with icons: indicates an unread SMS message indicates an unread MMS message From the Inbox, select a message. Press to read the message or view other options: Reply to the message Call Back the sender Forward the message Store the sender’s number Delete the message Delete All messages from the Inbox Extract Media files from the message Edit the message content before forwarding or saving to 53 Messages Outbox Messages sent or edited are stored in the Outbox and tagged with icons: indicates an unsent SMS message indicates an unsent MMS message indicates an unsent EMS message Cell Broadcasts You need to specify the topic(s) of information you wish to receive as broadcasts before they can be received. , select Mes1 From Idle press sages > Broadcasts > Topics and press 2 Press twice to insert a new topic 3 Use to cycle through the available topics and select RX On from the 4 Press pop up menu 5 Press to insert the currently displayed topic into your broadcast list When a low priority broadcast has been received, will be displayed on the Idle screen. If a high priority broadcast is received, its text content will be displayed on the idle screen 54 Enabling/Disabling Cell Broadcasts Messages From Idle press , select Messages > Broadcasts and press Select Receive and press Use to select Enable or Disable and press Language The language in which broadcast messages are displayed can be changed ( ). Go to Messages > Broadcasts > Languages and press 55 Call Information Call Information This section explains how you can obtain more information about your calls, including: D Recent calls made, received and missed D Call duration D Call charges Recent Numbers Recently dialled phone numbers are stored in Last Dial. If Caller Identification is available, the caller’s phone number for an answered call will be stored in the Answered Call menu and an unanswered call will be stored in the Unanswered Call menu. If Caller Identification is not available then calls will still be stored but will have the date and time attributed to them. When the store is full the next phone number will overwrite the oldest. From Idle press Use Press Use to select the phone number (or name) you wish to redial. Press to select Last Dial, Answered Call or Unanswered Call. You can edit or delete the phone number before dialling – see Editing Phonebook Entries, page 18. If you wish to store the selected number in Phonebook, press while the number is displayed – see Storing a Number in the SIM /Mobile Phonebook, pages 15-16. 56 Calling the Last Dialled Number To redial your last called phone number press Call Information twice. Returning an Unanswered Call When the display shows that you have received calls but not answered them. 1 Press The last caller’s phone number will be displayed if it is available. 2 Use to select the phone number you wish to dial 3 Press Call Duration From Idle press , select (Applications >) Phone Option > Call Services > Calls. Press Note: The Calls feature is SIM dependent ( ). If the SIM does not support this function then items under Calls menu will be found directly under the Call Services menu. Use to select one of the features described below, and press Last Call displays the duration and call charge (if available) of the last call made. Times are indicated as: hours (0-99), minutes (0-59), seconds (0-59) - HH:MM:SS. All Calls displays the accumulated duration and call charge (if available) of Incoming and Outgoing calls. The lock code or PIN2 is required to reset the timer and call charge meter. 57 Call Information GPRS Call Duration From Idle press and select (Applications >) Phone Option > Call Services > Connections. Press Note: The Connections function is SIM dependent ( Use ). to select one of the features described below, and press Last Connection displays the amount of data transferred during the last call. All Connections displays the accumulated duration and amount of data transfer. The lock code or PIN2 is required to reset the timer. Call Charges To maintain control over the cost of calls that are made, the phone can be set to restrict use to a finite number of units overall ( ). 58 Call Information Setting the Unit Price Firstly, a price per unit must be entered. This is the cost that the Service Provider charges for one unit of call time ( ). , select 1 Fr o m I d l e p r e s s (Applications >) Phone Option > Call Services > Service Charges > Price Unit. Press 2 Press to edit the values At this point you will be asked to enter your PIN2 or Lock code. Do so and press . 3 Enter a currency unit (up to three characters) e.g. GBP. Press twice 4 Enter a price and press twice Setting the Maximum Unit Level This function allows the user to pre-determine the maximum cost of calls made ( ). 1 Fr o m I d l e p r e s s , select (Applications >) Phone Option > Call Services > Service Charges > Max Cost. Press 2 Press twice to edit the values At this point you will be asked to enter your PIN2 or lock code. Do so and press Enter a value (number of units) which is to be the maximum permitted, and the corresponding cost will be displayed Press twice to accept 59 Call Information Note: The duration of one unit may vary during the day, peak and off-peak times. Therefore, the call charge can be calculated accordingly. However, call charge information may not give an accurate reflection of the tariffs charged by your Service Provider. Call Identification In the Call Services > Calls menu, the Caller’s ID and Withhold ID functions allow you to check the status of whether a Caller’s Identification is sent or can be received (Withhold ID ). Note: When checking the status the phone must be registered with a network. 