Compass Systems 0307 Bluetooth GPS (2.4G) User Manual
Compass Systems Corp. Bluetooth GPS (2.4G)
User manual
GB737 Bluetooth GPS Receiver User manual Version 1.0 Introduction Tel: +886-2-8751-8598 Email: service@cpss.com.tw Fax: +886-2-8797-3898 Web: http://www.cpss.com.tw No part of this User’s Manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying recording ,for any purpose other than the purchaser’s personal use, without the written permission of Compass Systems Corp. Information in this User’s Manual is subject to change without notice. Compass Systems Corp. reserves the right to change or improve or modify its products and to make changes to the content without obligation to notify any person or organization of such changes. ©Copy right 2007 by Compass Systems Corp. All rights reserved. Printed in Taiwan Introduction WARNINGS WARNINGS Some Some certain certain knowledge knowledge is is required required to to be be well well known known by by the the user user for for proper proper and and safe safe use use of Navibe Bluetooth GPS receiver. Please read this User’s Manual first before operation. of Navibe Bluetooth GPS receiver. Please read this User’s Manual first before operation. Because Because Navibe Navibe Bluetooth Bluetooth GPS GPS receiver receiver is is an an assistant assistant device, device, itit will will NOT NOT undertake undertake any any legal responsibility for any accident or damage caused by the user’s wrong operation legal responsibility for any accident or damage caused by the user’s wrong operation and/or and/or wrong wrong judgement judgement in in navigating navigating with with Navibe. Navibe. ii Introduction CAUTION CAUTION The TheGlobal GlobalPositioning PositioningSystem(GPS) System(GPS)isisa asystem systemofof24 24satellites satelliteswhich whichcircle circlethe theearth earth twice twicea aday dayinina avery veryprecise preciseorbit orbitand andtransmit transmitinformation informationtotoearth. earth.The TheNavibe Navibeunit unit must mustcontinuously continuouslyfind findatatleast leastthree threeofofthese thesesatellites satellitestotocalculate calculateyour yourposition positionand and your movement. your movement. This ThisGPS GPSsystem systemisisoperated operatedby bythe thegovernment governmentofofthe theUnited UnitedStates, States,which whichisissolely solely responsible responsiblefor foritsitsaccuracy accuracyand andmaintenance. maintenance.Any Anychanges changesofofthe thesystem systemcould couldaffect affect the accuracy and performance of all GPS equipment. the accuracy and performance of all GPS equipment. PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE. PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE. (When fully charged, redred-color battery LED will automatically switch off.) (When fully charged, red-color battery LED will automatically switch off.) iii Introduction Thank you for choosing Navibe Bluetooth GPS Receiver! Take it now ------it can be your best friend! Application Conditions: Navibe is designed for outdoors navigation in the temperature range of -20°C~ 60°C. Because of the built-in battery, please don’t heat or leave the receiver in high temperature environment or direct sunshine for a long period of time. Introduction section gives you a general overview of Navibe features. Reference section tells how to operate the unit correctly and how to connect this unit to your pocket PC step-by-step. If you find something missing or damaged with the reference to the standard package, please contact the local dealer or retailer. iv Introduction Chapter I Introduction Section 1 Section 2 Section 3 Section 4 Section 5 Announcement Warnings Caution Welcome to Navibe Table of Contents ii iii iv Chapter II Reference Section 1 Section 2 Section 3 Section 4 Section 5 Hardware Description State Table of LED Operation Packet PC Setup Pair GB737 to your Packet PC Appendix FCC statement 3-4 5-9 10-14 Reference Section 1. Hardware