Compex Systems 09-MMNX WIRELESS-N NETWORK MINIPCI ADAPTER User Manual wlm200nx

Compex Systems Pte Ltd WIRELESS-N NETWORK MINIPCI ADAPTER wlm200nx

UserManual.wiki >

Compex Systems >

09 MMNX User Manual

Users Manual

WLM200NX MiniPCI network adapter provides leading 802.11a/b/g/n performance, supporting up to 300Mbps physical data rates and 200Mbps of actual user throughput on both the uplink and downlink. With the dual-band design you will enjoy universal connectivity to any 802.11 devicethrough your wireless AP or wireless Router. Built on Atheros chipset, it can be used with all draft IEEE 802.11ncompatible WLANs, and is ideally suited to be integrated into a widerange of OEM devices. Features • 2.4/5GHz IEEE 802.11a/b/g/n standard • Output Power of up to 20dBm @ a/b/g/n Band • Support for up to 2x2 MIMO with spatial multiplexing • Four times the throughput of 802.11b/g and 802.11a • Wireless Encryption and Authentication Supported • Transmission Power Control (TPC) • Enhanced performance with Atheros XSPAN technology Optimized for higher throughput at long range • High Performance (up to 300Mbps physical data rates and 200Mbps of actual throughput) with Low Power Consumption • Multi-Country Roaming Support (IEEE802.11d) • 2 X U.FL Antenna Connector • Suitable for Embedded System or OEM Project • Affordable and Ideal for a Variety of Applications • WLM200NX MINIPCI 2 x 2 802.11N MIMO mini-PCI Modules

Technical Specifications Chipset AR9220 Host Interface PCI Interface v2.3 (Type III-B Mini PCI form factor) Operating Voltage 3.3 VDC Power Consumption 2.4W Antenna Connector 2 x U.FL Antenna Connector IEEE 802.11a : 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps IEEE 802.11b : 11Mbps 5.5Mbps 2Mbps 1Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps automatically IEEE 802.11g : Fallback to 5.5Mbps, 2Mbps, 1Mbps 1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.) 20MHZ 2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.) 1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.) Data Rate IEEE 802.11n : 40MHz 2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.) Modulation Techniques OFMD: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK Security 64/128-bit WEP, TKIP, AES, IEEE802.1x authentication Certificate FCC, CE ROHS Compliance Yes Environment Specifications Operating: -20ºC to 70ºC Storage: -65ºC to 100º Humidity 5% to 95% (non-condensing) Dimension 59.6 x 51 x 3 mm WLM200NX MIMO MINIPCI CARD RADIO TX SPECIFICATIONS TX SPECIFICATIONS DataRate TX Power Tolerance DataRate TX Power Tolerance6-24Mbps 18dBm ±2dB 1Mbps 20dBm ±2dB 36Mbps 18dBm ±2dB 2Mbps 20dBm ±2dB 48Mbps 17dBm ±2dB 5.5Mbps 20dBm ±2dB 802.11a 54Mbps 16dBm ±2dB 802.11b11Mbps 20dBm ±2dB 6-24Mbps 20dBm ±2dB HT20 @800GI(400GI): +16 ~ +20dBm 36Mbps 19.5dBm ±2dB 2.4GHz HT40 @800GI(400GI): +14 ~ +18dBm 48Mbps 18.5dBm ±2dB 5GHz HT20 @800GI(400GI): +10 ~ +18dBm 802.11g 54Mbps 17dBm ±2dB 802.11n RX SPECIFICATIONS（802.11b） Data Rate Sensitivity (Typical/Maximum 2Rx) Tolerance 1M -96/-92Bm ±2dB 5.5M -94/-90dBm ±2dB 802.11b 11M -91/-87dBm ±2dB RX SPECIFICATIONS(802.11a) RX SPECIFICATIONS（802.11g） Data Rate Sensitivity (Typical/Maximum 2Rx) Tolerance Data Rate Sensitivity (Typical/Maximum 2Rx) Tolerance6M -95/-91dBm ±2dB 6M -96/-92dBm ±2dB 9M -95/-91dBm ±2dB 9M -96/-92dBm ±2dB 12M -95/-91dBm ±2dB 12M -96/-92dBm ±2dB 18M -94/-90dBm ±2dB 18M -95/-91dBm ±2dB 24M -90/-86dBm ±2dB 24M -92/-88dBm ±2dB 36M -87/-83dBm ±2dB 36M -89/-85dBm ±2dB 48M -83/-79dBm ±2dB 48M -85/-81dBm ±2dB 802.11a 54M -82/-78dBm ±2dB 802.11g54M -83/-79dBm ±2dB