60 Advanced Operation Advanced Operation This section contains detailed information on call management including: D Call diversion D Call holding D Call waiting D Making and receiving a second call D Transferring calls D Multi-party calls D Changing network Diverting Calls Voice, fax and data calls can be diverted according to different conditions and to different numbers. For example you may wish voice calls to be diverted to Voicemail when the phone is switched off. To enable call diversion: and select 1 From Idle press (Applications >) Phone Option > Call Divert. Press 2 Use to select the type of call to divert (you can repeat this step as necessary). Press 3 If diverting voice calls, use to select circumstances in which to initiate the diversion. Press 4 Enable the diversion by selecting On from the Status menu. Press 5 Enter the phone number to divert to (or press and select the number from your Phonebook). Press 61 Advanced Operation Note: To edit a call diversion setting, follow the steps above and reset according to the new settings. Note:To cancel a diversion setting, select Off in step 4 above. To cancel all diversion settings, go to (Applications >) Phone Option > Call Divert > Cancel All. When a diversion is enabled the divert icon ( ) is displayed. When updating or checking the status of Call Divert the phone must be registered with a network ( ). Holding Calls and Call Waiting Holding a Call During a call press . Alternatively: 1 Press 2 Use to select Hold Active. Press Resuming a Call Press Use to select Resume . Press Making a Second Call During an ongoing call, enter phone number (or recall from Phonebooks – see Browsing the Phonebooks) Press The first call will be placed on hold. 62 Advanced Operation Receiving a Second Call A second call can be received, if Call Waiting is switched on. This is enabled from the (Applications >) Phone Option > Call Services > Calls menu. It is not possible to have more than one fax or data call. All voice calls must be ended before you can make or receive a fax or data call ( ). Accepting a Second Call Press when the second call is received Use to select Accept. Press The current call will be placed on hold. Rejecting a Second Call Press when the second call is received Use to select Reject. Press Ending Current Call to Receive Another Press when the second call is received to end the current call or to receive the new call Press any key except Operation During Two Calls Swapping Between Calls Press Use select Swap. Press Ending Current Call Press Use to select End. Press The held call will remain held. Ending Both Calls Press 63 Advanced Operation Call Transfer With two calls connected, Call Transfer enables the user to connect them together ending your connection, leaving the other parties to talk together ( ). When two calls are connected to your phone: 1 Press 2 Use e to select Trans. Press The two calls will be connected to each other and your call will be ended. Note: Two call transfer cannot be activated while in Multi-party mode. Multi-party Calls A Multi-party call enables three to five people to be in conversation at the same time. It is possible to swap between a Multi-party call and another call in the same way as with two separate calls ( ). Enabling Multi-party With two calls connected (one active, one on hold): 1 Press 2 Use to select Merge. Press All three parties should now be able to talk to each other. Adding to Multi-party It is possible to add parties to the Multi-party call (up to a maximum of five) either by making a call or accepting an incoming call. The call can then be merged into the Multi-party. Note: When making a call or accepting an incoming call the Multiparty call will be placed on hold. The callers in the Multi-party call can continue to communicate with each other while on hold. 64 Splitting a Multi-party Call Advanced Operation The user can select an individual from the Multi-party and remove their connection. This enables you to talk privately without the participation of the rest of the Multi-party. during a Multi-party call 1 Press 2 Use to select Option. Press 3 Use to select a caller in the Multi-party 4 Press 5 Use to select Split. Press The selected caller will be split from the Multi-party call and the Multiparty call will be placed on hold (the remaining Multi-party callers can still communicate). Ending Multi-party Calls The user can either select an individual in the Multi-party and end the call or end the entire Multi-party call. If a call is held, or an other call is incoming then an individual call cannot be ended. Ending a Single Connection During a Multi-party call: 1 Press 2 Use to select Option. Press 3 Use to select a caller in the Multi-party 4 Press 5 Use e to select End. Press Ending all Connections During a Multi-party call: to end all the calls at once Press 65 Advanced Operation Changing to a New Network When not in your home country / region, the user may use a network that is not directly subscribed to. This is called ROAMING. Legal restrictions may not permit roaming in your home region. The New Network function is used to manually select a network that is available in your current location. , select 1 Fr o m I d l e p r e s s (Applications >) Phone Option > Network > New Network. Press Your phone will search for available networks Use to select one from the list of available networks. Press If you cannot register with the selected network, that network will be greyed out. When the Search Mode is set to Automatic the phone will automatically reselect a new network in order to maintain optimum network availability. With the Search Mode set to Manual the phone will only use a selected network. If coverage is lost another network should be selected. 