Compex Systems 06-WLM54GP26 Wireless-G 26dBm Network Mini PCI Adapter User Manual

Compex Systems Pte Ltd Wireless-G 26dBm Network Mini PCI Adapter

UserManual.wiki >

Compex Systems >

06 WLM54GP26 User Manual

User Manual

Caution Changes or modifications not expressly approved by the party responsible for the compliance could void the user’s authority to operate the equipment. FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference received, including interference that may cause undesired operation.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20cm is maintained between the antenna and users. For laptop installations, the antenna must be installed to ensure that the proper spacing is maintained in the event the users places the upper portion of the LCD panel only to ensure 20cm will be maintained if the user places the device in their lap for use), and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as the 2 condition above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product . In these circumstances, the OEM integrator will be responsible for re-evaluating the end product ( including the transmitter) and obtaining a separate FCC authorization. End Product Labeling: This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users(for example access points, routers, wireless ADSL modems, certain laptop configurations, and similar equipment). The final end product must be labeled in a visible area with the following: Contains FCC ID:TK4-06-WLM54GP26 Manual information for End users The end user must not have manual instructions to remove or install the device. The user manual for end user must include the following information in a prominent location. IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter

Navigation menu