Description Hardware Description Reference Section 2. State Table of LED GPS Status LED (Green) Description Green ON Looking for Satellites Green Flashing Satellites lucked Battery Status LED ( Red and Orange ) Description Red ON Low Power Orange ON Charging LED OFF Battery Charged Bluetooth Status LED (Blue) Description Blue Flashing Bluetooth Connected Blue ON Wait for Bluetooth pairing Reference Section 3. Operation -1 Turn on To turn on the receiver, press the power buttons on side for a few seconds until the GREEN GPS LED & BLUE Bluetooth LED indicators switch on. 1) To turn off the receiver, press the power switch on side for a few seconds until BLUE Bluetooth LED indicators switch off. Turn off 2) Auto power-off if Bluetooth is not connected to and host devices within 10 minutes for power-saving. Satellite Status The receiver will look for satellites automatically once power on and indicate the status by LED status. Reference Section 3. Operation -2 Bluetooth Device You may start to pair the receiver to a Bluetooth device when the LED indicator steady ON. When successfully connected to a Bluetooth device, the Bluetooth indicator will flash regularly. Make sure your Pocket PCs are ready for Bluetooth connections before device pairing. Low Power Charging When the power becomes low, the mini-USB power jack allows you to connect the device to a power source to recharge the internal battery. When fully charged, the indicator will auto switch off. Quick Shut To shut off the system rapidly when it responds slowly. Off Reference Section 4. Pocket PC Setup Pocket PC Setup 1. Tap the “Bluetooth” icon on screen. 2. Select “Bluetooth Manager” Reference Section 4. Pocket PC Setup Note: Note: Make sure BT receiver is in pairing mode before connectingPocket to your PC. PCPocket Setup PC. 3. Tap the “New” & “Connect!” in My Shortcuts screen. 4. Select “Explore a Bluetooth device” & tap “Next” in Connection Wizard screen Reference Section 4. Pocket PC Setup Pocket PC Setup 5. Follow the instruction or await for a while. 6. Tap “BT GPS V20” to continue. Reference Section 4. Pocket PC Setup Pocket PC Setup 7. Select “SPP” service and tap “Next”. 8. Tap “Finish” to close this program. Reference Section 4. Pocket PC Setup Pocket PC Setup 9. Tap “Connect” to activate the connection in My Shortcuts screen. 10. Key in the Passkey “0000” then tap “OK” Reference Section 5. Pair GB737 to your Pocket PC Pocket PC Setup Note: Note: Make sure your Pocket PC Bluetooth connection is ON before device pairing. 1. Tap the “Bluetooth” icon on main screen. 2. Select “Bluetooth Manager” 10 Reference Section 5. Pair GB737 to your Pocket PC Pocket PC Setup 11 3. Tap “Tools” then select “Paired devices” in My Shortcuts screen. 4. Tap “Add” Reference Section 5. Pair GB737 to your Pocket PC 3. Tap devices. icon to look up Bluetooth 4. Tap the device ID name “BT GPS V20” to continue. 12 Reference Section 5. Pair GB737 to your Pocket PC 13 5. Key in the passkey “0000” to start pairing. 6. Adding BT GPS V20 to device list. Reference Section 5. Pair GB737 to your Pocket PC 7. You may find the BT GPS V20 in the Paired devices screen. 14 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Compass Systems Corp. Tel: +886-2-8751-8598 Fax: +886-2-8797-3898 Email: service@cpss.com.tw http://www.cpss.com.tw ©Copy right 2007 by Compass Systems Corp. All rights reserved. Printed in Taiwan
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Keywords : Creator Tool : Acrobat PDFMaker 7.0.5 for PowerPoint Modify Date : 2007:05:15 16:01:57+08:00 Create Date : 2007:05:15 16:01:50+08:00 Metadata Date : 2007:05:15 16:01:57+08:00 Format : application/pdf Title : ?有幻?片?? Creator : Nora Description : Document ID : uuid:618f5cf0-6e32-4c76-b4cd-f4925e04c8b5 Instance ID : uuid:fd3adbfe-07cb-4bf3-8f52-15858af1808b Manager : Company : Oritron Comments : Category : Page Count : 21 Page Layout : SinglePage Subject : Author : NoraEXIF Metadata provided by EXIF.tools