66 Schedule Schedule The Scheduler can be used to register reminders for personal events as well as planning holiday periods. Caution: Ensure that any settings made in the Scheduler will not contravene any regulations whereby the phone may automatically power on when in an aircraft or medical facility etc. - see Important Infor mation, page i. Creating a Reminder From Idle, press , select Scheduler and press again. Select [New Event] and press to create a new schedule event. Use the Navigation key ( ) to select the date for your reminder. First move the cursor to the year entry and use to adjust the entry if necessary. Use in the same way to adjust the month entry. to place the cursor over the appropriate date entry. Press Use to select the date Enter the time for the reminder. Use the numbered keys to enter the correct time (using the 24-hour clock) or use to adjust the time displayed. Move between the hour and minute fields using When the time is entered correctly, to confirm press Enter a name to identify this schedule entry 67 Schedule Viewing & Editing Reminders Open the Scheduler menu. All scheduled reminders are listed. Use highlight the reminder you wish to view and press name of the reminder will be displayed. Press 68 to . The time, data and to edit the details. Games Games Embedded Games To enter the embedded games menu: From Idle, press and select Games. Use and press to select a game to launch. Follow the prompts in the pop up menu for playing instructions and game options Downloadable Games The downloadable games menu enables you to use one factory embedded game and download another game from the games catalogue. To enter the Downloadable games menu: and select Applications > Games. Use From Idle, press select a game and press to to launch. Note: A downloaded game will overwrite the previously downloaded game. Follow the on-screen instructions to play the game. The game catalogue is renewed regularly and updates automatically when a game is downloaded. 69 Games Game Settings Use the Applications > Games menu to set your game nickname and set sound, backlight and vibration levels for gameplay. 70 From Idle, press , select Applications > Games > Setting To enter a Nickname press . Enter the name and then press to confirm Use to select Sound. Press Sound can be set to Off, Low, Medium or High. Use to select to confirm the desired setting and then press Use to select Vibrations. Press Vibration can be set to Off or On. Use to select the desired to confirm setting and then press Use to select Back light. Press The back light can be set to Off, On 30s (on for 30 seconds) or Always on. Use to select the desired setting and then press to confirm Managing Multimedia Files Managing Multimedia Files The multimedia files saved in G60U are located in the Media Folder (My Phone > Media Folder). There are four predefined folders (Picture, Animation, Melody and Memory Status). Note: Changing SIM does not affect the contents of stored data. Displaying Pictures and Animations From Idle, press , select My Phone > Media Folder > Pictures / Animation. Press Use Select View. Press to select a file to display. Press Note: The phone cannot display a file that is not in one of the supported formats. 71 Managing Multimedia Files Playing Melodies From Idle, press and select My Phone > Media Folder > Melody. Press Use to select a file to play. Press to view Note: You can compose your own melodies and ringtones. Turn to Composing a Melody in Personalising Your Phone for full instructions. Note: You cannot edit polyphonic ring tones, music files or files that cannot be forwarded or saved. Renaming Files From Idle, press , select My Phone > Media Folder and open the subfolder for the file you wish to rename. Press Use to select the file to rename. Press Select Rename. Press Note: Do not use special characters in the new name. 72 Managing Multimedia Files Creating Mail from Files You can jump in one step from a file to the create mail screen with the file as an attachment. The phone will display the ‘Create Mail’ screen. Note: You cannot copy a file that cannot be forwarded or saved; You can press to select Create Mail while the file is displayed. Deleting Files From Idle, press , select My Phone > Media Folder and open the subfolder for the file you wish to delete. Press Use to select the file to delete. Press Select Delete. Press Checking File Properties You can view the file name, date, file size, whether the file can be forwarded and whether it can be saved. 1 From Idle, press , select My Phone > Media Folder and open the subfolder for the file you wish to check. Press 2 Use to select the file. Press 3 Select Property. Press Note: If there is not enough memory capacity in the folder when you try to save a file, the phone will display Folder is Full. Delete Data? to keep file or to delete file. Press 73 Managing Multimedia Files Checking Folder Properties To check the status of the Media Folder, from Idle, press , select My Phone > Media Folder > Memory Status. Press . A graphic display of free space in the folder will be displayed. 74 WAP Browser WAP Browser Your phone’s WAP (Wireless Application Protocol) Browser enables the user to access Internet services supported by the network, such as news, weather reports and sport. Browser Settings Before Internet services can be accessed, the SIM must be data enabled and the relevant configuration information, entered into the phone. Note: The configuration information may have been pre-programmed by your service provider. Modifying these settings may cause failure of the Browser. From Idle press , select Browser > Browser Setting > Set Profile. Use to select a browser profile (you can configure up to five browser profiles). Press Select Edit. Press Select WAP Setting. Press 75 WAP Browser A list of configuration parameters will be displayed. Select each parameter in turn and enter the appropriate values (contact your service provider for details if necessary). For each browser profile, set also the Bearer Type. Go to Browser > Browser Setting > Set Profile > [Select Profile] > Edit > Bearer Type. To configure a GPRS browser, enter User Name, Password and Apn (Access Point Name). To configure a CSD browser, enter User Name, Password, Phone Number, Line Type and Transfer Rate. Note: Contact your service provider for setup values if you are unsure. 