Compal Electronics SD4900 Smart Phone User Manual LF11 QG

Download:
Mirror Download [FCC.gov]
Document ID	2293481
Application ID	0W/z/tGunuAARShVY3iphQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.35kB (591845 bits)
Date Submitted	2014-06-12 00:00:00
Date Available	2014-12-10 00:00:00
Creation Date	2017-11-01 07:13:09
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-01 07:13:09
Document Title	LF11-QG
Document Creator	Adobe Illustrator CS6 (Windows)
Document Author:	IreneChung

i4900/i4901
Quick Start Guide
Welcome
Power button
Receiver
Volume
keys
Microphone
Please read this guide carefully before using your device. The guide will
help you learn tips on setting up and using your device.
The information in this guide is based on default settings. Illustrations and
screenshots used here may differ from the actual product appearance
and screen displays.
Getting Started
Earphone jack
Flash light
Rear camera
USB port
Speaker
Screen lock/unlock
In standby mode, press the Power button to lock your device. To unlock
the screen, press the Power button, and then drag the on-screen slider
to enter the interface displayed before it locks.
Sleep/Wake
If you do not touch the screen for a while, your device dims its screen to
enter sleep mode for power saving.
Turning your device off
Press and hold the Power button and then follow the on-screen instructions
to conirm shutdown.
Speciications
Model: i4900/i4901
Version: 3G+Wi-Fi
Hardware
&38
Dimension/Weight/Color
Dimension:127.49 x 64.38 x 14.57mm
Weight:117g
Camera
3MP (Rear)
CPU
MTK6572 Dual core 1GHz
Battery
1660mAh
GPS
Display
4” WVGA TFT
Operating System
Operating System
Android JB
Interface
3.5mm earphone jack
Micro USB
Dual SIM cards
micro SD card
(max. 32GB)
Communication
BT 4.0
3G WWAN
Wi-Fi
(802.11 b/g/n)
Preparing Your Phone
Installing the SIM cards, micro SD card, and battery
This device supports dual SIM cards. You need to insert the SIM card(s)
provided by your carrier to use cellular services.
1. Using your fingertip, pry
the right side of the back
cover first and then
remove it.
2. Insert the SIM cards and
the memory card.
3. Install the battery.
4. Replace the back cover.
Charging Your Device
When the battery level falls below the threshold, your device will alert you with
a tone and the battery status icon will change into .
To charge the battery, connect your device to a power outlet using the USB
cable and USB power adapter as shown above figure.
If your device is being charged while it is on, the battery status icon (located on
the status bar of the screen) will appear as .
After the battery has finished charging, the status bar will show the fully
charged icon .
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
Connecting Your Device to PC
You can connect your device to the PC's USB port with the cable provided for
battery charging or data transferring with the PC.
Installing apps and games
Transfer the APK setup file from the PC to your device, and then open and set
it up in the file manager on your device.
Communication
Wi-Fi connection
You can connect your device to the Internet
using Wi-Fi. When Wi-Fi is on, your device will
automatically scan for Wi-Fi hotspots within
range.
Select the Wi-Fi hotspot you want to connect to.
Mobile network connection
You can activate the mobile network data
connection and manage the mobile network
conigurations such as setting up the default
network connection, customizing the network
settings, and other general settings.
Bluetooth connection
If your computer has an integrated Bluetooth adapter card, it can connect
to and transfer data wirelessly with other Bluetooth enabled devices, such
as notebook computers, PDAs and cell phones. You can transfer data
between these devices without cables and up to 10 meters range in open
space.The actual maximum range may vary due to interference and
transmission barriers.
These functions require wireless-carrier support.
Making Calls
Touch Phone. Now you can choose to dial a speciic phone number or
select a contact from the call log or stored in your phone.
上海
Make a call
End a call
Mute/unmute the microphone
Turn speaker on/off
Set up conference call
Put the call on hold
Hide the keypad
Display the keypad
These functions require wireless-carrier support.
Sending a Message
Touch Messaging. Now you can use the message function to contact
your friends and family.
Compose new message
Search
Add an attachment
Insert the emoticon
symbol
Make a call
Add to Contacts
Send message
These functions require wireless-carrier support.
Browsing the Web
Touch Browser. Now you can browse the Web and download
applications.
Reload the current web
page
Stop loading the current
web page content
Go to the previous page
Go to the next page
Display active web pages in
windows
Select bookmarks,
history, or saved favorite
web page to visit
Open new browser window
Taking and Viewing Photos/Videos
Touch Camera. Now you can record the wonderful moments of your life
with the camera.
Touch Gallery. Now you can view photos/videos stored in your device.
Camera
The camera has three modes: camera, video camera, panoramic camera.
Gallery
You can zoom in/out a photo by double-tapping or moving your two ingers
apart/together while touching the screen.
Customizing the Desktop
Touch
> WIDGETS. Now you can drag your favorite applications and
widgets onto the desktop.
Adding apps/widgets to the desktop
Tap and hold the icon of your desired application or widget, until the
desktop background pattern appears on the screen, and then place the