MCS0 -95/-91dBm ±2dB MCS0 -96/-92dBm ±2dB MCS1 -94/-90dBm ±2dB MCS1 -95/-91dBm ±2dB MCS2 -92/-88dBm ±2dB MCS2 -93/-89dBm ±2dB MCS3 -88/-84dBm ±2dB MCS3 -90/-86dBm ±2dB MCS4 -85/-81dBm ±2dB MCS4 -87/-81dBm ±2dB MCS5 -81/-77dBm ±2dB MCS5 -83/-76dBm ±2dB MCS6 -80/-76dBm ±2dB MCS6 -81/-76dBm ±2dB MCS7 -77/-73dBm ±2dB MCS7 -79/-73dBm ±2dB MCS8 -94/-90dBm ±2dB MCS8 -95/-91dBm ±2dB MCS9 -92/-87dBm ±2dB MCS9 -93/-89dBm ±2dB MCS10 -89/-85dBm ±2dB MCS10 -90/-86dBm ±2dB MCS11 -86/-82dBm ±2dB MCS11 -87/-83dBm ±2dB MCS12 -83/-79dBm ±2dB MCS12 -84/-80dBm ±2dB MCS13 -78/-74dBm ±2dB MCS13 -79/-75dBm ±2dB MCS14 -77/-73dBm ±2dB MCS14 -77/-73dBm ±2dB 802.11a/n HT20 MCS15 -74/-69dBm ±2dB 802.11 b/g/n HT20 MCS15 -75/-71dBm ±2dB MCS0 -91/-87dBm ±2dB MCS0 -90/-86dBm ±2dB MCS1 -90/-86dBm ±2dB MCS1 -90/-86dBm ±2dB MCS2 -88/-84dBm ±2dB MCS2 -89/-85dBm ±2dB MCS3 -85/-81dBm ±2dB MCS3 -87/-82dBm ±2dB MCS4 -82/-78dBm ±2dB MCS4 -84/-79dBm ±2dB MCS5 -78/-74dBm ±2dB MCS5 -79/-75dBm ±2dB MCS6 -77/-73dBm ±2dB MCS6 -78/-74dBm ±2dB MCS7 -74/-70dBm ±2dB MCS7 -75/-71dBm ±2dB MCS8 -91/-87dBm ±2dB MCS8 -90/-86dBm ±2dB MCS9 -88/-84dBm ±2dB MCS9 -89/-85dBm ±2dB MCS10 -86/-82dBm ±2dB MCS10 -87/-83dBm ±2dB MCS11 -83/-79dBm ±2dB MCS11 -84/-80dBm ±2dB MCS12 -80/-76dBm ±2dB MCS12 -81/-77dBm ±2dB MCS13 -75/-71dBm ±2dB MCS13 -76/-72dBm ±2dB MCS14 -73/-69dBm ±2dB MCS14 -74/-68dBm ±2dB 802.11a/n HT40 MCS15 -70/-66dBm ±2dB 802.11 b/g/n HT40 MCS15 -71/-67dBm ±2dB DRIVER INFORMATION Driver Linux Madwifi, WindowsXP , Windows 2000,Windwos Vista ORDERING CONFIGURATIONS① CODES SPEED Carton Dimension WLM200NX 6AA1100 Up to 300 Mbps physical data ratesWLM200NX 6AA1300 Up to 300 Mbps physical data ratesFor 50pcs (pcs/ctn), 0.40m * 0.22m * 0.085m / 0.006 = 1.5KG For 250pc (pcs/ctn), 0.45m * 0.45m * 0.24m / 0.006 = 8.1KG c Configurations are subjected to change without notice

COMPLIANCE INFORMATION FCC NOTICE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Connect the computer into an outlet on a circuit different from that to which the receiver is connected. • Increase the separation between the computer and receiver. • Consult the dealer or an experienced radio/TV technician for help. This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product which integrates this module. 30cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 30cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: TK4-09-MMNX ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also

be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE REGARDING ANTENNA USE Antenna Use 2x2 Operation 1x1 Operation Chain1 Chain2 Chain1

DIMENSIONS DRAWING

Navigation menu