76 WAP Browser Record your WAP settings in the table at the rear of this booklet for easy reference. When you have entered settings for a browser profile, you may wish to rename the profile to make it easier to remember. To rename a profile, go to Browser > Browser Setting > Set Profile > [Select Profile] > Rename. The current profile name will be displayed. Edit this name to rename the profile. Since you can set up to five profiles, you should also select which is your active profile. To do so, go to Browser > Browser Setting > Set Profile > [Select Profile] > Set As Active. Press 77 WAP Browser Activating the Browser To activate the Browser, either: From Idle, press and select Browser > Start Browser. Press The first time that the browser is activated there will be no content. Each time the browser is activated, the last page viewed from the previous WAP session will be recalled. At the start of a WAP session, the browser content may be retrieved from the cache (cache is the phone’s memory that stores content downloaded in the past). At this stage the user will remain off line. When data is required from the WAP server, the user will be prompted to Start data call? If Yes is selected, the phone will go on line and the browser will go to the home page. Navigating Content Use the Navigation key ( ) to scroll through the content on the screen as follows: Use to scroll up/down on the current page Use to return to the previous object/page Use to return to the next selectable object/page When linked text (underlined text) is highlighted, press page represented by the link. 78 to load the WAP Browser Browser Menu The Browser contains its own menu which is applicable when content is currently being displayed (either on-line or off-line). This menu is used as follows: Back Returns the user to the Browser Start Up menu Home Displays the Home URL content as defined by the network operator Exit Deactivates the Browser Bookmarks Use, view, add and delete bookmarks Go To URL Enter URL to open Save Items To save images or other items from the current page Snapshots Take a snapshot of the current page Show URL Display the current URL Reload Reload and update the current page 79 WAP Browser Settings Allows the user to select and set: Homepage URL Download parameters (enable or disable the downloading of multimedia files) Restart Browser Security submenu About Provides information about the type of browser and security options 80 WAP Browser Using Bookmarks Frequently accessed pages may be bookmarked to save time - you won’t have to enter the URL each time you want to visit the page. Adding a Bookmark While viewing the page, press Use to select Bookmark Use to select either Title or URL as the Bookmark name Recalling Pages Using Bookmarks Select Bookmarks from the Browser menu. Select View and use highlight the bookmark you want. Press . to Renaming a Bookmark Select Bookmarks from the Browser menu. Select View and use highlight the bookmark you want. Press and select Edit. to Deleting Bookmarks Select Bookmarks from the Browser menu. Select View and use highlight the bookmark you want. Press and select Delete. to 81 WAP Browser Deactivating the Browser The Browser can be deactivated as follows: When browsing on-line, press to review cache off line. When browsing off-line, press to return to Idle mode. 82 Additional Features Additional Features Voice Memo You can record a two-way conversation during a call and use the phone as a dictaphone. The maximum length of a recording is 16 seconds. Old recordings are overwritten; only one recording can be stored. Note: If a different SIM is installed any voice memos will be lost. Caution: Security of a recorded message is your responsibility. You MUST ask for the other party’s consent before recording. Record a Voice Memo From Idle, press and select Applications > Record. Press The recording will stop automatically after 16 seconds. Recording a Call During a call, press . Use to select Memo Press A tone will sound when recording starts. When the recording stops a tone will sound. If you press while recording a call, recording will stop but no tone will sound to either party. 83 Additional Features Play Back a Voice Memo From Idle, press and select Applications > Voice Memo Play > Playback. Press . To stop playing, press Volume Control During Playback While playing back use to adjust the volume of the voice memo. Delete a Memo From Idle, press and select Applications > Voice Memo Play > Delete. Press 84 Additional Features DTMF Tones Dual Tone Multi-Frequency Tones (DTMF) tones can be sent during conversation. These are often used to access voice mail, paging and computerised home banking services. For example, you may need to input a number to remotely access voice mail messages. A phone number may be stored in the Phonebook with DTMF tones, allowing the number to be dialled upon recall and the DTMF number to be sent automatically. Sending DTMF Tones During a Call Simply enter digits ( to and ) during the call. Pause Dial Pause Dialling allows you to send DTMF tones automatically. 1 Enter phone number 2 Press and hold until a p is displayed at the end of the phone number entered 3 Enter DTMF digits after the pause, e.g. enter the number to access voice mail messages. 4 Press When the call is successful DTMF tones will be sent after 3 seconds or to send the DTMF tones manually. press Note Pad During a call numbers can be entered which you may wish to dial when the call has ended. During a call: 1 Enter phone number 2 When the call has ended press to call that number To store the number in Phonebook, press while the number is displayed – see the instruction on storing numbers in the section Phonebook. 