icon wherever you wish.
Editing the desktop
Tap and hold any icon on the desktop and then drag it to your preferred
location or delete it from the desktop.
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modiications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Compliance (SAR)
This device is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission for an uncontrolled environment.
SAR compliance for body-worn operation is based on a separation
distance of 10 mm between the unit and the human body. Carry this
device at least 10 mm away from your body to ensure RF exposure
level remains at or below the maximum levels. To support body-worn
operation, choose the belt clips or holsters, which do not contain
metallic components, to maintain a separation of 10 mm between this
device and your body. RF exposure compliance with any of body-worn
accessory, which contains metal, was not tested and certiied, and use
such body-worn accessory should be avoided.
1. Health (Article 3.1(a) of the R&TTE Directive)
„ EN 62311: 2008, EN 50360:2001/A1:2012, EN 50566:2013
„ EN 62209-1:2006, EN 62209-2:2010, EN 62479:2010
2. Safety (Article 3.1(a) of the R&TTE Directive)
„ EN 60950-1:2006/A11:2009+A1:2010+A12:2011
„ EN 50332-1:2000, EN 50332-2:2003
3. Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive)
„ EN 301 489-1 V1.9.2, EN 301 489-3 V1.6.1
„ EN 301 489-7 V1.3.1, EN 301 489-17 V2.2.1, EN 301 489-24 V1.5.1
„ EN 55022:2010/ AC:2011 Class B, EN55024: 2010
„ EN 61000-3-2:2006/A1:2009/A2:2009, EN 61000-3-3:2008
4. Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive)
„ EN 301 511 V9.0.2, EN 301 908-1 V6.2.1
„ EN 301 908-2 V5.4.1, EN 300 328 V1.8.1
„ EN 300 440-1 V1.6.1, EN 300 440-2 V1.4.1
0984
Learn more
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
CE RF Exposure Compliance
This device meets the EU requirements (1999/519/EC) on the limitation
of exposure of the general public to electromagnetic ields by way of
health protection.
For body-worn operation, this device has been tested and meets the
ICNIRP exposure guidelines and the European Standard EN 62209-2,
for use with dedicated accessories. SAR is measured with this device
at a separation of 1.5 cm to the body, while transmitting at the highest
certiied output power level in all frequency bands of this device. Use
of other accessories which contain metals may not ensure compliance
with ICNIRP exposure guidelines.
xxxxxxxxxx
Printed in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : IreneChung
Create Date                     : 2014:02:21 16:01:51+08:00
Modify Date                     : 2014:02:21 16:07:58+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : LF11-QG
Creator                         : IreneChung
Metadata Date                   : 2014:02:21 16:07:58+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 100
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 12328 bytes, use -b option to extract)
Instance ID                     : uuid:8b3eb92e-8ca1-428a-83f8-1b680abdb944
Document ID                     : xmp.did:CF14A3C00792E31180EF99D97AB17A1D
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:ae8786dd-cd63-40c6-b6b2-e41107b824a6
Derived From Document ID        : xmp.did:8E60AAACB788E31199FAD76D03AF357B
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:EA398F6F1BF0E11189799C537FA177ED, xmp.iid:CF14A3C00792E31180EF99D97AB17A1D
History When                    : 2012:08:27 15:56:42+08:00, 2014:02:10 11:59:34+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : D:\Projects\Compal Communications\LF11\In Progress\icon-face.png, D:\Projects\Compal Communications\LF11\In Progress\icon-add.png, D:\PROJECTS\COMPAL COMMUNICATION\LF11\In Progress\OSD\7 Widget.png, D:\PROJECTS\COMPAL COMMUNICATION\LF11\In Progress\OSD\5 Browser.png, D:\PROJECTS\COMPAL COMMUNICATION\LF11\In Progress\OSD\4 Messaging.png, D:\PROJECTS\COMPAL COMMUNICATION\LF11\In Progress\OSD\1 Wi-Fi.png, C:\Users\guzy1\Desktop\豌豆荚截图20120830135029.jpg, C:\Users\guzy1\Desktop\豌豆荚截图20120830135029.jpg, C:\Users\guzy1\Desktop\豌豆荚截图20120830135029.jpg, C:\Users\guzy1\Desktop\豌豆荚截图20120830135029.jpg
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 73.999962
Max Page Size H                 : 109.999832
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT, HelveticaNeueLTStd-Lt, HelveticaNeueLTStd-Roman, HelveticaNeueLTStd-Bd, Wingdings-Regular, SimHei, AdobeSongStd-Light, HYb1gj
Font Family                     : Arial, Arial, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Wingdings, 黑体, Adobe 宋体 Std, HYb1gj GBpc-EUC-H
Font Face                       : Bold, Regular, 45 Light, 55 Roman, 75 Bold, Regular, Regular, L, GBpc-EUC-H
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown
Font Version                    : Version 5.06, Version 5.06, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, Version 1.047;PS 001.103;Core 1.0.38;makeotf.lib1.6.5960, OTF 1.029;PS 001.102;Core 1.0.33;makeotf.lib1.4.1585, Version 5.00, Version 5.01, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False, False, False
Font File Name                  : arialbd_0.ttf, arial_1.ttf, HelveticaNeueLTStd-Lt_1.otf, HelveticaNeueLTStd-Roman_2.otf, HelveticaNeueLTStd-Bd_1.otf, wingding.ttf, simhei.ttf, AdobeSongStd-Light.otf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 144 C
Swatch Groups Colorants L       : 68.627396
Swatch Groups Colorants A       : -14
Swatch Groups Colorants B       : 75
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 16

EXIF Metadata provided by EXIF.tools