85 Additional Features Desktop Handsfree Desktop Handsfree enables you to hold a conversation without having to hold the phone to your ear. Note: Do NOT hold the phone to your ear in Handsfree mode. Swapping Between Handsfree and Handheld Calls During a Handheld call: 1 Press 2 Use to select Handsfree. Press During a Handsfree call: twice to revert for Handheld operation Press Answering a Call Handsfree: To answer a call using Handsfree, press and hold Auto Answer When Auto Answer is switched on, and Personal Handsfree or a head set or car kit is connected, a call will be answered without pressing any keys. Any call waiting should be answered in the normal way. To enable Auto Answer, from Idle, press Auto Answer. Choose Enable and press and select My Phone > Note: Take care when Auto Answer is selected to ensure unauthorised listeners cannot overhear your phone conversations. 86 Camera Accessory Camera Accessory With the Panasonic camera accessory attached to your phone, you can take photos then save them or send them immediately in a MMS message. The camera accessory slots onto the accessory connector on the base of your phone. When the camera accessory is plugged in, the main menu changes. The Key Guard icon is replaced by a Camera icon as shown. Select Camera for all related functions. Taking a picture To take a picture, first ensure the camera accessory is plugged in. Then: 1 From Idle, press and select Camera. Press 2 Position the camera to frame the desired photo to zoom in, Use to zoom out and to turn on the photo light to capture the photo When you are ready, press 3 The captured photo will be displayed. Press to store the photo to immediately attach the photo to a in your Media Folder or new MMS message ready for sending (see Messaging for details of how to compose and send MMS messages). Press to delete the photo instead. 87 Camera Accessory Camera Options To take a picture, first ensure the camera accessory is plugged in. Then: and select Camera. Press 1 From Idle, press 2 Press to open the Options menu. Select from the following options: Photo Resolution ± 240), QQVGA Choose from VGA (640± ± 480), QVGA (320± ± 120) or Screen Size (128± ± 96). (160± Note: Higher resolution pictures are of better quality but occupy a larger share of your phone’s memory. If you want to take several high resolution pictures, consider reducing the amount of memory taken up by other types of media file such as ring tones and downloaded games. Photo Light Turn the built-in photo light On or Off. Self Timer Turn the Self Timer On or Off. When the Self Timer is turned on, there is a delay after the capture button is pressed before the photo is taken. Shutter Sound Select from three available shutter sounds. 88 Text Entry Text Entry The phone provides a means for entering alphanumeric characters to enter details into the Phonebook, to create text etc. This section details the characters that can be entered and the relevant keys to press. Press once to enter a single capital letter (subsequent characters will be lower case). Pressing twice acts as a keyboard CAPS LOCK function and subsequent characters will be uppercase. Press third time to return to lowercase character entry. to return to the message screen. Press 89 Text Entry T9® Text Input Using this mode of text entry dramatically reduces the number of key presses required: Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue pressing other keys until the end of a word is reached; then check that the word has been typed correctly before continuing on to the next word. If the combination of letters typed has produced a word which is not the repeatedly until the correct word is displayed. one you require, press Continue to the next word. If the word you require is not in the internal dictionary (i.e. it is a proper noun or a rarely used word) then it should be entered using the Normal ) mode. Other Text Modes To access any of the other text entry modes use to cycle through until the desired mode is displayed in the left side of the display. When using Normal ( ), Greek ( ) or Extended ( ) text entry modes, each time a key is pressed in quick succession it will display the next character available on that key. Releasing the key, or pressing another key will enter the currently displayed character and the cursor will move to the next position. Editing Text Pressing will move you up or down one text line. Pressing will move you left or right one character. When the cursor is moved over a character and another key pressed this will insert the new will character immediately before the selected character. Pressing delete the character to the left of the cursor or delete the current line when pressed and held. 90 Trouble Shooting Trouble Shooting Should any problem persist contact your dealer. Problem Phone will not switch on Extremely short battery life for a new battery Short battery life for an old battery The charging indicator does not light, the battery level indicator does not appear and the phone cannot be switched on when charging Battery fails to charge Cause Remedy Check that the battery is fully charged and correctly connected to the phone The network you are using and the condition of the battery can affect battery life The battery has worn Replace with a new fully out charged battery The battery is not Leave the phone charging attached to the phone the battery for a few or when the battery has minutes before the been deeply discharged indicator is lit and the phone will take a attempting to switch it on short time until the indicator lights The battery is not attached to the phone Ensure the battery is Battery has been connected to the phone fitted to the phone prior after the Fast Travel to commencing charging. Charger has been switched on 91 Trouble Shooting Calls cannot be made The phone is locked Outgoing calls are barred The phone is not registered to a network Calls cannot be made from Fixed Dial Store Calls cannot be received The phone is not switched on Incoming calls are barred The phone is not registered to a network Emergency calls cannot be made You are not in a GSM coverage area Phone numbers cannot be recalled from Phonebook The phone is locked Phone number has been restricted 92 Unlock the phone Disable the outgoing call barring, or barred dial Move to a coverage area and operate your phone after it has registered with a network. Check your SIM supports Fixed Dial Check if the Fixed Dial is switched on Check the phone number is stored in the Fixed Dial Switch the phone on Disable the incoming call barring Move to a coverage area and operate your phone after it has registered with a network. Check that the antenna symbol S is displayed move to a coverage area and operate your phone when the antenna symbol is displayed Unlock the phone Switch off restriction Trouble Shooting Important Error Messages These are some of the most important error messages which may be displayed: Roaming in the selected area is not allowed Area Not Allowed Network Not Roaming with the selected network is not allowed Allowed Security Failure The network has detected an authentication failure because your SIM is not registered with that network - contact your Service Provider The SIM is blocked because one of the PIN/PIN2 SIM Blocked / unblocking keys (PUK/PUK2) has been entered Contact Service provider incorrectly ten times - contact your Service Provider SIM Error The phone has detected a problem with the SIM switch the phone off and then back on; if the message is still displayed contact your Service Provider The SIM has failed one or more of the SIM SIM Invalid personalisation checks - contact your Service Provider Function The selected feature is either not supported by the Unavailable SIM or is not available with the current subscription contact your Service Provider PIN2 Invalidated The PIN2 is blocked permanently because the wrong PUK2 has been entered ten times, services controlled by PIN2 cannot be used - contact your Service Provider Message A message has been received but the message store Rejected Store is full - to receive messages, delete some of the Full currently stored messages or set messages to Auto Delete Phone Number The edited or newly created Phonebook number is too long for the SIM Too Long (Max:20) Warning Store The message area is full. Your messages cannot be Full Continue ? stored until some of the currently stored messages are deleted 93 Trouble Shooting Verification On changing the phone lock code, verification of the Failure new code is incorrect - retry changing the lock code with correct verification Incorrect Lock Disabling or enabling the lock code has failed due to Code incorrect entry of the lock code - re-enter lock code Incorrect PIN / The entered code is incorrect - re-enter code PIN2 / PUK / correctly PUK2 Auto Redial List Redial list of unsuccessfully dialled numbers is full switch the phone off and then on again 94 Glossary of Terms Glossary of Terms Access Point Name. Directs the user to the gateway or the required service. Cut Permanently removes selected text from short text message Copy Copies selected text from short text message without removing it from the original message CHAP Challenge Handshake Authentication Protocol. A security feature for the GPRS network. DTMF Tones Dual Tone Multi-Frequency tones allow you to communicate with computerised phone systems, voice mailboxes etc. EMS Enhanced Message Service. Upgraded feature of Text Messages GPRS General Packet Radio Service. The Technology the phone uses. Global System for Mobile Communications. The GSM name given to the advanced digital technology that your phone uses. The organization responsible for operating a GSM Network Operator network. PAP Password Authentication Protocol. A security feature for the GPRS network. Used for the control of the Call Bar. Supplied by your Password Service Provider. Personal Identification Number used for SIM security. PIN Supplied by your Service Provider. If the PIN is entered incorrectly 3 times, the PIN will be blocked. PIN2 Personal Identification Number used for the control of Fixed Dial Store and Call Charge metering. Supplied by your Service Provider. If the PIN2 is entered incorrectly 3 times, the PIN2 will be blocked. APN 95 Glossary of Terms PUK/PUK2 PIN/PIN2 Unblocking Key. Used to unblock the PIN/ PIN2. Supplied by your Service Provider. If the PUK/ PUK2 is entered incorrectly 10 times, the PUK/PUK2 will be blocked. Registration The act of locking on to a GSM/GPRS network. This is usually performed automatically by your phone. Roaming The ability to use your phone on networks other than your Home network. Service The organization responsible for providing access to Provider the GSM/GPRS network. SIM Subscriber Identity Module. A small smart-card which stores unique subscriber and user-entered information such as Phonebook and Short Messages. Supplied by your Service Provider. WAP Wireless Application Protocol. The communication standard which enables you to download resources from the Internet to your phone 96 Specifications Phone (Including Battery) Type GSM850 GSM1900 GPRS Class 8 Temperature Range Charging +5ºC - +43ºC Storage -20ºC - +60ºC Weight 85g Dimensions (mm) Height x Width x Depth 104 x 47 x 19.15 Supply Voltage 3.7V DC, 740mAh Standby Time (hrs) 200 (approx.) Talk Time (hrs) 2.5 (approx.) Charge Time (Phone off) Up to 120m Antenna Internal SIM Type 1.8V/3V Phonebook Memory 200 + SIM Animation Themes Voice Memo 1 x 16 seconds Ring tones 20 fixed Scheduler Up to 10 Entries Alarms Note: Charge time will be longer when the phone is turned on. Battery life is affected by the network being used and the condition of the battery. Talk and standby time will be dependant upon network conditions, SIM, back light usage and battery condition. EU Warranty EU Warranty EU/EEA - Wide guarantee is applicable in the EU/EEA and Switzerland. Panasonic GSM European Service Guarantee Conditions Dear Customer, Thank you for buying this Panasonic digital cellular telephone. The Panasonic GSM European Service Guarantee only applies while traveling in countries other than where the product was purchased. Your local guarantee is applicable in all other cases. If your Panasonic GSM telephone requires service while abroad, please contact the local service company shown on this document. The Guarantee The applicable period of the European wide guarantee for GSM is generally 12 months for the main body and 3 months for the rechargeable battery. With respect to a product used in a country other than a country of purchase, notwithstanding what is stated in the conditions below, the customer will benefit, in that country of use, from these guarantee periods of, respectively, 12 and 3 months, if these conditions are more favorable to him than the local guarantee conditions applicable in such country of use. Conditions of Guarantee When requesting guarantee service the purchaser should present the warranty card together with proof of purchase, to an authorized service centre. The guarantee covers breakdowns due to manufacturing or design faults; it does not apply to other events such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorized by us. Your sole and exclusive remedy under this guarantee against us is the repair, or at our option the replacement, of the product, or any defective part or parts. No other remedy, including, but not limited to, incidental or consequential damage or loss of whatsoever nature shall be available to the purchaser. This is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. This guarantee applies in countries shown on this document at the authorized service centres detailed for that country. 98 EU Warranty UK Service Centres in England Tel. +44 (0) 8705 159159 IRL Service Centres in Ireland Tel: +353 (0) 1 2898333 Panasonic Service Center Dresden SERKO GmbH Großenhainer Straße 163 01129 Dresden Tel. +49 (0)351/ 85 88 477 Panasonic Service Center Cottbus Petsch Kundendienst GmbH Am Seegraben 21 03058 Gross-Gaglow Tel. +49 (0)355/ 58 36 36 Panasonic Service Center Leipzig KES Keilitz-Electronic-Service GmbH Föpplstraße 19 04347 Leipzig Tel. +49 (0)341/ 244 33 33 Panasonic Service Center ChemnitF WPS Rundfunk- u. Fernsehservice GmbH Fietenstraße 16 09130 ChemnitF Tel. +49 (0)371/ 40 10 359 Panasonic Service Center Berlin SERKO GmbH Schwedter Straße 34a 10435 Berlin Tel. +49 (0)30/ 44 30 3221 Panasonic Service Center Berlin RUESS SYSTEMS Thrasoltstraße 11 10585 Berlin Tel. +49 (0)30/ 342 2013 Panasonic Service Center Rostock warnow electronic service gmbh An der Jägerbäk 2 18069 Rostock Tel. +49 (0)381/ 82 016 Panasonic Service Center Hamburg ELVICE Service GmbH Spaldingstraße 74 20097 Hamburg Tel. +49 (0)40/ 23 08 07 Panasonic Service Center Rendsburg FERNSEH-DIENST B&W Service GmbH Kieler Straße 41 24678 Rendsburg Tel. +49 (0)4331/ 14 11-0 Panasonic Service Center Bremen COM Elektronik Service GmbH Rübekamp 50 28219 Bremen Tel. +49 (0)421/ 691 80 69 Panasonic Service Center Hannover COM Elektronik Service GmbH Vahrenwalder Straße 311 30179 Hannover Tel. +49 (0)511/ 37 27 91 Panasonic Service Center Magdeburg SERKO GmbH Ebendorfer Chaussee 47 39128 Magdeburg Tel. +49 (0)391/ 289 90 69 Panasonic Service Center Düsseldorf VTH GmbH Kölner Straße 147 40227 Düsseldorf Tel. +49 (0)211/ 77 90 25 Panasonic Service Center Essen Bernd van Bevern GmbH Heinrich-Held-Straße 16 45133 Essen Tel. +49 (0)201/ 84 20 220 Panasonic Service Center Osnabrück Petsch Kundendienst GmbH Pagenstecherstraße 75 49090 Osnabrück Tel. +49 (0) 541/ 68 038 Panasonic Service Center Wiesbaden J. Hemmerling - VAD GmbH Ostring 7 65205 Wiesbaden Tel. +49 (0)6122/ 90 91 10 Panasonic Service Center Mannheim N. Schaaf Reichenbachstraße 21-23 68309 Mannheim Tel. +49 (0)621/ 72 787-0 Panasonic Service Center Stuttgart Hans Beck Friedrich-List-Straße 38 70771 Leinfelden-Echterdingen Tel. +49 (0) 711/ 94 701-0 99 EU Warranty Panasonic Service Center Reutlingen Herbert Geissler Lichtensteinstraße 75 72770 Reutlingen Tel. +49 (0)7072 / 92 96-0 Panasonic Service Center München G.Berghofer & W.Kaller GmbH Helene-Wessel-Bogen 7 80939 München Tel. +49 (0)89/ 318 907-0 Panasonic Service Center Augsburg Klaus Bienek Affinger Straße 4 86167 Augsburg Tel. +49 (0)821/ 70 70 75 Panasonic Service Center Nürnberg Herbert Geissler GmbH Friedrich-Ebert-Straße 21 90537 Feucht Tel. +49 (0)9128/ 70 67-0 Panasonic Service Center Eisenach Blitz Electro-Electronic-GmbH Bahnhofstraße 17 99817 Eisenach Tel. +49 (0)3691/ 29 29 42 8 Service-Fentren in Österreich Funk Fuchs GmbH & CoKg Unterhart 90 4642 Sattledt Tel. +43 7244 733 Funktechnik Seissl Dorf 79 6330 Schwoich Tel. +43 5372 8217 Electro Oberndorfer Linzer Straße 2-4 4840 Vöcklabruck Tel. +43 6772 72889 Pa n a s o n i c A u s t r i a H a n d e l s g e s . m b H Laxenburger Straße 252 1232 Wien Tel. +43 222/61080 FR CETELEC FI de la Delorme 5 Avenue Paul héroult 13015 MARSEILLE Tél. : 04 96 15 77 77 100 Tél. : 04 91 58 07 55 CORDON Electronique BP 460 FI Taden 22107 DINAN CEDEX Tél. : 02.96.85.82.20 Fax : 02.96.85.82.21 EASY REPAIR 26 rue des Cosmonautes 31400 Toulouse Tél. : 05.62.71.48.14 Fax : 05.62.71.48.15 EASY REPAIR 22 boulevard des Brotteaux 69006 Lyon Tél. : 04.72.83.02.02 Fax : 04.78.52.40.38 ELECTRONIQUE SERVICE Avenue Figuières FAC Font de la Banquière 34970 LATTES Tél. : 04.67.15.96.30 Fax : 04.67.20.04.72 GENERAL ELECTRONIQUE 16 rue Joseph Cugnot F.I. Bracheux 60000 BEAUVAIS Tél. : 03.44.89.79.00 Fax : 03.44.05.16.96 Négoce Technique etMaintenance 40 boulevard Bessières 75017 PARIS Tél. : 01.44.85.21.66 Fax : 01.42.29.60.05 S.B.E. F.I. de la Liane BP 9 62360 SAINT LEONARD Tél. : 03.21.10.10.21 Fax : 03.21.80.20.10 NL Service-centra in Nederlands Panasonic-Centre Nederland (Servicom bv) P.O Box 16280 2500 BG Den-Haag Nederland Tel. +31 703314314 EU Warranty Fonweg 60 2516 BM Den-Haag Nederland Tel. +31 703314314 Per I Centri Assisitenza in Italia Servizio Clienti Tel. +39 02/ 67072556 Panasonic España, S.A. Servicio de Atención a Usuarios: Tel: 902 15 30 60 DK For nærmeste servicecenter ring Panasonic Danmark Tel. +45 43 20 08 50 Firmor I Sverige Komrep Rosenlundsgatan 4 411 20 Göteborg Tel. +46 031-173354 Signalstyrkan Kungsholmstorg 4 104 22 Stockholm Tel. +46 08-6542500 CR service Industribyn 3 232 37 Malmö Tel. +46 040-430030 MEGAFIX KY Louhenkatu 9 74100 Iisalmi Puh. +358 017 14631 T: MI.M.HAAPOJA Miilukatu 7 40320 Jyväskylä Puh. +358 014 677121 OUTOKUMMUN PUHELIN Pohjoisahonkatu 9 83500 Outokumpu Puh. +358 013 562211 SETELE OY Rengastie 31 60100 Seinäjoki Puh. +358 06 4148344 TURUN J-MARKKINAT OY Tuureporinkatu 6 20100 Turku Puh. + 358 02 2332685 Servicesenter I Norge Norsk Elektronikksenter Fetveien 1 2007 Kjeller Tlf: +47 63 80 45 00 Panasonic Norge AS Østre Aker vei 22 0508 Oslo Tlf: +47 22 91 68 00 GR SF Huoltokeskukset Suomessa: KAUKOMARKKINAT OY PANASONIC-HUOLLOT Kutojantie 4 02630 Espoo Puh. +358 09 521 5151 Huolto Puh. +358 09 521 5155 Varaosat Ja Tarvikkeet SETELE OY Vanha Viertotie 7 00300 Helsinki Puh. +358 09 549100 PLAY-SHOP SERVICE Keskuskatu 3 00100 Helsinki Puh. +358 09 27053626 Centros de Assistência em Portugal PAPELACO, S.A. Vale Paraiso - Ferreiras 8200 ALBUFEIRA ALGARVE Tel. +351 89 589960 PAPELACO, S.A. Largo de Santos, 9 1200 LISBOA 101 EU Warranty Tel. +351 1 3970539 PAPELACO, S.A. Largo do Tribunal, Lote 11 2400 LEIRIA Tel. +351 44 28071 PAPELACO, S.A. Rua Cidade de Santos, 31R/C 9000 FUNCHAL MADEIRA Tel. +351 91 231523 PAPELACO, S.A. Rua do Outeiro, Lote 25 - Gemunde 4470 MAIA PORTO Tel. +351 2 944 0354/9 PAPELACO, S.A. Rua Major Leopoldo da Silva, Lote 3 3500 VISEU Tel. +351 32 424771 Centres de service après-vente en Belgique BROOTHAERS Hoevelei 167 2630 AARTSELAAR Tel. +32 03/887 06 24 HENROTTE Rue du Campinaire 154 6240 FARCIENNES Tel. +32 071/39 62 90 PIXEL VIDEOTECH Rue St Remy 7 4000 LIEGE Tel. +32 041/23 46 26 DELTA ELECTRONICS Rue P.d’Alouette 39 5100 NANINNE Tel. +32 081/40 21 67 ELEKSERVICE FEYS Houthulstseweg 56 8920 POELKAPELLE Tel. + 32 057/48 96 37 AVS WAASLAND Lavendelstraat 113 9100 ST NIKLAAS Tel. +32 03/777 99 64 A.V.T.C SA Kleine Winkellaan 54 1853 STROMBEEK-BEVER Tel. + 32 02/267 40 19 RADIO RESEARCH 102 Rue des Carmélites 123 1180 BRUXELLES Tel. +32 02/345 68 56 VIDEO TECHNICAL SERVICE Av. du Roi Albert 207 1080 BRUXELLES Tel. +32 02/465 33 10 SERVICE CENTER Kapellestraat 95 9800 DEINFE Tel. +32 09/386 67 67 TOP SERVICE Westerloseweg 10 2440 GEEL Tel. +32 014/54 67 24 TELECTRO SC Quai des Ardennes 50 4020 Liège Tel. +32 041/43 29 04 Centres de service après-vente au Luxembourg NOUVELLE CENTRAL RADIO Rue des Jones 15 L - 1818 Howald Luxembourg - Grand Duché Tel. +32 40 40 78 CH Jonh Lay Electronics AG Littauerboden 6014 Littau Phone: +41 41 259 9090 Fax: +41 41 252 0202 TR EU Warranty 103 Personal Settings Personal Settings Use the table below to record your GSM/GPRS WAP settings. Item Name Home URL Gateway IP Primary IP Secondary IP Primary Port Secondary Port CSD GPRS Line Type Digital Dial # Analogue Dial # User Name Password Transfer Rate GPRS Access Point Name User Name User Password Authentication 104 Hint Analogue / ISDN Normal/Encrypted/ None (PAP) (Chap) Current Setting Options >> Copy Entries >> My Numbers >> Defaults Hot Key Dial List Voicemail Fixed Dial >> Service Dial >> Info Numbers >> Broadcasts Review >> Auto Answer >> >> Indicates there are further submenus Chat SMS Create Outbox Group Setting >> Browser Setting >> Media Folder >> Black Jack Inbox Create >> Start Browser 8. Scheduler Phone Option >> Edit Ringtone >> Calculator Clock Function >> Record Voice Memo Play Games 9. Applications From Idle press to display the main menu. To select a menu, use to navigate to the icon of the menu you require and press when the icon is highlighted. To exit the current menu and return to the previous level, press . To exit the menu structure, press and hold During a call a restricted menu will be available. 7. SIM Dependent 6. Messages Display Settings >> PinBall 4. Browser 5. Key Guard Browse >> 2. Phone Book 3. Games Sound Settings >> Language >> 1. My Phone IDLE SCREEN Menu Structure Menu Structure 105 Note Note 106 Licensing Licensing Tegic T9® is a trademark of Tegic Communications Inc.T9® Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953, 541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No.HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and additional patents are pending worldwide. © Matsushita Mobile Communications Development of Europe Ltd 2003 Information in this document is subject to change without notice. No part of these instructions may be reproduced or transmitted in any form or by any means without obtaining express permission from Matsushita Mobile Communications Development of Europe Ltd 107 Licensing 108 The Serial Number can be found on the outside of the phone under the battery. For your convenience we recommend that you note the following details as a record of your purchase. Part Number Serial Number Dealer Name Purchase Date Matsushita Communication Industrial Corporation of the Philippines Laguna Technopark Sta. Rosa, Laguna, Philippines Printed in Philippines 08.07.02
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:03:26 02:14:50Z Modify Date : 2003:05:19 15:03:03+08:00 Page Count : 124 Creation Date : 2003:03:26 02:14:50Z Mod Date : 2003:05:19 15:03:03+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : candy Metadata Date : 2003:05:19 15:03:03+08:00 Creator : candy Title : U-COVER.p65 Has XFA : NoEXIF Metadata provided by EXIF.tools